aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-23qapi: fix error propagationPaolo Bonzini
Don't overwrite / leak previously set errors. Make traversal cope with missing mandatory sub-structs. Don't try to end a container that could not be started. v1->v2: - unchanged v2->v3: - instead of examining, assert that we never overwrite errors with error_set() - allow visitors to set a NULL struct pointer successfully, so traversal of incomplete objects can continue - check for a NULL "obj" before accessing "(*obj)->has_XXX" (this is not a typo, "obj != NULL" implies "*obj != NULL" here) - fix start_struct / end_struct balance for unions as well Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-23MAINTAINERS: Replace net maintainer Mark McLoughlin with Stefan HajnocziStefan Hajnoczi
The net subsystem has lacked an active maintainer since 2009. I have built and tested a net-next tree to get the ball rolling again. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-19Revert "audio: Make PC speaker audio card available by default"Anthony Liguori
This reverts commit 504972922da9b562f15e13544d3efca84b46b8fd which broke the build for ARM. I don't think this change is necessary. If I'm wrong, please recommit this changeset with an appropriate fix for ARM. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-19audio: Make PC speaker audio card available by defaultJan Kiszka
[ The following text is in the "ISO-8859-1" character set. ] [ Your display is set for the "KOI8-R" character set. ] [ Some special characters may be displayed incorrectly. ] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: malc <av1474@comtv.ru>
2012-07-18Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
* kwolf/for-anthony: (41 commits) fdc-test: Clean up a bit fdc-test: introduce test_relative_seek fdc: fix relative seek qemu-iotests: Valgrind support coroutine-ucontext: Help valgrind understand coroutines qemu-io: Fix memory leaks hw/block-common: Factor out fall back to legacy -drive cyls=... blockdev: Don't limit DriveInfo serial to 20 characters hw/block-common: Factor out fall back to legacy -drive serial=... hw/block-common: Move BlockConf & friends from block.h Relax IDE CHS limits from 16383,16,63 to 65535,16,255 blockdev: Drop redundant CHS validation for if=ide hd-geometry: Compute BIOS CHS translation in one place qtest: Test we don't put hard disk info into CMOS for a CD-ROM ide pc: Put hard disk info into CMOS only for hard disks block: Geometry and translation hints are now useless, purge them qtest: Cover qdev property for BIOS CHS translation ide: qdev property for BIOS CHS translation qdev: New property type chs-translation qdev: Collect private helpers in one place ...
2012-07-18Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori
* qemu-kvm/uq/master: virtio: move common irqfd handling out of virtio-pci virtio: move common ioeventfd handling out of virtio-pci event_notifier: add event_notifier_set_handler memory: pass EventNotifier, not eventfd ivshmem: wrap ivshmem_del_eventfd loops with transaction ivshmem: use EventNotifier and memory API event_notifier: add event_notifier_init_fd event_notifier: remove event_notifier_test event_notifier: add event_notifier_set apic: Defer interrupt updates to VCPU thread apic: Reevaluate pending interrupts on LVT_LINT0 changes apic: Resolve potential endless loop around apic_update_irq kvm: expose tsc deadline timer feature to guest kvm_pv_eoi: add flag support kvm: Don't abort on kvm_irqchip_add_msi_route()
2012-07-18Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori
* qmp/queue/qmp: qapi: Convert getfd and closefd qapi: input_type_enum(): fix error message qmp: dump-guest-memory: improve schema doc
2012-07-18Merge remote-tracking branch 'kraxel/bios.2' into stagingAnthony Liguori
* kraxel/bios.2: Add vgabios build rules to roms/Makefile
2012-07-18Merge remote-tracking branch 'kraxel/usb.57' into stagingAnthony Liguori
* kraxel/usb.57: ehci: improve expire time calculation ehci: implement Interrupt Threshold Control support ehci: raise irq in the frame timer uhci: initialize expire_time when loading v1 vmstate usb: add usb attached scsi emulation scsi: add free_request callback
2012-07-17build: fix build breakage due to bad mergeAnthony Liguori
34bb443ee74df3780d86044dbf6492eb798c5807 broke the build but in a subtle way. The patch on the ML was actually based on the 1.1.1 stable branch (accidentally). When I merged it from the ML, the fuzzing got resolved in a such a way that the newly introduced Makefile dependency on GENERATED_HEADERS got lost (that was not in 1.1.1). The dist bits also got duplicated (but this is just cosmetic). Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-17build: add make dist target (v2)Anthony Liguori
Let's stop screwing up releases by having a script do the work that Anthony's fat fingers can't seem to get right. Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-17qemu-options.hx: Fix set_password and expire_password descriptionMichal Novotny
The description for set_password and expire_password commands is incomplete. This patch fixes the man page that is being generated to match the real behaviour of these functions. Signed-off-by: Michal Novotny <minovotn@redhat.com> Signed-off-by: Michal Novotny <minovotn@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-17qemu-options.hx: Improve -nodefaults descriptionMichal Novotny
