aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-05-22qcow2: remove qcow2_cache_find_entry_to_replace()Alberto Garcia
A cache miss means that the whole array was traversed and the entry we were looking for was not found, so there's no need to traverse it again in order to select an entry to replace. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-05-22qcow2: use an LRU algorithm to replace entries from the L2 cacheAlberto Garcia
The current algorithm to evict entries from the cache gives always preference to those in the lowest positions. As the size of the cache increases, the chances of the later elements of being removed decrease exponentially. In a scenario with random I/O and lots of cache misses, entries in positions 8 and higher are rarely (if ever) evicted. This can be seen even with the default cache size, but with larger caches the problem becomes more obvious. Using an LRU algorithm makes the chances of being removed from the cache independent from the position. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-05-22qcow2: simplify qcow2_cache_put() and qcow2_cache_entry_mark_dirty()Alberto Garcia
Since all tables are now stored together, it is possible to obtain the position of a particular table directly from its address, so the operation becomes O(1). Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-05-22qcow2: use one single memory block for the L2/refcount cache tablesAlberto Garcia
The qcow2 L2/refcount cache contains one separate table for each cache entry. Doing one allocation per table adds unnecessary overhead and it also requires us to store the address of each table separately. Since the size of the cache is constant during its lifetime, it's better to have an array that contains all the tables using one single allocation. In my tests measuring freshly created caches with sizes 128MB (L2) and 32MB (refcount) this uses around 10MB of RAM less. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-05-22vmdk: Fix overflow if l1_size is 0x20000000Fam Zheng
Richard Jones caught this bug with afl fuzzer. In fact, that's the only possible value to overflow (extent->l1_size = 0x20000000) l1_size: l1_size = extent->l1_size * sizeof(long) => 0x80000000; g_try_malloc returns NULL because l1_size is interpreted as negative during type casting from 'int' to 'gsize', which yields a enormous value. Hence, by coincidence, we get a "not too bad" behavior: qemu-img: Could not open '/tmp/afl6.img': Could not open '/tmp/afl6.img': Cannot allocate memory Values larger than 0x20000000 will be refused by the validation in vmdk_add_extent. Values smaller than 0x20000000 will not overflow l1_size. Cc: qemu-stable@nongnu.org Reported-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-05-22vmdk: Fix next_cluster_sector for compressed writeFam Zheng
This fixes the bug introduced by commit c6ac36e (vmdk: Optimize cluster allocation). Sometimes, write_len could be larger than cluster size, because it contains both data and marker. We must advance next_cluster_sector in this case, otherwise the image gets corrupted. Cc: qemu-stable@nongnu.org Reported-by: Antoni Villalonga <qemu-list@friki.cat> Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-05-22nvme: support NVME_VOLATILE_WRITE_CACHE featureChristoph Hellwig
The SCSI emulation in the Linux NVMe driver really wants to know if a device has a volatile write cache. Given that qemu has moved away from a model where we report the backing store WCE bit to one where the WCE bit is supposed to be part of the migratable guest-visible state we always return 1 here. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-05-22qcow2: Flush pending discards before allocating clusterKevin Wolf
Before a freed cluster can be reused, pending discards for this cluster must be processed. The original assumption was that this was not a problem because discards are only cached during discard/write zeroes operations, which are synchronous so that no concurrent write requests can cause cluster allocations. However, the discard/write zeroes operation itself can allocate a new L2 table (and it has to in order to put zero flags there), so make sure we can cope with the situation. This fixes https://bugs.launchpad.net/bugs/1349972. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-05-22Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Fri May 22 10:00:53 2015 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: (38 commits) block: get_block_status: use "else" when testing the opposite condition qemu-iotests: Test unaligned sub-block zero write block: Fix NULL deference for unaligned write if qiov is NULL Revert "block: Fix unaligned zero write" block: align bounce buffers to page block: minimal bounce buffer alignment block: return EPERM on writes or discards to read-only devices configure: Add workaround for ccache and clang configure: silence glib unknown attribute __alloc_size__ configure: factor out supported flag check configure: handle clang -nopie argument warning block/parallels: improve image writing performance further block/parallels: optimize linear image expansion block/parallels: add prealloc-mode and prealloc-size open paramemets block/parallels: delay writing to BAT till bdrv_co_flush_to_os block/parallels: create bat_entry_off helper block/parallels: improve image reading performance iotests, parallels: check for incorrectly closed image in tests block/parallels: implement incorrect close detection block/parallels: implement parallels_check method of block driver ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-22Revert "target-alpha: Add vector implementation for CMPBGE"Peter Maydell
