aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-24hw/timer/sun4v-rtc: Convert from DPRINTF() macro to trace eventsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20181002212522.23303-3-f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24trace-events: Fix copy/paste typoPhilippe Mathieu-Daudé
Missed while reviewing 5dd85b4b486. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20181002212522.23303-2-f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24vl:c: make sure that sockets are calculated correctly in '-smp X' caseIgor Mammedov
commit (5cdc9b76e3 vl.c: Remove dead assignment) removed sockets calculation when 'sockets' weren't provided on CLI since there wasn't any users for it back then. Exiting checks are neither reachable } else if (sockets * cores * threads < cpus) { or nor triggerable if (sockets * cores * threads > max_cpus) so we weren't noticing wrong topology since then, since users recalculate sockets adhoc on their own. However with deprecation check it becomes noticable, for example -smp 2 will start printing warning: "warning: Invalid CPU topology deprecated: sockets (1) * cores (1) * threads (1) != maxcpus (2)" calculating sockets if they weren't specified. Fix it by returning back sockets calculation if it's omitted on CLI. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-Id: <1536836762-273036-3-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24vl.c deprecate incorrect CPUs topologyIgor Mammedov
-smp [cpus],sockets/cores/threads[,maxcpus] should describe topology so that total number of logical CPUs [sockets * cores * threads] would be equal to [maxcpus], however historically we didn't have such check in QEMU and it is possible to start VM with an invalid topology. Deprecate invalid options combination so we can make sure that the topology VM started with is always correct in the future. Users with an invalid sockets/cores/threads/maxcpus values should fix their CLI to make sure that [sockets * cores * threads] == [maxcpus] Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1536836762-273036-2-git-send-email-imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [ehabkost: squashed unit test fix] Message-Id: <20181019215345.521d58d7@igors-macbook-pro.local> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24hostmem-file: fixed the memory leak while get pmem path.Zhang Yi
object_get_canonical_path_component() returns a string which must be freed using g_free(). Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Zhang Yi <yi.z.zhang@linux.intel.com> Message-Id: <7328fb16c394eaf5d65437d11c2a9343647b6d3d.1535471899.git.yi.z.zhang@linux.intel.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24target/arm: Only flush tlb if ASID changesRichard Henderson
Since QEMU does not implement ASIDs, changes to the ASID must flush the tlb. However, if the ASID does not change there is no reason to flush. In testing a boot of the Ubuntu installer to the first menu, this reduces the number of flushes by 30%, or nearly 600k instances. Reviewed-by: Aaron Lindsay <aaron@os.amperecomputing.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181019015617.22583-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Remove writefn from TTBR0_EL3Richard Henderson
The EL3 version of this register does not include an ASID, and so the tlb_flush performed by vmsa_ttbr_write is not needed. Reviewed-by: Aaron Lindsay <aaron@os.amperecomputing.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20181019015617.22583-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24net: cadence_gem: Announce 64bit addressing supportEdgar E. Iglesias
Announce 64bit addressing support. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20181017213932.19973-3-edgar.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24net: cadence_gem: Announce availability of priority queuesEdgar E. Iglesias
Announce the availability of the various priority queues. This fixes an issue where guest kernels would miss to configure secondary queues due to inproper feature bits. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20181017213932.19973-2-edgar.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Reorg NEON VLD/VST single element to one laneRichard Henderson
Instead of shifts and masks, use direct loads and stores from the neon register file. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-21-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Promote consecutive memory ops for aa32Richard Henderson
For a sequence of loads or stores from a single register, little-endian operations can be promoted to an 8-byte op. This can reduce the number of operations by a factor of 8. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-20-richard.henderson@linaro.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Reorg NEON VLD/VST all elementsRichard Henderson
Instead of shifts and masks, use direct loads and stores from the neon register file. Mirror the iteration structure of the ARM pseudocode more closely. Correct the parameters of the VLD2 A2 insn. Note that this includes a bugfix for handling of the insn "VLD2 (multiple 2-element structures)" -- we were using an incorrect stride value. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-19-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON VLD all lanesRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-18-richard.henderson@linaro.org [PMM: added parens in ?: expression] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON_3R_VTST_VCEQ, NEON_3R_VCGT, NEON_3R_VCGERichard Henderson
Move cmtst_op expanders from translate-a64.c. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-17-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON_3R_VMLRichard Henderson
Move mla_op and mls_op expanders from translate-a64.c. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-16-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for VSRI, VSLIRichard Henderson
Move shi_op and sli_op expanders from translate-a64.c. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-15-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for VSRARichard Henderson
