aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-03qmp qemu-ga: Fix qemu-ga not to accept "control"Markus Armbruster
Commit cf869d53172 "qmp: support out-of-band (oob) execution" accidentally made qemu-ga accept and ignore "control". Fix that. Out-of-band execution in a monitor that doesn't support it now fails with {"error": {"class": "GenericError", "desc": "QMP input member 'control' is unexpected"}} instead of {"error": {"class": "GenericError", "desc": "Please enable out-of-band first for the session during capabilities negotiation"}} The old description is suboptimal when out-of-band cannot not be enabled, or the command doesn't support out-of-band execution. The new description is a bit unspecific, but it'll do. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-12-armbru@redhat.com>
2018-07-03tests/test-qga: Demonstrate the guest-agent ignores "control"Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-11-armbru@redhat.com>
2018-07-03qmp qemu-ga: Revert change that accidentally made qemu-ga accept "id"Markus Armbruster
Commit cf869d53172 "qmp: support out-of-band (oob) execution" changed how we check "id": Note that in the patch I exported qmp_dispatch_check_obj() to be used to check the request earlier, and at the same time allowed "id" field to be there since actually we always allow that. The part after "and" is ill-advised: it makes qemu-ga accept and ignore "id". Revert. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-10-armbru@redhat.com>
2018-07-03tests/test-qga: Demonstrate the guest-agent ignores "id"Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-9-armbru@redhat.com>
2018-07-03qmp: Make "id" optional again even in "oob" monitorsMarkus Armbruster
Commit cf869d53172 "qmp: support out-of-band (oob) execution" made "id" mandatory for all commands when the client accepted capability "oob". This is rather onerous when you play with QMP by hand, and unnecessarily so: only out-of-band commands need an ID for reliable matching of response to command. Revert that part of commit cf869d53172 for now, but have documentation advise on the need to use "id" with out-of-band commands. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703085358.13941-8-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-07-03tests/qmp-test: Test in-band command doesn't overtakeMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-7-armbru@redhat.com>
2018-07-03qmp: Get rid of x-oob-test commandMarkus Armbruster
tests/qmp-test tests an out-of-band command overtaking a slow in-band command. To do that, it needs: 1. An in-band command that *reliably* takes long enough to be overtaken. 2. An out-of-band command to do the overtaking. 3. To avoid delays, a way to make the in-band command complete quickly after it was overtaken. To satisfy these needs, commit 469638f9cb3 provides the rather peculiar oob-capable QMP command x-oob-test: * With "lock": true, it waits for a global semaphore. * With "lock": false, it signals the global semaphore. To satisfy 1., the test runs x-oob-test in-band with "lock": true. To satisfy 2. and 3., it runs x-oob-test out-of-band with "lock": false. Note that waiting for a semaphore violates the rules for oob-capable commands. Running x-oob-test with "lock": true hangs the monitor until you run x-oob-test with "lock": false on another monitor (which you might not have set up). Having an externally visible QMP command that may hang the monitor is not nice. Let's apply a little more ingenuity to the problem. Idea: have an existing command block on reading a FIFO special file, unblock it by opening the FIFO for writing. For 1., use {"execute": "blockdev-add", "id": ID1, "arguments": { "driver": "blkdebug", "node-name": ID1, "config": FIFO, "image": { "driver": "null-co"}}} where ID1 is an arbitrary string, and FIFO is the name of the FIFO. For 2., use {"execute": "migrate-pause", "id": ID2, "control": {"run-oob": true}} where ID2 is a different arbitrary string. Since there's no migration to pause, the command will fail, but that's fine; instant failure is still a test of out-of-band responses overtaking in-band commands. For 3., open FIFO for writing. Drop QMP command x-oob-test. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-6-armbru@redhat.com> [Error checking tweaked]
2018-07-03qmp: Document COMMAND_DROPPED design flawMarkus Armbruster
Events are broadcast to all monitors. If another monitor's client has a command with the same ID in flight, the event will incorrectly claim that command was dropped. This must be fixed before out-of-band execution can graduate from "experimental". Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-5-armbru@redhat.com>
2018-07-03docs/interop/qmp: Improve OOB documentationMarkus Armbruster
OOB documentation is spread over qmp-spec.txt sections 2.2.1 Capabilities and 2.3 Issuing Commands. The amount of detail is a bit distracting there. Move the meat of the matter to new section 2.3.1 Out of band execution. Throw in a few other improvements while there: * 2.2 Server Greeting: Drop advice to search entire capabilities array; should be obvious. * 3. QMP Examples - 3.1 Server Greeting: Update greeting to the one we expect for the release. Now shows capability "oob". Update qmp-intro.txt likewise. - 3.2 Capabilities negotiation: Show client accepting capability "oob". - 3.7 Out-of-band execution: New. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-4-armbru@redhat.com> [Whitespace tidied up]
