aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-08target-ppc: Implement mulldo with TCGTom Musta
Optimize mulldo by using the muls2_i64 operation rather than a helper. Eliminate the obsolete helper code. Signed-off-by: Tom Musta <tommusta@gmail.com> Suggested-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08target-ppc: Clean up mullwoTom Musta
Simplify the implementation of mullwo. For 64 bit CPUs, the result is the concatenation of the upper and lower parts of the muls2_i32 operation, which may be slightly better than deposit. For 32 bit CPUs, the lower part of the muls_i32 operation is moved into the target GPR. Signed-off-by: Tom Musta <tommusta@gmail.com> Suggested-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08target-ppc: Clean Up mullwTom Musta
Eliminate the unecessary ext32s TCG operation and make the multiplication operation explicitly 32 bit. Signed-off-by: Tom Musta <tommusta@gmail.com> Suggested-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08target-ppc: Optimize rlwnm MB=0 ME=31Tom Musta
Optimize the special case of rlwnm where MB=0 and ME=31. This can be implemented using a ROTL. Suggested-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08target-ppc: Optimize rlwinm MB=0 ME=31Tom Musta
Optimize the special case of rlwinm where MB=0 and ME=31. This can be implemented as a 32-bit ROTL. Signed-off-by: Tom Musta <tommusta@gmail.com> Suggested-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08target-ppc: Special Case of rlwimi Should Use DepositTom Musta
The special case of rlwimi where MB <= ME and SH = 31-ME can be implemented with a single TCG deposit operation. This replaces the less general case of SH = MB = 0 and ME = 31. Signed-off-by: Tom Musta <tommusta@gmail.com> Suggested-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr-vlan: Don't touch last entry in buffer listAnton Blanchard
The last 8 bytes of the buffer list is defined to contain the number of dropped frames. At the moment we use it to store rx entries, which trips up ethtool -S: rx_no_buffer: 9223380832981355136 Fix this by skipping the last buffer list entry. Signed-off-by: Anton Blanchard <anton@samba.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr_pci: Fix config space corruptionAlexey Kardashevskiy
When disabling MSI/MSIX via "ibm,change-msi" RTAS call, no check was made if MSI or MSIX is actually supported and the MSI message was reset unconditionally. If this happened on a device which does not support MSI (but does support MSIX, otherwise "ibm,change-msi" would not be called), this device would have PCIDevice::msi_cap field (MSI capability offset) set to zero and writing a vector would actually clear PCI status. This clears MSI message only if MSI or MSIX is present on a device. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08PPC: Cuda: Use cuda timer to expose tbfreq to guestAlexander Graf
Mac OS X calibrates a number of frequencies on bootup based on reading tb values on bootup and comparing them to via cuda timer values. The only variable we can really steer well (thanks to KVM) is the cuda frequency. So let's use that one to fake Mac OS X into believing the bus frequency is tbfreq * 4. That way Mac OS X will automatically calculate the correct timebase frequency. With this patch and the patch set I posted earlier I can successfully run Mac OS X 10.2, 10.3 and 10.4 guests with -M mac99 on TCG and KVM. Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08PPC: Mac: Move tbfreq into local variableAlexander Graf
We already expose the real CPU's tb frequency to the guest via fw_cfg. Soon we will need to also expose it to the MacIO, so let's move it to a variable that we can leverage every time we need the frequency. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08PPC: mac_nvram: Split NVRAM into OF and OSX partsAlexander Graf
Mac OS X (at least with -M mac99) searches for a valid NVRAM partition of a special Apple type. If it can't find that partition in the first half of NVRAM, it will look at the second half. There are a few implications from this. The first is that we need to split NVRAM into 2 halves - one for Open Firmware use, the other one for Mac OS X. Without this split Mac OS X will just loop endlessly over the second half trying to find a partition. The other implication is that we should provide a specially crafted Mac OS X compatible NVRAM partition on the second half that Mac OS X can happily use as it sees fit. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08PPC: mac_nvram: Allow 2 and 4 byte accessesAlexander Graf
The NVRAM in our Core99 machine really supports 2byte and 4byte accesses just as well as 1byte accesses. In fact, Mac OS X uses those. Add support for higher register size granularities. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08PPC: mac_nvram: Remove unused functionsAlexander Graf
