aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-31cputlb: Remove tlb_c.pending_flushesRichard Henderson
This is essentially redundant with tlb_c.dirty. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Filter flushes on already clean tlbsRichard Henderson
Especially for guests with large numbers of tlbs, like ARM or PPC, we may well not use all of them in between flush operations. Remember which tlbs have been used since the last flush, and avoid any useless flushing. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Count "partial" and "elided" tlb flushesRichard Henderson
Our only statistic so far was "full" tlb flushes, where all mmu_idx are flushed at the same time. Now count "partial" tlb flushes where sets of mmu_idx are flushed, but the set is not maximal. Account one per mmu_idx flushed, as that is the unit of work performed. We don't actually count elided flushes yet, but go ahead and change the interface presented to the monitor all at once. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Merge tlb_flush_page into tlb_flush_page_by_mmuidxRichard Henderson
The difference between the two sets of APIs is now miniscule. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Merge tlb_flush_nocheck into tlb_flush_by_mmuidx_async_workRichard Henderson
The difference between the two sets of APIs is now miniscule. This allows tlb_flush, tlb_flush_all_cpus, and tlb_flush_all_cpus_synced to be merged with their corresponding by_mmuidx functions as well. For accounting, consider mmu_idx_bitmask = ALL_MMUIDX_BITS to be a full flush. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Move env->vtlb_index to env->tlb_d.vindexRichard Henderson
The rest of the tlb victim cache is per-tlb, the next use index should be as well. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Split large page tracking per mmu_idxRichard Henderson
The set of large pages in the kernel is probably not the same as the set of large pages in the application. Forcing one range to cover both will flush more often than necessary. This allows tlb_flush_page_async_work to flush just the one mmu_idx implicated, which in turn allows us to remove tlb_check_page_and_flush_by_mmuidx_async_work. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Move cpu->pending_tlb_flush to env->tlb_c.pending_flushRichard Henderson
Protect it with the tlb_lock instead of using atomics. The move puts it in or near the same cacheline as the lock; using the lock means we don't need a second atomic operation in order to perform the update. Which makes it cheap to also update pending_flush in tlb_flush_by_mmuidx_async_work. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Remove tcg_enabled hack from tlb_flush_nocheckRichard Henderson
The bugs this was working around were fixed with commits 022d6378c7fd target/unicore32: remove tlb_flush from uc32_init_fn 6e11beecfde0 target/alpha: remove tlb_flush from alpha_cpu_initfn Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31cputlb: Move tlb_lock to CPUTLBCommonRichard Henderson
This is the first of several moves to reduce the size of the CPU_COMMON_TLB macro and improve some locality of refernce. Tested-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31scripts: report on author emails that are mangled by the mailing listDaniel P. Berrangé
In some cases the Author: email address in patches submitted to the list gets mangled such that it says John Doe via Qemu-devel <qemu-devel@nongnu.org> This change is a result of workarounds for DMARC policies. Subsystem maintainers accepting patches need to catch these and fix them before sending pull requests, so a checkpatch.pl test is highly desirable. Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-10-31block: drop moderated sheepdog mailing list from MAINTAINERS fileDaniel P. Berrangé
The sheepdog mailing list is setup to stop and queue messages from non-subscribers, pending moderator approval. Unfortunately it seems that the moderation queue is not actively deadlt with. Even when messages are approved, the sender is never added to the whitelist, so every future mail the same sender continues to get stopped for moderation. MAINTAINERS entries should be responsive and not uneccessarily block mails from QEMU contributors, so drop the sheepdog mailing list. Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-10-31migration: avoid segmentfault when take a snapshot of a VM which being migratedJia Lina
During an active background migration, snapshot will trigger a segmentfault. As snapshot clears the "current_migration" struct and updates "to_dst_file" before it finds out that there is a migration task, Migration accesses the null pointer in "current_migration" struct and qemu crashes eventually. Signed-off-by: Jia Lina <jialina01@baidu.com> Signed-off-by: Chai Wen <chaiwen@baidu.com> Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Message-Id: <20181026083620.10172-1-jialina01@baidu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-10-31qapi: Fix COLOStatus and query-colo-status since versionZhang Chen
