aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-12-09net: Update netdev peer on link changeVlad Yasevich
When a link change occurs on a backend (like tap), we currently do not propage such change to the nic. As a result, when someone turns off a link on a tap device, for instance, then a guest doesn't see that change and continues to try to send traffic or run DHCP even though the lower-layer is disconnected. This is OK when the network is set up as a HUB since the the guest may be connected to other HUB ports too, but when it's set up as a netdev, it makes thinkgs worse. The patch addresses this by setting the peers link down only when the peer is not a HUBPORT device. With this patch, in the following config -netdev tap,id=net0 -device e1000,mac=XXXXX,netdev=net0 when net0 link is turned off, the guest e1000 shows lower-layer link down. This allows guests to boot much faster in such configurations. With windows guest, it also allows the network to recover properly since windows will not configure the link-local IPv4 address, and when the link is turned on, the proper address address is configured. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-09virtio-net: don't update mac_table in error stateAmos Kong
mac_table was always cleaned up first in handling VIRTIO_NET_CTRL_MAC_TABLE_SET command, and we din't recover mac_table content in error state, it's not correct. This patch makes all the changes in temporal variables, only update the real mac_table if everything is ok. We won't change mac_table in error state, so rxfilter notification isn't needed. This patch also fixed same problame in http://lists.nongnu.org/archive/html/qemu-devel/2013-11/msg01188.html (not merge) I will send patch for virtio spec to clarifying this change. Signed-off-by: Amos Kong <akong@redhat.com> Reviewed-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-09MAINTAINERS: Add netmap maintainersVincenzo Maffione
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-09net: Adding netmap network backendVincenzo Maffione
This patch adds support for a network backend based on netmap. netmap is a framework for high speed packet I/O. You can use it to build extremely fast traffic generators, monitors, software switches or network middleboxes. Its companion software switch VALE lets you interconnect virtual machines. netmap and VALE are implemented as a non-intrusive kernel module, support NICs from multiple vendors, are part of standard FreeBSD distributions and available in source format for Linux too. To compile QEMU with netmap support, use the following configure options: ./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys where "/path/to/netmap" contains the netmap source code, available at http://info.iet.unipi.it/~luigi/netmap/ The same webpage contains more information about the netmap project (together with papers and presentations). Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-08target-cris: Use new qemu_ld/st opcodesRichard Henderson
Using the new opcodes we can reduce if/else trees to a single statement. Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-12-07Merge remote-tracking branch 'awilliam/tags/vfio-pci-for-qemu-20131206.0' ↵Anthony Liguori
into staging vfio-pci updates include: - Update linux-headers to include KVM-VFIO device support - Enable QEMU support for KVM-VFIO device - Additional Nvidia x-vga quirk to ACK MSI interrupts - Debug options to disable MSI/X KVM acceleration - Fix to cleanup MSI-X vectors on shutdown and avoid IRQ route leaks The KVM-VFIO device support enables KVM to manage how it handles coherency instructions in the presence of non-coherent I/O. Dave Airlie had noted that the Nvidia MSI ACK support here may just be scratching the surface, but it's better than what we have now and it's only enabled via the x-vga option, so I'm willing to add since it does enable some users. # gpg: Signature made Fri 06 Dec 2013 12:28:19 PM PST using RSA key ID 3BB08B22 # gpg: Can't check signature: public key not found # By Alex Williamson # Via Alex Williamson * awilliam/tags/vfio-pci-for-qemu-20131206.0: vfio-pci: Release all MSI-X vectors when disabled vfio-pci: Add debug config options to disable MSI/X KVM support vfio-pci: Fix Nvidia MSI ACK through 0x88000 quirk vfio-pci: Make use of new KVM-VFIO device linux-headers: Update from v3.13-rc3 Message-id: 20131206204715.16731.12627.stgit@bling.home Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-07Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori
