aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-09-08scsi-disk: respect the page control (PC) field in the MODE SENSE commandBernhard Kohl
The page control (PC) field defines the type of mode parameter values to be returned in the mode pages: PC=0 : Current values PC=1 : Changeable values PC=2 : Default values PC=3 : Saved values The current implementation always returns the same type of parameters. This is OK for Current and Default values as we don't support changes to be done by the MODE SELECT command. For Saved values the following applies (implemented by this patch): "A PC field value of 3h requests that the target return the saved values of the mode parameters. Implementation of saved page parameters is optional. Mode parameters not supported by the target shall be set to zero. If saved values are not implemented, the command shall be terminated with CHECK CONDITION status, the sense key set to ILLEGAL REQUEST and the additional sense code set to SAVING PARAMETERS NOT SUPPORTED." For Changeable values the following applies (implemented by this patch): "A PC field value of 1h requests that the target return a mask denoting those mode parameters that are changeable. In the mask, the fields of the mode parameters that are changeable shall be set to all one bits and the fields of the mode parameters that are non-changeable (i.e. defined by the target) shall be set to all zero bits." In newer versions of the SCSI-2 spec the following clause was added. "If the logical unit does not implement changeable parameters mode pages and the device server receives a MODE SENSE command with 01b in the PC field, then the command shall be terminated with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD IN CDB." This was not yet included in the SCSI-2 Working Drafts from 1986-1993. I assume that the variant to return CHECK CONDITION for PC=1 is not widely implemented by real devices. I have a legacy OS which fails, if MODE_SENSE returns non GOOD for PC=1. So for highest compatibility I implemented the former variant with this patch. The last Working Draft X3T9.2 Rev. 10L 7-SEP-93 can be found here: http://ldkelley.com/SCSI2/SCSI2/SCSI2-08.html#8.2.10 In mode_sense_page() this patch also avoids multiple hard coded definitions of the same mode page length. Instead I use the varable p[1]. In fact the returned length of the mode pages 4 and 5 were wrong (2 bytes less). Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-09-08scsi-disk: fix the mode data header returned by the MODE SENSE(10) commandBernhard Kohl
The header for the MODE SENSE(10) command is 8 bytes long. Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-09-08scsi-disk: fix the mode data length field returned by the MODE SENSE commandBernhard Kohl
The MODE DATA LENGTH field indicates the length in bytes of the following data that is available to be transferred. The mode data length does not include the number of bytes in the MODE DATA LENGTH field. Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-30savevm: Generate a name when run without oneMiguel Di Ciurcio Filho
When savevm is run without a name, the name stays blank and the snapshot is saved anyway. The new behavior is when savevm is run without parameters a name will be created automaticaly, so the snapshot is accessible to the user without needing the id when loadvm is run. (qemu) savevm (qemu) info snapshots ID TAG VM SIZE DATE VM CLOCK 1 vm-20100728134640 978K 2010-07-28 13:46:40 00:00:08.603 We use a name with the format 'vm-YYYYMMDDHHMMSS'. This is a first step to hide the internal id, because I don't see a reason to expose this kind of internals to the user. Signed-off-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-30monitor: make 'info snapshots' show only fully available snapshotsMiguel Di Ciurcio Filho
The output generated by 'info snapshots' shows only snapshots that exist on the block device that saves the VM state. This output can cause an user to erroneously try to load an snapshot that is not available on all block devices. $ qemu-img snapshot -l xxtest.qcow2 Snapshot list: ID TAG VM SIZE DATE VM CLOCK 1 1.5M 2010-07-26 16:51:52 00:00:08.599 2 1.5M 2010-07-26 16:51:53 00:00:09.719 3 1.5M 2010-07-26 17:26:49 00:00:13.245 4 1.5M 2010-07-26 19:01:00 00:00:46.763 $ qemu-img snapshot -l xxtest2.qcow2 Snapshot list: ID TAG VM SIZE DATE VM CLOCK 3 0 2010-07-26 17:26:49 00:00:13.245 4 0 2010-07-26 19:01:00 00:00:46.763 Current output: $ qemu -hda xxtest.qcow2 -hdb xxtest2.qcow2 -monitor stdio -vnc :0 QEMU 0.12.4 monitor - type 'help' for more information (qemu) info snapshots Snapshot devices: ide0-hd0 Snapshot list (from ide0-hd0): ID TAG VM SIZE DATE VM CLOCK 1 1.5M 2010-07-26 16:51:52 00:00:08.599 2 1.5M 2010-07-26 16:51:53 00:00:09.719 3 1.5M 2010-07-26 17:26:49 00:00:13.245 4 1.5M 2010-07-26 19:01:00 00:00:46.763 Snapshots 1 and 2 do not exist on xxtest2.qcow, but they are displayed anyway. This patch sumarizes the output to only show fully available snapshots. New output: (qemu) info snapshots ID TAG VM SIZE DATE VM CLOCK 3 1.5M 2010-07-26 17:26:49 00:00:13.245 4 1.5M 2010-07-26 19:01:00 00:00:46.763 Signed-off-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-30posix-aio-compat: Fix async_conmtext for ioctlAndrew de Quincey
