| Age | Commit message (Collapse) | Author |
|---|
|
Instead of accessing the flags from the floating point control
register after updating it, read the softfloat flags.
This is just code cleanup and should not change the behaviour.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
For each FPU instruction that can trigger an FPU exception, to call
call update_fcr31() after.
Remove the manual NaN assignment in case of float to float operation, as
softfloat is already taking care of that. However for float to int
operation, the value has to be changed to the MIPS one. In the cvtpw_ps
case, the two registers have to be handled separately to guarantee
a correct final value in both registers.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Instead of clearing the softfloat exception flags before each floating
point instruction, reset them to 0 in update_fcr31() when an exception
is detected.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Use the new softfloat floatXX_muladd() functions to implement the madd,
msub, nmadd and nmsub instructions. At the same time replace the name of
the helpers by the name of the instruction, as the only reason for the
previous names was to keep the macros simple.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add a pickNaNMulAdd function for MIPS, implementing NaN propagation
rules for MIPS fused multiply-add instructions.
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
When the CPU state after a possible retranslation is going to be handled
through code retranslation, we don't need to save the CPU state before.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
When the CPU state is restored through retranslation after an exception,
btarget should also be restored.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Commit 9c43b68de628a1e2cba556adfb71c17028eb802e do not correctly check
for dead outputs when they need to be synced to memory in case of
half-dead operations.
Fix that by applying the same pattern than for the default case.
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Mark helper functions that raise exceptions, but otherwise do not
change TCG register state, with TCG_CALL_NO_WG.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
As the block layer may decide to flush bottom-halfs while the machine is
still initializing (e.g. to read geometry data from the disk), our
postponed open event may be processed before the last frontend
registered with a muxed chardev.
Until the semantics of BHs have been clarified, use an expired timer to
achieve the same effect (suggested by Paolo Bonzini). This requires to
perform the alarm timer initialization earlier as otherwise timer
subsystem can be used before being ready.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
|
|
All switch() decoding instruction have a default entry, so it is possible
to have unused enum entries. Remove conditional definitions of MIPS64
opcode enums, as it only makes the code less readable.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Change DSP r1 & DSP r2 into microMIPS DSP encodings in TODO file.
Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add MIPS ASE DSP testcases.
Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add 74kf and mips64dspr2-generic-cpu model for test.
Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add MIPS ASE DSP Accumulator and DSPControl Access instructions.
Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add MIPS ASE DSP Compare-Pick instructions.
Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add MIPS ASE DSP Bit/Manipulation instructions.
Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add MIPS ASE DSP Multiply instructions.
Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add MIPS ASE DSP GPR-Based Shift instructions.
Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add MIPS ASE DSP Arithmetic instructions.
Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add MIPS ASE DSP Load instructions.
Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add MIPS ASE DSP Branch instructions.
Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add MIPS ASE DSP resources access check.
Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add internal functions using by MIPS ASE DSP instructions.
Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add missing stubs to win32 to fix link failure.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
With i386-linux-user target on x86_64 host, this does not introduce any new test
failures.
Signed-off-by: Catalin Patulea <catalinp@google.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
gcc will silently accept unrecognized -Wno-wombat warning suppression
options (it only mentions them if it has to print a compiler warning
for some other reason). Since we already run a check for whether gcc
recognizes the warning options we use, we can easily make this use
the positive sense of the option when checking for support for the
suppression option. This doesn't have any effect except that it avoids
gcc emitting extra messages about unrecognized command line options
when it is printing other warning messages.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
There is some read-after-write error within the OP=2 insns which
prevents setting cpu_dst to the real output register. Until this
is found and fixed, always write to a temporary first.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
* 'qspi.2' of git://developer.petalogix.com/public/qemu:
xilinx_zynq: added QSPI controller
xilinx_spips: Generalised to model QSPI
m25p80: Support for Quad SPI
|
|
* 's390-for-upstream' of git://repo.or.cz/qemu/agraf:
s390: sclp ascii console support
s390: sclp signal quiesce support
s390: sclp event support
s390: sclp base support
s390: use sync regs for register transfer
s390/kvm_stat: correct sys_perf_event_open syscall number
s390x: fix -initrd in virtio machine
|
|
MIPS32 and later instruction sets have a multiplication instruction
directly operating on GPRs. It only produces a 32-bit result but
it is exactly what is needed by QEMU.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
The memory core drops regions that are hidden by another region (for example,
during BAR sizing), but it doesn't do so correctly if the lower address of the
existing range is below the lower address of the new range.
Example (qemu-system-mips -M malta -kernel vmlinux-2.6.32-5-4kc-malta
-append "console=ttyS0" -nographic -vga cirrus):
Existing range: 10000000-107fffff
New range: 100a0000-100bffff
Correct behaviour: drop new range
Incorrect behaviour: add new range
Fix by taking this case into account (previously we only considered
equal lower boundaries).
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
virtio,pci infrastructure
This includes infrastructure patches that don't do much by themselves
but should help vfio and q35 make progress.