This patch improves the description of -nodefaults QEMU command line option by adding more information what is being disabled using this command. Signed-off-by: Michal Novotny <minovotn@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-17qemu-options.hx: Improve -{read|write}config options descriptionMichal Novotny
This is the patch to improve description for -{read|write}config functions. Signed-off-by: Michal Novotny <minovotn@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-17constify value pointer for qdev_prop_set_stringChristian Borntraeger
qdev_prop_set_string uses object_property_set_str, which takes a const char * for the value. Lets propagate the constness into qdev_prop_set_string. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-17doc: Fix indefinite article an -> a before nouns that begin with 'h'Stefan Weil
Although the rule also allows 'an' for historical reasons, 'a' is more common because 'h' is pronounced. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-17fdc-test: Clean up a bitKevin Wolf
Readability of the test code has suffered as the test case evolved. This should improve it a bit again. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17fdc-test: introduce test_relative_seekPavel Hrdina
Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17fdc: fix relative seekPavel Hrdina
Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17qemu-iotests: Valgrind supportKevin Wolf
check -valgrind wraps all qemu-io calls with valgrind. This makes it a bit easier to debug problems that occur somewhere deep in a test case. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-17coroutine-ucontext: Help valgrind understand coroutinesKevin Wolf
valgrind tends to get confused and report false positives when you switch stacks and don't tell it about it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-17qemu-io: Fix memory leaksKevin Wolf
Almost all callers of create_iovec() forgot to destroy the qiov when the request has completed. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17hw/block-common: Factor out fall back to legacy -drive cyls=...Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17blockdev: Don't limit DriveInfo serial to 20 charactersMarkus Armbruster
All current users (IDE, SCSI and virtio-blk) happen to share this 20 characters limit. Still, it should be left to device models. They already enforce their limits. They have to, as the DriveInfo limit only affects legacy -drive serial=..., not the qdev properties. usb-storage, which doesn't limit serial number length, also uses DriveInfo for -usbdevice. But that doesn't provide access to DriveInfo serial. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17hw/block-common: Factor out fall back to legacy -drive serial=...Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17hw/block-common: Move BlockConf & friends from block.hMarkus Armbruster
This stuff doesn't belong to block layer, and was put there only because a better home didn't exist then. Now it does. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17Relax IDE CHS limits from 16383,16,63 to 65535,16,255Markus Armbruster
New limits straight from ATA4 6.2 Register delivered data transfer command sector addressing. I figure the old sector limit 63 was blindly copied from the BIOS int 13 limit. Doesn't apply to the hardware. No idea where the old cylinder limit comes from. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17blockdev: Drop redundant CHS validation for if=ideMarkus Armbruster
Leave it to ide_init_drive(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17hd-geometry: Compute BIOS CHS translation in one placeMarkus Armbruster
Currently, it is split between hd_geometry_guess() and pc_cmos_init_late(). Confusing. info qtree shows the result of the former. Also confusing. Fold the part done in pc_cmos_init_late() into hd_geometry_guess(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17qtest: Test we don't put hard disk info into CMOS for a CD-ROMMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17ide pc: Put hard disk info into CMOS only for hard disksMarkus Armbruster
In particular, don't set disk type and geometry when a CD-ROM on bus ide.0 has media during CMOS initialization. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17block: Geometry and translation hints are now useless, purge themMarkus Armbruster
There are two producers of these hints: drive_init() on behalf of -drive, and hd_geometry_guess(). The only consumer of the hint is hd_geometry_guess(). The callers of hd_geometry_guess() call it only when drive_init() didn't set the hints. Therefore, drive_init()'s hints are never used. Thus, hd_geometry_guess() only ever sees hints it produced itself in a prior call. Only the first call computes something, subsequent calls just repeat the first call's results. However, hd_geometry_guess() is never called more than once: the device models don't, and the block device is destroyed on unplug. Thus, dropping the repeat feature doesn't break anything now. If a block device wasn't destroyed on unplug and could be reused with a new device, then repeating old results would be wrong. Thus, dropping the repeat feature prevents future breakage. This renders the hints unused. Purge them from the block layer. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17qtest: Cover qdev property for BIOS CHS translationMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17ide: qdev property for BIOS CHS translationMarkus Armbruster
