| Age | Commit message (Collapse) | Author |
|---|
|
This is a reimplementation of prior versions which adds
the ability to define cpu models for contemporary processors.
The added models are likewise selected via -cpu <name>,
and are intended to displace the existing convention
of "-cpu qemu64" augmented with a series of feature flags.
A primary motivation was determination of a least common
denominator within a given processor class to simplify guest
migration. It is still possible to modify an arbitrary model
via additional feature flags however the goal here was to
make doing so unnecessary in typical usage. The other
consideration was providing models names reflective of
current processors. Both AMD and Intel have reviewed the
models in terms of balancing generality of migration vs.
excessive feature downgrade relative to released silicon.
This version of the patch replaces the prior hard wired
definitions with a configuration file approach for new
models. Existing models are thus far left as-is but may
easily be transitioned to (or may be overridden by) the
configuration file representation.
Proposed new model definitions are provided here for current
AMD and Intel processors. Each model consists of a name
used to select it on the command line (-cpu <name>), and a
model_id which corresponds to a least common denominator
commercial instance of the processor class.
A table of names/model_ids may be queried via "-cpu ?model":
:
x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron)
x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron)
x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron)
x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7)
x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2)
x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2)
:
Also added is "-cpu ?dump" which exhaustively outputs all config
data for all defined models, and "-cpu ?cpuid" which enumerates
all qemu recognized CPUID feature flags.
The pseudo cpuid flag 'check' when added to the feature flag list
will warn when feature flags (either implicit in a cpu model or
explicit on the command line) would have otherwise been quietly
unavailable to a guest:
# qemu-system-x86_64 ... -cpu Nehalem,check
warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000]
warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000]
A similar 'enforce' pseudo flag exists which in addition
to the above causes qemu to error exit if requested flags are
unavailable.
Configuration data for a cpu model resides in the target config
file which by default will be installed as:
/usr/local/etc/qemu/target-<arch>.conf
The format of this file should be self explanatory given the
definitions for the above six models and essentially mimics
the structure of the static x86_def_t x86_defs.
Encoding of cpuid flags names now allows aliases for both the
configuration file and the command line which reconciles some
Intel/AMD/Linux/Qemu naming differences.
This patch was tested relative to qemu.git.
Signed-off-by: john cooper <john.cooper@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
v1 -> v2 coding style changes
Add a tty close callback. Right now if a guest device that is connected
to a tty-based chardev in the host is removed, the tty is not closed.
With this patch it is closed.
Example use case is connecting an emulated USB serial cable in the guest
to ttyS0 of the host using the monitor command:
usb_add serial::/dev/ttyS0
and then removing the device with:
usb_del serial::/dev/ttyS0
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
o Implement receive overrun status. The FreeBSD uart driver
relies on this status in it's probe routine to determine the size
of the FIFO supported.
o As per the 16550 spec, do not overwrite the RX FIFO on an RX overrun.
o Do not allow TX or RX FIFO overruns to increment the data valid count
beyond the size of the FIFO.
o For reads of the IIR register, only clear the "TX holding register
emtpy interrupt" if the read reports this interrupt. This is required
by the specification and avoids losing TX interrupts when other,
higher priority interrupts (usually RX) are reported first.
Signed-off-by: Justin T. Gibbs <gibbs@FreeBSD.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: malc <av1474@comtv.ru>
|
|
Use rwhandler to simplify apb_pci.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
pci_data_write ignores high 8 bit in address,
so there seems to be no need to set them
in apb_pci.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
cc1: warnings being treated as errors
/src/qemu/hw/pl181.c: In function 'pl181_fifo_run':
/src/qemu/hw/pl181.c:185: error: 'value' may be used uninitialized in this function
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: malc <av1474@comtv.ru>
|
|
Signed-off-by: malc <av1474@comtv.ru>
|
|
The qemu_ld32s op is only defined if TCG_TARGET_REG_BITS == 64.
Signed-off-by: Jay Foad <jay.foad@gmail.com>
Signed-off-by: malc <av1474@comtv.ru>
|
|
The PL181 data transfer loop incorrectly terminates after the last FIFO
word is popped, discarding the last 3 bytes of data on a write transfer.
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
CRISv10 cores (unlike v32) do not take any interrupts while delayed
jumps are pending (delay slots).
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
brk insns while in user mode raise priv insn exceptions.
This commit makes gdbserver work on linux guests.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
|
|
Use 32-bit arithmetic for the address offset calculation to fix a
build failure on 32-bit hosts.
Signed-off-by: Jay Foad <jay.foad@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
On 32-bit hosts op_qemu_ld32s is unused. Remove it to fix the
following assertion failure:
qemu-alpha: tcg/tcg.c:1055:
tcg_add_target_add_op_defs: Assertion `tcg_op_defs[op].used' failed.