# By Paolo Bonzini (17) and others # Via Stefan Hajnoczi * stefanha/block: (48 commits) qemu-iotests: filter QEMU monitor \r\n aio: make aio_poll(ctx, true) block with no fds block: clean up bdrv_drain_all() throttling comments qcow2: use start_of_cluster() and offset_into_cluster() everywhere qemu-img: decrease progress update interval on convert qemu-img: round down request length to an aligned sector qemu-img: dynamically adjust iobuffer size during convert block/iscsi: set bs->bl.opt_transfer_length block: add opt_transfer_length to BlockLimits block/iscsi: set bdi->cluster_size qemu-img: fix usage instruction for qemu-img convert qemu-img: add support for skipping zeroes in input during convert qemu-nbd: add doc for option -f qemu-iotests: add test for snapshot in qemu-img convert qemu-img: add -l for snapshot in convert qemu-iotests: add 058 internal snapshot export with qemu-nbd case qemu-nbd: support internal snapshot export snapshot: distinguish id and name in load_tmp qemu-iotests: Split qcow2 only cases in 048 qemu-iotests: Clean up spaces in usage output ... Message-id: 1386347807-27359-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-07Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori
# By Alex Williamson (1) and others # Via Paolo Bonzini * qemu-kvm/uq/master: target-i386: fix cpuid leaf 0x0d qemu: mempath: prefault pages manually (v4) kvm: Query KVM for available memory slots Message-id: 1386345276-9803-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-07Merge remote-tracking branch 'kraxel/tags/pull-seabios-31b8b4e-1' into stagingAnthony Liguori
Update seabios to master snapshot (pre-1.7.4). Update vgabios, switch from lgplvgabios to seavgabios. Update build process to build both 128k and 256k bios versions. Use 256k bios for pc-*-2.0+ machine types. # gpg: Signature made Fri 06 Dec 2013 12:01:24 AM PST using RSA key ID D3E87138 # gpg: Can't check signature: public key not found # By Gerd Hoffmann # Via Gerd Hoffmann * kraxel/tags/pull-seabios-31b8b4e-1: pc: switch 2.0 machine types to large seabios binary roms: update vgabios binaries roms: update seabios binaries roms: enable seabios cross builds roms: build two seabios binaries roms: update seabios submodule to 31b8b4eea9d9ad58a73b22a6060d3ac1c419c26d add firmware to machine options add pc-{i440fx,q35}-2.0 machine types Message-id: 1386322527-23148-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-07Merge remote-tracking branch 'otubo/seccomp' into stagingAnthony Liguori
# By Paul Moore # Via Eduardo Otubo * otubo/seccomp: seccomp: add kill() to the syscall whitelist Message-id: 1386075077-3240-1-git-send-email-otubo@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-06Merge remote-tracking branch 'kwolf/tags/for-anthony' into stagingAnthony Liguori
Block patches for 2.0 (flushing block-next) # gpg: Signature made Fri 29 Nov 2013 08:43:18 AM PST using RSA key ID C88F2FD6 # gpg: Can't check signature: public key not found # By Peter Lieven (17) and others # Via Kevin Wolf * kwolf/tags/for-anthony: (41 commits) qemu-iotests: Add sample image and test for VMDK version 3 vmdk: Allow read only open of VMDK version 3 qemu-iotests: Filter out 'qemu-io> ' prompt qemu-iotests: Filter qemu-io output in 025 block: Use BDRV_O_NO_BACKING where appropriate qemu-iotests: Test snapshot mode block: Enable BDRV_O_SNAPSHOT with driver-specific options qemu-iotests: Make test case 030, 040 and 055 deterministic qemu-iotest: Add pause_drive and resume_drive methods blkdebug: add "remove_break" command qemu-iotests: Drop local version of cancel_and_wait from 040 sheepdog: support user-defined redundancy option sheepdog: refactor do_sd_create() qdict: Optimise qdict_do_flatten() qdict: Fix memory leak in qdict_do_flatten() MAINTAINERS: add sheepdog development mailing list COW: Extend checking allocated bits to beyond one sector COW: Speed up writes qapi: Change BlockDirtyInfo to list block: per caller dirty bitmap ... Message-id: 1385743555-27888-1-git-send-email-kwolf@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-06Merge remote-tracking branch 'sstabellini/xen-2013-12-01' into stagingAnthony Liguori