Set the async_context_id field when queuing an async ioctl call Signed-off-by: Andrew de Quincey <adq@lidskialf.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-30nbd: Introduce NBD named exports.Laurent Vivier
This patch allows to connect Qemu using NBD protocol to an nbd-server using named exports. For instance, if on the host "isoserver", in /etc/nbd-server/config, you have: [generic] [debian-500-ppc-netinst] exportname = /ISO/debian-500-powerpc-netinst.iso [Fedora-10-ppc-netinst] exportname = /ISO/Fedora-10-ppc-netinst.iso You can connect to it, using: qemu -cdrom nbd:isoserver:exportname=debian-500-ppc-netinst qemu -cdrom nbd:isoserver:exportname=Fedora-10-ppc-netinst NOTE: you need at least nbd-server 2.9.18 Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-30vvfat: fat_chksum(): fix access above array boundsLoïc Minier
Signed-off-by: Loïc Minier <loic.minier@linaro.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-30qemu-img rebase: Open new backing file read-onlyKevin Wolf
We never write to a backing file, so opening rw is useless. It just means that you can't rebase on top of a file for which you don't have write permissions. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-30sheepdog: remove unnecessary includesIzumi Tsutsui
"qemu_socket.h" includes all necessary files and including <netinet/tcp.h> without <netinet/in.h> could cause errors on some systems. Signed-off-by: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-30block: Fix image re-open in bdrv_commitKevin Wolf
Arguably we should re-open the backing file with the backing file format and not with the format of the snapshot image. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-30virtio-blk: Fix migration of queued requestsKevin Wolf
in_sg[].iovec and out_sg[].ioved are pointer to (source) host memory and therefore invalid after migration. When loading the device state we must create a new mapping on the destination host. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-30virtio: Factor virtqueue_map_sg outKevin Wolf
Separate the mapping of requests to host memory from the descriptor iteration. The next patch will make use of it in a different context. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-28isapc: fix segfault.Isaku Yamahata
https://bugs.launchpad.net/bugs/611646 reports that ./i386-softmmu/qemu -M isapc segfaults. This patch fixes the segfault introduced by f885f1eaa8711c06033ceb1599e3750fb37c306f It's because i440fx_state in pc_init1() isn't initialized. > Core was generated by `./i386-softmmu/qemu -M isapc'. > Program terminated with signal 11, Segmentation fault. > [New process 19686] > at qemu/hw/piix_pci.c:136 > (gdb) where > at qemu/hw/piix_pci.c:136 > boot_device=0x7fffe1f5b040 "cad", kernel_filename=0x0, > kernel_cmdline=0x6469bf "", initrd_filename=0x0, > cpu_model=0x654d10 "486", pci_enabled=0) > at qemu/hw/pc_piix.c:178 > boot_device=0x7fffe1f5b040 "cad", kernel_filename=0x0, > kernel_cmdline=0x6469bf "", initrd_filename=0x0, cpu_model=0x654d10 "486") > at qemu/hw/pc_piix.c:207 > envp=0x7fffe1f5b188) > at qemu/vl.c:2871 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-28Fix segfault in mmio subpage handling code.Gleb Natapov
It is possible that subpage mmio is registered over existing memory page. When this happens "memory" will have real memory address and not index into io_mem array so next access to the page will generate segfault. It is uncommon to have some part of a page to be accessed as memory and some as mmio, but qemu shouldn't crash even when guest does stupid things. So lets just pretend that the rest of the page is unassigned if guest configure part of the memory page as mmio. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-26etraxfs_eth: correct use of ! and &Blue Swirl
Combining bitwise AND and logical NOT is suspicious. Fixed by this Coccinelle script: // From http://article.gmane.org/gmane.linux.kernel/646367 @@ expression E1,E2; @@ ( !E1 & !E2 | - !E1 & E2 + !(E1 & E2) ) Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-26Sparc: update OpenBIOS images to r859Blue Swirl
Update Sparc32 and Sparc64 OpenBIOS images to SVN revision 859. Bring also pc-bios/README up to date including the update performed by 419ef5f1c6a9614e8ddcb0b0f826de692e7e4a43. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-26ppc4xx: load Bamboo kernel, initrd, and fdt at fixed addressesHollis Blanchard
We can't use the return value of load_uimage() for the kernel because it can't account for BSS size, and the PowerPC kernel does not relocate blobs before zeroing BSS. Instead, we now load at the fixed addresses chosen by u-boot (the normal firmware for the board). Signed-off-by: Hollis Blanchard <hollis@penguinppc.org>
2010-08-26ppc4xx: don't unregister RAM at resetHollis Blanchard