Signed-off-by: Jay Foad <jay.foad@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Previously ORC was always implemented by tcg-op.h with
an explicit NOT opcode. Allow a target implementation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Previously ANDC was always implemented by tcg-op.h with
an explicit NOT opcode. Allow a target implementation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
The fallback implementation of "ret = arg1 ^ -1" isn't ideal
because of the extra tcg op to load the minus one.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
The fallback implementation of "ret = 0 - arg1" isn't ideal,
first because of the extra tcg op to load the zero, and second
because we fail to handle zero as %g0 for arg1 of the sub.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
/src/qemu/hw/ide/core.c: In function 'ide_drive_pre_save':
/src/qemu/hw/ide/core.c:2740: warning: comparison is always false due to limited range of data type
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
/src/qemu/net.c: In function `net_check_clients':
/src/qemu/net.c:1287: warning: `has_nic' might be used uninitialized in this function
/src/qemu/net.c:1287: warning: `has_host_dev' might be used uninitialized in this function
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: malc <av1474@comtv.ru>
|
|
TCG_TARGET_CALL_{ALIGN_ARGS,STACK_OFFSET}.
New version after malc's comments. (This avoids having to do
#if defined __linux__ || defined __FreeBSD__ || defined __FreeBSD_kernel__
for the third case.)
Submitted by: Andreas Tobler <andreast@fgznet.ch> (original version)
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: malc <av1474@comtv.ru>
|
|
Submitted by: Andreas Tobler <andreast@fgznet.ch>
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: malc <av1474@comtv.ru>
|
|
New version after malc's comments. (Added error handling.)
Submitted by: Andreas Tobler <andreast@fgznet.ch>
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: malc <av1474@comtv.ru>
|
|
When qemu-img can't open the new backing file for a rebase, it prints an error
message which contains the file name of the old backing file. This is wrong,
obviously.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This fixes a possible read beyond the end of the temporary buffers used for
comparing data in the old and the new backing file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
If a write requests crosses a L2 table boundary and all clusters until the
end of the L2 table are usable for the request, we must not look at the next
L2 entry because we already have arrived at the end of the array.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
If the device can't be created, don't leak the QemuOpts and release the id of
the device that should have been added by the failed device_add.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Hi,
Kevin and I have agreed on the approach for this one now. So here is
the latest version of the patch for QEMU, submitting e820 reservation
entries via fw_cfg.
Cheers,
Jes
Use qemu-cfg to provide the BIOS with an optional table of e820 entries.
Notify the BIOS of the location of the TSS+EPT range to by reserving
it via the e820 table.
This matches a corresponding patch for Seabios, however older versions
of Seabios will default to the hardcoded address range and stay
compatible with current QEMU.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Save/restore information necessary to continue in progress PIO/ATAPI CMD
transfers.
This includes the IO buffer.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Michael noted we don't allow disabling of MSI for the virtio-serial-pci
device. Fix that.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Since commit 98b19252cf1bd97c54bc4613f3537c5ec0aae263, all
serial devices declare MULTIPORT feature.
To allow 0.12 compatibility, we should clear this when
max_nr_ports is 1.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
virtio-serial-pci can support multiple ports in the current development
version that will become 0.13. Add compatibility options for the 0.12
and 0.11 pc machine types.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The version 0.13 will be the new default and compatibility options will
be added to the 0.12 version.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
I found that the QEMU USB keyboard support does not work properly with
the Set_Idle command. Once a non-zero value is given to Set_Idle,
then the keyboard reports an event on every poll - not based on the
time issued in the Set_Idle command.
I changed the code (see patch below) and it works for me. I'm not
that familiar with the qemu internals, so I'm not sure if this is the
best way to implement this feature.
-Kevin
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Open backing file read-only where possible
Upgrade backing file to read-write during commit, back to read-only after commit
If upgrade fail, back to read-only. If also fail, "disconnect" the drive.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Starting with mingw32-runtime 3.15, C99/POSIX
format strings (%zu, %lld, ...) are supported
by defining __USE_MINGW_ANSI_STDIO=1.
As QEMU uses such format strings, unconditionally
define this macro. It won't hurt on older revisions
of mingw32-runtime.
Tested with manually installed mingw32-runtime 3.15
on debian (cross compiled + wine).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Arghh... Adding missing S-O-B
Hi Anthony. I wonder if there was a problem when importing my async
command handler patchset. Since the 'balloon' command completes
immediately, it must call the completion callback before returning.
That call was missing but is added by the patch below.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Handlers can generate only one error in a call, we let the
programmer know if they brake this rule and clients will only
get the first generated error.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
QObject Monitor handlers should not call any Monitor print
function: they should only build objects, printing is done
by common code.
Current QMP code will ignore such calls, as we can't send
garbage to clients, additionally it will also emit an
undefined error on the assumption that print calls usually
report errors.
However, the right way to deal with this is to rely on a
return code. This has been fixed by other commit already.
Now, this commit drops the error from monitor_vprintf() and
adds a better debugging mechanism for those 'stray' prints:
we count them if debug is enabled and let the developer know
if a QObject handler is trying to print anything.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This commit verifies the following two rules specified by
Markus Armbruster:
1. If the handler returns failure, it must have passed an error.
If it didn't, it's broken. Report an internal error to the client,
and report the bug to the programmer.
2. If the handler returns success, it must not have passed an error.
If it did, it's broken. Report the error to the client, and report
the bug to the programmer.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
