aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-07-22usb-ehci: trace: rename "next" to "nxt".Gerd Hoffmann
"next" is reserved in systemtap thus using this as a trace parameter name causes trouble when trying to trace with systemtap. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-22usb-uhci: fix irq handling on error.Gerd Hoffmann
Spec on UHCI_STS_USBERR: "If the TD on which the error interrupt occurred also had its IOC bit set, both this bit and Bit 0 are set." Make UHCI emulation do that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-22usb-hid: fixup changed tracking.Gerd Hoffmann
Remove leftover calls to usb_hid_changed(). Take care to update the changed flag after delivering a event via GET_REPORT like we do when sending events via interrupt endpoint. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-21SPARC64: implement addtional MMU faults related to nonfaulting loadTsuneo Saito
This patch implements MMU faults caused by TTE.NFO and TTE.E: - access other than nonfaulting load to a page marked NFO should raise data_access_exception - nonfaulting load to a page marked with E bit should raise data_access_exception To distinguish nonfaulting loads, this patch extends (abuses?) the rw argument of get_physical_address_data(). rw is set to 4 on nonfaulting loads. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-21SPARC64: implement MMU miss traps on nonfaulting loadsTsuneo Saito
Nonfaulting loads should raise fast_data_access_MMU_miss traps as normal loads do. It is up to the guest OS kernel that detect MMU misses on nonfaulting load instructions and make them complete without signaling. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-21SPARC64: fix fault status overwritten on nonfaulting loadTsuneo Saito
cpu_get_phys_page_nofault() calls get_physical_address() twice, that results in overwriting the fault status in the SFSR. We need this change in order for nonfaulting loads to raising MMU faults as normal loads do. Also removed the call to cpu_get_physical_page_desc() since we are going to modify nonfaulting loads raising MMU faults. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-21SPARC64: split cpu_get_phys_page_debug() from cpu_get_phys_page_nofault()Tsuneo Saito
This patch makes cpu_get_phys_page_debug() independent from cpu_get_phys_page_nofault() in advance of implementing nonfaulting load. This also modifies cpu_get_phys_page_nofault() to be compiled only on TARGET_SPARC64 because it is not required on SPARC32. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-21SPARC64: introduce a convenience function for getting physical addressesTsuneo Saito
Introduce cpu_sparc_get_phys_page() to be used as a help for splitting cpu_get_phys_page_debug() from cpu_get_phys_page_nofault(). Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-21SPARC64: SFSR cleanup and fixTsuneo Saito
Add macros for SFSR fields and use macros instead of magic numbers. Also fix the update of the register fields on MMU faults. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-21SPARC64: TTE bits cleanupTsuneo Saito
Add macros for TTE bits and modify to use macros instead of magic numbers. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20Update OpenBIOS images for Sparc32 and Sparc64Blue Swirl
Update Sparc32 and Sparc64 OpenBIOS images to SVN revision 1045. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20Fix unassigned memory access handlingBlue Swirl
cea5f9a28faa528b6b1b117c9ab2d8828f473fef exposed bugs in unassigned memory access handling. Fix them by always passing CPUState to the handlers. Reported-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20Avoid CPU endian memory accesses in devicesBlue Swirl
Don't compile virtio.c in hwlib, it depends on memory accesses performed in CPU endianness. Make loads and stores in CPU endianness unavailable to devices and poison them to avoid further bugs. Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20SPARC64: treat UA2007 ASI_BLK_* as translating ASIs.Tsuneo Saito
UA2007 ASI_BLK_* should be added in is_translating_asi(). Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20checkpatch: Fix bracing false positives on #ifBlue Swirl
789f88d0b21fedfd4251d56bb7a9fbfbda7a4ac7 only fixed #else, fix also #if. Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20tcg/mips: Fix regression caused by typo (copy + paste bug)Stefan Weil
cppcheck reports an error: qemu/tcg/mips/tcg-target.c:1487: error: Invalid number of character (() The unpatched code won't compile on mips hosts starting with commit cea5f9a28faa528b6b1b117c9ab2d8828f473fef. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20ds1225y: convert to qdev device, and use it in MIPS Jazz emulationHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20ds1225y: use trace frameworkHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20ds1225y: Remove protection stuff, which doesn't belong to this deviceHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20SPARC64: add missing break on fmovdccTsuneo Saito
