aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-18exec: introduce tlb_initEmilio G. Cota
Paves the way for the addition of a per-TLB lock. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181009174557.16125-4-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18target/unicore32: remove tlb_flush from uc32_init_fnEmilio G. Cota
As far as I can tell tlb_flush does not need to be called this early. tlb_flush is eventually called after the CPU has been realized. This change paves the way to the introduction of tlb_init, which will be called from cpu_exec_realizefn. Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181009174557.16125-3-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18target/alpha: remove tlb_flush from alpha_cpu_initfnEmilio G. Cota
As far as I can tell tlb_flush does not need to be called this early. tlb_flush is eventually called after the CPU has been realized. This change paves the way to the introduction of tlb_init, which will be called from cpu_exec_realizefn. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181009174557.16125-2-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18tcg: distribute tcg_time into TCG contextsEmilio G. Cota
When we implemented per-vCPU TCG contexts, we forgot to also distribute the tcg_time counter, which has remained as a global accessed without any serialization, leading to potentially missed counts. Fix it by distributing the field over the TCG contexts, embedding it into TCGProfile with a field called "cpu_exec_time", which is more descriptive than "tcg_time". Add a function to query this value directly, and for completeness, fill in the field in tcg_profile_snapshot, even though its callers do not use it. Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181010144853.13005-5-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18tcg: plug holes in struct TCGProfileEmilio G. Cota
This plugs two 4-byte holes in 64-bit. Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181010144853.13005-4-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18tcg: fix use of uninitialized variable under CONFIG_PROFILEREmilio G. Cota
We forgot to initialize n in commit 15fa08f845 ("tcg: Dynamically allocate TCGOps", 2017-12-29). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181010144853.13005-3-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18tcg: access cpu->icount_decr.u16.high with atomicsEmilio G. Cota
Consistently access u16.high with atomics to avoid undefined behaviour in MTTCG. Note that icount_decr.u16.low is only used in icount mode, so regular accesses to it are OK. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181010144853.13005-2-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18tcg: Implement CPU_LOG_TB_NOCHAIN during expansionRichard Henderson
Rather than test NOCHAIN before linking, do not emit the goto_tb opcode at all. We already do this for goto_ptr. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18target/mips: Add opcodes for nanoMIPS EVA instructionsDimitrije Nikolic
Add opcodes for nanoMIPS EVA instructions: CACHEE, LBE, LBUE, LHE, LHUE, LLE, LLWPE, LWE, PREFE, SBE, SCE, SCWPE, SHE, SWE. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Dimitrije Nikolic <dnikolic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Fix misplaced 'break' in handling of NM_SHRA_R_PHStefan Markovic
Fix misplaced 'break' in handling of NM_SHRA_R_PH. Found by Coverity (CID 1395627). Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Fix emulation of microMIPS R6 <SELEQZ|SELNEZ>.<D|S>Matthew Fortune
Fix emulation of microMIPS R6 <SELEQZ|SELNEZ>.<D|S> instructions. Their handling was permuted. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Matthew Fortune <matthew.fortune@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Implement hardware page table walker for MIPS32Yongbok Kim
Implement hardware page table walker. This implementation is limiter only to MIPS32. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add reset state for PWSize and PWField registersYongbok Kim
Add reset state for PWSize and PWField registers. The reset state is different for pre-R6 and R6 (and post-R6) ISAa. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add CP0 PWCtl registerYongbok Kim
Add PWCtl register (CP0 Register 5, Select 6). The PWCtl register configures hardware page table walking for TLB refills. This register is required for the hardware page walker feature. It exists only if Config3 PW bit is set to 1. It contains following fields: PWEn (31) - Hardware Page Table walker enable PWDirExt (30) - If 1, 4-th level implemented (MIPS64 only) XK (28) - If 1, walker handles xkseg (MIPS64 only) XS (27) - If 1, walker handles xsseg (MIPS64 only) XU (26) - If 1, walker handles xuseg (MIPS64 only) DPH (7) - Dual Page format of Huge Page support HugePg (6) - Huge Page PTE supported in Directory levels PSn (5..0) - Bit position of PTEvld in Huge Page PTE Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add CP0 PWSize registerYongbok Kim
Add PWSize register (CP0 Register 5, Select 7). The PWSize register configures hardware page table walking for TLB refills. This register is required for the hardware page walker feature. It exists only if Config3 PW bit is set to 1. It contains following fields: BDW (37..32) Base Directory index width (MIPS64 only) GDW (29..24) Global Directory index width UDW (23..18) Upper Directory index width MDW (17..12) Middle Directory index width PTW (11..6 ) Page Table index width PTEW ( 5..0 ) Left shift applied to the Page Table index Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add CP0 PWField registerYongbok Kim
