aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-04-26usb: add serial number generatorGerd Hoffmann
This patch adds a function which creates unique serial numbers for usb devices and puts it into use. Windows guests tend to become unhappy if they find two identical usb devices in the system. Effects range from non-functional devices (with yellow exclamation mark in device manager) to BSODs. Handing out unique serial numbers to devices fixes this. With this patch applied almost all emulated devices get a generated, unique serial number. There are two exceptions: * usb-storage devices will prefer a user-specified serial number and will only get a generated number in case the serial property is unset. * usb-hid devices keep the fixed serial number "42" as it is used to signal "remote wakeup actually works". See commit 7b074a22dab4bdda9864b933f1bc811a3db42845 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-26usb-redir: Not finding an async urb id is not an errorHans de Goede
We clear our pending async urb list on device disconnect and we may still receive "packet complete" packets from our peer after this, which will then refer to packet ids no longer in our list. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-26usb-redir: Reset device address and speed on disconnectHans de Goede
Without this disconnected devices look like the last redirected device in the monitor in "info usb". Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-26usb-redir: An interface count of 0 is a valid valueHans de Goede
An interface-count of 0 happens when a device is in unconfigured state when it gets redirected. So we should not use 0 to detect not having received interface info from our peer. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-26usb-xhci: fix bit testLai Jiangshan
use & instead of the wrong && Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-26usb-xhci: Use PCI DMA helper functionsDavid Gibson
Shortly before 1.0, we added helper functions / wrappers for doing PCI DMA from individual devices. This makes what's going on clearer and means that when we add IOMMU support somewhere in the future, only the general PCI code will have to change, not every device that uses PCI DMA. However, usb-xhci is not using these wrappers, despite being a PCI only device. This patch remedies the situation, using the pci dma functions instead of direct calls to cpu_physical_memory_{read,write}(). Likewise address parameters for DMA are changed to dma_addr_t instead of target_phys_addr_t. [ kraxel: removed #ifdefs ] Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-26usb-host: fix zero-length packetsGerd Hoffmann
usb-host optimizes away zero-length packets by not entering the processing loop at all. Which isn't correct, we should submit a zero-length urb to the host devicein that case. This patch makes sure we run the processing loop at least once. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-26usb-host: don't dereference invalid iovecsGerd Hoffmann
usb-host assumes the first iovec element is always valid. In case of a zero-length packet this isn't true though. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-26usb-storage: fix request cancelingGerd Hoffmann
Little fix for usb packet handling on i/o cancelation. The usb packet pointer (s->packet) is cleared at the wrong place: The scsi request cancel handler does it. When a usb packet is canceled the usb-storage emulation canceles the scsi request if present. In most cases there is one, so usually s->packet is cleared as needed even with the code sitting at the wrong place. If there is no scsi request in flight s->packet is not cleared though. The usb-storage emulation will then try to complete an usb packet which is not in flight any more and thereby trigger an assert() in the usb core. Fix this by clearing s->packet at the correct place, which is the usb packet cancel header. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-26usb-ehci: Ensure frindex writes leave a valid frindex valueHans de Goede
frindex is a 14 bits counter, so bits 31-14 should always be 0, and after the commit titled "usb-ehci: frindex always is a 14 bits counter" we rely on frindex always being a multiple of 8. I've not seen this in practice, but theoretically a guest can write a value >= 0x4000 or a value which is not a multiple of 8 value to frindex, this patch ensures that things will still work when that happens. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-26usb-ehci: add missing usb_packet_init() callGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-26usb-ehci: remove hackGerd Hoffmann
To answer the question in the comment removed by this patch: I think this was needed because several places in the ehci emulation did not check the T bit of link entries correctly and thus might have followed invalid references. See commit 2a5ff735dc1074171a0cbb1dc228d6d6e907f571 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-26hda: fix codec idsGerd Hoffmann
Our hda codecs exist in two variants: With CONFIG_MIXEMU=y they expose amplifiers for volume control to the guest, with CONFIG_MIXEMU=n they don't. This patch changes the codec ids, they are different now for these two cases. This makes sure windows guests will notice the difference. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2012-04-26hda: add hda-micro codecGerd Hoffmann
It's identical to the hda-duplex codec, except that it advertises the input as microphone instead of line-in and the output as speaker instead of line-out. Some guest apps (microsoft netmeeting being one) are picky when it comes to selecting the recording source and don't accept line-in, so give them what they expect. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2012-04-26hda: move input widgets from duplex to commonGerd Hoffmann