The macio_nvram_read and macio_nvram_write functions are never called, just remove them. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08PPC: mac99: Fix core99 timer frequencyAlexander Graf
There is a special timer in the mac99 machine that we recently started to emulate. Unfortunately we emulated it in the wrong frequency. This patch adapts the frequency Mac OS X uses to evaluate results from this timer, making calculations it bases off of it work. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08PPC: KVM: Use vm check_extension for pv hcallAlexander Graf
To find out whether we support the KVM hypercall interface we need to ask KVM on the VM level rather than the global KVM level, because Book3S HV KVM does not support it and we play conservative when both HV and PR are loaded. So instead, use the VM helper that falls back to global KVM enumeration. That should cover all cases. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08KVM: Add helper to run KVM_CHECK_EXTENSION on vm fdAlexander Graf
We now can call KVM_CHECK_EXTENSION on the kvm fd or on the vm fd, whereas the vm version is more accurate when it comes to PPC KVM. Add a helper to make the vm version available that falls back to the non-vm variant if the vm one is not available yet to stay compatible. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08target-ppc: Bug Fix: sradTom Musta
Fix the check for carry in the srad helper to properly construct the mask -- a "1ULL" must be used (instead of "1") in order to get the desired result. Example: R3 8000000000000000 R4 F3511AD4A2CD4C38 srad 3,3,4 Should *not* set XER[CA] but does without this patch. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08target-ppc: Bug Fix: srawiTom Musta
For 64 bit implementations, the special case of a shift by zero should result in the sign extension of the least significant 32 bits of the source GPR (not a direct copy of the 64 bit source GPR). Example: R3 A6212433228F41DC srawi 3,3,0 R3 expected : 00000000228F41DC R3 actual : A6212433228F41DC (without this patch) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08target-ppc: Bug Fix: mulldo OV DetectionTom Musta
Fix the code to properly detect overflow; the 128 bit signed product must have all zeroes or all ones in the first 65 bits otherwise OV should be set. Example: R3 45F086A5D5887509 R4 0000000000000002 mulldo 3,3,4 Should set XER[OV]. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08target-ppc: Bug Fix: mullwTom Musta
For 64-bit implementations, the mullw result is the 64 bit product of the sign-extended least significant 32 bits of the source registers. Fix the code to properly sign extend the source operands and produce a 64 bit product. Example: R3 00000000002F37A0 R4 41C33D242F816715 mullw 3,3,4 R3 expected : 0008C3146AE0F020 R3 actual : 000000006AE0F020 (without this patch) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08target-ppc: Bug Fix: mullwoTom Musta
On 64-bit implementations, the mullwo result is the 64 bit product of the signed 32 bit operands. Fix the implementation to properly deposit the upper 32 bits into the target register. Example: R3 0407DED115077586 R4 53778DF3CA992E09 mullwo 3,3,4 R3 expected : FB9D02730D7735B6 R3 actual : 000000000D7735B6 (without this patch) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08target-ppc: Bug Fix: rlwimiTom Musta
The rlwimi specification includes the ROTL32 operation, which is defined to be a left rotation of two copies of the least significant 32 bits of the source GPR. The current implementation is incorrect on 64-bit implementations in that it rotates a single copy of the least significant 32 bits, padding with zeroes in the most significant bits. Fix the code to properly implement this ROTL32 operation. Also fix the special case of MB=31 and ME=0 to copy the entire contents of the source GPR. Examples: R3 FFFFFFFFFFFFFFF0 rlwimi 3,3,29,14,1 R3 expected : 1FFFFFFE3FFFFFFE R3 actual : 000000003FFFFFFE (without this patch) R3 ED7EB4DD824F0853 rlwimi 3,3,10,31,0 R3 expected : 3C214E09024F0853 R3 actual : 00000000024F0853 (without this patch) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08target-ppc: Bug Fix: rlwnmTom Musta
The rlwnm specification includes the ROTL32 operation, which is defined to be a left rotation of two copies of the least significant 32 bits of the source GPR. The current implementation is incorrect on 64-bit implementations in that it rotates a single copy of the least significant 32 bits, padding with zeroes in the most significant bits. Fix the code to properly implement this ROTL32 operation. Example: R3 = 0000000000000002 R4 = 7FFFFFFFFFFFFFFF rlwnm 3,3,4,31,16 R3 expected : 0000000100000001 R3 actual : 0000000000000001 (without this patch) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08target-ppc: Bug Fix: rlwinmTom Musta