# By Paul Durrant (1) and Wei Liu (1) # Via Stefano Stabellini * sstabellini/xen-2013-12-01: xen-pvdevice: make device-id property compulsory xen: fix two errors when debug is enabled Message-id: alpine.DEB.2.02.1312011829000.3198@kaball.uk.xensource.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-06Merge remote-tracking branch 'rth/auxv-2' into stagingAnthony Liguori
# By Richard Henderson # Via Richard Henderson * rth/auxv-2: linux-user: Use qemu_getauxval for AT_EXECFD util: Use qemu_getauxval in linux qemu_cache_utils_init tcg-s390: Use qemu_getauxval in query_facilities tcg-arm: Use qemu_getauxval tcg-ppc64: Use qemu_getauxval osdep: Create qemu_getauxval and qemu_init_auxval Message-id: 1385757754-10702-1-git-send-email-rth@twiddle.net Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-06Merge remote-tracking branch 'riku/linux-user-for-upstream' into stagingAnthony Liguori
# By Erik de Castro Lopo (2) and others # Via Riku Voipio * riku/linux-user-for-upstream: linux-user: pass correct parameter to do_shmctl() linux-user: create target_structs header to place ipc_perm and shmid_ds flatload: fix non-GOT relocations linux-user: Implement handling of 5 POSIX timer syscalls. linux-user: Add target struct defs needed for POSIX timer syscalls. Message-id: cover.1385732338.git.riku.voipio@linaro.org Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-06Merge remote-tracking branch 'kraxel/tags/pull-usb-1' into stagingAnthony Liguori
Improvements for usb3 bulk stream (usb core, xhci). Bugfixes for uas emulation. Add remote wakeup support for ehci. Add suspend support for xhci. Misc minor tweaks and fixes. # gpg: Signature made Thu 28 Nov 2013 11:44:49 PM PST using RSA key ID D3E87138 # gpg: Can't check signature: public key not found # By Hans de Goede (11) and others # Via Gerd Hoffmann * kraxel/tags/pull-usb-1: usb: move usb_{hi,lo} helpers to header file. usb: add vendor request defines trace-events: Clean up after removal of old usb-host code Revert "usb-tablet: Don't claim wakeup capability for USB-2 version" ehci: implement port wakeup xhci: Call usb_device_alloc/free_streams usb: Add usb_device_alloc/free_streams usb: Add max_streams attribute to endpoint info uas: s/ui/iu/ uas: Fix response iu struct definition uas: Bounds check tags when using streams uas: Streams are numbered 1-y, rather then 0-x uas: Fix / cleanup usb_uas_task error handling uas: Only use report iu-s for task_mgmt status reporting scsi: Add 2 new sense codes needed by uas xhci: add support for suspend/resume xhci: Add a few missing checks for disconnected devices Message-id: 1385712381-30918-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-06Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori
# By Stefan Weil (9) and others # Via Michael Tokarev * mjt/trivial-patches: eeprom93xx: fix coding style hw/ppc/mac.h: remove unused BIOS_FILENAME definition Don't crash on keyboard input with no handler libcacard/vcard_emul_nss: Remove unused statement (value stored is never read) libcacard/cac: Remove unused statement (value stored is never read) virtio-net: fix the indent misc: Replace 'struct QEMUTimer' by 'QEMUTimer' qobject: Fix compiler warning (missing gnu_printf format attribute) acpi-build: Fix compiler warning (missing gnu_printf format attribute) .gitignore: Ignore config.status gtk: Replace conditional debug messages by trace methods console: Replace conditional debug messages by trace methods trace: Remove trace.h from hw/usb/hcd-ehci.h (less dependencies) trace: Remove trace.h from console.h (less dependencies) Message-id: 1385408466-13183-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-06eeprom93xx: fix coding styleAntony Pavlov
scripts/checkpatch.pl reports about some style problems, this commit fixes some of them: ERROR: space prohibited before open square bracket '[' + .fields = (VMStateField []) { ERROR: space prohibited after that '!' (ctx:BxW) + if (! eeprom->eecs && eecs) { ^ ERROR: space prohibited after that '!' (ctx:WxW) + } else if (eeprom->eecs && ! eecs) { ^ ERROR: space prohibited after that '!' (ctx:WxW) + } else if (eecs && ! eeprom->eesk && eesk) { ^ ERROR: switch and case should be at the same indent switch (address >> (eeprom->addrbits - 2)) { + case 0: [...] + case 1: [...] + case 2: [...] + case 3: ERROR: return is not a function, parentheses are not required + return (eeprom->eedo); ERROR: switch and case should be at the same indent switch (nwords) { + case 16: + case 64: [...] + case 128: + case 256: [...] + default: Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Stefan Weil <sw@weilnetz.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Cc: qemu-trivial@nongnu.org Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-06vfio-pci: Release all MSI-X vectors when disabledAlex Williamson
