| Age | Commit message (Collapse) | Author |
|---|
|
The BLKSSZGET ioctl takes an argument which is a pointer to an int.
We were incorrectly declaring it to take a pointer to a long, which
meant that we would incorrectly write to memory which we should not
if the guest is a 64-bit architecture.
In particular, kpartx uses this ioctl to write to an int on the
stack, which tends to result in it crashing immediately.
Reported-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Add support for the /dev/loop-control ioctls:
LOOP_CTL_ADD
LOOP_CTL_REMOVE
LOOP_CTL_GET_FREE
[RV: fixed to apply to new header guards]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Many syscalls which take a sigset_t argument also take an argument
giving the size of the sigset_t. The kernel insists that this
matches its idea of the type size and fails EINVAL if it is not.
Implement this logic in QEMU. (This mostly just means some LTP test
cases which check error cases now pass.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
|
|
Nested types are used by the kernel to send link information and
protocol properties.
We can see following errors with "ip link show":
Unimplemented nested type 26
Unimplemented nested type 26
Unimplemented nested type 18
Unimplemented nested type 26
Unimplemented nested type 18
Unimplemented nested type 26
This patch implements nested types 18 (IFLA_LINKINFO) and
26 (IFLA_AF_SPEC).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
As we convert sockaddr for AF_PACKET family for sendto() (target to
host) we need also to convert this for getsockname() (host to target).
arping uses getsockname() to get the the interface address and uses
this address with sendto().
Tested with:
/sbin/arping -D -q -c2 -I eno1 192.168.122.88
...
getsockname(3, {sa_family=AF_PACKET, proto=0x806, if2,
pkttype=PACKET_HOST, addr(6)={1, 10c37b6b9a76}, [18]) = 0
...
sendto(3, "..." 28, 0,
{sa_family=AF_PACKET, proto=0x806, if2, pkttype=PACKET_HOST,
addr(6)={1, ffffffffffff}, 20) = 28
...
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Fix passwd using netlink audit.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Netlink is byte-swapping data in the guest memory (it's bad).
It's ok when the data come from the host as they are generated by the
host.
But it doesn't work when data come from the guest: the guest can
try to reuse these data whereas they have been byte-swapped.
This is what happens in glibc:
glibc generates a sequence number in nlh.nlmsg_seq and calls
sendto() with this nlh. In sendto(), we byte-swap nlmsg.seq.
Later, after the recvmsg(), glibc compares nlh.nlmsg_seq with
sequence number given in return, and of course it fails (hangs),
because nlh.nlmsg_seq is not valid anymore.
The involved code in glibc is:
sysdeps/unix/sysv/linux/check_pf.c:make_request()
...
req.nlh.nlmsg_seq = time (NULL);
...
if (TEMP_FAILURE_RETRY (__sendto (fd, (void *) &req, sizeof (req), 0,
(struct sockaddr *) &nladdr,
sizeof (nladdr))) < 0)
<here req.nlh.nlmsg_seq has been byte-swapped>
...
do
{
...
ssize_t read_len = TEMP_FAILURE_RETRY (__recvmsg (fd, &msg, 0));
...
struct nlmsghdr *nlmh;
for (nlmh = (struct nlmsghdr *) buf;
NLMSG_OK (nlmh, (size_t) read_len);
nlmh = (struct nlmsghdr *) NLMSG_NEXT (nlmh, read_len))
{
<we compare nlmh->nlmsg_seq with corrupted req.nlh.nlmsg_seq>
if (nladdr.nl_pid != 0 || (pid_t) nlmh->nlmsg_pid != pid
|| nlmh->nlmsg_seq != req.nlh.nlmsg_seq)
continue;
...
else if (nlmh->nlmsg_type == NLMSG_DONE)
/* We found the end, leave the loop. */
done = true;
}
}
while (! done);
As we have a continue on "nlmh->nlmsg_seq != req.nlh.nlmsg_seq",
"done" cannot be set to "true" and we have an infinite loop.
It's why commands like "apt-get update" or "dnf update hangs".
