aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-06Merge remote branch 'kwolf/for-anthony' into stagingAnthony Liguori
2010-07-06ramblocks: No more being lazy about duplicate namesAlex Williamson
Now that we have a working qemu_ram_free() and the primary runtime user of it has been updated, don't be lenient about duplicate id strings. We also shouldn't need to create them ondemand at the target. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06pci: Free the space allocated for the option rom on removalAlex Williamson
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06qemu_ram_free: Implement itAlex Williamson
Now that we can support a ram_addr_t space with holes, we can implement qemu_ram_free(). Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06savevm: Create a new continue flag to avoid resending block nameAlex Williamson
Allows us to compress the protocol a bit by setting a flag on the offset which indicates we're still working within the same block as last time. That way we can avoid sending the block name for every page. Suggested by Anthony Liguori. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06savevm: Use RAM blocks for basis of migrationAlex Williamson
We don't want to assume a contiguous address space, so migrate based on RAM blocks instead of a fixed linear address map. This will allow us to have holes in the ram_addr_t namespace, so we can implement qemu_ram_free(). Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06savevm: Migrate RAM based on name/offsetAlex Williamson
Synchronize RAM blocks with the target and migrate using name/offset pairs. This ensures both source and target have the same view of RAM and that we get the right bits into the right slot. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06ramblocks: Make use of DeviceState pointer and BusInfo.get_dev_pathAlex Williamson
With these two pieces in place, we can start naming ramblocks. When the device is present and it lives on a bus that provides a device path, we concatenate the path and the provided name. Otherwise we just use name. The resulting id string must be unique. For now we assume an allocation for the same name and size is a device that has been removed and reinserted and return the same block. This will go away once qemu_ram_free() is implemented. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06qemu_ram_alloc: Add DeviceState and name parametersAlex Williamson
These will be used to generate unique id strings for ramblocks. The name field is required, the device pointer is optional as most callers don't have a device. When there's no device or the device isn't a child of a bus implementing BusInfo.get_dev_path, the name should be unique for the platform. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06virtio-net: Incorporate a DeviceState pointer and let savevm track instancesAlex Williamson
Stuff a pointer to the DeviceState into the VirtIONet structure so that we can easily remove the vmstate entry later. Also, let vmstate track the instance number (it should always be zero internally since the device path should now be unique). Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06eepro100: Add a dev field to eeprom new/free functionsAlex Williamson
This allows us to create a more meaningful savevm string. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06savevm: Make use of DeviceStateAlex Williamson
For callers that pass a device we can traverse up the qdev tree and make use of the BusInfo.get_dev_path information for creating unique savevm id strings. This avoids needing to rely on the instance number, which can cause problems with device initialization order and hotplug. For compatibility, we also store away the old id string and instance so we can accept migrations from VMs as we add new get_dev_path implementations. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06savevm: Add DeviceState paramAlex Williamson
When available, we'd like to be able to access the DeviceState when registering a savevm. For buses with a get_dev_path() function, this will allow us to create more unique savevm id strings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06pci: Implement BusInfo.get_dev_path()Alex Williamson
This works great for PCI since a <segment>:<bus>:<dev>.<fn> uniquely describes a global address. No need to traverse up the qdev tree. PCI segment support is a placeholder for compatibility once we support multiple segments. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06qdev: Add a get_dev_path() function to BusInfoAlex Williamson
This function is meant to provide a stable device path for buses which are able to implement it. If a bus has a globally unique addresses scheme, one address level may be sufficient to provide a path. Other buses may need to recursively traverse up the qdev tree. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06pc: Allocate all ram in a single qemu_ram_alloc()Alex Williamson
This will benefit us when we migrate based on ramblock name since we won't be bouncing between separate blocks. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06Remove uses of ram.last_offset (aka last_ram_offset)Alex Williamson
We currently need this either to allocate the next ram_addr_t for a new block, or for total memory to be migrated. Both of which we can calculate without need of this to keep us in a contiguous address space. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06make rtc alatm workGleb Natapov
Convert alarm time from BCD if needed before comparing with current time. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06scsi: Fix SCSI bus resetJan Kiszka
When the controller raises the SCSI reset line, we have to perform the requested reset on all disks attached to the controller's bus. Moreover, reset is edge triggered, so avoid repeating it if the line was already high. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06Fix io-thread build breakage of a88790a14fJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06block: add sheepdog driver for distributed storage supportMORITA Kazutaka
Sheepdog is a distributed storage system for QEMU. It provides highly available block level storage volumes to VMs like Amazon EBS. This patch adds a qemu block driver for Sheepdog. Sheepdog features are: - No node in the cluster is special (no metadata node, no control node, etc) - Linear scalability in performance and capacity - No single point of failure - Autonomous management (zero configuration) - Useful volume management support such as snapshot and cloning - Thin provisioning - Autonomous load balancing The more details are available at the project site: http://www.osrg.net/sheepdog/ Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06ide: Reject invalid CHS geometryMarkus Armbruster
drive_init() doesn't permit invalid CHS for if=ide, but that's worthless: we get it via if=none and -device. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06ide: Reject readonly drives unless CD-ROMMarkus Armbruster
drive_init() doesn't permit option readonly for if=ide, but that's worthless: we get it via if=none and -device. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06ide: Make ide_init_drive() return successMarkus Armbruster
It still always succeeds. The next commits will add failures. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06ide: Replace IDEState members is_cdrom, is_cf by drive_kindMarkus Armbruster
The two aren't independent variables. Make that obvious. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06ide: Improve error messagesMarkus Armbruster