This reverts commit 32ad48abd74a997220b841e4e913edeb267aa362. Unfortunately the SSE2 code here fails to compile on some versions of gcc: target-alpha/int_helper.c:77:24: error: invalid operands to binary >= (have '__vector(16) unsigned char' and '__vector(16) unsigned char') Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-22Merge remote-tracking branch 'remotes/rth/tags/pull-axp-20150521' into stagingPeter Maydell
Rewrite fp exceptions # gpg: Signature made Thu May 21 18:35:52 2015 BST using RSA key ID 4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" * remotes/rth/tags/pull-axp-20150521: target-alpha: Add vector implementation for CMPBGE target-alpha: Rewrite helper_zapnot target-alpha: Raise IOV from CVTQL target-alpha: Suppress underflow from CVTTQ if DNZ target-alpha: Raise EXC_M_INV properly for fp inputs target-alpha: Disallow literal operand to 1C.30 to 1C.37 target-alpha: Implement WH64EN target-alpha: Fix integer overflow checking insns target-alpha: Fix cvttq vs inf target-alpha: Fix cvttq vs large integers target-alpha: Raise IOV from CVTTQ target-alpha: Set EXC_M_SWC for exceptions from /S insns target-alpha: Set fpcr_exc_status even for disabled exceptions target-alpha: Tidy FPCR representation target-alpha: Set PC correctly for floating-point exceptions target-alpha: Forget installed round mode after MT_FPCR target-alpha: Rename floating-point subroutines target-alpha: Move VAX helpers to a new file Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-22block: get_block_status: use "else" when testing the opposite conditionPaolo Bonzini
A bit of Boolean algebra (and common sense) tells us that the second "if" here is looking for blocks that are not allocated. This is the opposite of the "if" that sets BDRV_BLOCK_ALLOCATED, and thus it can use an "else". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1431599702-10431-1-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22qemu-iotests: Test unaligned sub-block zero writeFam Zheng
Test zero write in byte range 512~1024 for 4k alignment. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1431522721-3266-4-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block: Fix NULL deference for unaligned write if qiov is NULLFam Zheng
For zero write, callers pass in NULL qiov (qemu-io "write -z" or scsi-disk "write same"). Commit fc3959e466 fixed bdrv_co_write_zeroes which is the common case for this bug, but it still exists in bdrv_aio_write_zeroes. A simpler fix would be in bdrv_co_do_pwritev which is the NULL dereference point and covers both cases. So don't access it in bdrv_co_do_pwritev in this case, use three aligned writes. [Initialize ret to 0 in bdrv_co_do_zero_pwritev() to avoid uninitialized variable warning with gcc 4.9.2. --Stefan] Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1431522721-3266-3-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22Revert "block: Fix unaligned zero write"Fam Zheng
This reverts commit fc3959e4669a1c2149b91ccb05101cfc7ae1fc05. The core write code already handles the case, so remove this duplication. Because commit 61007b316 moved the touched code from block.c to block/io.c, the change is manually reverted. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1431522721-3266-2-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block: align bounce buffers to pageDenis V. Lunev
The following sequence int fd = open(argv[1], O_RDWR | O_CREAT | O_DIRECT, 0644); for (i = 0; i < 100000; i++) write(fd, buf, 4096); performs 5% better if buf is aligned to 4096 bytes. The difference is quite reliable. On the other hand we do not want at the moment to enforce bounce buffering if guest request is aligned to 512 bytes. The patch changes default bounce buffer optimal alignment to MAX(page size, 4k). 4k is chosen as maximal known sector size on real HDD. The justification of the performance improve is quite interesting. From the kernel point of view each request to the disk was split by two. This could be seen by blktrace like this: 9,0 11 1 0.000000000 11151 Q WS 312737792 + 1023 [qemu-img] 9,0 11 2 0.000007938 11151 Q WS 312738815 + 8 [qemu-img] 9,0 11 3 0.000030735 11151 Q WS 312738823 + 1016 [qemu-img] 9,0 11 4 0.000032482 11151 Q WS 312739839 + 8 [qemu-img] 9,0 11 5 0.000041379 11151 Q WS 312739847 + 1016 [qemu-img] 9,0 11 6 0.000042818 11151 Q WS 312740863 + 8 [qemu-img] 9,0 11 7 0.000051236 11151 Q WS 312740871 + 1017 [qemu-img] 9,0 5 1 0.169071519 11151 Q WS 312741888 + 1023 [qemu-img] After the patch the pattern becomes normal: 9,0 6 1 0.000000000 12422 Q WS 314834944 + 1024 [qemu-img] 9,0 6 2 0.000038527 12422 Q WS 314835968 + 1024 [qemu-img] 9,0 6 3 0.000072849 12422 Q WS 314836992 + 1024 [qemu-img] 9,0 6 4 0.000106276 12422 Q WS 314838016 + 1024 [qemu-img] and the amount of requests sent to disk (could be calculated counting number of lines in the output of blktrace) is reduced about 2 times. Both qemu-img and qemu-io are affected while qemu-kvm is not. The guest does his job well and real requests comes properly aligned (to page). Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1431441056-26198-3-git-send-email-den@openvz.org CC: Paolo Bonzini <pbonzini@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block: minimal bounce buffer alignmentDenis V. Lunev