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
fd_trans_target_to_host_data() and fd_trans_host_to_target_data() must
return the length of processed data.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
staging
# gpg: Signature made Tue 19 Jul 2016 03:33:40 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
e1000e: fix building without CONFIG_VMXNET3_PCI
MAINTAINERS: release Scott from being a rocker maintainer
tap: fix memory leak on failure to create a multiqueue tap device
net: fix incorrect argument to iov_to_buf
net: fix incorrect access to pointer
e1000e: fix incorrect access to pointer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Now that we can support boxed commands, use it to greatly
reduce the number of parameters (and likelihood of getting
out of sync) when adjusting drive-mirror parameters.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <1468535878-3760-1-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Now that we can support boxed commands, use it to greatly
reduce the number of parameters (and likelihood of getting
out of sync) when adjusting throttle parameters.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <1468468228-27827-11-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Turn on the ability to pass command and event arguments in
a single boxed parameter, which must name a non-empty type
(although the type can be a struct with all optional members).
For structs, it makes it possible to pass a single qapi type
instead of a breakout of all struct members (useful if the
arguments are already in a struct or if the number of members
is large); for other complex types, it is now possible to use
a union or alternate as the data for a command or event.
The empty type may be technically feasible if needed down the
road, but it's easier to forbid it now and relax things to allow
it later, than it is to allow it now and have to special case
how the generated 'q_empty' type is handled (see commit 7ce106a9
for reasons why nothing is generated for the empty type). An
alternate type is never considered empty, but now that a boxed
type can be either an object or an alternate, we have to provide
a trivial QAPISchemaAlternateType.is_empty(). The new call to
arg_type.is_empty() during QAPISchemaCommand.check() requires
that we first check the type in question; but there is no chance
of introducing a cycle since objects do not refer back to commands.
We still have a split in syntax checking between ad-hoc parsing
up front (merely validates that 'boxed' has a sane value) and
during .check() methods (if 'boxed' is set, then 'data' must name
a non-empty user-defined type).
Generated code is unchanged, as long as no client uses the
new feature.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-10-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Test files renamed to *-boxed-*]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The next patch will add support for passing a qapi union type
as the 'data' of a command. But to do that, the user function
for implementing the command, as called by the generated
marshal command, must take the corresponding C struct as a
single boxed pointer, rather than a breakdown into one
parameter per member. Even without a union, being able to use
a C struct rather than a list of parameters can make it much
easier to handle coding with QAPI.
This patch adds the internal plumbing of a 'boxed' flag
associated with each command and event. In several cases,
this means adding indentation, with one new dead branch and
the remaining branch being the original code more deeply
nested; this was done so that the new implementation in the
next patch is easier to review without also being mixed with
indentation changes.
For this patch, no behavior or generated output changes, other
than the testsuite outputting the value of the new flag
(always False for now).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-9-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Identifier box renamed to boxed in two places]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Commit 7ce106a9 documented why we don't generated a visit_type_FOO()
for implicit types; and therefore events with an anonymous type for
'data' have to open-code a visit. Note that the open-coded visit in
qapi-event.c is slightly different from what is done in
qapi-visit.c for normal types, in part because we don't have to
check for *obj being NULL or free things on error. But where the
type is not implicit, it is nicer to reuse the normal visit instead
of open-coding a duplicate.
At the moment, the only event with a non-implicit 'data' is in the
testsuite, where test-qapi-event.c changes as follows:
|@@ -155,6 +155,7 @@ void qapi_event_send___org_qemu_x_event(
| __org_qemu_x_Struct param = {
| __org_qemu_x_member1, (char *)__org_qemu_x_member2, has_q_wchar_t, q_wchar_t
| };
|+ __org_qemu_x_Struct *arg = ¶m;
|
| emit = qmp_event_get_func_emit();
| if (!emit) {
|@@ -164,16 +165,7 @@ void qapi_event_send___org_qemu_x_event(
| qmp = qmp_event_build_dict("__ORG.QEMU_X-EVENT");
|
| v = qmp_output_visitor_new(&obj);
|-
|- visit_start_struct(v, "__ORG.QEMU_X-EVENT", NULL, 0, &err);
|- if (err) {
|- goto out;
|- }
|- visit_type___org_qemu_x_Struct_members(v, ¶m, &err);
|- if (!err) {
|- if (!err) {
|- visit_check_struct(v, &err);
|- }
|- visit_end_struct(v, NULL);
|+ visit_type___org_qemu_x_Struct(v, "__ORG.QEMU_X-EVENT", &arg, &err);
| if (err) {
| goto out;
| }
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-8-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Ever since commit 12f254f removed the last parameterization
of gen_err_check(), it no longer makes sense to hide the three
lines of generated C code behind a macro call. Just inline it
into the remaining users.