Preparing for a new user of the input widget definitions. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2012-04-25fix paaudio.c warningsGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2012-04-24Limit ptimer rate to something achievablePeter Chubb
If a guest sets very short timeouts, and asks for a timer to be reloaded on timeout, QEMU can go to 100%CPU utilisation and become unresponsive, as it is spending all its time generating timeout interrupts. On real hardware this doesn't matter, as the interrupts are just coalesced, and the effect is to have the interrupt asserted all the time. This patch is a band-aid, that prevents timeouts less than 10 microseconds from being set. 10 microseconds is a limit that was determined empirically on a variety of machines as the shortest that allowed QEMU to pick up a control-a c sequence to get at the monitor. Reported-by: Anna Lyons <anna.lyons@nicta.com.au> Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24qom: Refine container_get() to allow using a custom rootAndreas Färber
Specify the root to search from as argument. This avoids hardcoding "/machine" in some places and makes it more flexible. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24qtest: Fix tv_usec != longRichard Henderson
Sparc Debian 5.0.8 does not define __suseconds_t as long, but FMT_timeval expects %ld. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24Remove extra pthread switchPeter Portante
remove the extra pthread switch which might be there from the package config check for gthreads. Signed-off-by: Peter Portante <peter.portante@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24configure: Virtfs doesn't require libcap.Kusanagi Kouichi
Only proxy helper does. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24qemu-char: Fix crash when switching consolesStefan Weil
qemu-system-arm (and other system emulations) crashes with SDL when the user switches consoles (Alt-Ctrl-F4). We already check for NULL pointers in qemu_chr_fe_ioctl, qemu_chr_be_can_write and other functions, so do this also for s->chr_read in qemu_chr_be_write. This fixes the crash. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24configure: add --with-confsuffix optionEduardo Habkost
This will allow the user to make Qemu use a different subdirectory name inside $datadir and $sysconfdir, instead of "/qemu". Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24configure: change meaning of --datadir to Autoconf conventionEduardo Habkost
Autoconf uses --datadir for the /usr/share directory, not the program-specific subdirectory inside /usr/share. This changes configure to match autoconf behavior. Note that this will break compatibility with existing build scripts. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24create_config: simplify prefix=* block, remove CONFIG_QEMU_PREFIXEduardo Habkost
As now that block handles only the prefix variable, the code can be much simpler. This also removes the CONFIG_QEMU_PREFIX define as it is not used by any C code. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24create_config: remove *dir blockEduardo Habkost
Now only the qemu_*dir variables will become #defines. The other directory names aren't used by the C code. That means the following #defines won't be available in C code anymore: - CONFIG_QEMU_BINDIR - CONFIG_QEMU_LIBDIR - CONFIG_QEMU_INCLUDEDIR - CONFIG_QEMU_MANDIR - CONFIG_QEMU_SYSCONFDIR - CONFIG_QEMU_LIBEXECDIR The following #defines are going to be kept because they are handled by the qemu_* block on create_config: - CONFIG_QEMU_CONFDIR - CONFIG_QEMU_DATADIR - CONFIG_QEMU_DOCDIR This one will be kept because it is set directly by ./configure: - CONFIG_QEMU_HELPERDIR This patch keeps the 'prefix=*' (CONFIG_QEMU_PREFIX) pattern because other variables may use $prefix on their config-host.mak definitions. The remaining code will be simplified on a further patch. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24config-host.mak: reorder variables a bitEduardo Habkost
Cosmetic change. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24config-host.mak: remove CONFIG_QEMU_SHAREDIREduardo Habkost
There is no code using that variable according to 'git grep', so kill it. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24config-host.mak: rename docdir to qemu_docdirEduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24Makefile: use $(qemu_confdir) instead of $(sysconfdir)/qemuEduardo Habkost
Instead of hardcoding the directory suffix, use the qemu-specific directory variable. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24config-host.mak: rename confdir to qemu_confdirEduardo Habkost
$confdir is a confusing name, as it's not clear if it's "the system config dir" or "the Qemus-specific directory inside the config dir". $qemu_confdir makes it more clear. The current C code that uses CONFIG_QEMU_CONFDIR should be safe, as now create_config generates the same #define name (CONFIG_QEMU_CONFDIR) for both "confdir" and "qemu_confdir" variables. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24config-host.mak: rename datadir to qemu_datadirEduardo Habkost
Autoconf concept of "datadir" is supposed to be "$prefix/share", not "$prefix/share/PACKAGE", so using datadir for the Qemu-specific directory is confusing. The current C code that uses CONFIG_QEMU_DATADIR should be safe, as now create_config generates the same #define name (CONFIG_QEMU_DATADIR) for both "datadir" and "qemu_datadir" variables. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24create_config: separate section for qemu_*dir variables (v2)Eduardo Habkost
