aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-06-18scripts/qmp-shell: Apply flake8 rulesJohn Snow
A lot of fiddling around to get us below 80 columns. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210607200649.1840382-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qmp-shell: apply isort rulesJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210607200649.1840382-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qemu-ga-client: Add forwarder shimJohn Snow
Add a little forwarder shim until we are sure that everyone is comfortable with how to use the tools in their new packaged location. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210604155532.1499282-12-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18python/qemu-ga-client: add entry pointJohn Snow
Remove the shebang, and add a package-defined entry point instead. Now, it can be accessed using 'qemu-ga-client' from the command line after installing the package. The next commit adds a forwarder shim that allows the running of this script without needing to install the package again. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210604155532.1499282-11-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qemu-ga-client: move to python/qemu/qmp/qemu_ga_client.pyJohn Snow
The script itself will be unavailable for a few commits before being restored, with no way to run it right after this commit. This helps move git history into the new file. To prevent linter regressions, though, we do need to immediately touch up the filename to remove dashes (to make the module importable), and remove the executable bit. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210604155532.1499282-10-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qemu-ga-client: add mypy type hintsJohn Snow
This script is in slightly rough shape, but it still works. A lot of care went into its initial development. In good faith, I'm updating it to the latest Python coding standards. If there is in interest in this script, though, I'll be asking for a contributor to take care of it further. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210604155532.1499282-9-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18python/qmp: Correct type of QMPReturnValueJohn Snow
It's only a Dict[str, Any] most of the time. It's not actually guaranteed to be anything in particular. Fix this type to be more accurate to the reality we live in. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210604155532.1499282-8-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qemu-ga-client: apply (most) pylint rulesJohn Snow
I'm only doing a very quick best-effort to preserve this script, to help keep it from breaking further. I think there are pending ideas swirling on the right way to implement better SDKs and better clients, and this script might be a handy reference for those discussions. It presents some interesting design problems, like static type safety when using a dynamic RPC mechanism. I believe it's worth preserving the effort and care that went into making this script by updating it to work with our current infrastructure. However, I am disabling the requirement for docstrings in this file. If you would like to help improve this script, please add docstrings alongside any refactors or rejuvenations you might apply at that time. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210604155532.1499282-7-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qemu-ga-client: add module docstringJohn Snow
Turn that nice usage comment into a docstring. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210604155532.1499282-6-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qemu-ga-client: replace deprecated optparse with argparseJohn Snow
optparse isn't supported anymore, it's from the python2 days. Replace it with the mostly similar argparse. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210604155532.1499282-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qemu-ga-client: Fix exception handlingJohn Snow
Fixes: 50d189c These error classes aren't available anymore. Fix the bitrot. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210604155532.1499282-4-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qemu-ga-client: apply (most) flake8 rulesJohn Snow
- Line length should be < 80 - You shouldn't perform unscoped imports except at the top of the module Notably, the sys.path hack creates problems with the import rule. This will be fixed later. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210604155532.1499282-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qemu-ga-client: apply isort rulesJohn Snow
Hint: > ln -s scripts/qmp/qemu-ga-client python/qemu/qmp/qemu_ga_client.py > cd python > isort qemu Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210604155532.1499282-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18python/qmp: add fuse command to 'qom' toolsJohn Snow
The 'fuse' command will be unavailable if 'fusepy' is not installed. It will simply not load and subsequently be unavailable as a subcommand. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210603003719.1321369-20-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qom-fuse: add redirection shim to python/qemu/qmp/qom-fuse.pyJohn Snow