The PowerPC 4xx SDRAM controller emulation unregisters RAM in its reset callback. However, qemu_system_reset() is now called at initialization time, so all RAM is unregistered before starting the guest (!). Signed-off-by: Hollis Blanchard <hollis@penguinppc.org>
2010-08-26ppc4xx: correct SDRAM controller warning message conditionHollis Blanchard
The message "Truncating memory to %d MiB to fit SDRAM controller limits" should be displayed only when a user chooses an amount of RAM which can't be represented by the PPC 4xx SDRAM controller (e.g. 129MB, which would only be valid if the controller supports a bank size of 1MB). Signed-off-by: Hollis Blanchard <hollis@penguinppc.org>
2010-08-26Fix "make install" with a cross toolchainHollis Blanchard
We must be able to use a non-native strip executable, but not all versions of 'install' support the --strip-program option (e.g. OpenBSD). Accordingly, we can't use 'install -s', and we must run strip separately. Signed-off-by: Hollis Blanchard <hollis@penguinppc.org> Cc: blauwirbel@gmail.com
2010-08-26PPC: Update openbios binary to r859Alexander Graf
This updates the openBIOS binary to r589, adding support for PPC PV feature pass-through in KVM. Signed-off-by: Alexander Graf <agraf@suse.de>
2010-08-26PPC: Add PV hypercall transport through fw_cfgAlexander Graf
On KVM for PPC we need to tell the guest which instructions to use when doing a hypercall. The clean way to do this is to go through an ioctl from userspace and passing it on to the guest using the device tree. So let's do the qemu part here: read out the hypercall and pass it on to the guest's fw_cfg so openBIOS can read it out and expose it again. Signed-off-by: Alexander Graf <agraf@suse.de>
2010-08-24Rearrange block headersBlue Swirl
Changing block.h or blockdev.h resulted in recompiling most objects. Move DriveInfo typedef and BlockInterfaceType enum definitions to qemu-common.h and rearrange blockdev.h use to decrease churn. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-23Merge remote branch 'qemu-kvm/uq/master' into stagingAnthony Liguori
2010-08-22compile -fsdev and -virtfs cmd line options unconditionally.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22QemuOpts: make most qemu_*_opts staticGerd Hoffmann
Switch tree to lookup-by-name using qemu_find_opts(). Also hook up virtfs options so qemu_find_opts works for them too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22QemuOpts: allow new option groups be registered at runtime.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22VGA: Don't register deprecated VBE rangeAlex Williamson
Old versions of the BOCHs VGA BIOS (cira 2003) made use of VBE registers at 0xff80/81. In VBE API version 0xb0c2 these were moved to 0x1ce/cf. Unfortunately, QEMU still registers handlers for the old range. If a guest attempts to assign an I/O device overlapping this region, QEMU exits with a hw_error. Windows guests seem to like to assign I/O devices to the high end of the address space, so it's pretty easy to hot add an rtl8139 to a Win2k8 guest and trigger the bug. I can't find any reason to register these handlers, so let's remove the cruft. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22QMP: Update README fileLuiz Capitulino
A number of changes I prefer to do in one shot: - Fix example - Small clarifications - Add multiple monitors example - Add 'Development Process' section Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22QMP doc: Add 'Stability Considerations' sectionLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22QMP/monitor: update do_info_version() to output broken down version stringMiguel Di Ciurcio Filho
This code was originally developed by Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22QMP: update 'query-version' documentationMiguel Di Ciurcio Filho
Update the documentation of 'query-version' to output the string version broken down. Signed-off-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22vnc: check fd before calling qemu_set_fd_handler2() in vnc_client_write()Yoshiaki Tamura
Setting fd = -1 to qemu_set_fd_handler2() causes bus error at FD_SET in main_loop_wait(). Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22virtio-serial: Cleanup on device hot-unplugAmit Shah
Free malloc'ed memory, unregister from savevm and clean up virtio-common bits on device hot-unplug. This was found performing a migration after device hot-unplug. Reported-by: <lihuang@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22target-i386: svm: Fix MSRPM checkAdam Lackorzynski
Correct the calculation of the offset in the msrpm for the MSR range 0 - 0x1fff. Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22exec: remove code duplication in qemu_ram_alloc() and qemu_ram_alloc_from_ptr()Yoshiaki Tamura
Since most of the code in qemu_ram_alloc() and qemu_ram_alloc_from_ptr() are duplicated, let qemu_ram_alloc_from_ptr() to switch by checking void *host, and change qemu_ram_alloc() to a wrapper. Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22exec: replace tabs by spaces.Yoshiaki Tamura
Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22arch_init: replace tabs by spaces.Yoshiaki Tamura
Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22pckbd: support for commands 0xf0-0xff: Pulse output bitBernhard Kohl
I have a guest OS which sends the command 0xfd to the keyboard controller during initialization. To get rid of the message "qemu: unsupported keyboard cmd=0x%02x\n" I added support for the pulse output bit commands. I found the following explanation here: http://www.win.tue.nl/~aeb/linux/kbd/scancodes-11.html#ss11.3 Command 0xf0-0xff: Pulse output bit Bits 3-0 of the output port P2 of the keyboard controller may be pulsed low for approximately 6 µseconds. Bits 3-0 of this command specify the output port bits to be pulsed. 0: Bit should be pulsed. 1: Bit should not be modified. The only useful version of this command is Command 0xfe. (For MCA, replace 3-0 by 1-0 in the above.) Command 0xfe: System reset Pulse bit 0 of the output port P2 of the keyboard controller. This will reset the CPU. Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-20Replace qemu_malloc + memset with qemu_malloczBlue Swirl
Replace a qemu_malloc call, followed by a memset, with qemu_mallocz. Found with this Coccinelle semantic patch, adapted from Coccinelle test package rule 94: @@ type T; expression x; expression E; @@ - x = (T)qemu_malloc(E) + x = qemu_mallocz(E) ... ( - memset(x,0,E); | - memset(x,0,sizeof(*x)); ) Some files (tests/*) had to be filtered out. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-20Use ARRAY_SIZE macroBlue Swirl
Replace array size calculations with ARRAY_SIZE macro. Implemented with this Coccinelle semantic patch, adapted from Linux kernel: @@ type T; T[] E; @@ - (sizeof(E)/sizeof(*E)) + ARRAY_SIZE(E) @@ type T; T[] E; @@ - (sizeof(E)/sizeof(E[...])) + ARRAY_SIZE(E) @@ type T; T[] E; @@ - (sizeof(E)/sizeof(T)) + ARRAY_SIZE(E) Some files (*-dis.c, tests/*) had to be filtered out. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-19Remove useless NULL check for qemu_strdup return valueBlue Swirl
Found with this Coccinelle semantic patch: @@ expression E; identifier ptr; identifier fn ~= "qemu_strn?dup"; @@ -ptr = fn(E); -if (ptr == NULL) { ... } - +ptr = fn(E); Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-19Remove useless NULL checks for qemu_malloc return valueBlue Swirl
Found with this Coccinelle semantic patch: @@ expression E; identifier ptr; identifier fn ~= "qemu_mallocz*"; @@ -ptr = fn(E); -if (ptr == NULL) { ... } - +ptr = fn(E); Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-19savevm: Reset last block info at beginning of each saveAlex Williamson
If we save more than once we need to reset the last block info or else only the first save has the actual block info and each subsequent save will only use continue flags, making them unloadable independently. Found-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-19set proper migration status on ->write error (v5)Marcelo Tosatti
If ->write fails, declare migration status as MIG_STATE_ERROR. Also, in buffered_file.c, ->close the object in case of an error. Fixes "migrate -d "exec:dd of=file", where dd fails to open file. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-19rtc: Remove TARGET_I386 from qemu-config.c, enables driftfixAmit Shah
qemu-config.c doesn't contain any target-specific code, and the TARGET_I386 conditional code didn't get compiled as a result. Removing this enables the driftfix parameter for rtc. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-19QEMUFileBuffered: indicate that we're ready when the underlying file is readyAvi Kivity
QEMUFileBuffered stops writing when the underlying QEMUFile is not ready, and tells its producer so. However, when the underlying QEMUFile becomes ready, it neglects to pass that information along, resulting in stoppage of all data until the next tick (a tenths of a second). Usually this doesn't matter, because most QEMUFiles used with QEMUFileBuffered are almost always ready, but in the case of exec: migration this is not true, due to the small pipe buffers used to connect to the target process. The result is very slow migration. Fix by detecting the readiness notification and propagating it. The detection is a little ugly since QEMUFile overloads put_buffer() to send it, but that's the suject for a different patch. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-15sparc escc IUS improvements (SunOS 4.1.4 fix)Artyom Tarasenko
According to scc_escc_um.pdf: - Reset Highest IUS must update irq status to allow processing of the next priority interrupt. - rx interrupt has always higher priority than tx on same channel The documentation only explicitly says that Reset Highest IUS command (0x38) clears IUS bits, not that it clears the corresponding interrupt too, so don't clear interrupts on this command. The patch allows SunOS 4.1.4 to use the serial ports Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-15Fix mingw32 buildBlue Swirl
Don't define qemu_chr_open_eventfd() on Windows. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-01 14:58:44 +0000