Move ssra_op and usra_op expanders from translate-a64.c. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-14-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for VSHR, VSHLRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-13-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON_3R_VMULRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-12-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON_2RM_VMN, NEON_2RM_VNEGRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-11-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON_3R_VADD_VSUB insnsRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-10-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON_3R_LOGIC insnsRichard Henderson
Move expanders for VBSL, VBIT, and VBIF from translate-a64.c. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-9-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON VMOV, VMVN, VBIC & VORR (immediate)Richard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use gvec for NEON VDUPRichard Henderson
Also introduces neon_element_offset to find the env offset of a specific element within a neon register. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-7-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Mark some arrays constRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181011205206.3552-6-richard.henderson@linaro.org [PMM: drop change to now-deleted cpu_mode_names array] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Promote consecutive memory ops for aa64Richard Henderson
For a sequence of loads or stores from a single register, little-endian operations can be promoted to an 8-byte op. This can reduce the number of operations by a factor of 8. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Use tcg_gen_gvec_dup_i64 for LD[1-4]RRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181011205206.3552-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Don't call tcg_clear_temp_countRichard Henderson
This is done generically in translator_loop. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181011205206.3552-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Hoist address increment for vector memory opsRichard Henderson
This can reduce the number of opcodes required for certain complex forms of load-multiple (e.g. ld4.16b). Signed-off-by: Richard Henderson <rth@twiddle.net> Message-id: 20181011205206.3552-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24hw/arm/boot: Increase compliance with kernel arm64 boot protocolStewart Hildebrand
"The Image must be placed text_offset bytes from a 2MB aligned base address anywhere in usable system RAM and called there." For the virt board, we write our startup bootloader at the very bottom of RAM, so that bit can't be used for the image. To avoid overlap in case the image requests to be loaded at an offset smaller than our bootloader, we increment the load offset to the next 2MB. This fixes a boot failure for Xen AArch64. Signed-off-by: Stewart Hildebrand <stewart.hildebrand@dornerworks.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Message-id: b8a89518794b4436af0c151ed10de4fa@dornerworks.com [PMM: Rephrased a comment a bit] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Report correct syndrome for FP/SIMD traps to Hyp modePeter Maydell
For traps of FP/SIMD instructions to AArch32 Hyp mode, the syndrome provided in HSR has more information than is reported to AArch64. Specifically, there are extra fields TA and coproc which indicate whether the trapped instruction was FP or SIMD. Add this extra information to the syndromes we construct, and mask it out when taking the exception to AArch64. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-11-peter.maydell@linaro.org
2018-10-24target/arm: Get IL bit correct for v7 syndrome valuesPeter Maydell
For the v7 version of the Arm architecture, the IL bit in syndrome register values where the field is not valid was defined to be UNK/SBZP. In v8 this is RES1, which is what QEMU currently implements. Handle the desired v7 behaviour by squashing the IL bit for the affected cases: * EC == EC_UNCATEGORIZED * prefetch aborts * data aborts where ISV is 0 (The fourth case listed in the v8 Arm ARM DDI 0487C.a in section G7.2.70, "illegal state exception", can't happen on a v7 CPU.) This deals with a corner case noted in a comment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-10-peter.maydell@linaro.org
2018-10-24target/arm: New utility function to extract EC from syndromePeter Maydell
Create and use a utility function to extract the EC field from a syndrome, rather than open-coding the shift. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-9-peter.maydell@linaro.org
2018-10-24target/arm: Implement HCR.PTWPeter Maydell
If the HCR_EL2 PTW virtualizaiton configuration register bit is set, then this means that a stage 2 Permission fault must be generated if a stage 1 translation table access is made to an address that is mapped as Device memory in stage 2. Implement this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-8-peter.maydell@linaro.org
2018-10-24target/arm: Implement HCR.VI and VFPeter Maydell
The HCR_EL2 VI and VF bits are supposed to track whether there is a pending virtual IRQ or virtual FIQ. For QEMU we store the pending VIRQ/VFIQ status in cs->interrupt_request, so this means: * if the register is read we must get these bit values from cs->interrupt_request * if the register is written then we must write the bit values back into cs->interrupt_request Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-7-peter.maydell@linaro.org
2018-10-24target/arm: ISR_EL1 bits track virtual interrupts if IMO/FMO setPeter Maydell
The A/I/F bits in ISR_EL1 should track the virtual interrupt status, not the physical interrupt status, if the associated HCR_EL2.AMO/IMO/FMO bit is set. Implement this, rather than always showing the physical interrupt status. We don't currently implement anything to do with external aborts, so this applies only to the I and F bits (though it ought to be possible for the outer guest to present a virtual external abort to the inner guest, even if QEMU doesn't emulate physical external aborts, so there is missing functionality in this area). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-6-peter.maydell@linaro.org
2018-10-24target/arm: Implement HCR.DCPeter Maydell