We were relying on msix_unset_vector_notifiers() to release all the vectors when we disable MSI-X, but this only happens when MSI-X is still enabled on the device. Perform further cleanup by releasing any remaining vectors listed as in-use after this call. This caused a leak of IRQ routes on hotplug depending on how the guest OS prepared the device for removal. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: qemu-stable@nongnu.org
2013-12-06vfio-pci: Add debug config options to disable MSI/X KVM supportAlex Williamson
It's sometimes useful to be able to verify interrupts are passing through correctly. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-12-06vfio-pci: Fix Nvidia MSI ACK through 0x88000 quirkAlex Williamson
When MSI is enabled on Nvidia GeForce cards the driver seems to acknowledge the interrupt by writing a 0xff byte to the MSI capability ID register using the PCI config space mirror at offset 0x88000 from BAR0. Without this, the device will only fire a single interrupt. VFIO handles the PCI capability ID/next registers as virtual w/o write support, so any write through config space is currently dropped. Add a check for this and allow the write through the BAR window. The registers are read-only anyway. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-12-06vfio-pci: Make use of new KVM-VFIO deviceAlex Williamson
Add and remove groups from the KVM virtual VFIO device as we make use of them. This allows KVM to optimize for performance and correctness based on properties of the group. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-12-06linux-headers: Update from v3.13-rc3Alex Williamson
Update to tag v3.13-rc3 (374b105797c3d4f29c685f3be535c35f5689b30e) Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-12-06qemu-iotests: filter QEMU monitor \r\nStefan Hajnoczi
SMTP does not preserve newlines. This is normally not a problem if the email body uses DOS or UNIX newlines consistently. In 051.out we mix UNIX newlines with DOS newlines (since QEMU monitor output uses \r\n). This patch filters the QEMU monitor output so the golden master file uses UNIX newlines exclusively. The result is that patches touching 051.out will apply cleanly without mangling newlines after this commit. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-06aio: make aio_poll(ctx, true) block with no fdsStefan Hajnoczi
This patch drops a special case where aio_poll(ctx, true) returns false instead of blocking if no file descriptors are waiting on I/O. Now it is possible to block in aio_poll() to wait for aio_notify(). This change eliminates busy waiting. bdrv_drain_all() used to rely on busy waiting to completed throttled I/O requests but this is no longer required so we can simplify aio_poll(). Note that aio_poll() still returns false when aio_notify() was used. In other words, stopping a blocking aio_poll() wait is not considered making progress. Adjust test-aio /aio/bh/callback-delete/one which assumed aio_poll(ctx, true) would immediately return false instead of blocking. Reviewed-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-06block: clean up bdrv_drain_all() throttling commentsStefan Hajnoczi
Since cc0681c45430a1f1a4c2d06e9499b7775afc9a18 ("block: Enable the new throttling code in the block layer.") bdrv_drain_all() no longer spins. The code used to look as follows: do { busy = qemu_aio_wait(); /* FIXME: We do not have timer support here, so this is effectively * a busy wait. */ QTAILQ_FOREACH(bs, &bdrv_states, list) { while (qemu_co_enter_next(&bs->throttled_reqs)) { busy = true; } } } while (busy); Note that throttle requests are kicked but I/O throttling limits are still in effect. The loop spins until the vm_clock time allows the request to make progress and complete. The new throttling code introduced bdrv_start_throttled_reqs(). This function not only kicks throttled requests but also temporarily disables throttling so requests can run. The outdated FIXME comment can be removed. Also drop the busy = true assignment since we overwrite it immediately afterwards. Reviewed-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-06qcow2: use start_of_cluster() and offset_into_cluster() everywhereHu Tao
