aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-02serial: Use enum device_endian in serial_mm_init parameterRichard Henderson
The use of DEVICE_NATIVE_ENDIAN cleans up lots of ifdefs in many of the callers. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-02serial: Convert serial_mm_init to MemoryRegionRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-02etrax-eth: Convert to MemoryRegionEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-02etrax-dma: Convert to MemoryRegionEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-02etrax-timer: Convert to MemoryRegionEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-02etrax-ser: Convert to MemoryRegionEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-02etrax-pic: Convert to MemoryRegionEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-01Move GETPC from dyngen-exec.h to exec-all.hBlue Swirl
GETPC() can be used even from outside of helper code. Move the macro to a more accessible location. Avoid a compile warning from redefining it in exec.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01softmmu_header: pass CPUState to tlb_fillBlue Swirl
Pass CPUState pointer to tlb_fill() instead of architecture local cpu_single_env hacks. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01Document softmmu templatesBlue Swirl
Add some comments to describe each file. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01ESP: convert to trace frameworkBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01PPC: Drop initial ESCC mappingAlexander Graf
We are mapping ESCC to a static (incorrect) address on machine init. This overlaps with our vram, rendering the screen barely usable. Since openBIOS is clever enough to map ESCC to where it needs to be, we can just drop that invalid map and everyone's happy. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01tcg-i386: Introduce limited deposit supportJan Kiszka
x86 cannot provide an optimized generic deposit implementation. But at least for a few special cases, namely for writing bits 0..7, 8..15, and 0..15, versions using only a single instruction are feasible. Introducing such limited support improves emulating 16-bit x86 code on x86, but also rarer cases where 32-bit or 64-bit code accesses bytes or words. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01mips_fulong2e: Reorder ISA bus and i8259 creationJan Kiszka
Missed during memory region conversion: The i8259 now depends on the ISA bus being created first. Reorder the initialization. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01target-i386: Remove redundant word mask in port out instructionsJan Kiszka
T0 was already masked to 16 bits when loading it. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01softfloat: Reinstate accidentally disabled target-specific NaN handlingPeter Maydell
Include config.h in softfloat.c, so that the target specific ifdefs in softfloat-specialize.h are evaluated correctly. This was accidentally broken in commit 789ec7ce2 when config-target.h was removed from softfloat.h, and means that most targets will have been returning the wrong results for calculations involving NaNs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01tcg/arm: Remove unused tcg_out_addi()Peter Maydell
Remove the unused function tcg_out_addi() from the ARM TCG backend; this fixes a compilation failure on ARM hosts with newer gcc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01configure: Detect predefined compiler symbols for ARM and HPPABrad
To be able to detect some ARM / HPPA based architectures such as with OpenBSD/(armish / zaurus) or OpenBSD/hppa. Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01tcg: Add some assertionsStefan Weil
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01tcg: Add forward declarations for local functionsStefan Weil
These functions are defined in the tcg target specific file tcg-target.c. The forward declarations assert that every tcg target uses the same function prototype. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01tcg: Don't declare TCG_TARGET_REG_BITS in tcg-target.hStefan Weil
It is now declared for all tcg targets in tcg.h, so the tcg target specific declarations are redundant. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01tcg: Declare TCG_TARGET_REG_BITS in tcg.hStefan Weil
TCG_TARGET_REG_BITS can be determined by the compiler, so there is no need to declare it for each individual tcg target. This is especially important for new tcg targets which will be supported by the tcg interpreter. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-29Merge remote-tracking branch 'kiszka/queues/slirp' into stagingAnthony Liguori
2011-09-29Merge remote-tracking branch 'aneesh/for-upstream-5' into stagingAnthony Liguori
2011-09-28Add OpenBIOS as a submoduleBlue Swirl
Update OpenBIOS images to r1047 built from submodule. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-28slirp: Fix packet expirationThomas Huth