2018-07-03qga: removing bios_supports_modeDaniel Henrique Barboza
bios_support_mode verifies if the guest has support for a certain suspend mode but it doesn't inform back which suspend tool provides it. The caller, guest_suspend, executes all suspend strategies in order again. After adding systemd suspend support, bios_support_mode now will verify for support for systemd, then pmutils, then Linux sys state file. In a worst case scenario where both systemd and pmutils isn't supported but Linux sys state is: - bios_supports_mode will check for systemd, then pmutils, then Linux sys state. It will tell guest_suspend that there is support, but it will not tell who provides it; - guest_suspend will try to execute (and fail) systemd suspend, then pmutils suspend, to only then use the Linux sys suspend. The time spent executing systemd and pmutils suspend was wasted and could be avoided, but only bios_support_mode knew it but didn't inform it back. A quicker approach is to nuke bios_supports_mode and control whether we found support at all with a bool flag inside guest_suspend. guest_suspend will search for suspend support and execute it as soon as possible. If the a given suspend mechanism fails, continue to the next. If no suspend support is found, the "not supported" message is still being sent back to the user. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-03qga: systemd hibernate/suspend/hybrid-sleep supportDaniel Henrique Barboza
pmutils isn't being supported by newer OSes like Fedora 27 or Mint. This means that the only suspend option QGA offers for these guests are writing directly into the Linux sys state file. This also means that QGA also loses the ability to do hybrid suspend in those guests - this suspend mode is only available when using pmutils. Newer guests can use systemd facilities to do all the suspend types QGA supports. The mapping in comparison with pmutils is: - pm-hibernate -> systemctl hibernate - pm-suspend -> systemctl suspend - pm-suspend-hybrid -> systemctl hybrid-sleep To discover whether systemd supports these functions, we inspect the status of the services that implements them. With this patch, we can offer hybrid suspend again for newer guests that do not have pmutils support anymore. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-03qga: removing switch statements, adding run_process_childDaniel Henrique Barboza
This is a cleanup of the resulting code after detaching pmutils and Linux sys state file logic: - remove the SUSPEND_MODE_* macros and use an enumeration instead. At the same time, drop the switch statements at the start of each function and use the enumeration index to get the right binary/argument; - create a new function called run_process_child(). This function uses g_spawn_sync() to execute a shell command, returning the exit code. This is a common operation in the pmutils functions and will be used in the systemd implementation as well, so this function will avoid code repetition. There are more places inside commands-posix.c where this new run_process_child function can also be used, but one step at a time. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> *check/propagate local_err before setting errp directly Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-03qga: guest_suspend: decoupling pm-utils and sys logicDaniel Henrique Barboza
Following the same logic of the previous patch, let's also decouple the suspend logic from guest_suspend into specialized functions, one for each strategy we support at this moment. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-03qga: bios_supports_mode: decoupling pm-utils and sys logicDaniel Henrique Barboza
In bios_supports_mode there is a verification to assert if the chosen suspend mode is supported by the pmutils tools and, if not, we see if the Linux sys state files supports it. This verification is done in the same function, one after the other, and it works for now. But, when adding a new suspend mechanism that will not necessarily follow the same return 0 or 1 logic of pmutils, this code will be hard to deal with. This patch decouple the two existing logics into their own functions, pmutils_supports_mode and linux_sys_state_supports_mode, which in turn are used inside bios_support_mode. The existing logic is kept but now it's easier to extend it. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-03qga: refactoring qmp_guest_suspend_* functionsDaniel Henrique Barboza
To be able to add new suspend mechanisms we need to detach the existing QMP functions from the current implementation specifics. At this moment we have functions such as qmp_guest_suspend_ram calling bios_suspend_mode and guest_suspend passing the pmutils command and arguments as parameters. This patch removes this logic from the QMP functions, moving them to the respective functions that will have to deal with which binary to use. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-03qemu-ga: make get-fsinfo work over pci bridgesMarc-André Lureau