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-06qemu-img: decrease progress update interval on convertPeter Lieven
when doing very large jobs updating the progress only every 2% is too rare. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-06qemu-img: round down request length to an aligned sectorPeter Lieven
this patch shortens requests to end at an aligned sector so that the next request starts aligned. [Squashed Peter's fix for bdrv_get_info() failure discussed on the mailing list. --Stefan] Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-06pc: switch 2.0 machine types to large seabios binaryGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-06roms: update vgabios binariesGerd Hoffmann
This also switches from lgplvgabios to seavgabios. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-06roms: update seabios binariesGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-06roms: enable seabios cross buildsGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-06roms: build two seabios binariesGerd Hoffmann
Adding xhci support to seabios made it jump over the 128k line. Changing the bios size breaks migration, so we have to keep a 128k seabios binary for old machine types. New machine types can use a large 256k bios which should be big enougth for a while. This patch updates the seabios build process to build seabios twice, once full featured and once with xen and xhci turned off so the resulting binary is small enougth to fit into 128k. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-06roms: update seabios submodule to 31b8b4eea9d9ad58a73b22a6060d3ac1c419c26dGerd Hoffmann
Updates seabios to git master snapshot. seabios is in freeze now, update to final 1.7.4 will follow later this year. Summary of major changes: * Support for acpi table loading from qemu. * Support for the xhci host adapter. * Support for the pvscsi HBA. * Various minor bug fixes. * Lots of cleanups. Full shortlog since 1.7.3 (note that some of these changes have been cherry-picked into 1.7.3-stable): Evgeny Budilovsky (1): Add pvscsi boot support Gerd Hoffmann (27): coreboot: add cbmem console support Add CONFIG_DEBUG_COREBOOT config option apm: fix shutdown ahci: add missing check for allocation failure bochsvga: fallback to stdvga if dispi interface isn't present Add generic qemu detection Drop coreboot qemu detection Add qemu detection to csm uas: add (temporary) superspeed stopgap usb: add usb_update_pipe() usb: add xhci support fix buildversion.sh build: simplify cross builds build: create output dirs in do-kconfig build: explicitly set ROM size Add qemu_cfg_e820 function. Add support for etc/e820 fw_cfg file pci: don't reorder entries when moving to 64bit list pci: don't map usb host adapters above 4G pci: align 64bit pci regions to 1G pci: tweak + comment minimum allocations pci: log pci windows pci: map 64-bit BARs at location provided by emulator ahci: zap real mode macros ahci: remote some parentheses ahci: alloc structs in high memory add hw/serialio.c to SRC32SEG Jonathan A. Kollasch (1): vgahooks: add SM720 VGA BIOS hooks for WIN Enterprises MB-60470 Kevin O'Connor (80): Fix USB EHCI detection that was broken in hlist conversion of PCIDevices. Update README to include info on VARLOW variables. PIC code cleanups. Move internal timer code from clock.c to a new file timer.c. Don't pass khz to pmtimer_setup - it's always PM_TIMER_FREQUENCY. Add helper functions to convert timer irqs to milliseconds. Improve accuracy of internal timers. Rename cpu_khz to TimerKHz. Shift CPU TSC down to reduce need for 64bit variables. Rename check_timer() function (and similar) to irqtimer_check(). Rename check_tsc() (and similar) to timer_check() and use u32. Separate out timer setup code. Unify pmtimer_read() and