No change to generated code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-7-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
In the near future, we want to lift our artificial restriction of
no variants at the top level of an event, at which point the
currently open-coded check for empty members will become
insufficient. Factor it out into a new helper method is_empty()
now, and future-proof it by checking variants, too, along with an
assert that it is not used prior to the completion of .check().
Update places that were checking for (non-)empty .members to use
the new helper.
All of the current callers assert that there are no variants (either
directly, or by qapi.py asserting that base types have no variants),
so this is not a semantic change.
No change to generated code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-6-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Clean up the only remaining external use of the tag_name field of
QAPISchemaObjectTypeVariants, by explicitly listing the generated
'type' tag for all variants in the testsuite (you can still tell
simple unions by the -wrapper types). Then we can mark the
tag_name field as private by adding a leading underscore to prevent
any further use.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-5-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Commit 7ce106a rendered QAPISchemaObjectType.c_name() redundant,
since it now does nothing more than delegate to its superclass.
However, rather than deleting it, we can restore part of the
assertion that was removed in that commit, to prove that we never
emit the empty type directly in generated code, but rather
special-case it as a built-in that makes other aspects of code
generation easier to reason about.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-4-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
We were previously enforcing that all flat union branches were
found in the corresponding enum, but not that all enum values
were covered by branches. The resulting generated code would
abort() if the user passes the uncovered enum value.
We don't automatically treat non-present branches in a flat
union as empty types, for symmetry with simple unions (there,
the enum type is generated from the list of all branches, so
there is no way to omit a branch but still have it be part of
the union).
A later patch will add shorthand so that branches that are empty
in flat unions can be declared as 'branch':{} instead of
'branch':'Empty', to avoid the need for an otherwise useless
explicit empty type. [Such shorthand for simple unions is a bit
harder to justify, since we would still have to generate a
wrapper type that parses 'data':{}, rather than truly being an
empty branch with no additional siblings to the 'type' member.]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-3-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
This way we no longer need NetClientOptions and can convert Netdev
into a flat union.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <93ffdfed7054529635e6acb935150d95dc173a12.1441627176.git.DirtY.iCE.hu@gmail.com>
[rework net_client_init1() to pass Netdev by copying from NetdevLegacy,
rather than merging the two types - which means that we still need
NetClientOptions after all. Rebase to qapi changes. The bulk of the
patch is mechanical, replacing 'opts' by 'netdev->opts', while
net_client_init1() takes care of converting between legacy and modern
types.]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-2-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
This saves a lot of memory compared to a statically-sized array,
or at least 24kb could be considered a lot on an Atari ST.
It also makes the code more similar to QmpOutputVisitor.
This removes the limit on the depth of a QObject that can be processed
into a QAPI tree. This is not a problem because QObjects can be
considered trusted; the text received on the QMP wire is untrusted
input, but the JSON parser already takes pains to limit the QObject tree
it creates. We don't need the QMP input visitor to limit it again.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1467906798-5312-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message typo fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
This saves a little memory compared to the doubly-linked QTAILQ.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1467906798-5312-2-git-send-email-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Comment tweaked to avoid long line]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
# gpg: Signature made Mon 18 Jul 2016 23:53:15 BST
# gpg: using RSA key 0x7DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jnsnow/tags/ide-pull-request:
block: ignore flush requests when storage is clean
tests: in IDE and AHCI tests perform DMA write before flushing
ide: set retry_unit for PIO and FLUSH requests
ide: refactor retry_unit set and clear into separate function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
# gpg: Signature made Mon 18 Jul 2016 22:59:55 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace: Add QAPI/QMP interfaces to query and control per-vCPU tracing state
trace: Allow event name pattern in "info trace-events"
trace: Conditionally trace events based on their per-vCPU state
trace: Add per-vCPU tracing states for events with the 'vcpu' property