Add PWField register (CP0 Register 5, Select 6). The PWField register configures hardware page table walking for TLB refills. This register is required for the hardware page walker feature. It exists only if Config3 PW bit is set to 1. It contains following fields: MIPS64: BDI (37..32) - Base Directory index GDI (29..24) - Global Directory index UDI (23..18) - Upper Directory index MDI (17..12) - Middle Directory index PTI (11..6 ) - Page Table index PTEI ( 5..0 ) - Page Table Entry shift MIPS32: GDW (29..24) - Global Directory index UDW (23..18) - Upper Directory index MDW (17..12) - Middle Directory index PTW (11..6 ) - Page Table index PTEW ( 5..0 ) - Page Table Entry shift Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add CP0 PWBase registerYongbok Kim
Add PWBase register (CP0 Register 5, Select 5). The PWBase register contains the Page Table Base virtual address. This register is required for the hardware page walker feature. It exists only if Config3 PW bit is set to 1. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add CP0 Config2 to DisasContextStefan Markovic
Add field corresponding to CP0 Config2 to DisasContext. This is needed for availability control via Config2 bits. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Improve DSP R2/R3-related namingStefan Markovic
Do following replacements: ASE_DSPR2 -> ASE_DSP_R2 ASE_DSPR3 -> ASE_DSP_R3 MIPS_HFLAG_DSPR2 -> MIPS_HFLAG_DSP_R2 MIPS_HFLAG_DSPR3 -> MIPS_HFLAG_DSP_R3 check_dspr2() -> check_dsp_r2() check_dspr3() -> check_dsp_r3() and several other similar minor replacements. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add availability control for DSP R3 ASEStefan Markovic
Add infrastructure for availability control for DSP R3 ASE MIPS instructions. Only BPOSGE32C currently belongs to DSP R3 ASE, but this is likely to be changed in near future. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add bit definitions for DSP R3 ASEStefan Markovic
Add DSP R3 ASE related bit definition for insn_flags and hflags. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Reorganize bit definitions for insn_flags (ISAs/ASEs flags)Philippe Mathieu-Daudé
Distribute bits 56-63 vendor-specific ASEs as follows: - bits 0-31 MIPS base instruction sets - bits 32-47 MIPS ASEs - bits 48-55 vendor-specific base instruction sets - bits 56-63 vendor-specific ASEs Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Increase 'supported ISAs/ASEs' flag holder sizePhilippe Mathieu-Daudé
Increase the size of insn_flags holder size to 64 bits. This is needed for future extensions since existing bits are almost all used. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add opcode values of MXU ASEAleksandar Markovic
Add opcode values for all instructions in MXU ASE. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add organizational chart of MXU ASEAleksandar Markovic
Add a comment that contains an organizational chart of MXU ASE instructions. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add assembler mnemonics list for MXU ASEAleksandar Markovic
Add a comment that contains a list all MXU instructions, expressed in assembler mnemonics. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add basic description of MXU ASEAleksandar Markovic
Add a comment that contains a basic description of MXU ASE. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add a comment before each CP0 register section in cpu.hAleksandar Markovic
Add a comment before each CP0 register section in CPUMIPSState definition, thus visually separating these sections. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18target/mips: Add a comment with an overview of CP0 registersAleksandar Markovic
Add a comment with an overview of CP0 registers close to the definition of their corresponding fields in CPUMIPSState. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18linux-user: Add infrastructure for handling MIPS-specific prctl()Stefan Markovic
Add infrastructure for handling MIPS-specific prctl(). This is, for now, just an empty placeholder. The real handling will be implemented in subsequent patches. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18linux-user: Add MIPS-specific prctl() optionsStefan Markovic
Add MIPS-specific prctl() options TARGET_PR_SET_FP_MODE and TARGET_PR_SET_FP_MODE. These values are essentially copied from linux kernel header include/uapi/linux/prctl.h. This is done in a way consistent with a similar case of aarch64-specific prctl() options TARGET_PR_SVE_SET_VL and TARGET_PR_SVE_GET_VL. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18elf: Fix comments to EF_MIPS_MACH_xxx constantsFredrik Noring
Regarding R5900 CPU, some sources indicate that the Emotion Engine ISA/ASE was designed by Toshiba and licensed to Sony. Others sources claim it was a joint effort. It therefore makes sense to refer to the CPU as "Toshiba/Sony R5900". Also, remove and "'s" in the line for some other CPU, for the sake of consistency. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reported-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18elf: Add Mips_elf_abiflags_v0 structureStefan Markovic
Add Mips_elf_abiflags_v0 structure to elf.h. The source of information is kernel header arch/mips/include/asm/elf.h. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18elf: Add MIPS_ABI_FP_XXX constantsStefan Markovic
Add MIPS_ABI_FP_XXX constants to elf.h. The source of information is kernel header arch/mips/include/asm/elf.h. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18elf: Fix PT_MIPS_XXX constantsStefan Markovic
Fix existing and add missing PT_MIPS_XXX constants in elf.h. This is copied from kernel header arch/mips/include/asm/elf.h. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18mailmap: Add an item for Yongbok KimAleksandar Markovic
Yongbok Kim used two email adresses for QEMU contributions - his company changed its ownership/name. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-18linux-user/sparc/signal.c: Remove unnecessary commentPeter Maydell