By leaving the script absent for a commit, git-blame travels to the new file instead of staying on the shim. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210603003719.1321369-19-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qom-fuse: move to python/qemu/qmp/qom_fuse.pyJohn Snow
Move qom-fuse over to the python package now that it passes the linter. Update the import paradigms so that it continues to pass in the context of the Python package. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18python: add optional FUSE dependenciesJohn Snow
In preparation for moving qom-fuse over to the python package, we need some new dependencies to support it. Add an optional 'fusepy' dependency that users of the package can opt into with e.g. "pip install qemu[fuse]" which installs the requirements necessary to obtain the additional functionality. Add the same fusepy dependency to the 'devel' extras group -- unfortunately I do not see a way for optional groups to imply other optional groups at present, so the dependency is repeated. The development group needs to include the full set of dependencies for the purpose of static analysis of all features offered by this library. Lastly, add the [fuse] extras group to tox's configuration as a workaround so that if a stale tox environment is found when running `make check-tox`, tox will know to rebuild its environments. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-17-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qom-fuse: add static type hintsJohn Snow
Because fusepy does not have type hints, add some targeted warning suppressions. Namely, we need to allow subclassing something of an unknown type (in qom_fuse.py), and we need to allow missing imports (recorded against fuse itself) because mypy will be unable to import fusepy (even when installed) as it has no types nor type stubs available. Note: Until now, it was possible to run invocations like 'mypy qemu/' from ./python and have that work. However, these targeted suppressions require that you run 'mypy -p qemu/' instead. The correct, canonical invocation is recorded in ./python/tests/mypy.sh and all of the various CI invocations always use this correct form. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-16-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qom-fuse: ensure QOMFuse.read always returns bytesJohn Snow
- Use FuseOSError to signal ENOENT instead of returning it - Wrap qom-get in str(), as we don't always know its type - The empty return should be b'', not ''. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210603003719.1321369-15-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qom-fuse: use QOMCommand.qom_list()John Snow
the qom_list method provides a type-safe object that's easier to type check, so switch to using it. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210603003719.1321369-14-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qom-fuse: Convert to QOMCommandJohn Snow
Move qom-fuse onto the QOMCommand base established in python/qemu/qmp/qom_common.py. The interface doesn't change incompatibly, "qom-fuse mountpoint" still works as an invocation, and QMP_SOCKET is still used as the environment variable. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-13-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qom-fuse: Add docstringsJohn Snow
The methods inherited from fuse don't need docstrings; that's up to fusepy to handle. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-12-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qom-fuse: Apply pylint rulesJohn Snow
- Catch specific exceptions from QMP - Reraise errors with explicit context - method parameters should match parent's names Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210603003719.1321369-11-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18python: Add 'fh' to known-good variable namesJohn Snow
fd and fh are fine: we often use these for "file descriptor" or "file handle" accordingly. It is rarely the case that you need to enforce a more semantically meaningful name beyond "This is the file we are using right now." While we're here: add comments for all of the non-standard pylint names. (And the underscore.) Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-10-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qom-fuse: apply flake8 rulesJohn Snow
flake8 still has one warning because of the sys.path hack, but that will be going away by the end of this patch series. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210603003719.1321369-9-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qom-fuse: apply isort rulesJohn Snow
Hint: you can use symlinks to create qom_fuse.py in python/qemu/qmp/ and point to scripts/qom-fuse to apply the standard linting rules to this script. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210603003719.1321369-8-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18scripts/qmp: redirect qom-xxx scripts to python/qemu/qmp/John Snow