trace: Cosmetic changes on fast-path tracing
disas: Remove unused macro '_'
trace: Identify events with the 'vcpu' property
trace: [bsd-user] Commandline arguments to control tracing
trace: [linux-user] Commandline arguments to control tracing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
VFIO update 2016-07-18
One fix for 2.7-rc0 which hides the ARI extended capability, fixing
multifunction support in PCIe configurations where the assigned device
function topology does not match the host (Alex Williamson)
# gpg: Signature made Mon 18 Jul 2016 18:02:27 BST
# gpg: using RSA key 0x239B9B6E3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg: aka "Alex Williamson <alex@shazbot.org>"
# gpg: aka "Alex Williamson <alwillia@redhat.com>"
# gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>"
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22
* remotes/awilliam/tags/vfio-update-20160718.0:
vfio/pci: Hide ARI capability
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
'HF_SOFTMMU_MASK' is only set when 'CONFIG_SOFTMMU' is defined. So
there's no need in this flag: test 'CONFIG_SOFTMMU' instead.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160715175852.30749-6-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
until now the allocation map was used only as a hint if a cluster
is allocated or not. If a block was not allocated (or Qemu had
no info about the allocation status) a get_block_status call was
issued to check the allocation status and possibly avoid
a subsequent read of unallocated sectors. If a block known to be
allocated the get_block_status call was omitted. In the other case
a get_block_status call was issued before every read to avoid
the necessity for a consistent allocation map. To avoid the
potential overhead of calling get_block_status for each and
every read request this took only place for the bigger requests.
This patch enhances this mechanism to cache the allocation
status and avoid calling get_block_status for blocks where
the allocation status has been queried before. This allows
for bypassing the read request even for smaller requests and
additionally omits calling get_block_status for known to be
unallocated blocks.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1468831940-15556-3-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
when setting clusters as alloacted the boundaries have
to be expanded. As Paolo pointed out the calculation of
the number of clusters is wrong:
Suppose cluster_sectors is 2, sector_num = 1, nb_sectors = 6:
In the "mark allocated" case, you want to set 0..8, i.e.
cluster_num=0, nb_clusters=4.
0--.--2--.--4--.--6--.--8
<--|_________________|--> (<--> = expanded)
Instead you are setting nb_clusters=3, so that 6..8 is not marked.
0--.--2--.--4--.--6--.--8
<--|______________|!!! (! = wrong)
Cc: qemu-stable@nongnu.org
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1468831940-15556-2-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the README file to markdown so that it makes the github page look
prettier. I know that github repo is a mirror and not the official
repo, but I think it doesn't hurt to have it in markdown format.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20160715043111.29007-1-bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Some guests (win2008 server for example) do a lot of unnecessary
flushing when underlying media has not changed. This adds additional
overhead on host when calling fsync/fdatasync.
This change introduces a write generation scheme in BlockDriverState.
Current write generation is checked against last flushed generation to
avoid unnessesary flushes.
The problem with excessive flushing was found by a performance test
which does parallel directory tree creation (from 2 processes).
Results improved from 0.424 loops/sec to 0.432 loops/sec.
Each loop creates 10^3 directories with 10 files in each.
This affected some blkdebug testcases that were expecting error logs from
failure-injected flushes which are now skipped entirely
(tests 026 071 089).
This also affects the performance of block jobs and thus BLOCK_JOB_READY
events for driver-mirror and active block-commit commands now arrives
faster, before QMP send successfully returns to caller (tests 141 144).
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-5-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Due to changes in flush behaviour clean disks stopped generating
flush_to_disk events and IDE and AHCI tests that test flush commands
started to fail.
This change adds additional DMA writes to affected tests before sending
flush commands so that bdrv_flush actually generates flush_to_disk event.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-4-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
The following sequence of tests discovered a problem in IDE emulation:
1. Send DMA write to IDE device 0
2. Send CMD_FLUSH_CACHE to same IDE device which will be failed by block
layer using blkdebug script in tests/ide-test:test_retry_flush
When doing DMA request ide/core.c will set s->retry_unit to s->unit in
ide_start_dma. When dma completes ide_set_inactive sets retry_unit to -1.
After that ide_flush_cache runs and fails thanks to blkdebug.
ide_flush_cb calls ide_handle_rw_error which asserts that s->retry_unit
== s->unit. But s->retry_unit is still -1 after previous DMA completion
and flush does not use anything related to retry.