This structure and command have missed qemu version 3.0, so fix it to since version 3.1. Signed-off-by: Zhang Chen <zhangckid@gmail.com> Message-Id: <20181022164118.5502-1-zhangckid@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-10-31COLO: Fix Colo doc secondeary should be secondarywangguang
Signed-off-by: Guang Wang <wang.guang55@zte.com.cn> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-10-30i386: Add PKU on Skylake-Server CPU modelTao Xu
As the release document ref below link (page 13): https://software.intel.com/sites/default/files/managed/c5/15/\ architecture-instruction-set-extensions-programming-reference.pdf PKU is supported in Skylake Server (Only Server) and later, and on Intel(R) Xeon(R) Processor Scalable Family. So PKU is supposed to be in Skylake-Server CPU model. And PKU's CPUID has been exposed to QEMU. But PKU can't be find in Skylake-Server CPU model in the code. So this patch will fix this issue in Skylake-Server CPU model. Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <5014b57f834dcfa8fd3781504d98dcf063d54fde.1540801392.git.tao3.xu@intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30i386: Add new model of Cascadelake-ServerTao Xu
New CPU models mostly inherit features from ancestor Skylake-Server, while addin new features: AVX512_VNNI, Intel PT. SSBD support for speculative execution side channel mitigations. Note: On Cascadelake, some capabilities (RDCL_NO, IBRS_ALL, RSBA, SKIP_L1DFL_VMENTRY and SSB_NO) are enumerated by MSR. These features rely on MSR based feature support patch. Will be added later after that patch's in. http://lists.nongnu.org/archive/html/qemu-devel/2018-09/msg00074.html Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20180919031122.28487-2-tao3.xu@intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30x86: define a new MSR based feature word -- FEATURE_WORDS_ARCH_CAPABILITIESRobert Hoo
Note RSBA is specially treated -- no matter host support it or not, qemu pretends it is supported. Signed-off-by: Robert Hoo <robert.hu@linux.intel.com> Message-Id: <1539578845-37944-4-git-send-email-robert.hu@linux.intel.com> [ehabkost: removed automatic enabling of RSBA] Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30x86: Data structure changes to support MSR based featuresRobert Hoo
Add FeatureWordType indicator in struct FeatureWordInfo. Change feature_word_info[] accordingly. Change existing functions that refer to feature_word_info[] accordingly. Signed-off-by: Robert Hoo <robert.hu@linux.intel.com> Message-Id: <1539578845-37944-3-git-send-email-robert.hu@linux.intel.com> [ehabkost: fixed hvf_enabled() case] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30kvm: Add support to KVM_GET_MSR_FEATURE_INDEX_LIST and KVM_GET_MSRS system ioctlRobert Hoo
Add kvm_get_supported_feature_msrs() to get supported MSR feature index list. Add kvm_arch_get_supported_msr_feature() to get each MSR features value. Signed-off-by: Robert Hoo <robert.hu@linux.intel.com> Message-Id: <1539578845-37944-2-git-send-email-robert.hu@linux.intel.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30target/i386: Remove #ifdeffed-out icebp debugging hackPeter Maydell
Remove a debugging hack which could be used to cause the undocumented 'icebp' instruction to enable QEMU internal debug logging. This code has always been #ifdeffed out since it was introduced in commit aba9d61e34b9 in 2005; judging by the rest of that commit (which is entirely unrelated) it may have even been committed by accident. (Note that WANT_ICEBP is not defined by default anyway.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20181009183314.13416-1-peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30i386: correct cpu_x86_cpuid(0xd)Sebastian Andrzej Siewior
Intel SDM says for CPUID function 0DH, sub-function 0: | • ECX enumerates the size (in bytes) required by the XSAVE instruction for an | XSAVE area containing all the user state components supported by this | processor. | • EBX enumerates the size (in bytes) required by the XSAVE instruction for an | XSAVE area containing all the user state components corresponding to bits | currently set in XCR0. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Message-Id: <20180928104319.3296-1-bigeasy@linutronix.de> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30scripts/qemu.py: use a more consistent docstring styleCleber Rosa
Signed-off-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20181004161852.11673-10-crosa@redhat.com> [ehabkost: reverted unintentional submodule update] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30scripts/decodetree.py: fix reference to attributesCleber Rosa
Signed-off-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20181004161852.11673-9-crosa@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30Travis support for the acceptance testsCleber Rosa
This enables the execution of the acceptance tests on Travis. Because the Travis environment is based on Ubuntu Trusty, it requires the python3-pip and python3.4-venv packages. Signed-off-by: Cleber Rosa <crosa@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Caio Carrara <ccarrara@redhat.com> Message-Id: <20181018153134.8493-4-crosa@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30Acceptance tests: add make rule for running themCleber Rosa