"break" is missing on V9 fmovdcc (%icc). Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20SPARC64: fix VIS1 SIMD signed compare instructionsTsuneo Saito
The destination registers of SIMD signed compare instructions (fcmp*<16|32>) are not FP registers but general purpose r registers. Comparisons should be freg_rs1 CMP freg_rs2, that were reversed. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20Merge branch 'for-upstream' of git://git.linaro.org/people/pmaydell/qemu-armBlue Swirl
* 'for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm: target-arm: Fix BASEPRI, BASEPRI_MAX, and FAULTMASK access target-arm: Minimal implementation of performance counters Revert "Makefile.target: Allow target helpers to be in any *_helper.c file" Revert "target-arm: Use global env in neon_helper.c helpers" target-arm: Pass fp status pointer explicitly to neon fp helpers target-arm: Make VFP binop helpers take pointer to fpstatus, not CPUState target-arm: Add helper function to generate code to get fpstatus pointer Revert "target-arm: Use global env in iwmmxt_helper.c helpers" Conflicts: Makefile.target
2011-07-19Merge remote-tracking branch 'agraf/xen-next' into stagingAnthony Liguori
2011-07-19Merge remote-tracking branch 'kraxel/usb.19' into stagingAnthony Liguori
2011-07-19Merge remote-tracking branch 'spice/spice.v38' into stagingAnthony Liguori
2011-07-19Merge remote-tracking branch 'mst/for_anthony' into stagingAnthony Liguori
2011-07-19Merge remote-tracking branch 'riku/linux-user-for-upstream' into stagingAnthony Liguori
2011-07-18virtio-console: Prevent abort()s in case of host chardev closeAmit Shah
A host chardev could close just before the guest sends some data to be written. This will cause an -EPIPE error. This shouldn't be propagated to virtio-serial-bus. Ideally we should close the port once -EPIPE is received, but since the chardev interface doesn't return such meaningful values to its users, all we get is -1 for any kind of error. Just return 0 for now and wait for chardevs to return better error messages to act better on the return messages. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-07-18virtio-serial-bus: Fix trailing \n in error_report stringAmit Shah
Markus fixed offenders in the file but one instance sneaked in via another patch. Fix it. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-07-18virtio-console: Add some trace eventsAmit Shah
Add some trace events for messages passed between the char layer and the virtio-serial bus. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-07-18virtio-serial-bus: Add trace eventsAmit Shah
Add some trace events for messages passed between the guest and host. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-07-17virtio: fix indirect descriptor buffer overflowMichael S. Tsirkin
We were previously allowing arbitrarily-long indirect descriptors, which could lead to a buffer overflow in qemu-kvm process. CVE-2011-2212 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-17xen: move to new pci initializersMichael S. Tsirkin
move ids to pci info structure Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-17hw/piix_pci.c: Fix PIIX3-xen to initialize idsAnthony PERARD
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-17pci_ids: tweak names to match linux/pci_ids.hMichael S. Tsirkin
Sync xen names to ones used by linux. Add xen platform device id as well. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-17vhost: fix double free on device stopMichael S. Tsirkin
vhost dev stop failed to clear the log field. Typically not an issue as dev start overwrites this field, but if logging gets disabled before the following start, it doesn't so this causes a double free. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-17xen_console: fall back to qemu serial deviceAlexander Graf
The new xen_console protocol changed the default xen_console output device from whatever Qemu chose to whatever xenstore choses and "pty" as fallback. This is not how Qemu works. It has its own serial redirection semantics. So it xenstore doesn't contain information on what to do, Qemu is the place to ask. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen_console: support the new extended xenstore protocolStefano Stabellini
Since CS 21994 on xen-unstable.hg and CS 466608f3a32e1f9808acdf832a5843af37e5fcec on qemu-xen-unstable.git, few changes have been introduced to the PV console xenstore protocol, as described by the document docs/misc/console.txt under xen-unstable.hg. From the Qemu point of view, very few modifications are needed to correctly support the protocol: read from xenstore the "output" node that tell us what the output of the PV console is going to be. In case the output is a tty, write to xenstore the device name. Changes in v2: - fix error paths: free malloc'ed strings and close the xenstore connection before returning; - remove useless snprintf in xenstore_store_pv_console_info if i == 0. Changes in v3: - replace xs_daemon_open/xs_daemon_close with xs_open/xs_close. Changes in v4: - add a compatibility implementation of xs_open/xs_close. Changes in v5: - fix code style. [agraf] fix build error due to missing stub Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17checkpatch: don't error out on },{ linesAlexander Graf