The HCR.DC virtualization configuration register bit has the following effects: * SCTLR.M behaves as if it is 0 for all purposes except direct reads of the bit * HCR.VM behaves as if it is 1 for all purposes except direct reads of the bit * the memory type produced by the first stage of the EL1&EL0 translation regime is Normal Non-Shareable, Inner Write-Back Read-Allocate Write-Allocate, Outer Write-Back Read-Allocate Write-Allocate. Implement this behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-5-peter.maydell@linaro.org
2018-10-24target/arm: Implement HCR.FBPeter Maydell
The HCR.FB virtualization configuration register bit requests that TLB maintenance, branch predictor invalidate-all and icache invalidate-all operations performed in NS EL1 should be upgraded from "local CPU only to "broadcast within Inner Shareable domain". For QEMU we NOP the branch predictor and icache operations, so we only need to upgrade the TLB invalidates: AArch32 TLBIALL, TLBIMVA, TLBIASID, DTLBIALL, DTLBIMVA, DTLBIASID, ITLBIALL, ITLBIMVA, ITLBIASID, TLBIMVAA, TLBIMVAL, TLBIMVAAL AArch64 TLBI VMALLE1, TLBI VAE1, TLBI ASIDE1, TLBI VAAE1, TLBI VALE1, TLBI VAALE1 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-4-peter.maydell@linaro.org
2018-10-24target/arm: Make switch_mode() file-localPeter Maydell
The switch_mode() function is defined in target/arm/helper.c and used only in that file and nowhere else, so we can make it file-local rather than global. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-3-peter.maydell@linaro.org
2018-10-24target/arm: Improve debug logging of AArch32 exception returnPeter Maydell
For AArch32, exception return happens through certain kinds of CPSR write. We don't currently have any CPU_LOG_INT logging of these events (unlike AArch64, where we log in the ERET instruction). Add some suitable logging. This will log exception returns like this: Exception return from AArch32 hyp to usr PC 0x80100374 paralleling the existing logging in the exception_return helper for AArch64 exception returns: Exception return from AArch64 EL2 to AArch64 EL0 PC 0x8003045c Exception return from AArch64 EL2 to AArch32 EL0 PC 0x8003045c (Note that an AArch32 exception return can only be AArch32->AArch32, never to AArch64.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181012144235.19646-2-peter.maydell@linaro.org
2018-10-24target/arm: Convert v8.2-fp16 from feature bit to aa64pfr0 testRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-9-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Convert sve from feature bit to aa64pfr0 testRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Convert jazelle from feature bit to isar1 testRichard Henderson
Having V6 alone imply jazelle was wrong for cortex-m0. Change to an assertion for V6 & !M. This was harmless, because the only place we tested ARM_FEATURE_JAZELLE was for 'bxj' in disas_arm(), which is unreachable for M-profile cores. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Convert division from feature bits to isar0 testsRichard Henderson
Both arm and thumb2 division are controlled by the same ISAR field, which takes care of the arm implies thumb case. Having M imply thumb2 division was wrong for cortex-m0, which is v6m and does not have thumb2 at all, much less thumb2 division. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Convert v8 extensions from feature bits to isar testsRichard Henderson
Most of the v8 extensions are self-contained within the ISAR registers and are not implied by other feature bits, which makes them the easiest to convert. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: V8M should not imply V7VERichard Henderson
Instantiating mps2-an505 (cortex-m33) will fail make check when V7VE asserts that ID_ISAR0.Divide includes ARM division. It is also wrong to include ARM_FEATURE_LPAE. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Move some system registers into a substructureRichard Henderson
Create struct ARMISARegisters, to be accessed during translation. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181016223115.24100-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24target/arm: Add support for VCPU event statesDongjiu Geng
This patch extends the qemu-kvm state sync logic with support for KVM_GET/SET_VCPU_EVENTS, giving access to yet missing SError exception. And also it can support the exception state migration. The SError exception states include SError pending state and ESR value, the kvm_put/get_vcpu_events() will be called when set or get system registers. When do migration, if source machine has SError pending, QEMU will do this migration regardless whether the target machine supports to specify guest ESR value, because if target machine does not support that, it can also inject the SError with zero ESR value. Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1538067351-23931-3-git-send-email-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24ssi-sd: Make devices picking up backends unavailable with -deviceMarkus Armbruster
Device models aren't supposed to go on fishing expeditions for backends. They should expose suitable properties for the user to set. For onboard devices, board code sets them. Device ssi-sd picks up its block backend in its init() method with drive_get_next() instead. This mistake is already marked FIXME since commit af9e40a. Unset user_creatable to remove the mistake from our external interface. Since the SSI bus doesn't support hotplug, only -device can be affected. Only certain ARM machines have ssi-sd and provide an SSI bus for it; this patch breaks -device ssi-sd for these machines. No actual use of -device ssi-sd is known. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Thomas Huth <thuth@redhat.com> Message-id: 20181009060835.4608-1-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24configure: Provide option to explicitly disable AVX2Liam Merwick
The configure script detects if the compiler has AVX2 support and automatically sets avx2_opt="yes" which in turn defines CONFIG_AVX2_OPT. There is no way of explicitly overriding this setting so this commit adds two command-line options: --enable-avx2 and --disable-avx2. The default behaviour, when no option is specified, is to maintain the current behaviour and enable AVX2 if the compiler supports it. Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com> Reviewed-by: Darren Kenny <Darren.Kenny@oracle.com> Reviewed-by: Mark Kanda <Mark.Kanda@oracle.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 04:08:47 +0000