The acceptance (aka functional, aka Avocado-based) tests are Python files located in "tests/acceptance" that need to be run with the Avocado libs and test runner. Let's provide a convenient way for QEMU developers to run them, by making use of the tests-venv with the required setup. Also, while the Avocado test runner will take care of creating a location to save test results to, it was understood that it's better if the results are kept within the build tree. Signed-off-by: Cleber Rosa <crosa@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Caio Carrara <ccarrara@redhat.com> Message-Id: <20181018153134.8493-3-crosa@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30Bootstrap Python venv for testsCleber Rosa
A number of QEMU tests are written in Python, and may benefit from an untainted Python venv. By using make rules, tests that depend on specific Python libs can set that rule as a requirement, along with rules that require the presence or installation of specific libraries. The tests/requirements.txt is supposed to contain the Python requirements that should be added to the venv created by check-venv. Signed-off-by: Cleber Rosa <crosa@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Caio Carrara <ccarrara@redhat.com> Message-Id: <20181018153134.8493-2-crosa@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30iotests: Unify log outputs between Python 2 and 3Max Reitz
When dumping an object into the log, there are differences between Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2 (they are no longer in 3, because unicode strings are the default there). Second, the order of keys in dicts may differ. Third, especially long numbers are longs in Python 2 and thus get an 'L' suffix, which does not happen in Python 3. We can get around all of these differences by dumping objects (lists and dicts) in a language-independent format, namely JSON. The JSON generator even allows emitting dicts with their keys sorted alphabetically. This changes the output of all tests that use these logging functions (dict keys are ordered now, strings in dicts are now enclosed in double quotes instead of single quotes, the 'L' suffix of large integers is dropped, and "true" and "false" are now in lower case). The quote change necessitates a small change to a filter used in test 207. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20181022135307.14398-10-mreitz@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30iotests: Modify imports for Python 3Max Reitz
There are two imports that need to be modified when running the iotests under Python 3: One is StringIO, which no longer exists; instead, the StringIO class comes from the io module, so import it from there (and use the BytesIO class for Python 2). The other is the ConfigParser, which has just been renamed to configparser. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20181022135307.14398-9-mreitz@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30iotests: 'new' module replacement in 169Max Reitz
iotest 169 uses the 'new' module to add methods to a class. This module no longer exists in Python 3. Instead, we can use a lambda. Best of all, this works in 2.7 just as well. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20181022135307.14398-8-mreitz@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30iotests: Explicitly bequeath FDs in PythonMax Reitz
Python 3.4 introduced the inheritable attribute for FDs. At the same time, it changed the default so that all FDs are not inheritable by default, that only inheritable FDs are inherited to subprocesses, and only if close_fds is explicitly set to False. Adhere to this by setting close_fds to False when working with subprocesses that may want to inherit FDs, and by trying to set_inheritable() on FDs that we do want to bequeath to them. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20181022135307.14398-7-mreitz@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30iotests: Different iterator behavior in Python 3Max Reitz
In Python 3, several functions now return iterators instead of lists. This includes range(), items(), map(), and filter(). This means that if we really want a list, we have to wrap those instances with list(). But then again, the two instances where this is the case for map() and filter(), there are shorter expressions which work without either function. On the other hand, sometimes we do just want an iterator, in which case we have sometimes used xrange() and iteritems() which no longer exist in Python 3. Just change these calls to be range() and items(), works in both Python 2 and 3, and is really what we want in 3 (which is what matters). But because it is so simple to do (and to find and remove once we completely switch to Python 3), make range() be an alias for xrange() in the two affected tests (044 and 163). In one instance, we only wanted the first instance of the result of a filter() call. Instead of using next(filter()) which would work only in Python 3, or list(filter())[0] which would work everywhere but is a bit weird, this instance is changed to use a generator expression with a next() wrapped around, which works both in 2.7 and 3. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20181022135307.14398-6-mreitz@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30iotests: Use // for Python integer divisionMax Reitz