Iterate over the PCI bridges to lookup the PCI device associated with the block device. This allows to lookup the driver under the following syspath: /sys/devices/pci0000:00/0000:00:02.2/0000:03:00.0/virtio2/block/vda/vda3 It also works with an "old-style" Q35 libvirt hierarchy: root complex -> DMI-PCI bridge -> PCI-PCI bridge -> virtio controller, ex: /sys/devices/pci0000:00/0000:00:03.0/0000:01:01.0/0000:02:01.0/virtio1/block/vda/vda3 The setup can be reproduced with the following qemu command line (Thanks Marcel for help): qemu-system-x86_64 -M q35 \ -device i82801b11-bridge,id=dmi2pci_bridge,bus=pcie.0 -device pci-bridge,id=pci_bridge,bus=dmi2pci_bridge,addr=0x1,chassis_nr=1 -device virtio-blk-pci,scsi=off,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1,bus=pci_bridge,addr=0x1 For consistency with other syspath-related debug messages, replace a \"%s\" in the message with '%s'. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1567041 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-03qga-win: Fixing msi upgrade disallow in WiX fileBishara AbuHattoum
Issue: When upgrading qemu-ga using the msi from an old version to a newer one, the upgrade is not allowed by the msi showing this error message "Another version of this product is already installed." BZ# 1536331: https://bugzilla.redhat.com/show_bug.cgi?id=1536331 Fix: For the upgrade to be allowed by the msi the WiX file must provide three things: 1. Changing product's Id. (assigning it to "*") 2. Constant product's UpgradeId. (exists) 3. Changing version. (exists) Reference: http://wixtoolset.org/documentation/manual/v3/howtos/updates/major_upgrade.html Signed-off-by: Bishara AbuHattoum <bishara@daynix.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-03qga/schema: fix documentation for GuestOSInfoTomáš Golembiovský
The documentation for kernel-version and kernel-release on Windows was swapped. Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-03test-qga: add trivial tests for some commandsTomáš Golembiovský
These commands did not get their tests in the original commits: - guest-get-host-name - guest-get-timezone - guest-get-users Trivial tests that mostly only call the commands were added. Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> * replace QDECREF() with qobject_unref() Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-03Merge remote-tracking branch 'remotes/kraxel/tags/vga-20180703-pull-request' ↵Peter Maydell
into staging vga: disable global_vmstate, virtio-gpu scanout tracking fixes. # gpg: Signature made Tue 03 Jul 2018 10:44:56 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20180703-pull-request: vga: disable global_vmstate for 3.0+ machine types virtio-gpu: disable scanout when backing resource is destroyed virtio-gpu: update old resource too. virtio-gpu: tweak scanout disable. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/display/qxl.c # hw/display/vga-isa-mm.c
2018-07-03Merge remote-tracking branch 'remotes/kraxel/tags/ui-20180703-pull-request' ↵Peter Maydell
into staging ui: drop libdrm dependency. # gpg: Signature made Tue 03 Jul 2018 10:18:36 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/ui-20180703-pull-request: ui: do not build-depend or link with libdrm, it is not needed Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-03qapi: add conditions to SPICE type/commands/events on the schemaMarc-André Lureau
Add #if defined(CONFIG_SPICE) in generated code, and adjust the qmp/hmp code accordingly. query-qmp-schema no longer reports the command/events etc as available when disabled at compile time. Commands made conditional: * query-spice Before the patch, the command for !CONFIG_SPICE is unregistered. It will fail with the same error. Events made conditional: * SPICE_CONNECTED, SPICE_INITIALIZED, SPICE_DISCONNECTED, SPICE_MIGRATE_COMPLETED Add TODO for conditional SPICE chardevs, delayed until the supports for conditional members lands. No HMP change, the code was already conditional. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-15-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03qapi: add conditions to VNC type/commands/events on the schemaMarc-André Lureau
Add #if defined(CONFIG_VNC) in generated code, and adjust the qmp/hmp code accordingly. query-qmp-schema no longer reports the command/events etc as available when disabled at compile. Commands made conditional: * query-vnc, query-vnc-servers, change-vnc-password Before the patch, the commands for !CONFIG_VNC are stubs that fail like this: {"error": {"class": "GenericError", "desc": "The feature 'vnc' is not enabled"}} Afterwards, they fail like this: {"error": {"class": "CommandNotFound", "desc": "The command FOO has not been found"}} I call that an improvement, because it lets clients distinguish between command unavailable (class CommandNotFound) and command failed (class GenericError). Events made conditional: * VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED HMP change: * info vnc Will return "unknown command: 'info vnc'" when VNC is compiled out (same as error for spice when --disable-spice) Occurrences of VNC (case insensitive) in the schema that aren't covered by this change: * add_client Command has other uses, including "socket bases character devices". These are unconditional as far as I can tell. * set_password, expire_password In theory, these commands could be used for managing any service's password. In practice, they're used for VNC and SPICE services. They're documented for "remote display session" / "remote display server". The service is selected by argument @protocol. The code special-cases protocol-specific argument checking, then calls a protocol-specific function to do the work. If it fails, the command fails with "Could not set password". It does when the service isn't compiled in (it's a stub then). We could make these commands conditional on the conjunction of all services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)], but I doubt it's worthwhile. * change Command has other uses, namely changing media. This patch inlines a stub; no functional change. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03qapi: add 'If:' section to generated documentationMarc-André Lureau
The documentation is generated only once, and doesn't know C pre-conditions. Add 'If:' sections for top-level entities. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-13-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03qapi-types: add #if conditions to types & visitorsMarkus Armbruster
Types & visitors are coupled and must be handled together to avoid temporary build regression. Wrap generated types/visitor code with #if/#endif using the context helpers. Derived from a patch by Marc-André. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-12-marcandre.lureau@redhat.com>
2018-07-03qapi/events: add #if conditions to eventsMarc-André Lureau
Wrap generated code with #if/#endif using an 'ifcontext' on QAPIGenCSnippet objects. This makes a conditional event's qapi_event_send_FOO() compile-time conditional, but its enum QAPIEvent member remains unconditional for now. A follow up patch "qapi-event: add 'if' condition to implicit event enum" will improve this. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-11-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03qapi/commands: add #if conditions to commandsMarc-André Lureau
Wrap generated code with #if/#endif using an 'ifcontext' on QAPIGenCSnippet objects. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180703155648.11933-10-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Line breaks tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03qapi-introspect: add preprocessor conditions to generated QLitMarc-André Lureau
This commit adds 'ifcond' conditions to top-level QLit objects. Future work will add them to object and enum type members, i.e. within QLit objects. Extend the QLit generator to_qlit() to accept (@obj, @cond) tuples in addition to just @obj. The tuple causes the QLit generated for objects for @obj with #if/#endif conditions for @cond. See generated tests/test-qmp-introspect.c. Example diff after this patch: --- before 2018-01-08 11:55:24.757083654 +0100 +++ tests/test-qmp-introspect.c 2018-01-08 13:08:44.477641629 +0100 @@ -51,6 +51,8 @@ { "name", QLIT_QSTR("EVENT_F"), }, {} })), +#if defined(TEST_IF_CMD) +#if defined(TEST_IF_STRUCT) QLIT_QDICT(((QLitDictEntry[]) { { "arg-type", QLIT_QSTR("5"), }, { "meta-type", QLIT_QSTR("command"), }, @@ -58,12 +60,16 @@ { "ret-type", QLIT_QSTR("0"), }, {} })), +#endif /* defined(TEST_IF_STRUCT) */ +#endif /* defined(TEST_IF_CMD) */ Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-9-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03qapi-introspect: modify to_qlit() to append ',' on level > 0Marc-André Lureau
The following patch is going to break list entries with #if/#endif, so they should have the trailing ',' as suffix. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-8-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03qapi: add #if/#endif helpersMarc-André Lureau
Add helpers to wrap generated code with #if/#endif lines. A later patch wants to use QAPIGen for generating C snippets rather than full C files with copyright headers etc. Splice in class QAPIGenCCode between QAPIGen and QAPIGenC. Add a 'with' statement context manager that will be used to wrap generator visitor methods. The manager will check if code was generated before adding #if/#endif lines on QAPIGenCSnippet objects. Used in the following patches. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180703155648.11933-7-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03qapi: mcgen() shouldn't indent # linesMarc-André Lureau
Skip preprocessor lines when adding indentation, since that would likely result in invalid code. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-6-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03qapi: add 'ifcond' to visitor methodsMarc-André Lureau
Modify the test visitor to check correct passing of values. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-5-marcandre.lureau@redhat.com> [Accidental change to roms/seabios dropped] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03qapi: leave the ifcond attribute undefined until check()Marc-André Lureau