The generic *dir section will eventually go away and be replaced with qemu_* section. By now, both sections will be kept, while the variables get renamed on config-host.mak. With this patch, a XXXdir variable will become a CONFIG_QEMU_XXXDIR define, and a qemu_XXXdir variable will become CONFIG_QEMU_XXXDIR as well (instead of becoming a CONFIG_QEMU_QEMU_XXXDIR define). Changes v1 -> v2: - Rebase on top of newer qemu.git changes, that changed "tr '[:lower:]' '[:upper:]'" to "LC_ALL=C tr '[a-z]' '[A-Z]'". Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24configure: rename $confdir to $qemu_confdirEduardo Habkost
There's no "confdir" variable on Autoconf, but it's good to make it clear that it's a variable for the Qemu-specific subdirectory inside $sysconfdir. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24configure: rename $docdir to $qemu_docdirEduardo Habkost
The autoconf "docdir" variable is used for the program-specific subdirectory, but anyway it's better to make it clear that the variable is used for the qemu-specific subdirectory path. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24configure: rename $datadir to $qemu_datadirEduardo Habkost
The variable is used for the qemu-specific directory and has a different meaning of the autoconf "datadir" variable (that's used for the $prefix/share directory, not for $prefix/share/PACKAGE). This doesn't change behavior or interfaces, it's just an internal variable rename. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24target-microblaze: QOM'ify CPU initAndreas Färber
Move code from cpu_mb_init() to a QOM initfn. Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com> [AF: Leave cpu_reset() call in cpu_mb_init()]
2012-04-24target-microblaze: QOM'ify CPU resetAndreas Färber
Move code from cpu_state_reset() to QOM mb_cpu_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
2012-04-24target-microblaze: QOM'ify CPUAndreas Färber
Embed CPUMBState as first member of QOM MicroBlazeCPU. Let CPUClass::reset() call cpu_state_reset() for now. Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com> [AF: Updated cpu.c to include cpu-qom.h indirectly via cpu.h]
2012-04-24target-cris: Start QOM'ifying CPU initAndreas Färber
Move VR-independent code from cpu_cris_init() into an initfn. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-24target-cris: QOM'ify CPU resetAndreas Färber
Move code from cpu_state_reset() into QOM cris_cpu_reset(). Let CPU init call cpu_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-24target-cris: QOM'ify CPUAndreas Färber
Embed CPUCRISState as first member of QOM CRISCPU. Let CPUClass::reset() call cpu_state_reset() for now. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-23Merge remote-tracking branch 'origin/master' into stagingAnthony Liguori
* origin/master: qtest: fix memread and memwrite on 32 bit hosts
2012-04-23Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori
* qmp/queue/qmp: qapi: g_hash_table_find() instead of GHashTableIter. qmp: make block job command naming consistent
2012-04-23qtest: fix memread and memwrite on 32 bit hostsBlue Swirl
Use PRIx64 to print 64 bit values to avoid truncation on 32 bit hosts. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-23Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
* kwolf/for-anthony: (38 commits) qemu-iotests: Fix test 031 for qcow2 v3 support qemu-iotests: Add -o and make v3 the default for qcow2 qcow2: Zero write support qemu-iotests: Test backing file COW with zero clusters qemu-iotests: add a simple test for write_zeroes qcow2: Support for feature table header extension qcow2: Support reading zero clusters qcow2: Version 3 images qcow2: Ignore reserved bits in check_refcounts qcow2: Ignore reserved bits in refcount table entries qcow2: Simplify count_cow_clusters qcow2: Refactor qcow2_free_any_clusters qcow2: Ignore reserved bits in L1/L2 entries qcow2: Fail write_compressed when overwriting data qcow2: Ignore reserved bits in count_contiguous_clusters() qcow2: Ignore reserved bits in get_cluster_offset qcow2: Save disk size in snapshot header Specification for qcow2 version 3 qcow2: Fix refcount block allocation during qcow2_alloc_cluster_at() iotests: Resolve test failures caused by hostname ...
2012-04-23Merge remote-tracking branch 'origin/master' into stagingAnthony Liguori
* origin/master: fix BCD mask for date (Solaris 2.5 guest hang fix)
2012-04-23fix BCD mask for date (Solaris 2.5 guest hang fix)Artyom Tarasenko
Fix BCD mask for date. The most visible effect of this patch is Solaris 2.5.1 doesn't hang at boot if the day of month is >21. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-23Merge remote-tracking branch 'origin/master' into stagingAnthony Liguori
* origin/master: (27 commits) target-arm: Move reset handling to arm_cpu_reset target-arm: Drop cpu_reset_model_id() target-arm: Move cache ID register setup to cpu specific init fns target-arm: Move OMAP cp15_i_{max,min} reset to cpu_state_reset target-arm: Move feature register setup to per-CPU init fns target-arm: Move iWMMXT wCID reset to cpu_state_reset target-arm: Drop JTAG_ID documentation target-arm: Move SCTLR reset value setup to per cpu init fns target-arm: Move CTR setup to per cpu init fns target-arm: Move MVFR* setup to per cpu init fns target-arm: Move FPSID config to cpu init fns target-arm: Move feature bit settings to CPU init fns target-arm: Add QOM subclasses for each ARM cpu implementation target-arm: remind to keep arm features in sync with linux-user/elfload.c tci: GETPC() macro must return an uintptr_t gdbstub: Synchronize CPU state unconditionally in gdb_set_cpu_pc softfloat: make USE_SOFTFLOAT_STRUCT_TYPES compile target-xtensa: add tests for LOOPNEZ and LOOPGTZ target-xtensa: fix LOOPNEZ/LOOPGTZ translation qtest: add m48t59 tests for Sparc ...
2012-04-23qapi: g_hash_table_find() instead of GHashTableIter.NODA, Kai
GHashTableIter was first introduced in glib 2.16. This patch removes it in favor of older g_hash_table_find() for better compatibility with RHEL5. Signed-off-by: NODA, Kai <nodakai@gmail.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 09:37:18 +0000