In Python 3, / is always a floating-point division. We usually do not want this, and as Python 2.7 understands // as well, change all integer divisions to use that. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20181022135307.14398-5-mreitz@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30iotests: Use Python byte strings where appropriateMax Reitz
Since byte strings are no longer the default in Python 3, we have to explicitly use them where we need to, which is mostly when working with structures. It also means that we need to open a file in binary mode when we want to use structures. On the other hand, we have to accomodate for the fact that some functions (still) work with byte strings but we want to use unicode strings (in Python 3 at least, and it does not matter in Python 2). This includes base64 encoding, but it is most notable when working with the subprocess module: Either we set universal_newlines to True so that the default streams are opened in text mode (hence this parameter is aliased as "text" as of 3.7), or, if that is not possible, we have to decode the output to a normal string. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20181022135307.14398-4-mreitz@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30iotests: Flush in iotests.py's QemuIoInteractiveMax Reitz
After issuing a command, flush the pipe. This does not change anything in Python 2, but it makes a difference in Python 3. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20181022135307.14398-3-mreitz@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30iotests: Make nbd-fault-injector flushMax Reitz
When closing a connection, make the nbd-fault-injector flush the socket. Without this, the output is a bit unreliable with Python 3. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20181022135307.14398-2-mreitz@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30scripts/device-crash-test: Remove devices that are not user_creatable anymoreThomas Huth
Devices that are derived from TYPE_SYS_BUS_DEVICE are not user_creatable anymore by default, and some others have been marked as non-user_creatable manually, so we can remove these devices from the "ignore"-list in the device-crash-test script. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1538729067-7944-1-git-send-email-thuth@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-30qga: ignore non present cpus when handling qmp_guest_get_vcpus()Igor Mammedov
If VM has VCPUs plugged sparselly (for example a VM started with 3 VCPUs (cpu0, cpu1 and cpu2) and then cpu1 was hotunplugged so only cpu0 and cpu2 are present), QGA will rise a error error: internal error: unable to execute QEMU agent command 'guest-get-vcpus': open("/sys/devices/system/cpu/cpu1/"): No such file or directory when virsh vcpucount FOO --guest is executed. Fix it by ignoring non present CPUs when fetching CPUs status from sysfs. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-30qga-win: add support for qmp_guest_fsfreeze_freeze_listChen Hanxiao
This patch add support for freeze specified fs. The valid mountpoints list member are [1]: The path of a mounted folder, for example, Y:\MountX\ A drive letter, for example, D:\ A volume GUID path of the form \\?\Volume{GUID}\, where GUID identifies the volume A UNC path that specifies a remote file share, for example, \\Clusterx\Share1\ [1] https://docs.microsoft.com/en-us/windows/desktop/api/vsbackup/nf-vsbackup-ivssbackupcomponents-addtosnapshotset Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-30qga: Support Unicode paths in guest-file-open on win32Jonathon Reinhart
Currently, the win32 port of QEMU Guest Agent does not properly handle Unicode paths. The JSON decoder produces a valid UTF-8 path string, but this is passed directly to CreateFileA, which is expecting an ANSI string and not UTF-8. This leads to mangled filenames. This patch follows the example of qmp_guest_set_user_password() and uses g_utf8_to_utf16() to convert the string to UTF-16 and calls CreateFileW() explicitly. Signed-off-by: Jonathon Reinhart <jreinhart@cc-sw.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-30tpm: Zero-init structure to avoid uninitialized variables in valgrind logStefan Berger
Zero-init the ptm_loc structure so that we don't have fields that are not initialised. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2018-10-30MAINTAINERS: Change my email address to the new domainStefan Berger
My old email address will soon not work anymore, so change it to the new domain. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
2018-10-30docs: tpm: Mention implemented TPM CRB interface emulation and specsStefan Berger