The two new variables "arp_requested" and "expiration_date" in the mbuf structure have been added after the variable-sized "m_dat_" array. The variables have to be added before the m_dat_ array instead. Without this patch, the expiration_date gets clobbered by code that accesses the m_dat_ array. I experienced this problem with the code in slirp/tftp.c: The tftp_send_data() function created a new packet with the m_get() function (which fills-in a default expiration_date value). Then the TFTP code cleared the data section of the packet, which accidentially also cleared the expiration_date. This zeroed expiration_date then finally causes the packet to be discarded during if_start(), so that TFTP packets were not transmitted anymore. [Jan: added comment as suggested by Fabien ] CC: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-09-28slirp: Fix use after release on tcp_inputJan Kiszka
ti points into the m buffer. But the latter may already be released right after the dodata: label. Move the test before the potential release. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-09-27PPC: use memory API to construct the PCI holeBlue Swirl
Avoid vga.chain4 mapping by constructing a PCI hole for upper 2G of the PCI space. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-26Merge remote-tracking branch 'qemu-kvm-tmp/memory/urgent' into stagingAnthony Liguori
2011-09-26Merge remote-tracking branch 'qemu-kvm-tmp/memory/batch' into stagingAnthony Liguori
2011-09-26Merge remote-tracking branch 'qemu-kvm-tmp/memory/core' into stagingAnthony Liguori
2011-09-26Merge remote-tracking branch 'pmaydell/omap-for-upstream' into stagingAnthony Liguori
2011-09-26Merge remote-tracking branch 'riku/linux-user-for-upstream' into stagingAnthony Liguori
2011-09-25ppc_prep: fix pci config space initializationAvi Kivity
Use data_mem for the data mmio region, not conf_mem. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25fdc: Convert isabus_fdc_init1 to MemoryRegionRichard Henderson
This requires some amount of hoop-jumping, so that we don't inadvertently claim port 0x3f6, which is used by ISA IDE. The sysbus initialization path is as yet unconverted. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25serial: Convert serial_isa_initfn to MemoryRegionRichard Henderson
The serial_mm_init path is as yet unconverted. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25pckbd: Convert to MemoryRegionRichard Henderson
Slightly non-obvious with mips_jazz passing in the region structure to populate. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25i8259: Convert to MemoryRegionRichard Henderson
The only non-obvious part is pic_poll_read which used "addr1 >> 7" to detect whether one referred to either the master or slave PIC. Instead, test this directly. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25ppc_prep: initialize i8259 after the ISA busAvi Kivity
Succeeding i8259 conversion to ISA requires this. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25mips_r4k: initialize i8259 after the ISA busAvi Kivity
Succeeding i8259 conversion to ISA requires this. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25mips_jazz: initialize i8259 after the ISA busAvi Kivity
Succeeding i8259 conversion to ISA requires this. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25mips_malta: move i8259 initialization after piix4 initializationAvi Kivity
i8259 is an ISA device (or at least, depends on the ISA infrastructure to register its ioport); and the ISA bus is supplied by piix4. Later patches make this dependency explicit. Use qemu_irq_proxy() to stop the cycle by adding an extra layer of indirection. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25i8254: Convert to MemoryRegionRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25cs4231a: Convert to MemoryRegionRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25pc: Re-order pc_init1 to initialize the ISA bus before ISA devicesRichard Henderson
In particular, the i8259 was being initialized before the ISA bus, leading to a crash. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25isa: add isa_register_ioport()Richard Henderson
To replace isa_init_ioport and isa_init_ioport_range as the ISA devices are converted to the memory api. [avi: use memory_region_size()] Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25isa: Pass i/o address space to isa_bus_newRichard Henderson
Not used yet, but at least we're provided with the correct region. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25pci: add pci_address_space_io()Richard Henderson
Returns the I/O address space. Useful for implementing PCI-ISA bridge devices. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25memory: implement memory_region_set_readonly()Avi Kivity
The property is inheritable, but only if set to true. This is so that memory routers can mark sections of RAM as read-only via aliases. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-23MAINTAINERS: update maintainer for target-arm and ARM devboardsPeter Maydell
Add myself as co-maintainer alongside Paul Brook for the TCG ARM guest implementation (target-arm) and the ARM dev boards (integratorcp, realview, stellaris, versatilepb). Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Acked-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>