This patch restricts retry unit assertion only to ops that actually use
retry logic.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-3-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Code to set and clear state associated with retry in moved into
ide_set_retry and ide_clear_retry to make adding retry setups easier.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-2-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Homogenizes the command capabilities with QMP.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Events with the 'vcpu' property are conditionally emitted according to
their per-vCPU state. Other events are emitted normally based on their
global tracing state.
Note that the per-vCPU condition check applies to all tracing backends.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic
tracing state of events with the 'vcpu' property.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Eliminates a future compilation error when UI code includes the tracing
headers (indirectly pulling "disas/bfd.h" through "qom/cpu.h") and
GLib's i18n '_' macro.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
A new event attribute 'cpu_id' is added to have a separate ID
space ('TRACE_VCPU_*') for all events with the 'vcpu' property.
These are later used to identify which events are enabled on each vCPU.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
[Changed const char *trace_file to char *trace_file since it's a
heap-allocated string that needs to be freed. This type is also
returned by trace_opt_parse() and used in vl.c.
Also fixed coding style on for(;;) and else statement as suggested by
Eric Blake <eblake@redhat.com> since the patch modifies these lines or
close enough.
--Stefan]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146860252322.30668.18276041739086338328.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
[Changed const char *trace_file to char *trace_file since it's a
heap-allocated string that needs to be freed. This type is also
returned by trace_opt_parse() and used in vl.c.
--Stefan]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146860251784.30668.17339867835129075077.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
staging
# gpg: Signature made Mon 18 Jul 2016 17:58:27 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
MAINTAINERS: Add include/block/aio.h to block I/O path section
virtio-blk: dataplane cleanup
checkpatch: consider git extended headers valid patches
aio-posix: remove useless parameter
linux-aio: prevent submitting more than MAX_EVENTS
aio_ctx_check: follow CODING_STYLE
linux-aio: share one LinuxAioState within an AioContext
spec/parallels: fix a mistake
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
QEMU supports ARI on downstream ports and assigned devices may support
ARI in their extended capabilities. The endpoint ARI capability
specifies the next function, such that the OS doesn't need to walk
each possible function, however this next function is relative to the
host, not the guest. This leads to device discovery issues when we
combine separate functions into virtual multi-function packages in a
guest. For example, SR-IOV VFs are not enumerated by simply probing
the function address space, therefore the ARI next-function field is
zero. When we combine multiple VFs together as a multi-function
device in the guest, the guest OS identifies ARI is enabled, relies on
this next-function field, and stops looking for additional function
after the first is found.
Long term we should expose the ARI capability to the guest to enable
configurations with more than 8 functions per slot, but this requires
additional QEMU PCI infrastructure to manage the next-function field
for multiple, otherwise independent devices. In the short term,
hiding this capability allows equivalent functionality to what we
currently have on non-express chipsets.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
|
|
We want the travis build bot to post notifications on IRC only for the
master qemu repository and not the various forks/branches of
others. Currently there is no direct option to restrict the updates to
one repository. This is being worked upon by the developers and
tracked in https://github.com/travis-ci/travis-ci/issues/1094.
Until such time, we can use the workaround as posted in
ref. https://github.com/facebook/flow/pull/1822.
This basically creates an ecrypted string which decrypts to qemu IRC
channel only on "qemu/qemu" repo and not on the forks. This enables
the build bot to notify the IRC only for the main repo.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
This file is actually the header for async.c and aio-*.c., so add it to
the same section.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1468826387-10473-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
No need duplicate the judgment, there is one in function entry.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468814749-14510-1-git-send-email-caoj.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Renames look like this with git-diff(1) when diff.renames = true is set:
diff --git a/a b/b
similarity index 100%
rename from a
rename to b
This raises the "Does not appear to be a unified-diff format patch"
error because checkpatch.pl only considers a diff valid if it contains
at least one "@@" hunk.
This patch accepts renames and copies too so that checkpatch.pl exits
successfully when a diff only renames/copies files. The git diff
extended header format is described on the git-diff(1) man page.
Reported-by: Colin Lord <clord@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1468576014-28788-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Parameter **errp of aio_context_setup() is useless, remove it
and clean up the related code.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1468578524-23433-1-git-send-email-caoj.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