Also included is rework of virtio-net to use iovec APIs
for vector access - helpful to make it more secure
and in preparation for a new feature that will allow
arbitrary s/g layout for guests.
Also included is a pci bridge bugfix by Avi.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* mst/tags/for_anthony: (25 commits)
pci: avoid destroying bridge address space windows in a transaction
virtio-net: enable mrg buf header in tap on linux
virtio-net: test peer header support at init time
virtio-net: minor code simplification
virtio-net: simplify rx code
virtio-net: switch tx to safe iov functions
virtio-net: first s/g is always at start of buf
virtio-net: refactor receive_hdr
virtio-net: use safe iov operations for rx
virtio-net: avoid sg copy
iov: add iov_cpy
virtio-net: track host/guest header length
pcie: Convert PCIExpressHost to use the QOM.
pcie: pass pcie window size to pcie_host_mmcfg_update()
pci: Add class 0xc05 as 'SMBus'
pci: introduce pci_swizzle_map_irq_fn() for standardized interrupt pin swizzle
pci_ids: add intel 82801BA pci-to-pci bridge id
pci: pci capability must be in PCI space
pci: make each capability DWORD aligned
qemu: enable PV EOI for qemu 1.3
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This code adds console support by implementing SCLP's ASCII Console
Data event. This is the same console as LPARs ASCII console or z/VMs
sysascii.
The console can be specified manually with something like
-chardev stdio,id=charconsole0 -device sclpconsole,chardev=charconsole0,id=console0
Newer kernels will autodetect that console and prefer that over virtio
console.
When data is received from the character layer it creates a service
interrupt to trigger a Read Event Data command from the guest that will
pick up the received character byte-stream.
When characters are echo'ed by the linux guest a Write Event Data occurs
which is forwarded by the Event Facility to the console that supports
a corresponding mask value.
Console resizing is not supported.
The character layer byte-stream is buffered using a fixed size iov
buffer.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This implements the sclp signal quiesce event via the SCLP Event
Facility.
This allows to gracefully shutdown a guest by using system_powerdown
notifiers. It creates a service interrupt that will trigger a
Read Event Data command from the guest. This code will then add an
event that is interpreted by linux guests as ctrl-alt-del.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Several SCLP features are considered to be events. Those events don't
provide SCLP commands on their own, instead they are all based on
Read Event Data, Write Event Data, Write Event Mask and the service
interrupt. Follow-on patches will provide SCLP's Signal Quiesce (via
system_powerdown) and the ASCII console.
Further down the road the sclp line mode console and configuration
change events (e.g. cpu hotplug) can be implemented.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This adds a more generic infrastructure for handling Service-Call
requests on s390. Currently we only support a small subset of Read
SCP Info directly in target-s390x. This patch provides the base
infrastructure for supporting more commands and moves Read SCP
Info.
In the future we could add additional commands for hotplug, call
home and event handling.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Newer kernels provide the guest registers in kvm_run. Lets use
those if available (i.e. the capability is set). This avoids
ioctls on cpu_synchronize_state making intercepts faster.
In addition, we have now the prefix register, the access registers
the control registers up to date. This helps in certain cases,
e.g. for resolving kernel module addresses with gdb on a guest.
On return, we update the registers according to the level statement,
i.e. we put all registers for KVM_PUT_FULL_STATE and _RESET_STATE.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Correct sys_perf_event_open syscall number for s390 architecture
- the hardcoded syscall number 298 is for x86 but should
be different for other architectures.
In case we figure out via /proc/cpuinfo that we are running
on s390 the appropriate syscall number is used from map
syscall_numbers; other architectures can extend this.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
When using -initrd in the virtio machine, we need to indicate the initrd
start and size inside the kernel image. These parameters need to be stored
in native endianness.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Calling memory_region_destroy() in a transaction is illegal (and aborts),
as until the transaction is committed, the region remains live.
Fix by moving destruction until after the transaction commits. This requires
having an extra set of regions, so the new and old regions can coexist.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Modern linux supports arbitrary header size,
which makes it possible to pass mrg buf header
to tap directly without iovec mangling.
Use this capability when it is there.
This removes the need to deal with it in
vhost-net as we do now.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
There's no reason to query header support at random
times: at load or feature query.
Driver also might not query functions.
Cleaner to do it at device init.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
During packet filtering, we can now use host hdr len
to offset incoming buffer unconditionally.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Remove code duplication using guest header length that we track.
Drop specific layout requirement for rx buffers: things work
using generic iovec functions in any case.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Avoid mangling iovec manually: use safe iov_*
functions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We know offset is 0, assert that.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Now that we know host hdr length, we don't need to
duplicate the logic in receive_hdr: caller can
figure out the offset itself.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Avoid magling iov manually: use safe iov operations
for processing packets incoming to guest.
This also removes the requirement for virtio header to
fit the first s/g entry exactly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
