| Age | Commit message (Collapse) | Author |
|---|
|
If the fifo has 0 bytes, and the read is of size 1, the call to
fifo8_push_all() will copy off boundary data.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
|
|
ivshmem_read() only reads sizeof(long) from the input buffer. Accepting
more could lead to fifo8 abort() on 32bit systems if fifo is not empty.
A following patch will change the protocol to 64-bit little-endian
instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
|
|
ivshmem is going to use MSIX state conditionally.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
|
|
If a chardev is allowed to be created outside of QMP, then it must be
also possible to free it. This is useful for ivshmem that creates
chardev anonymously and must be able to free them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
|
|
Note that it launches two instances, as sharing memory is the purpose of
ivshmem.
Cc: Cam Macdonell <cam@cs.ualberta.ca>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[ Remove Nahanni codename, add test to pci set - Marc-André ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
|
|
ivshmem doesn't actually require kvm, so enable it when POSIX is
enabled. (it is required however when ioeventfd is enabled)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
|
|
staging
X86 queue, 2015-10-23
# gpg: Signature made Fri 23 Oct 2015 16:30:58 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
* remotes/ehabkost/tags/x86-pull-request:
vl: trivial: minor tweaks to a max-cpu error msg
target-i386: Use 1UL for bit shift
target-i386: Add DE to TCG_FEATURES
target-i386: Ensure always-1 bits on DR6 can't be cleared
target-i386: Check CR4[DE] for processing DR4/DR5
target-i386: Handle I/O breakpoints
target-i386: Optimize setting dr[0-3]
target-i386: Move hw_*breakpoint_* functions
target-i386: Ensure bit 10 on DR7 is never cleared
target-i386: Re-introduce optimal breakpoint removal
target-i386: Introduce cpu_x86_update_dr7
target-i386: Disable cache info passthrough by default
target-i386: allow any alignment for SMBASE
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Andrew Jones <drjones@redhat.com>
|
|
Fix undefined behavior detected by clang runtime check:
qemu/target-i386/cpu.c:1494:15: runtime error:
left shift of 1 by 31 places cannot be represented in type 'int'
While doing that, add extra parenthesis for clarity.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Now DE is supported by TCG so it can be enabled in CPUID bits.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Bits 4-11 and 16-31 on DR6 are documented as always 1, so ensure they
can't be cleared by software.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Introduce helper_get_dr so that we don't have to put CR4[DE]
into the scarce HFLAGS resource. At the same time, rename
helper_movl_drN_T0 to helper_set_dr and set the helper flags.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
If the debug register is not enabled, we need
do nothing besides update the register.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
They're only used from bpt_helper.c now.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Bit 10 of DR7 is documented as always set to 1, so ensure that's
always the case.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Before the last patch, we had an efficient loop that disabled
local breakpoints on task switch. Re-add that, but in a more
general way that handles changes to the global enable bits too.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
This moves the last of the iteration over breakpoints into
the bpt_helper.c file. This also allows us to make several
breakpoint functions static.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
The host cache information may not make sense for the guest if the VM
CPU topology doesn't match the host CPU topology. To make sure we won't
expose broken cache information to the guest, disable cache info
passthrough by default, and add a new "host-cache-info" property that
can be used to enable the old behavior for users that really need it.
Cc: Benoît Canet <benoit@irqsave.net>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Processors up to the Pentium (says Bochs---I do not have old enough
manuals) require a 32KiB alignment for the SMBASE, but newer processors
do not need that, and Tiano Core will use non-aligned SMBASE values.
Reported-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
into staging
qemu-ga patch queue
* unbreak qga-test unit test on travis-ci systems by not assuming a
disk-based filesystem must be present
# gpg: Signature made Fri 23 Oct 2015 15:01:47 BST using RSA key ID F108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg: aka "Michael Roth <mdroth@utexas.edu>"
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>"
* remotes/mdroth/tags/qga-pull-2015-10-23-tag:
tests: test-qga, loosen assumptions about host filesystems
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
QGA skips pseudo-filesystems when querying filesystems via
guest-get-fsinfo. On some hosts, such as travis-ci which uses
containers with simfs filesystems, QGA might not report *any*
filesystems. Our test case assumes there would be at least one,
leading to false error messages in these situations.