The patch introduces new concept: minimal memory alignment for bounce buffers. Original so called "optimal" value is actually minimal required value for aligment. It should be used for validation that the IOVec is properly aligned and bounce buffer is not required. Though, from the performance point of view, it would be better if bounce buffer or IOVec allocated by QEMU will be aligned stricter. The patch does not change any alignment value yet. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1431441056-26198-2-git-send-email-den@openvz.org CC: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block: return EPERM on writes or discards to read-only devicesPaolo Bonzini
This is the behavior in the operating system, for example Linux's blkdev_write_iter has the following: if (bdev_read_only(I_BDEV(bd_inode))) return -EPERM; This does not apply to opening a device for read/write, when the device only supports read-only operation. In this case any of EACCES, EPERM or EROFS is acceptable depending on why writing is not possible. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1431013548-22492-1-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22configure: Add workaround for ccache and clangJohn Snow
Test if ccache is interfering with semantic analysis of macros, disable its habit of trying to compile already pre-processed versions of code if so. ccache attempts to save time by compiling pre-processed versions of code, but this disturbs clang's static analysis enough to produce false positives. ccache allows us to disable this feature, opting instead to compile the original version instead of its preprocessed version. This makes ccache much slower for cache misses, but at least it becomes usable with QEMU/clang. This workaround only activates for users using ccache AND clang, and only if their configuration is observed to be producing warnings. You may need to clear your ccache for builds started without -Werror, as those may continue to produce warnings from the cache. Thanks to Peter Eisentraut for his writeup on the issue: http://peter.eisentraut.org/blog/2014/12/01/ccache-and-clang-part-3/ Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1427324259-1481-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22configure: silence glib unknown attribute __alloc_size__John Snow
The glib headers use GCC attributes. Unfortunately the __GNUC__ and __GNUC_MINOR__ version macros are also defined by clang, but clang doesn't support the same attributes as GCC. clang 3.5.0 does not support the __alloc_size__ attribute: https://github.com/llvm-mirror/clang/commit/c047507a9a79e89fc8339e074fa72822a7e7ea73 The following warning is produced: gstrfuncs.h:257:44: warning: unknown attribute '__alloc_size__' ignored [-Wunknown-attributes] G_GNUC_MALLOC G_GNUC_ALLOC_SIZE(2); gmacros.h:67:45: note: expanded from macro 'G_GNUC_ALLOC_SIZE' #define G_GNUC_ALLOC_SIZE(x) __attribute__((__alloc_size__(x))) This patch checks whether glib headers cause warnings and disables -Wunknown-attributes if it is able to. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1427324259-1481-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22configure: factor out supported flag checkJohn Snow
Factor out the function that checks if a compiler flag is supported or not. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1427324259-1481-3-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22configure: handle clang -nopie argument warningStefan Hajnoczi
gcc 4.9.2 treats -nopie as an error: cc: error: unrecognized command line option ‘-nopie’ clang 3.5.0 treats -nopie as a warning: clang: warning: argument unused during compilation: '-nopie' The causes ./configure to fail with clang: ERROR: configure test passed without -Werror but failed with -Werror. Make the -nopie test use -Werror so that compile_prog works for both gcc and clang. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1427324259-1481-2-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: improve image writing performance furtherDenis V. Lunev
Try to perform IO for the biggest continuous block possible. All blocks abscent in the image are accounted in the same type and preallocation is made for all of them at once. The performance for sequential write is increased from 200 Mb/sec to 235 Mb/sec on my SSD HDD. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-28-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: optimize linear image expansionDenis V. Lunev