Redirect to the new qom scripts. These forwarders can be deleted eventually when there has been more time for the dust on the Python packaging to settle and people understand how to find these commands. Note: You can run these by setting $PYTHONPATH in your shell and then running "python3 -m qemu.qmp.qom", or you can install the qemu namespace package and use the "qom" or "qom-set" scripts. I've written how to install the package elsewhere, but for the sake of git-blame, cd to ./python, and then do: - pip3 install [--user] [-e] . --user will install to your local user install (will not work inside of a venv), omitting this flag installs to your system-wide packages (outside of a venv) or to your current virtual environment (inside the venv). When installing to a venv or to your system-wide packages, "qom" should be in your $PATH already. If you do a user install, you may need to add ~/.local/bin to your $PATH if you haven't already. -e installs in editable mode: the installed package is effectively just a symlink to this folder; so changes to your git working tree are reflected in the installed package. Note: installing these packages to an environment outside a venv can be dangerous: Many QEMU scripts will begin to prefer the installed version instead of the version directly in the tree. Use with caution. editable mode is recommended when working outside of a venv. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210603003719.1321369-7-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18python/qmp: add qom script entry pointsJohn Snow
Add the 'qom', 'qom-set', 'qom-get', 'qom-list', and 'qom-tree' scripts to the qemu.qmp package. When you install this package, these scripts will become available on your command line. (e.g. when inside of a venv, `cd python && pip install .` will add 'qom', 'qom-set', etc to your $PATH.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210603003719.1321369-6-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18python/qmp: Add qom script rewritesJohn Snow
Inspired by qom-set, qom-get, qom-tree and qom-list; combine all four of those scripts into a single script. A later addition of qom-fuse as an 'extension' necessitates that some common features are split out and shared between them. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18python/qmp: add parse_address classmethodJohn Snow
This takes the place of qmp-shell's __get_address function. It also allows other utilities to share the same parser and syntax for specifying QMP locations. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-4-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18python/qmp: Fix type of SocketAddrTJohn Snow
In porting the qom tools, qmp-shell, etc; it becomes evident that this type is wrong. This is an integer, not a string. We didn't catch this before because none of QEMUMonitorProtocol's *users* happen to be checked, and the internal logic of this class is otherwise self-consistent. Additionally, mypy was not introspecting into the socket() interface to realize we were passing a bad type for AF_INET. Fixed now. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210603003719.1321369-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18python/pipenv: Update Pipfile.lockJohn Snow
In a previous commit, I added tox to the development requirements of the Python library. I never bothered to add them to the Pipfile, because they aren't needed there. Here, I sync it anyway in its own commit so that when we add new packages later that the diffstats will not confusingly appear to pull in lots of extra packages. Ideally I could tell Pipenv simply not to install these, but it doesn't seem to support that, exactly. The alternative is removing Tox from the development requires, which I'd rather not do. The other alternative is re-specifying all of the dependencies of setup.cfg in the Pipfile, which I'd also rather not do. Picking what feels least-worst here. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20210603003719.1321369-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-18Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/audio-20210617-pull-request' into staging audio: bugfix collection. # gpg: Signature made Thu 17 Jun 2021 13:40:56 BST # gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/audio-20210617-pull-request: coreaudio: Fix output stream format settings audio: Fix format specifications of debug logs hw/audio/sb16: Avoid assertion by restricting I/O sampling rate range jackaudio: avoid that the client name contains the word (NULL) audio: move code to audio/audio.c paaudio: remove unused stream flags alsaaudio: remove #ifdef DEBUG to avoid bit rot Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-17Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell
staging * avoid deprecation warnings for SASL on macOS 10.11 or newer * fix -readconfig when config blocks have an id (like [chardev "qmp"]) * Error* initialization fixes * Improvements to ESP emulation (Mark) * Allow creating noreserve memory backends (David) * Improvements to query-memdev (David) * Bump compiler to C11 (Richard) * First round of SVM fixes from GSoC project (Lara) # gpg: Signature made Wed 16 Jun 2021 16:37:49 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (45 commits) configure: Remove probe for _Static_assert qemu/compiler: Remove QEMU_GENERIC include/qemu/lockable: Use _Generic instead of QEMU_GENERIC util: Use unique type for QemuRecMutex in thread-posix.h util: Pass file+line to qemu_rec_mutex_unlock_impl util: Use real functions for thread-posix QemuRecMutex softfloat: Use _Generic instead of QEMU_GENERIC configure: Use -std=gnu11 target/i386: Added Intercept CR0 writes check target/i386: Added consistency checks for CR0 target/i386: Added consistency checks for VMRUN intercept and ASID target/i386: Refactored intercept checks into cpu_svm_has_intercept configure: map x32 to cpu_family x86_64 for meson hmp: Print "reserve" property of memory backends with "info memdev" qmp: Include "reserve" property of memory backends hmp: Print "share" property of memory backends with "info memdev" qmp: Include "share" property of memory backends qmp: Clarify memory backend properties returned via query-memdev hostmem: Wire up RAM_NORESERVE via "reserve" property util/mmap-alloc: Support RAM_NORESERVE via MAP_NORESERVE under Linux ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-17coreaudio: Fix output stream format settingsAkihiko Odaki