The rlwinm specification includes the ROTL32 operation, which is defined to be a left rotation of two copies of the least significant 32 bits of the source GPR. The current implementation is incorrect on 64-bit implementations in that it rotates a single copy of the least significant 32 bits, padding with zeroes in the most significant bits. Fix the code to properly implement this ROTL32 operation. Example: R3 = F7487D82EC6F75DF rlwinm 3,3,5,12,4 R3 expected : 8DEEBBFD880EBBFD R3 actual : 00000000880EBBFD (without this fix) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08ppc/spapr: Fix MAX_CPUS to 255Nikunj A Dadhania
MAX_CPUS 256 is inconsistent with qemu supporting upto 255 cpus. This MAX_CPUS number was percolated back to "virsh capabilities" with wrong max_cpus. Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08ppc: Add hw breakpoint watchpoint supportBharat Bhushan
This patch adds hardware breakpoint and hardware watchpoint support for ppc. On BOOKE architecture we cannot share debug resources between QEMU and guest because: When QEMU is using debug resources then debug exception must be always enabled. To achieve this we set MSR_DE and also set MSRP_DEP so guest cannot change MSR_DE. When emulating debug resource for guest we want guest to control MSR_DE (enable/disable debug interrupt on need). So above mentioned two configuration cannot be supported at the same time. So the result is that we cannot share debug resources between QEMU and Guest on BOOKE architecture. In the current design QEMU gets priority over guest, this means that if QEMU is using debug resources then guest cannot use them and if guest is using debug resource then qemu can overwrite them. When QEMU is not able to handle debug exception then we inject program exception to guest. Yes program exception NOT debug exception and the reason is: 1) QEMU and guest not sharing debug resources 2) For software breakpoint QEMU uses a ehpriv-1 instruction; So there cannot be any reason that we are in qemu with exit reason KVM_EXIT_DEBUG for guest set debug exception, only possibility is guest executed ehpriv-1 privilege instruction and that's why we are injecting program exception. Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08ppc: Add software breakpoint supportBharat Bhushan
This patch allow insert/remove software breakpoint. When QEMU is not able to handle debug exception then we inject program exception to guest because for software breakpoint QEMU uses a ehpriv-1 instruction; So there cannot be any reason that we are in qemu with exit reason KVM_EXIT_DEBUG for guest set debug exception, only possibility is guest executed ehpriv-1 privilege instruction and that's why we are injecting program exception. Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com> [agraf: make deflect comment booke/book3s agnostic] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08ppc: synchronize excp_vectors for injecting exceptionBharat Bhushan
This patch synchronizes env->excp_vectors[] with env->iovr[]. This is required for using the existing interrupt injection mechanism for kvm. Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08ppc: debug stub: Get trap instruction opcode from KVMBharat Bhushan
Get trap instruction opcode from KVM and this opcode will be used for setting software breakpoint in following patch Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: Locate RTAS and device-tree based on real RMABenjamin Herrenschmidt
We currently calculate the final RTAS and FDT location based on the early estimate of the RMA size, cropped to 256M on KVM since we only know the real RMA size at reset time which happens much later in the boot process. This means the FDT and RTAS end up right below 256M while they could be much higher, using precious RMA space and limiting what the OS bootloader can put there which has proved to be a problem with some OSes (such as when using very large initrd's) Fortunately, we do the actual copy of the device-tree into guest memory much later, during reset, late enough to be able to do it using the final RMA value, we just need to move the calculation to the right place. However, RTAS is still loaded too early, so we change the code to load the tiny blob into qemu memory early on, and then copy it into guest memory at reset time. It's small enough that the memory usage doesn't matter. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [aik: fixed errors from checkpatch.pl, defined RTAS_MAX_ADDR] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [agraf: fix compilation on 32bit hosts] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08loader: Add load_image_size() to replace load_image()Benjamin Herrenschmidt