Plain image expansion spends a lot of time to update image file size. This seriously affects the performance. The following simple test qemu_img create -f parallels -o cluster_size=64k ./1.hds 64G qemu_io -n -c "write -P 0x11 0 1024M" ./1.hds could be improved if the format driver will pre-allocate some space in the image file with a reasonable chunk. This patch preallocates 128 Mb using bdrv_write_zeroes, which should normally use fallocate() call inside. Fallback to older truncate() could be used as a fallback using image open options thanks to the previous patch. The benefit is around 15%. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Karan <rkagan@parallels.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-27-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: add prealloc-mode and prealloc-size open paramemetsDenis V. Lunev
This is preparational commit for tweaks in Parallels image expansion. The idea is that enlarge via truncate by one data block is slow. It would be much better to use fallocate via bdrv_write_zeroes and expand by some significant amount at once. Original idea with sequential file writing to the end of the file without fallocate/truncate would be slower than this approach if the image is expanded with several operations: - each image expanding means file metadata update, i.e. filesystem journal write. Truncate/write to newly truncated space update file metadata twice thus truncate removal helps. With fallocate call inside bdrv_write_zeroes file metadata is updated only once and this should happen infrequently thus this approach is the best one for the image expansion - tail writes are ordered, i.e. the guest IO queue could not be sent immediately to the host introducing additional IO delays This patch just adds proper parameters into BDRVParallelsState and performs options parsing in parallels_open. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-26-git-send-email-den@openvz.org CC: Roman Kagan <rkagan@parallels.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: delay writing to BAT till bdrv_co_flush_to_osDenis V. Lunev
The idea is that we do not need to immediately sync BAT to the image as from the guest point of view there is a possibility that IO is lost even in the physical controller until flush command was finished. bdrv_co_flush_to_os is exactly the right place for this purpose. Technically the patch uses loaded BAT data as a cache and performs actual on-disk metadata updates in parallels_co_flush_to_os callback. This patch speed ups qemu-img create -f parallels -o cluster_size=64k ./1.hds 64G qemu-io -f parallels -c "write -P 0x11 0 1024k" 1.hds writing from 50-60 Mb/sec to 80-90 Mb/sec on rotational media and from 160 Mb/sec to 190 Mb/sec on SSD disk. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-25-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: create bat_entry_off helperDenis V. Lunev
calculate offset of the BAT entry in the image file. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-24-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: improve image reading performanceDenis V. Lunev
Try to perform IO for the biggest continuous block possible. The performance for sequential read is increased from 220 Mb/sec to 360 Mb/sec for continous image on my SSD HDD. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-23-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22iotests, parallels: check for incorrectly closed image in testsDenis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-22-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: implement incorrect close detectionDenis V. Lunev
The software driver must set inuse field in Parallels header to 0x746F6E59 when the image is opened in read-write mode. The presence of this magic in the header on open forces image consistency check. There is an unfortunate trick here. We can not check for inuse in parallels_check as this will happen too late. It is possible to do that for simple check, but during the fix this would always report an error as the image was opened in BDRV_O_RDWR mode. Thus we save the flag in BDRVParallelsState for this. On the other hand, nothing should be done to clear inuse in parallels_check. Generic close will do the job right. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-21-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: implement parallels_check method of block driverDenis V. Lunev
The check is very simple at the moment. It calculates necessary stats and fix only the following errors: - space leak at the end of the image. This would happens due to preallocation - clusters outside the image are zeroed. Nothing else could be done here Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-20-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: move parallels_open/probe to the very end of the fileDenis V. Lunev
This will help to avoid forward declarations for upcoming parallels_check Some very obvious formatting fixes were made to the moved code to make checkpatch happy. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-19-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: read parallels image header and BAT into single bufferDenis V. Lunev