Instead, sanity-check values iff we get at least one filesystem.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
staging
ppc patch queue - 2015-10-23
sPAPR highlights:
* Allow VFIO devices on the spapr-pci-host-bridge
* Allow virtio VGA
* Safer handling of HTAB allocation
* ibm,pa-features device tree property
non-sPAPR highlights:
* Categorization of many ppc specific devices in help output
* Tweaks to MMU type constants
# gpg: Signature made Fri 23 Oct 2015 07:27:56 BST using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-next-20151023: (21 commits)
prep: do not use CPU_LOG_IOPORT, convert to tracepoints
openpic: add to misc category
macio-nvram: add to misc category
macio: add to bridge category
uninorth: add to bridge category
macio-ide: add to storage category
cuda: add to bridge category
grackle: add to bridge category
escc: add to input category
cmd646: add to storage category
adb: add to input category
ppc/spapr: Add "ibm,pa-features" property to the device-tree
ppc: Add mmu_model defines for arch 2.03 and 2.07
hw/scsi/spapr_vscsi: Remove superfluous memset
spapr_pci: Allow VFIO devices to work on the normal PCI host bridge
spapr_iommu: Provide a function to switch a TCE table to allowing VFIO
spapr_iommu: Rename vfio_accel parameter
spapr_pci: Allow PCI host bridge DMA window to be configured
spapr: Add "slb-size" property to CPU device tree nodes
spapr: Abort when HTAB of requested size isn't allocated
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/berrange/tags/qcrypto-fixes-pull-20151022-2' into staging
Merge qcrypto-fixes 2015/10/22
# gpg: Signature made Thu 22 Oct 2015 19:03:45 BST using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
* remotes/berrange/tags/qcrypto-fixes-pull-20151022-2:
configure: avoid polluting global CFLAGS with tasn1 flags
crypto: add sanity checking of plaintext/ciphertext length
crypto: don't let builtin aes crash if no IV is provided
crypto: allow use of nettle/gcrypt to be selected explicitly
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
vhost: build fix
Fix build breakages when using older gcc.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 22 Oct 2015 20:36:07 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
vhost-user: fix up rhel6 build
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
These messages are disabled by default; a perfect usecase for tracepoints.
Convert them over.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
openpic is a programmable interrupt controller, so
add it to the misc category.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The macio nvram is a non volatile RAM, so add it
the misc category.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
macio is a bridge between the PCI bus and the Mac nvram,
IDE controller and PIC, so add it to the bridge category.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Uninorth is the mac99 PCI host controller, so add
it to the bridge category.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
macio-ide is an IDE controller, so add it
to the storage category.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Cuda is a bridge between PowerMac system bus and the ADB controller,
real-time clock, pram and the power management unit.
So add it to the bridge category.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Grackle is the PCI host controller of oldworld powermac,
so add it to the bridge category.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
ESCC is a serial port controller, so add it
to the input category.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
cmd646 is an IDE controller, so add it to the
storage category.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The Apple Desktop Bus is used to connect a keyboard and a mouse,
so add it to the input category.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
LoPAPR defines a "ibm,pa-features" per-CPU device tree property which
describes extended features of the Processor Architecture.
This adds the property to the device tree. At the moment this is the
copy of what pHyp advertises except "I=1 (cache inhibited) Large Pages"
which is enabled for TCG and disabled when running under HV KVM host
with 4K system page size.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[aik: rebased, changed commit log, moved ci_large_pages initialization,
renamed pa_features arrays]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
This removes unused POWERPC_MMU_2_06a/POWERPC_MMU_2_06d.
This replaces POWERPC_MMU_64B with POWERPC_MMU_2_03 for POWER5+ to be
more explicit about the version of the PowerISA supported.
This defines POWERPC_MMU_2_07 and uses it for the POWER8 CPU family.
This will not have an immediate effect now but it will in the following
patch.
This should cause no behavioural change.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[aik: rebased, changed commit log]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
g_malloc0 already clears the memory, so no need for
the additional memset here.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The core VFIO infrastructure more or less allows VFIO devices to work
on any normal guest PCI host bridge (PHB) without extra logic.
However, the "spapr-pci-host-bridge" device (as opposed to the special
"spapr-pci-vfio-host-bridge" device) breaks this by using a partially
KVM accelerated implementation of the guest kernel IOMMU which won't
work with VFIO devices, without additional kernel support.