A subsequent patch to ppc/spapr needs to load the RTAS blob into qemu memory rather than target memory (so it can later be copied into the right spot at machine reset time). I would use load_image() but it is marked deprecated because it doesn't take a buffer size as argument, so let's add load_image_size() that does. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [aik: fixed errors from checkpatch.pl] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: Fix ibm, associativity for memory nodesAlexey Kardashevskiy
We want the associtivity lists of memory and CPU nodes to match but memory nodes have incorrect domain#3 which is zero for CPU so they won't match. This clears domain#3 in the list to match CPUs associtivity lists. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: Add a helper for node0_size calculationAlexey Kardashevskiy
In multiple places there is a node0_size variable calculation which assumes that NUMA node #0 and memory node #0 are the same things which they are not. Since we are going to change it and do not want to change it in multiple places, let's make a helper. This adds a spapr_node0_size() helper and makes use of it. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: Split memory nodes to power-of-two blocksAlexey Kardashevskiy
Linux kernel expects nodes to have power-of-two size and does WARN_ON if this is not the case: [ 0.041456] WARNING: at drivers/base/memory.c:115 which is: === /* Validate blk_sz is a power of 2 and not less than section size */ if ((block_sz & (block_sz - 1)) || (block_sz < MIN_MEMORY_BLOCK_SIZE)) { WARN_ON(1); block_sz = MIN_MEMORY_BLOCK_SIZE; } === This splits memory nodes into set of smaller blocks with a size which is a power of two. This makes sure the start address of every node is aligned to the node size. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [agraf: squash windows compile fix in] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: Refactor spapr_populate_memory() to allow memoryless nodesAlexey Kardashevskiy
Current QEMU does not support memoryless NUMA nodes, however actual hardware may have them so it makes sense to have a way to emulate them in QEMU. This prepares SPAPR for that. This moves 2 calls of spapr_populate_memory_node() into the existing loop over numa nodes so first several nodes may have no memory and this still will work. If there is no numa configuration, the code assumes there is just a single node at 0 and it has all the guest memory. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: Use DT memory node rendering helper for other nodesAlexey Kardashevskiy
This finishes refactoring by using the spapr_populate_memory_node helper for all nodes and removing leftovers from spapr_populate_memory(). This is not a part of the previous patch because the patches look nicer apart. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: Move DT memory node rendering to a helperAlexey Kardashevskiy
This moves recurring bits of code related to memory@xxx nodes creation to a helper. This makes use of the new helper for node@0. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: fix possible memory leakGonglei
get_boot_devices_list() will malloc memory, spapr_finalize_fdt doesn't free it. Signed-off-by: Chenliang <chenliang88@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08PPC: mac99: Move NVRAM to page boundary when necessaryAlexander Graf
When running KVM we have to adhere to host page boundaries for memory slots. Unfortunately the NVRAM on mac99 is a 4k RAM hole inside of an MMIO flash area. So if our host is configured with 64k page size, we can't use the mac99 target with KVM. This is a real shame, as this limitation is not really an issue - we can easily map NVRAM somewhere else and at least Linux and Mac OS X use it at their new location. So in that emergency case when it's about failing to run at all and moving NVRAM to a place it shouldn't be at, choose the latter. This patch enables -M mac99 with KVM on 64k page size hosts. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08spapr: add uuid/host details to device treeNikunj A Dadhania
Useful for identifying the guest/host uniquely within the guest. Adding following properties to the guest root node. vm,uuid - uuid of the guest host-model - Host model number host-serial - Host machine serial number hypervisor type - Tells its "kvm" Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08hw/ppc/spapr_hcall.c: Fix typo in function namesPeter Maydell
Fix a typo in the names of a couple of functions (s/resouce/resource/). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08linux-user: Handle PPC64 ELFv2 Function PointersTom Musta