Before commit 7d6948cd98cf5ad8a3458a4ce7fdbcb79bcd1212, it was coded to retrieve the initial output stream format settings, modify the frame rate, and set again. However, I removed a frame rate modification code by mistake in the commit. It also assumes the initial output stream format is consistent with what QEMU expects, but that expectation is not in the code, which makes it harder to understand and will lead to breakage if the initial settings change. This change explicitly sets all of the output stream settings to solve these problems. Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-Id: <20210616141721.54091-1-akihiko.odaki@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-06-17audio: Fix format specifications of debug logsAkihiko Odaki
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-id: 20210616141411.53892-1-akihiko.odaki@gmail.com Message-Id: <20210616141411.53892-1-akihiko.odaki@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-06-17hw/audio/sb16: Avoid assertion by restricting I/O sampling rate rangePhilippe Mathieu-Daudé
While the SB16 seems to work up to 48000 Hz, the "Sound Blaster Series Hardware Programming Guide" limit the sampling range from 4000 Hz to 44100 Hz (Section 3-9, 3-10: Digitized Sound I/O Programming, tables 3-2 and 3-3). Later, section 6-15 (DSP Commands) is more specific regarding the 41h / 42h registers (Set digitized sound output sampling rate): Valid sampling rates range from 5000 to 45000 Hz inclusive. There is no comment regarding error handling if the register is filled with an out-of-range value. (See also section 3-28 "8-bit or 16-bit Auto-initialize Transfer"). Assume limits are enforced in hardware. This fixes triggering an assertion in audio_calloc(): #1 abort #2 audio_bug audio/audio.c:119:9 #3 audio_calloc audio/audio.c:154:9 #4 audio_pcm_sw_alloc_resources_out audio/audio_template.h:116:15 #5 audio_pcm_sw_init_out audio/audio_template.h:175:11 #6 audio_pcm_create_voice_pair_out audio/audio_template.h:410:9 #7 AUD_open_out audio/audio_template.h:503:14 #8 continue_dma8 hw/audio/sb16.c:216:20 #9 dma_cmd8 hw/audio/sb16.c:276:5 #10 command hw/audio/sb16.c:0 #11 dsp_write hw/audio/sb16.c:949:13 #12 portio_write softmmu/ioport.c:205:13 #13 memory_region_write_accessor softmmu/memory.c:491:5 #14 access_with_adjusted_size softmmu/memory.c:552:18 #15 memory_region_dispatch_write softmmu/memory.c:0:13 #16 flatview_write_continue softmmu/physmem.c:2759:23 #17 flatview_write softmmu/physmem.c:2799:14 #18 address_space_write softmmu/physmem.c:2891:18 #19 cpu_outw softmmu/ioport.c:70:5 [*] http://www.baudline.com/solutions/full_duplex/sb16_pci/index.html OSS-Fuzz Report: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=29174 Fixes: 85571bc7415 ("audio merge (malc)") Buglink: https://bugs.launchpad.net/bugs/1910603 Tested-by: Qiang Liu <cyruscyliu@gmail.com> Reviewed-by: Qiang Liu <cyruscyliu@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210616104349.2398060-1-f4bug@amsat.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-06-17jackaudio: avoid that the client name contains the word (NULL)Volker Rümelin
Currently with jackaudio client name and qemu guest name unset, the JACK client names are out-(NULL) and in-(NULL). These names are user visible in the patch bay. Replace the function call to qemu_get_vm_name() with a call to audio_application_name() which replaces NULL with "qemu" to have more descriptive names. Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-Id: <20210517194604.2545-4-vr_qemu@t-online.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-06-17audio: move code to audio/audio.cVolker Rümelin
Move the code to generate the pa_context_new() application name argument to a function in audio/audio.c. The new function audio_application_name() will also be used in the jackaudio backend. Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-Id: <20210517194604.2545-3-vr_qemu@t-online.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-06-17paaudio: remove unused stream flagsVolker Rümelin
In current code there are no calls to pa_stream_get_latency() or pa_stream_get_time() to receive latency or time information. Remove the flags PA_STREAM_INTERPOLATE_TIMING and PA_STREAM_AUTO_TIMING_UPDATE which instruct PulseAudio to calculate this information in regular intervals. Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-Id: <20210517194604.2545-2-vr_qemu@t-online.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-06-17alsaaudio: remove #ifdef DEBUG to avoid bit rotVolker Rümelin