When having code like this: static PCIDeviceInfo piix_ide_info[] = { { .qdev.name = "piix3-ide", .qdev.size = sizeof(PCIIDEState), .qdev.no_user = 1, .no_hotplug = 1, .init = pci_piix_ide_initfn, .vendor_id = PCI_VENDOR_ID_INTEL, .device_id = PCI_DEVICE_ID_INTEL_82371SB_1, .class_id = PCI_CLASS_STORAGE_IDE, },{ .qdev.name = "piix4-ide", .qdev.size = sizeof(PCIIDEState), .qdev.no_user = 1, .no_hotplug = 1, .init = pci_piix_ide_initfn, .vendor_id = PCI_VENDOR_ID_INTEL, .device_id = PCI_DEVICE_ID_INTEL_82371AB, .class_id = PCI_CLASS_STORAGE_IDE, },{ /* end of list */ } }; checkpatch currently errors out, claiming that spaces need to follow commas. However, this particular style of defining structs is pretty common in qemu code and very readable. So let's declare it as supported for the above case. Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen_disk: treat "aio" as "raw"Stefano Stabellini
Sometimes the toolstack uses "aio" without an additional format identifier, in such cases use "raw". Updated in v2: - fix code style. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17qemu_ram_ptr_length: take ram_addr_t as argumentsStefano Stabellini
qemu_ram_ptr_length should take ram_addr_t as argument rather than target_phys_addr_t because is doing comparisons with RAMBlock addresses. cpu_physical_memory_map should create a ram_addr_t address to pass to qemu_ram_ptr_length from PhysPageDesc phys_offset. Remove code after abort() in qemu_ram_ptr_length. Changes in v2: - handle 0 size in qemu_ram_ptr_length; - rename addr1 to raddr; - initialize raddr to ULONG_MAX. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen_disk: cope with missing xenstore "params" nodeStefano Stabellini
When disk is a cdrom and the drive is empty the "params" node in xenstore might be missing completely: cope with it instead of segfaulting. Updated in v2: - actually removed the strchr(blkdev->params, ':') that caused the segfault; - free all the allocated strings from xenstore before returning; Updated in v3: - set blkdev fields to NULL after free'ing them. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen: add vkbd support for PV on HVM guestsStefano Stabellini
Register the vkbd backend even when running as device emulator for HVM guests: it is useful because it doesn't need a frequent timer like usb. Check whether the XenInput DisplayState has been set in the initialise state, rather than the input state. In case the DisplayState hasn't been set and there is no vfb for this domain, then set the XenInput DisplayState to the default one. Changed in v2: - use qemu_free instead of free; Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen_console: fix memory leakStefano Stabellini
con_init leaks the string "type", fix it. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen: enable console and disk backend in HVM modeStefano Stabellini
Initialize the Xen console backend and the Xen disk backend even when running in HVM mode so that PV on HVM drivers can connect to them. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen: Fold CONFIG_XEN_MAPCACHE into CONFIG_XENJan Kiszka
Xen won't be enabled if there is no backend support available for the host. And that also means the map cache will work. So drop the separate config switch and move the required stubs over to xen-stub.c. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen: Clean up map cache API namingJan Kiszka
The map cache is a Xen thing, so its API should make this clear. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen: Clean up build systemJan Kiszka
Introduce CONFIG_XEN_BACKEND so that this new config solely controls the target-independent backend build and CONFIG_XEN can focus on per-target building. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-16Fix signal handling of SIG_IPI when io-thread is enabledAlexandre Raymond
Both the signal thread (via sigwait()) and the cpu thread (via a normal signal handler) were attempting to catch SIG_IPI. This resulted in random freezes under Darwin. This patch separates SIG_IPI from the rest of the signals handled by the signal thread, because it is independently caught by the cpu thread. Signed-off-by: Alexandre Raymond <cerbere@gmail.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-16Fix signal handling when io-thread is disabledAlexandre Raymond
Changes since v1: - take pthread_sigmask() out of the ifdef as it is now common to both parts. This fix effectively blocks, in the main thread, the signals handled by signalfd or the compatibility signal thread. This way, such signals are received synchronously in the main thread through sigfd_handler() instead of triggering the signal handler directly, asynchronously. Signed-off-by: Alexandre Raymond <cerbere@gmail.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 06:00:37 +0000