This metadata cache would allow to properly batch BAT updates to disk in next patches. These updates will be properly aligned to avoid read-modify-write transactions on block level. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-18-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: keep BAT bitmap data in little endian in memoryDenis V. Lunev
This will allow to use this data as buffer to BAT update directly without any intermediate buffers. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-17-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: create bat2sect helperDenis V. Lunev
deduplicate copy/paste arithmetcs Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-16-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: rename catalog_ names to bat_Denis V. Lunev
BAT means 'block allocation table'. Thus this name is clean and shorter on writing. Some obvious formatting fixes in the old code were made to make checkpatch happy. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-15-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22parallels: change copyright information in the image headerDenis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-14-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22iotests, parallels: test for newly created parallels image via qemu-imgDenis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-13-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: support parallels image creationDenis V. Lunev
Do not even care to create WithoutFreeSpace image, it is obsolete. Always create WithouFreSpacExt one. The code also does not spend a lot of efforts to fill cylinders and heads fields, they are not used actually in a real life neither in QEMU nor in Parallels products. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-12-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22iotests, parallels: test for write into Parallels imageDenis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-11-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: _co_writev callback for Parallels formatDenis V. Lunev
Support write on Parallels images. The code is almost the same as one in the previous patch implemented scatter-gather IO for read. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-10-git-send-email-den@openvz.org CC: Roman Kagan <rkagan@parallels.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: mark parallels format driver as zero initedDenis V. Lunev
From the guest point of view unallocated blocks are zeroed. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-9-git-send-email-den@openvz.org CC: Roman Kagan <rkagan@parallels.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: replace magic constants 4, 64 with proper sizeofsDenis V. Lunev
simple purification.. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-8-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: provide _co_readv routine for parallels format driverDenis V. Lunev
Main approach is taken from qcow2_co_readv. The patch drops coroutine lock for the duration of IO operation and peforms normal scatter-gather IO using standard QEMU backend. The patch also adds comment about locking considerations in the driver. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-7-git-send-email-den@openvz.org CC: Roman Kagan <rkagan@parallels.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: add get_block_statusRoman Kagan
Implement VFS method for get_block_status to Parallels format driver. qemu_co_mutex_lock is not necessary yet (the driver is read-only) but will be necessary very soon when write will be supported. Signed-off-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Denis V. Lunev <den@openvz.org> Message-id: 1430207220-24458-6-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: read up to cluster end in one goRoman Kagan
Teach parallels_read() to do reads in coarser granularity than just a single sector: if requested, read up to the cluster end in one go. Signed-off-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1430207220-24458-5-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: switch to bdrv_readRoman Kagan
Switch the .bdrv_read method implementation from using bdrv_pread() to bdrv_read() on the underlying file, since the latter is subject to i/o throttling while the former is not. Besides, since bdrv_read() operates in sectors rather than bytes, adjust the helper functions to do so too. Signed-off-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Denis V. Lunev <den@openvz.org> Message-id: 1430207220-24458-4-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22block/parallels: rename parallels_header to ParallelsHeaderDenis V. Lunev
this follows QEMU coding convention Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1430207220-24458-3-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22iotests, parallels: quote TEST_IMG in 076 test to be path-safeDenis V. Lunev
suggested by Jeff Cody Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1430207220-24458-2-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-21target-alpha: Add vector implementation for CMPBGERichard Henderson
While conditionalized on SSE2, it's a "portable" gcc generic vector implementation, which could be enabled on other hosts. Signed-off-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-30 07:49:28 +0000