Merge the #ifdef DEBUG code with the if statement a few lines above to avoid bit rot. Suggested-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-Id: <20210517194604.2545-1-vr_qemu@t-online.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-06-17Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-c11-20210615' ↵Peter Maydell
into staging Change to -std=gnu11. Replace QEMU_GENERIC with _Generic. Remove configure detect of _Static_assert. # gpg: Signature made Wed 16 Jun 2021 02:32:32 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth-gitlab/tags/pull-c11-20210615: configure: Remove probe for _Static_assert qemu/compiler: Remove QEMU_GENERIC include/qemu/lockable: Use _Generic instead of QEMU_GENERIC util: Use unique type for QemuRecMutex in thread-posix.h util: Pass file+line to qemu_rec_mutex_unlock_impl util: Use real functions for thread-posix QemuRecMutex softfloat: Use _Generic instead of QEMU_GENERIC configure: Use -std=gnu11 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-16Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20210616' into staging target-arm queue: * hw/intc/arm_gicv3_cpuif: Tolerate spurious EOIR writes * handle some UNALLOCATED decode cases correctly rather than asserting * hw: virt: consider hw_compat_6_0 * hw/arm: add quanta-gbs-bmc machine * hw/intc/armv7m_nvic: Remove stale comment * target/arm: Fix mte page crossing test * hw/arm: quanta-q71l add pca954x muxes * target/arm: First few parts of MVE support # gpg: Signature made Wed 16 Jun 2021 14:34:49 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210616: (25 commits) include/qemu/int128.h: Add function to create Int128 from int64_t bitops.h: Provide hswap32(), hswap64(), wswap64() swapping operations target/arm: Move expand_pred_b() data to vec_helper.c target/arm: Add framework for MVE decode target/arm: Implement MVE LETP insn target/arm: Implement MVE DLSTP target/arm: Implement MVE WLSTP insn target/arm: Implement MVE LCTP target/arm: Let vfp_access_check() handle late NOCP checks target/arm: Add handling for PSR.ECI/ICI target/arm: Handle VPR semantics in existing code target/arm: Enable FPSCR.QC bit for MVE target/arm: Provide and use H8 and H1_8 macros hw/arm: quanta-q71l add pca954x muxes hw/arm: gsj add pca9548 hw/arm: gsj add i2c comments target/arm: Fix mte page crossing test hw/intc/armv7m_nvic: Remove stale comment hw/arm: quanta-gbs-bmc add i2c comments hw/arm: add quanta-gbs-bmc machine ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-16include/qemu/int128.h: Add function to create Int128 from int64_tPeter Maydell
int128_make64() creates an Int128 from an unsigned 64 bit value; add a function int128_makes64() creating an Int128 from a signed 64 bit value. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210614151007.4545-34-peter.maydell@linaro.org
2021-06-16bitops.h: Provide hswap32(), hswap64(), wswap64() swapping operationsPeter Maydell
Currently the ARM SVE helper code defines locally some utility functions for swapping 16-bit halfwords within 32-bit or 64-bit values and for swapping 32-bit words within 64-bit values, parallel to the byte-swapping bswap16/32/64 functions. We want these also for the ARM MVE code, and they're potentially generally useful for other targets, so move them to bitops.h. (We don't put them in bswap.h with the bswap* functions because they are implemented in terms of the rotate operations also defined in bitops.h, and including bitops.h from bswap.h seems better avoided.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210614151007.4545-17-peter.maydell@linaro.org
2021-06-16target/arm: Move expand_pred_b() data to vec_helper.cPeter Maydell
For MVE, we want to re-use the large data table from expand_pred_b(). Move the data table to vec_helper.c so it is no longer in an SVE specific source file. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210614151007.4545-14-peter.maydell@linaro.org
2021-06-16target/arm: Add framework for MVE decodePeter Maydell
Add the framework for decoding MVE insns, with the necessary new files and the meson.build rules, but no actual content yet. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210614151007.4545-11-peter.maydell@linaro.org
2021-06-16target/arm: Implement MVE LETP insnPeter Maydell
Implement the MVE LETP insn. This is like the existing LE loop-end insn, but it must perform an FPU-enabled check, and on loop-exit it resets LTPSIZE to 4. To accommodate the requirement to do something on loop-exit, we drop the use of condlabel and instead manage both the TB exits manually, in the same way we already do in trans_WLS(). The other MVE-specific change to the LE insn is that we must raise an INVSTATE UsageFault insn if LTPSIZE is not 4. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210614151007.4545-10-peter.maydell@linaro.org
2021-06-16target/arm: Implement MVE DLSTPPeter Maydell
Implement the MVE DLSTP insn; this is like the existing DLS insn, except that it must do an FPU access check and it sets LTPSIZE to the value specified in the insn. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210614151007.4545-9-peter.maydell@linaro.org
2021-06-16target/arm: Implement MVE WLSTP insnPeter Maydell
Implement the MVE WLSTP insn; this is like the existing WLS insn, except that it specifies a size value which is used to set FPSCR.LTPSIZE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210614151007.4545-8-peter.maydell@linaro.org
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-25 05:24:37 +0000