Use error_report(), because it points to the error location. Reword "tried to assign twice" messages to make it clear that we're complaining about the unit property. Report invalid unit property instead of failing silently. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06scsi: Error locations for -drive if=scsi device initializationMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06error: New qemu_opts_loc_restore()Markus Armbruster
Needed for decent error locations when complaining about options outside of qemu_opts_foreach(). That one sets the location already. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06scsi: Reject unimplemented error actionsMarkus Armbruster
drive_init() doesn't permit rerror for if=scsi, but that's worthless: we get it via if=none and -device. Moreover, scsi-generic doesn't support werror. Since drive_init() doesn't catch that, option werror was silently ignored even with if=scsi. Wart: unlike drive_init(), we don't reject the default action when it's explicitly specified. That's because we can't distinguish "no rerror option" from "rerror=report", or "no werror" from "rerror=enospc". Left for another day. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06qdev: Don't hw_error() in qdev_init_nofail()Markus Armbruster
Some of the failures are internal errors, and hw_error() is okay then. But the common way to fail is bad user input, e.g. -global isa-fdc.driveA=foo where drive foo has an unsupported rerror value. exit(1) instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06fdc: Reject unimplemented error actionsMarkus Armbruster
drive_init() doesn't permit them for if=floppy, but that's worthless: we get them via if=none and -global. This can make device initialization fail. Since all callers of fdctrl_init_isa() ignore its value, change it to die instead of returning failure. Without this, some callers would ignore the failure, and others would crash. Wart: unlike drive_init(), we don't reject the default action when it's explicitly specified. That's because we can't distinguish "no rerror option" from "rerror=report", or "no werror" from "rerror=enospc". Left for another day. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06raw-posix: Fix test for host CD-ROMMarkus Armbruster
raw_pread_aligned() retries up to two times if the block device backs a virtual CD-ROM (a drive with media=cdrom and if=ide, scsi, xen or none). This makes no sense. Whether retrying reads can correct read errors can only depend on what we're reading, not on how the result gets used. We need to check what whether we're reading from a physical CD-ROM or floppy here. I doubt retrying is useful even then. Left for another day. Impact: * Virtual CD-ROM backed by host_cdrom behaves the same. * Virtual CD-ROM backed by file or host_device no longer retries. * A drive backed by host_cdrom now retries even if it's not a virtual CD-ROM. * Any drive backed by host_floppy now retries. While there, clean up gratuitous use of goto. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06block migration: Fix test for read-only driveMarkus Armbruster
init_blk_migration_it() skips drives with type hint BDRV_TYPE_CDROM. The intention is to skip read-only drives. However, BDRV_TYPE_CDROM is only a hint. It is currently sufficent for read-only. But it's not necessary, and it may not remain sufficient. Use bdrv_is_read_only() instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06blockdev: Clean up how readonly persists across virtual media changeMarkus Armbruster
Since commit cb4e5f8e, monitor command change makes the new media readonly iff the type hint is BDRV_TYPE_CDROM, i.e. the drive was created with media=cdrom. The intention is to avoid changing a block device's read-only-ness. However, BDRV_TYPE_CDROM is only a hint. It is currently sufficent for read-only. But it's not necessary, and it may not remain sufficient. Use bdrv_is_read_only() instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06Add virtio disk identification supportjohn cooper
This patch adds the final missing bits for support of passing a serial/id string to a virtio-blk guest driver. The guest-side component already exists in the virtio driver, and has recently been reworked by Ryan to export a /sys interface for retrieval of the id from guest userland. Signed-off-by: john cooper <john.cooper@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06qcow2/vdi: Change check to distinguish error casesKevin Wolf
This distinguishes between harmless leaks and real corruption. Hopefully users better understand what qemu-img check wants to tell them. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06qemu-img check: Distinguish different kinds of errorsKevin Wolf
People think that their images are corrupted when in fact there are just some leaked clusters. Differentiating several error cases should make the messages more comprehensible. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06Include sys/mman.h before qemu-options.hJes Sorensen
The result of parsing qemu-options.def depends on whehter or not MAP_POPULATE is defined, so make sure to include sys/mman.h before including qemu-options.h. Reported by Frank Arnold. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06Merge remote branch 'kwolf/for-anthony' into stagingAnthony Liguori
2010-07-06Merge remote branch 'qmp/for-anthony' into stagingAnthony Liguori
2010-07-05cris: Avoid debug clobbering for both I & D MMU state.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@axis.com>
2010-07-05cris: Dont clobber the MMU state across calls to cpu_get_phys_page_debug.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-05cris: Break out rand LFSR update into a separate func.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@axis.com>
2010-07-03piix4: compile only onceBlue Swirl
Compile piix4 in hwlib. Two compilations less for the full build. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-03remove exec-all.h inclusion from cpu.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-03move cpu_pc_from_tb to target-*/exec.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-03remove unused stuff from */exec.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-02block: Handle multiwrite errors only when all requests have completedKevin Wolf
Don't try to be clever by freeing all temporary data and calling all callbacks when the return value (an error) is certain. Doing so has at least two important problems: * The temporary data that is freed (qiov, possibly zero buffer) is still used by the requests that have not yet completed. * Calling the callbacks for all requests in the multiwrite means for the caller that it may free buffers etc. which are still in use. Just remember the error value and do the cleanup when all requests have completed. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02block: Fix early failure in multiwriteKevin Wolf
bdrv_aio_writev may call the callback immediately (and it will commonly do so in error cases). Current code doesn't consider this. For details see the comment added by this patch. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02qemu-img: avoid calling exit(1) to release resources properlyMORITA Kazutaka
This patch removes exit(1) from error(), and properly releases resources such as a block driver and an allocated memory. For testing the Sheepdog block driver with qemu-iotests, it is necessary to call bdrv_delete() before the program exits. Because the driver releases the lock of VM images in the close handler. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 06:27:53 +0000