Add a few sentences about the implemented emulation of the TPM CRB interface and its specification. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-10-30linux-user/flatload: fix initial stack pointer alignmentMax Filippov
Stack pointer alignment code incorrectly adds stack_size to sp instead of subtracting it. It also does not take flat_argvp_envp_on_stack() into account when calculating stack_size. This results in initial stack pointer misalignment with certain set of command line arguments and environment variables and correct alignment for the same binary with a different set of arguments. This misalignment causes failures in the following tests in the testsuite of gcc built for xtensa uclinux: gcc.dg/torture/vshuf-v64qi.c gcc.dg/torture/vshuf-v8sf.c gcc.dg/torture/vshuf-v8si.c Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-10-30Add qemu-riscv@nongnu.org as the RISC-V listPalmer Dabbelt
We now have a RISC-V specific QEMU development list. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-30Add Alistair as a RISC-V MaintainerPalmer Dabbelt
Alistair has been contributing to the RISC-V QEMU port for a while now so I'd like him to be officially listed as a maintainer. I've checked with the other RISC-V maintainers and there are no objections, and I've also checked with Alistair so he knows I'm volunteering him. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-30target/riscv/pmp.c: pmpcfg_csr_read returns bogus value on RV64Dayeol Lee
pmp_read_cfg() returns 8-bit value, which is combined together to form a single pmpcfg CSR. The default promotion rules will result in an integer here ("i*8" is integer, which flows through) resulting in a 32-bit signed value on most hosts. That's bogus on RV64I, with the high bits of the CSR being wrong. Signed-off-by: Dayeol Lee <dayeol@berkeley.edu> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-30tests/tpm: Display if swtpm is not found or --tpm2 not supportedMarc-André Lureau
If swtpm is not found in $PATH or --tpm2 isn't supported, we display this in the test log. We cannot mark the test as skipped due to a bug in certain versions of the gtester environment that interprets a skipped test as failure. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2018-10-30Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging QEMU trivial patches collected between June and October 2018 (Thank you to Thomas Huth) v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé built in a 32bit debian sid chroot # gpg: Signature made Tue 30 Oct 2018 11:23:01 GMT # gpg: using RSA key F30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" # gpg: aka "Laurent Vivier <laurent@vivier.eu>" # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request: milkymist-minimac2: Use qemu_log_mask(GUEST_ERROR) instead of error_report ppc: move at24c to its own CONFIG_ symbol hw/intc/gicv3: Remove useless parenthesis around DIV_ROUND_UP macro hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro tests/bios-tables-test: Remove an useless cast xen: Use the PCI_DEVICE macro qobject: Catch another straggler for use of qdict_put_str() configure: Support pkg-config for zlib tests: Fix typos in comments and help message (found by codespell) cpu.h: fix a typo in comment linux-user: fix comment s/atomic_write/atomic_set/ qemu-iotests: make 218 executable scripts/qemu.py: remove trailing quotes on docstring scripts/decodetree.py: remove unused imports docs/devel/testing.rst: add missing newlines after code block qemu-iotests: fix filename containing checks tests/tcg/README: fix location for lm32 tests memory.h: fix typos in comments vga_int: remove unused function protype configs/alpha: Remove unused CONFIG_PARALLEL_ISA switch Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-30Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into ↵Peter Maydell
staging Pull request # gpg: Signature made Mon 29 Oct 2018 21:24:08 GMT # gpg: using RSA key 7DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jnsnow/tags/bitmaps-pull-request: iotests: 169: add cases for source vm resuming iotests: improve 169 dirty-bitmaps: clean-up bitmaps loading and migration logic bitmap: Update count after a merge nbd: forbid use of frozen bitmaps block/backup: prohibit backup from using in use bitmaps block/dirty-bitmaps: prohibit enable/disable on locked/frozen bitmaps block/dirty-bitmaps: allow clear on disabled bitmaps block/dirty-bitmaps: fix merge permissions block/dirty-bitmaps: add user_locked status checker bloc/qcow2: drop dirty_bitmaps_loaded state variable block/qcow2: improve error message in qcow2_inactivate iotests: 169: drop deprecated 'autoload' parameter qapi: add transaction support for x-block-dirty-bitmap-merge blockdev: rename block-dirty-bitmap-clear transaction handlers dirty-bitmap: make it possible to restore bitmap after merge dirty-bitmap: rename bdrv_undo_clear_dirty_bitmap dirty-bitmap: switch assert-fails to errors in bdrv_merge_dirty_bitmap blockdev-backup: add bitmap argument Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 04:09:10 +0000