We commonly initialize attributes to None in .init(), then set their real value in .check(). Accessing the attribute before .check() yields None. If we're lucky, the code that accesses the attribute prematurely chokes on None. It won't for .ifcond, because None is a legitimate value. Leave the ifcond attribute undefined until check(). Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-4-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03qapi: pass 'if' condition into QAPISchemaEntity objectsMarc-André Lureau
Built-in objects remain unconditional. Explicitly defined objects use the condition specified in the schema. Implicitly defined objects inherit their condition from their users. For most of them, there is exactly one user, so the condition to use is obvious. The exception is wrapped types generated for simple union variants, which can be shared by any number of simple unions. The tight condition would be the disjunction of the conditions of these simple unions. For now, use the wrapped type's condition instead. Much simpler and good enough for now. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-3-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03qga-win: add driver path usage to GuestFilesystemInfoChen Hanxiao
This patch adds support for getting the usage of windows driver path. The usage of fs stored as used_bytes and total_bytes. Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-03qga: add mountpoint usage info to GuestFilesystemInfoChen Hanxiao
This patch adds support for getting the usage of mounted filesystem. The usage of fs stored as used_bytes and total_bytes. It's very useful when we try to monitor guest's filesystem. Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Cc: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-03qapi: add 'if' to top-level expressionsMarc-André Lureau
Accept 'if' key in top-level elements, accepted as string or list of string type. The following patches will modify the test visitor to check the value is correctly saved, and generate #if/#endif code (as a single #if/endif line or a series for a list). Example of 'if' key: { 'struct': 'TestIfStruct', 'data': { 'foo': 'int' }, 'if': 'defined(TEST_IF_STRUCT)' } The generated code is for now *unconditional*. Later patches generate the conditionals. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-2-marcandre.lureau@redhat.com> [Commit message and Documentation improved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03Merge remote-tracking branch 'remotes/kraxel/tags/usb-20180703-pull-request' ↵Peter Maydell
into staging usb: bugfixes for ehci and xhci. # gpg: Signature made Tue 03 Jul 2018 09:26:20 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/usb-20180703-pull-request: xhci: fix guest-triggerable assert ehci: Don't fetch a NULL current qtd but advance the queue instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-03qga: check bytes count read by guest-file-readPrasad J Pandit
While reading file content via 'guest-file-read' command, 'qmp_guest_file_read' routine allocates buffer of count+1 bytes. It could overflow for large values of 'count'. Add check to avoid it. Reported-by: Fakhri Zulkifli <mohdfakhrizulkifli@gmail.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Cc: qemu-stable@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-03qga: unset frozen state if no mount points are frozenChen Hanxiao
If we set mountpoints to qmp_guest_fsfreeze_freeze_list, we may got nothing to freeze as all mountpoints are not valid. So call ga_unset_frozen in this senario. Also, if we return 0 frozen fs, there is no need to call guest-fsfreeze-thaw. Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-03Merge remote-tracking branch 'remotes/shorne/tags/pull-or-20180703' into stagingPeter Maydell
OpenRISC cleanups and Fixes for QEMU 3.0 Mostly patches from Richard Henderson fixing multiple things: * Fix singlestepping in GDB. * Use more TB linking. * Fixes to exit TB after updating SPRs to enable registering of state changes. * Significant optimizations and refactors to the TLB * Split out disassembly from translation. * Add qemu-or1k to qemu-binfmt-conf.sh. * Implement signal handling for linux-user. Then there are a few fixups from me: * Fix delay slot detections to match hardware, this was masking a bug in the linus kernel. * Fix stores to the PIC mask register # gpg: Signature made Tue 03 Jul 2018 14:44:10 BST # gpg: using RSA key C3B31C2D5E6627E4 # gpg: Good signature from "Stafford Horne <shorne@gmail.