pittimer_read() code. Default unused UMB areas to be read-only. Add missing mathcp_setup() call to CSM code. Fix bug in CBFS file walking with compressed files. Support custom boot menu prompt and custom boot menu key. Minor cleanups to smm assembler. Add config option to support memory allocations in 9-segment. Minor - no need to declare MaxCountCPUs as VARFSEG. Minor - simplify rom_reserve(). Rename tools/ directory to scripts/ directory. Update kconfig to latest version. build: Don't use vpath makefile directive. Move code centered around specific hardware devices to src/hw/ Move code cenetered around firmware initialization to src/fw/ build: Reorder makefile source list to group like files together. README: Update readme to note scripts/ directory rename and vgasrc/ directory. vgabios: Rename stdvga_bpp_factor to stdvga_vram_ratio. vgabios: Limit the range of the VBE number of "pages" parameter. readme: Minor - fix typo in readme. Split x86 specific functions out of util.c/h to new files x86.c/h. Move keyboard calling code from util.c to boot.c. Rename util.c to string.c and introduce string.h. build: Perform compile checking on vgasrc code. Move stacks.c definitions from util.h to new file stacks.h. Move romfile definitions from util.h to new file romfile.h. Move malloc code from pmm.c to new files malloc.c and malloc.h. Move function definitions for output.c from util.h to new file output.h. Move definition of struct segoff_s from farptr.h to types.h. build: Fix import of gcc dependency files. Move pirtable definitions from hw/pci.h to std/pirtable.h and util.h. Move optionroms.h to std/optionrom.h and util.h. Move vbe.h to std/vbe.h. Move fw/LegacyBios.h to std/LegacyBios.h and remove csm.h. Move fw/smbios.h to std/smbios.h. Move fw/mptable.h to std/mptable.h. Move fw/acpi.h to std/acpi.h. Move pnpbios definition to new file std/pnpbios.h. Move pmm definitions to new file std/pmm.h. Split disk.h into block.h and std/disk.h. Move standard bda type info from biosvar.h to std/bda.h. Merge bmp.h, boot.h, jpeg.h, and post.h into util.h. Sort the sections of util.h. Move PIT setup from clock.c to hw/timer.c. Rename hw/cmos.h to hw/rtc.h and copy RTC code from clock.c to hw/rtc.c. Move dma code to new file hw/dma.c. Remove ioport.h; disperse its contents to other header files. Minor - update file comments in src/malloc.c. Rename fields of 'struct chs_s' and use in floppy lba2chs(). Rearrange stack_hop_back() call in wait_irq, check_irqs, and _farcall16. Minor - move call16 assembler in romlayout.S. Make __call16 use C calling convention and support two passed parameters. Update _farcall16() to pass segment of callregs explicitly. Support call16() calls after entering 32bit mode from call32(). Run ahci code entirely in 32bit mode. Build different final files for QEMU, coreboot, and CSM. Convert op->drive_g from a 16bit pointer to a 32 bit "GLOBALFLAT" pointer. megasas: Don't attempt to access 'struct pci_device' at runtime. Minor - eliminate the SET_GLOBAL macro. Move low-level hardware writing from output.c to new file hw/serialio.c. vgabios: Load the DAC palette in "packed" modes on Cirrus and BochsVGA. vgabios: Support custom fonts in vga framebuffer text writing. vgabios: Add bochsvga "HDTV" resolutions. vgabios: Avoid possible divide by zero in bochsvga_set_displaystart. vgabios: Work around lack of support for "calll" in x86emu emulation. Minor - update file comment on bootsplash.c. vgabios: Support allocating an extra stack for vgabios calls and default on. vgabios: Move initialization code to new file vgainit.c. floppy: Minor - add warnings if timeouts occur. Michael S. Tsirkin (6): acpi: sync FADT flags from PIIX4 to Q35 acpi_extract.py: document DEVICE directives biostables: support looking up RSDP romfile_loader: utility to patch in-memory ROM files acpi: load and link tables through romfile loader acpi: strip compiler info in built-in DSDT if any Paul Menzel (2): ACPI DSDT: Make control method `IQCR` serialized hw/usb-xhci.c: Code refactoring to not override initializers in `speed_from_xhci[16]` Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-05target-i386: fix cpuid leaf 0x0dLiu Jinsong