This patch allows VFIO devices to work on the spapr-pci-host-bridge,
by having it switch off KVM TCE acceleration when a VFIO device is
added to the PHB (either on startup, or by hotplug).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
|
|
Because of the way non-VFIO guest IOMMU operations are KVM accelerated, not
all TCE tables (guest IOMMU contexts) can support VFIO devices. Currently,
this is decided at creation time.
To support hotplug of VFIO devices, we need to allow a TCE table which
previously didn't allow VFIO devices to be switched so that it can. This
patch adds an spapr_tce_set_need_vfio() function to do this, by
reallocating the table in userspace if necessary.
Currently this doesn't allow the KVM acceleration to be re-enabled if all
the VFIO devices are removed. That's an optimization for another time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
|
|
The vfio_accel parameter used when creating a new TCE table (guest IOMMU
context) has a confusing name. What it really means is whether we need the
TCE table created to be able to support VFIO devices.
VFIO is relevant, because when available we use in-kernel acceleration of
the TCE table, but that may not work with VFIO devices because updates to
the table are handled in kernel, bypass qemu and so don't hit qemu's
infrastructure for keeping the VFIO host IOMMU state in sync with the guest
IOMMU state.
Rename the parameter to "need_vfio" throughout. This is a cosmetic change,
with no impact on the logic.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
|
|
At present the PCI host bridge (PHB) for the pseries machine type has a
fixed DMA window from 0..1GB (in PCI address space) which is mapped to real
memory via the PAPR paravirtualized IOMMU.
For better support of VFIO devices, we're going to want to allow for
different configurations of the DMA window.
Eventually we'll want to allow the guest itself to reconfigure the window
via the PAPR dynamic DMA window interface, but as a preliminary this patch
allows the user to reconfigure the window with new properties on the PHB
device.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
|
|
According to a commit message in the Linux kernel (see here
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=b60c31d85a2a
for example), the name of the property that carries the information
about the number of SLB entries should be called "slb-size", and
not "ibm,slb-size". The Linux kernel can deal with both names, but
to be on the safe side we should support the official name, too.
[Now that LoPAPR is public, the relevant requirement can be found in
section C.6.1.8 --dwg]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Terminate the guest when HTAB of requested size isn't allocated by
the host.
When memory hotplug is attempted on a guest that has booted with
less than requested HTAB size, the guest kernel will not be able
to gracefully fail the hotplug request. This patch will ensure that
we never end up in a situation where memory hotplug fails due to
less than requested HTAB size.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Allocate HTAB from ppc_spapr_init() so that we can abort the guest
if requested HTAB size is't allocated by the host. However retain the
htab reset call in spapr_reset_htab() so that HTAB gets reset (and
not allocated) during machine reset.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Build on RHEL6 fails:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=42875
Apparently unnamed unions couldn't use C99 named field initializers.
Let's just name the payload union field.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The previous commit
commit 9a2fd4347c40321f5cbb4ab4220e759fcbf87d03
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Apr 13 14:01:39 2015 +0100
crypto: add sanity checking of TLS x509 credentials
defined new variables $TEST_LIBS and $TEST_CFLAGS and
used them in tests/Makefile to augment $LIBS and $CFLAGS.
Unfortunately this overlooks the fact that tests/Makefile
is not executed via recursive-make, it is just pulled into
the top level Makefile via an include statement. So rather
than just augmenting the compiler/linker flags for tests
it polluted the global flags.
This is thought to be behind a reported failure when
building the pixman module as a sub-module, since global
$CFLAGS are passed down to configure in pixman.
This change removes the $TEST_LIBS and $TEST_CFLAGS
replacing them with $TASN1_LIBS and $TASN1_CFLAGS,
setting only against specific objects/executables
that need them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
|
|
When encrypting/decrypting data, the plaintext/ciphertext
buffers are required to be a multiple of the cipher block
size. If this is not done, nettle will abort and gcrypt
will report an error. To get consistent behaviour add
explicit checks upfront for the buffer sizes.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
|
|
If no IV is provided, then use a default IV of all-zeros
instead of crashing. This gives parity with gcrypt and
nettle backends.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
|