Function pointers in the 64-bit ELFv2 PowerPC ABI are actual (internal) entry point addresses. However, when invoking a function via a function pointer, GPR 12 must also be set to this address so that the TOC may be handled properly. Add this support to the invocation of a signal handler. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08linux-user: Implement do_setcontext for PPC64Tom Musta
Eliminate the stub for the do_setcontext() function for TARGET_PPC64. The implementation re-uses the existing TARGET_PPC32 code with the only change being the computation of the address of the register save area. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08linux-user: Properly Dereference PPC64 ELFv1 Signal Handler PointerTom Musta
Properly dereference 64-bit PPC ELF V1 ABIT function pointers to signal handlers. On this platform, function pointers are pointers to structures and the first 64 bits of such a structure contains the function's entry point. The second 64 bits contains the TOC pointer, which must be placed into GPR 2. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08linux-user: Enable Signal Handlers on PPC64Tom Musta
Enable the 64-bit PowerPC signal handling code that was previously disabled via #ifdefs. Specifically: - Move the target_mcontext (register save area) structure and append it to the 64-bit target_sigcontext structure. This provides the space on the stack for saving and restoring context. - Define the target_rt_sigframe for 64-bit. - Adjust the setup_frame and setup_rt_frame routines to properly select the target_mcontext area and trampoline within the stack frame; tthis is different for 32-bit and 64-bit implementations. - Adjust the do_setcontext stub for 64-bit so that it compiles without warnings. The 64-bit signal handling code is still not functional after this change; but the 32-bit code is. Subsequent changes will address specific issues with the 64-bit code. Signed-off-by: Tom Musta <tommusta@gmail.com> [agraf: fix build on 32bit hosts, ppc64abi32] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08linux-user: Split PPC Trampoline Encoding from Register SaveTom Musta
Split the encoding of the PowerPC sigreturn trampoline from the saving of register state onto the signal handler stack. This will make it easier in subsequent patches to deal with variations in the stack frame layouts between 32 and 64 bit PowerPC. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08linux-user: Fix Stack Pointer Bug in PPC setup_rt_frameTom Musta
The code that sets the stack frame back pointer is incorrect for the setup_rt_frame() code; qemu will abort (SIGSEGV) in some environments. The setup_frame code was fixed in commit beb526b12134a6b6744125deec5a7fe24a8f92e3 but the setup_rt_frame code was not. Make the setup_rt_frame code consistent with the setup_frame code. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08ppc: spapr-rtas - implement os-term rtas callNikunj A Dadhania
PAPR compliant guest calls this in absence of kdump. This finally reaches the guest and can be handled according to the policies set by higher level tools(like taking dump) for further analysis by tools like crash. Linux kernel calls ibm,os-term when extended property of os-term is set. This makes sure that a return to the linux kernel is gauranteed. Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> [agraf: reduce RTAS_TOKEN_MAX] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08PPC: KVM: Fix g3beige and mac99 when HV is loadedAlexander Graf
On PPC we have 2 different styles of KVM: PR and HV. HV can only virtualize sPAPR guests while PR can virtualize everything that's reasonably close to the host hardware platform. As long as only one kernel module (PR or HV) is loaded, the "default" kvm type is the module that's loaded. So if your hardware only supports PR mode you can easily spawn a Mac VM. However, if both HV and PR are loaded we default to HV mode. And in that case the Mac machines have to explicitly ask for PR mode to get a working VM. Fix this up by explicitly having the Mac machines ask for PR style KVM. This fixes bootup of Mac VMs on systems where bot HV and PR kvm modules are loaded for me. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-02Merge remote-tracking branch 'remotes/spice/tags/pull-spice-20140902-1' into ↵Peter Maydell
staging sanity check for qxl, minor spice display channel tweak. # gpg: Signature made Tue 02 Sep 2014 09:53:39 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/spice/tags/pull-spice-20140902-1: spice: use console index as display id qxl-render: add more sanity checks Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-27 00:32:18 +0000