Remove a comment suggesting that we need to call tb_flush() after writing the SPARC signal frame trampoline insns. This isn't necessary in QEMU, because (even if the guest architecture requires explicit icache maintenance) we ensure that memory writes result in invalidation of translated code from that memory. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20181009184017.15675-1-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-10-18linux-user: Suppress address-of-packed-member warnings in __get/put_user_ePeter Maydell
Our __get_user_e() and __put_user_e() macros cause newer versions of clang to generate false-positive -Waddress-of-packed-member warnings if they are passed the address of a member of a packed struct (see https://bugs.llvm.org/show_bug.cgi?id=39113). Suppress these using the _Pragma() operator. Unfortunately _Pragma() support in gcc is broken in some gcc versions and in some usage contexts, so we limit the pragma usage here to clang. To put in the pragmas we need to convert the macros from expressions to statements, but all the callsites effectively treat them as statements already so this is OK. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20181009161814.21257-1-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-10-18Merge remote-tracking branch ↵Peter Maydell
'remotes/huth-gitlab/tags/pull-request-2018-10-17' into staging - Updates for qtest entries in test/Makefile.include - Simple updates for some shell scripts - Misc simple patches for files without regular subsystem pull requests # gpg: Signature made Wed 17 Oct 2018 08:20:35 BST # gpg: using RSA key 2ED9D774FE702DB5 # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" # gpg: aka "Thomas Huth <thuth@redhat.com>" # gpg: aka "Thomas Huth <huth@tuxfamily.org>" # gpg: aka "Thomas Huth <th.huth@posteo.de>" # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2018-10-17: configure: remove glib_subprocess check hw/core/generic-loader: Compile only once, not for each target cpu: Provide a proper prototype for target_words_bigendian() in a header hw/core/generic-loader: Set a category for the generic-loader device qemu/compiler: Wrap __attribute__((flatten)) in a macro mailmap: Fix Reimar Döffinger name show-fixed-bugs.sh: Modern shell scripting (use $() instead of ``) git-submodule.sh: Modern shell scripting (use $() instead of ``) archive-source.sh: Modern shell scripting (use $() instead of ``) MAINTAINERS: update block/sheepdog maintainers gdbstub: Remove unused include tests: remove gcov-files- variables tests: Prevent more accidental test disabling target/cris/translate: Get rid of qemu_log_separate() qemu-common.h: update copyright date to 2018 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-18Merge remote-tracking branch 'remotes/rth/tags/pull-hppa-20181016' into stagingPeter Maydell
Queued hppa patch # gpg: Signature made Tue 16 Oct 2018 23:45:46 BST # gpg: using RSA key 64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-hppa-20181016: target/hppa: Raise exception 26 on emulated hardware Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-17RISC-V: Don't add NULL bootargs to device-treeMichael Clark
Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-17RISC-V: Add missing free for plic_hart_configMichael Clark
Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-17RISC-V: Update CSR and interrupt definitionsMichael Clark
* Add user-mode CSR defininitions. * Reorder CSR definitions to match the specification. * Change H mode interrupt comment to 'reserved'. * Remove unused X_COP interrupt. * Add user-mode interrupts. * Remove erroneous until comments on machine mode interrupts. * Move together paging mode and page table bit definitions. * Move together interrupt and exception cause definitions. Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-17RISC-V: Move non-ops from op_helper to cpu_helperMichael Clark
This patch makes op_helper.c contain only instruction operation helpers used by translate.c and moves any unrelated cpu helpers into cpu_helper.c. No logic is changed by this patch. Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-17RISC-V: Allow setting and clearing multiple irqsMichael Clark
Change the API of riscv_set_local_interrupt to take a write mask and value to allow setting and clearing of multiple local interrupts atomically in a single call. Rename the new function to riscv_cpu_update_mip. Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-17configure: remove glib_subprocess checkMarc-André Lureau
This should have been removed as part of commit 692fbdf9f4c6f6bafd0b3a4d4f94973effd3bbae. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-10-17hw/core/generic-loader: Compile only once, not for each targetThomas Huth
The generic-loader is currently compiled target specific due to one single "#ifdef TARGET_WORDS_BIGENDIAN" in the file. We have already a function called target_words_bigendian() for this instead, so we can put the generic-loader into common-obj to save some compilation time. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-10-17cpu: Provide a proper prototype for target_words_bigendian() in a headerThomas Huth
We've got three places already that provide a prototype for this function in a .c file - that's ugly. Let's provide a proper prototype in a header instead, with a proper description why this function should not be used in most cases. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-10-17hw/core/generic-loader: Set a category for the generic-loader deviceThomas Huth
Each device that is instantiatable by the users should be marked with a category. Since the generic-loader does not fit anywhere else, put it into the MISC category. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-10-17qemu/compiler: Wrap __attribute__((flatten)) in a macroThomas Huth
Older versions of Clang (before 3.5) and GCC (before 4.1) do not support the "__attribute__((flatten))" yet. We don't care about such old versions of GCC anymore, but since Clang 3.4 is still used in EPEL for RHEL7 / CentOS 7, we should not use this attribute directly but with a wrapper macro instead. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 18:14:23 +0000