Fix cpuid leaf 0x0d which incorrectly parsed eax and ebx. However, before this patch the CPUID worked fine -- the .offset field contained the size _and_ was stored in the register that is supposed to hold the size (eax), and likewise the .size field contained the offset _and_ was stored in the register trhat is supposed to hold the offset (ebx). Signed-off-by: Liu Jinsong <jinsong.liu@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-12-05qemu-img: dynamically adjust iobuffer size during convertPeter Lieven
since the convert process is basically a sync operation it might be benificial in some case to change the hardcoded I/O buffer size to a greater value. This patch increases the I/O buffer size if the output driver advertises an optimal transfer length or discard alignment that is greater than the default buffer size of 2M. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-05block/iscsi: set bs->bl.opt_transfer_lengthPeter Lieven
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-05block: add opt_transfer_length to BlockLimitsPeter Lieven
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-05block/iscsi: set bdi->cluster_sizePeter Lieven
this patch aims to set bdi->cluster_size to the internal page size of the iscsi target so that enabled callers can align requests properly. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-05qemu-img: fix usage instruction for qemu-img convertPeter Lieven
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-05qemu-img: add support for skipping zeroes in input during convertPeter Lieven
we currently do not check if a sector is allocated during convert. This means if a sector is unallocated that we allocate a bounce buffer of zeroes, find out its zero later and do not write it in the best case. In the worst case this can lead to reading blocks from a raw device (like iSCSI) altough we could easily know via get_block_status that they are zero and simply skip them. This patch also fixes the progress output not being at 100% after a successful conversion. Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-04qemu-nbd: add doc for option -fWenchao Xia
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-04qemu-iotests: add test for snapshot in qemu-img convertWenchao Xia
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-04qemu-img: add -l for snapshot in convertWenchao Xia
Now qemu-img convert have similar options as qemu-nbd for internal snapshot. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-04qemu-iotests: add 058 internal snapshot export with qemu-nbd caseWenchao Xia
This case can't run when IMGPROTO=nbd, since it needs to create some internal snapshot which would fail for EOF write request, even when TEST_IMG is exported with "-f raw" in common.rc, so set _supported_proto to file. _require_command() is changed to tip what util is missing, instead of printing a blank. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-04qemu-nbd: support internal snapshot exportWenchao Xia
Now it is possible to directly export an internal snapshot, which can be used to probe the snapshot's contents without qemu-img convert. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-04snapshot: distinguish id and name in load_tmpWenchao Xia
Since later this function will be used so improve it. The only caller of it now is qemu-img, and it is not impacted by introduce function bdrv_snapshot_load_tmp_by_id_or_name() that call bdrv_snapshot_load_tmp() twice to keep old search logic. bdrv_snapshot_load_tmp_by_id_or_name() return int to let caller know the errno, and errno will be used later. Also fix a typo in comments of bdrv_snapshot_delete(). Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-04qemu-iotests: Split qcow2 only cases in 048Fam Zheng
Format "raw" doesn't always work on certain file systems (e.g. tmpfs). Use qcow2 to make the allocation status explicit and split into a new case. [Resolved merge conflict due to "qemu-io> " prompt filter, added 074 to group file, and fixed up s/048/074/ copy-paste mistake. --Stefan] Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-04qemu-iotests: Clean up spaces in usage outputFam Zheng
Whitespace changes to align columns. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-04qemu-iotests: Change default cache mode to "writeback"Fam Zheng
So that the tests can run faster. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-30 08:57:50 +0000