This isn't quite orthodox. CHS translation is firmware configuration, communicated via the RTC's CMOS RAM, not a property of the disk. But it's best to treat it just like geometry anyway. Maintain backward compatibility exactly like for geometry: fall back to DriveInfo's translation, set with -drive trans=... Bonus: info qtree now shows the translation. Except when it shows "auto": that's resolved by pc_cmos_init_late(). To be addressed shortly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17qdev: New property type chs-translationMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17qdev: Collect private helpers in one placeMarkus Armbruster
Just code motion, with one long line wrapped to keep checkpatch.pl happy. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17qtest: Cover qdev properties for disk geometryMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17ide: qdev properties for disk geometryMarkus Armbruster
Geometry needs to be qdev properties, because it belongs to the disk's guest part. Maintain backward compatibility exactly like for serial: fall back to DriveInfo's geometry, set with -drive cyls=... Do this only for ide-hd. ide-drive is legacy. ide-cd doesn't have a geometry. Bonus: info qtree now shows the geometry. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17virtio-blk: qdev properties for disk geometryMarkus Armbruster
Geometry needs to be qdev properties, because it belongs to the disk's guest part. Maintain backward compatibility exactly like for serial: fall back to DriveInfo's geometry, set with -drive cyls=... Bonus: info qtree now shows the geometry. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17scsi-hd: qdev properties for disk geometryMarkus Armbruster
Geometry needs to be qdev properties, because it belongs to the disk's guest part. Maintain backward compatibility exactly like for serial: fall back to DriveInfo's geometry, set with -drive cyls=... Do this only for scsi-hd. scsi-disk is legacy. scsi-cd doesn't have a geometry. scsi-block should get geometry from the host disk. Bonus: info qtree now shows the geometry. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17hd-geometry: Switch to uint32_t to match BlockConfMarkus Armbruster
Best to use the same type, to avoid unwanted truncation or sign extension. BlockConf can't use plain int for cyls, heads and secs, because integer properties require an exact width. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17qdev: Introduce block geometry propertiesMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17blockdev: Save geometry in DriveInfoMarkus Armbruster
In preparation of purging it from the block layer, which will happen later in this series. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17ide pc: Cut out the block layer geometry middlemanMarkus Armbruster
PC BIOS setup needs IDE geometry information. Get it directly from the device model rather than through the block layer. In preparation of purging geometry from the block layer, which will happen later in this series. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17hd-geometry: Cut out block layer translation middlemanMarkus Armbruster
hd_geometry_guess() picks geometry and translation. Callers can get the geometry directly, via parameters, but for translation they need to go through the block layer. Add a parameter for translation, so it can optionally be gotten just like geometry. In preparation of purging translation from the block layer, which will happen later in this series. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17hd-geometry: Clean up confusing use of prior translation hintMarkus Armbruster
When hd_geometry_guess() picks a geometry, it also picks the appropriate translation, but only when the prior translation hint is BIOS_ATA_TRANSLATION_AUTO. Looks wrong, because such a prior translation would be passed to the BIOS whether it's suitable for the geometry or not. Fortunately, that can't happen. There are just two ways for the translation hint to get set to something other than BIOS_ATA_TRANSLATION_AUTO: drive_init() on behalf of -drive trans=..., and hd_geometry_guess(). Both set it only when they also set a valid geometry hint, i.e. one with a non-zero number of cylinders. Since hd_geometry_guess() returns right away when it finds a valid geometry hint, translation can only be BIOS_ATA_TRANSLATION_AUTO in the remainder of the function. Assert this, and simplify accordingly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17hd-geometry: Clean up gratuitous goto in hd_geometry_guess()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17hd-geometry: Factor out guess_chs_for_size()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17hd-geometry: Unnest conditional in hd_geometry_guess()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17hd-geometry: Add tracepointsMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>