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4 * remotes/shorne/tags/pull-or-20180703: (25 commits) target/openrisc: Fix writes to interrupt mask register target/openrisc: Fix delay slot exception flag to match spec linux-user: Fix struct sigaltstack for openrisc linux-user: Implement signals for openrisc target/openrisc: Add support in scripts/qemu-binfmt-conf.sh target/openrisc: Reorg tlb lookup target/openrisc: Increase the TLB size target/openrisc: Stub out handle_mmu_fault for softmmu target/openrisc: Use identical sizes for ITLB and DTLB target/openrisc: Fix cpu_mmu_index target/openrisc: Fix tlb flushing in mtspr target/openrisc: Reduce tlb to a single dimension target/openrisc: Merge mmu_helper.c into mmu.c target/openrisc: Remove indirect function calls for mmu target/openrisc: Merge tlb allocation into CPUOpenRISCState target/openrisc: Form the spr index from tcg target/openrisc: Exit the TB after l.mtspr target/openrisc: Split out is_user target/openrisc: Link more translation blocks target/openrisc: Fix singlestep_enabled ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-03linux-user/strace: Improve recvmsg() outputPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-By: Guido Günther <agx@sigxcpu.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180628034652.24152-7-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-07-03linux-user/strace: Improve capget()/capset() outputPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-By: Guido Günther <agx@sigxcpu.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180628034652.24152-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-07-03Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180703' ↵Peter Maydell
into staging ppc patch queue 2018-07-03 Here's a last minue pull request before today's soft freeze. Ideally I would have sent this earlier, but I was waiting for a couple of extra fixes I knew were close. And the freeze crept up on me, like always. Most of the changes here are bugfixes in any case. There are some cleanups as well, which have been in my staging tree for a little while. There are a couple of truly new features (some extensions to the sam460ex platform), but these are low risk, since they only affect a new and not really stabilized machine type anyway. Higlights are: * Mac platform improvements from Mark Cave-Ayland * Sam460ex improvements from BALATON Zoltan et al. * XICS interrupt handler cleanups from Cédric Le Goater * TCG improvements for atomic loads and stores from Richard Henderson * Assorted other bugfixes # gpg: Signature made Tue 03 Jul 2018 06:55:22 BST # gpg: using RSA key 6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-3.0-20180703: (35 commits) ppc: Include vga cirrus card into the compiling process target/ppc: Relax reserved bitmask of indexed store instructions target/ppc: set is_jmp on ppc_tr_breakpoint_check spapr: compute default value of "hpt-max-page-size" later target/ppc/kvm: don't pass cpu to kvm_get_smmu_info() target/ppc/kvm: get rid of kvm_get_fallback_smmu_info() ppc440_uc: Basic emulation of PPC440 DMA controller sam460ex: Add RTC device hw/timer: Add basic M41T80 emulation ppc4xx_i2c: Rewrite to model hardware more closely hw/ppc: Give sam46ex its own config option fpu_helper.c: fix setting FPSCR[FI] bit target/ppc: Implement the rest of gen_st_atomic target/ppc: Implement the rest of gen_ld_atomic target/ppc: Use atomic min/max helpers target/ppc: Use MO_ALIGN for EXIWX and ECOWX target/ppc: Split out gen_st_atomic target/ppc: Split out gen_ld_atomic target/ppc: Split out gen_load_locked target/ppc: Tidy gen_conditional_store ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/ppc/spapr.c
2018-07-03target/openrisc: Fix writes to interrupt mask registerStafford Horne
The interrupt controller mask register (PICMR) allows writing any value to any of the 32 interrupt mask bits. Writing a 0 masks the interrupt writing a 1 unmasks (enables) the the interrupt. For some reason the old code was or'ing the write values to the PICMR meaning it was not possible to ever mask a interrupt once it was enabled. I have tested this by running linux 4.18 and my regular checks, I don't see any issues. Reported-by: Davidson Francis <davidsondfgl@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Fix delay slot exception flag to match specStafford Horne
The delay slot exception flag is only set on the SR register during exception. Previously it was being set on both the ESR and SR this caused QEMU to differ from the spec. The was apparent as the linux kernel had a bug where it could boot on QEMU but not on real hardware. The fixed logic now matches hardware. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03linux-user: Fix struct sigaltstack for openriscRichard Henderson
Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03linux-user: Implement signals for openriscRichard Henderson
All of the existing code was boilerplate from elsewhere, and would crash the guest upon the first signal. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com> --- v2: Add a comment to the new definition of target_pt_regs. Install the signal mask into the ucontext. v3: Incorporate feedback from Laurent.
2018-07-03target/openrisc: Add support in scripts/qemu-binfmt-conf.shRichard Henderson
Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Reorg tlb lookupRichard Henderson
While openrisc has a split i/d tlb, qemu does not. Perform a lookup on both i & d tlbs in parallel and put the composite rights into qemu's tlb. This avoids ping-ponging the qemu tlb between EXEC and READ. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 20:21:10 +0000