| Age | Commit message (Collapse) | Author |
|---|
|
Curerntly the pseries VIO device code contains quite a few explicit
uses of DO_UPCAST and plain C casts. This is (obviously) type unsafe,
and not the conventional way of doing things in the QOM model. This
patch converts the code to use the QOM convention of per-type macros
to do verified casts with OBJECT_CHECK().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
For PAPR guests, KVM tracks the various areas registered with the
H_REGISTER_VPA hypercall. For full emulation, of course, these are tracked
within qemu. At present these values are not synchronized. This is a
problem for reset (qemu's reset of the VPA address is not pushed to KVM)
and will also be a problem for savevm / migration.
The kernel now supports accessing the VPA state via the ONE_REG interface,
this patch adds code to qemu to use that interface to keep the qemu and
KVM ideas of the VPA state synchronized.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Under certain circumstances the emulation for the pseries "XICS" interrupt
controller was clearing a pending interrupt from the XISR register, without
also clearing the corresponding priority variable. This will cause
problems later when can trigger sanity checks in the under-development
in-kernel XICS implementation.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
In addition to the performance monitor registers found on nearly all
6xx chips, the POWER7 has two additional counters (PMC5 & PMC6) and an
extra control register (MMCRA). This patch adds stub support for them to
qemu - the registers won't do anything, but with this change won't cause
illegal instruction traps accessing them. They're also registered with
their ONE_REG ids, so their value will be kept in sync with KVM where
appropriate.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
PAPR requires that the device tree's CPU nodes have several properties
with information about the L1 cache. We already create two of these
properties, but with incorrect names - "[id]cache-block-size" instead
of "[id]-cache-block-size" (note the extra hyphen).
We were also missing some of the required cache properties. This
patch adds the [id]-cache-line-size properties (which have the same
values as the block size properties in all current cases). We also
add the [id]-cache-size properties.
Adding the cache sizes requires some extra infrastructure in the
general target-ppc code to (optionally) set the cache sizes for
various CPUs. The CPU family descriptions in translate_init.c can set
these sizes - this patch adds correct information for POWER7, I'm
leaving other CPU types to people who have a physical example to
verify against. In addition, for -cpu host we take the values
advertised by the host (if available) and use those to override the
information based on PVR.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
For the pseries machine, we need to advertise to the guest the size of its
RMA - that is the amount of memory it can access with the MMU off. For HV
KVM, this is constrained by the hardware limitations on the virtual RMA of
one hash PTE per PTE group in the hash page table. We already had code to
calculate this, but it was assuming the VRMA page size was the same as the
(host) backing page size for guest RAM.
In the case of a host kernel configured for 64k base page size, but running
on hardware (or firmware) which only allows 4k pages, the hose will do all
its allocations with a 64k page size, but still use 4k hardware pages for
actual mappings. Usually that's transparent to things running under the
host, but in the case of the maximum VRMA size it's not.
This patch refines the RMA size calculation to instead use the largest
available hardware page size (as reported by the SMMU_INFO call) which is
less than or equal to the backing page size. This now gives the correct
RMA size in all cases I've tested.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
When using profiling, we rely on profile_getclock() being available
at our disposal. Somehow that function got moved from an indirect
include we used to have in translate-init.c, so that we were now
left not properly compiling anymore.
Add an explicit include to timer.h which defines profile_getclock,
so that we can compile again.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
On -M mac99, we can run 970 CPUs. However, these CPUs define the initial
instruction pointer they start execution at as part of their bootup protocol,
so effectively it's up to the board to decide where they start.
This went unnoticed, because they used to boot at the same location our flash
was mapped to, but due to the recent reset changes our 970 CPUs want to reset
to 0x100 now, which is always a 0 instruction.
Set the initial IP to something reasonable for -M mac99.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
|
|
Enable the KVM emulated watchdog if KVM supports (use the
capability enablement in watchdog handler). Also watchdog exit
(KVM_EXIT_WATCHDOG) handling is added.
Watchdog state machine is cleared whenever VM state changes to running.
This is to handle the cases like return from debug halt etc.
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
[agraf: rebase to current code base, fix non-kvm cases]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Based on kvm.git queue branch with commit e1e2e605.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Broken in b5a73f8d8a57e940f9bbeb399a9e47897522ee9a, the carry itself was
fixed in 79482e5ab38a05ca8869040b0d8b8f451f16ff62. But we still need to
produce the full 64-bit addition.
Simplify the conditions at the top of the functions for when we need a
new temporary. Only plain addition is important enough to warrent avoiding
the temporary, and the extra tcg move op that would come with it.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
According to the different user's manuals, the vector offset for system
reset (both /HRESET and /SRESET) is 0x00100.
This patch may break support of some executables, as the power-on start
address may change. For a specific board, if the power-on start address
is different than HRESET vector (i.e. 0x00000100 or 0xfff00100), this
should be fixed in board's initialization code.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The overflow computation of nego and subf*o instructions has been broken
in commit ffe30937. Contrary to other targets, the instruction is subtract
from an not subtract on PowerPC.
This patch fixes the issue by using the correct argument in the xor
computation. Thanks to Peter Maydell for the hint.
With this change the PPC emulation passes the Gwenole Beauchesne
testsuite again.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This value is not needed if we use correctly the MSR[IP] bit.
excp_prefix is always 0x00000000, except when the MSR[IP] bit is
implemented and set to 1, in that case excp_prefix is 0xfff00000.
The handling of MSR[IP] was already implemented but not used at reset
because the value of env->msr was changed "manually".
The patch uses the function hreg_store_msr() to set env->msr, this
ensures a good handling of MSR[IP] at reset, and therefore a good value
for excp_prefix.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Older KVM versions don't support EPR which breaks guests when we announce
MPIC variants that support EPR.
Catch that case and expose only MPIC version 2.0 which tells the guest that
we don't support the EPR capability yet.
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
[agraf: Add comment, route cap check through kvm_ppc.c]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
ISEL is a Power ISA 2.06 instruction and thus is available on POWER7.
Given this is trapped and emulated by the Linux kernel, I guess it went
unnoticed.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
# By Liu Yuan (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
sheepdog: fix loadvm operation
sheepdog: resend write requests when SD_RES_READONLY is received
sheepdog: add helper function to reload inode
sheepdog: add SD_RES_READONLY result code
sheepdog: cleanup find_vdi_name
rbd: Fix use after free in rbd_open()
block: Disable driver-specific options for 1.5
sheepdog: implement .bdrv_co_is_allocated()
sheepdog: use BDRV_SECTOR_SIZE
sheepdog: add discard/trim support for sheepdog
block/ssh: Require libssh2 >= 1.2.8.
Message-id: 1366976682-10251-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
# By Ed Maste (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
bsd-user: Track change in FreeBSD SYSCTL(9) types
virtio: Fix compilation without CONFIG_VHOST_SCSI
qemu-doc: Option -ignore-environment removed.
s390x: use CONFIG_INT128 to detect __uint128_t
linux-user: fix compile error due to stray colon at end of #ifdef line
Message-id: 1366975563-16216-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Currently the 'loadvm' opertaion works as following:
1. switch to the snapshot
2. mark current working VDI as a snapshot
3. rely on sd_create_branch to create a new working VDI based on the snapshot
This works not the same as other format as QCOW2. For e.g,
qemu > savevm # get a live snapshot snap1
qemu > savevm # snap2
qemu > loadvm 1 # This will steally create snap3 of the working VDI
Which will result in following snapshot chain:
base <-- snap1 <-- snap2 <-- snap3
^
|
working VDI
snap3 was unnecessarily created and might be annoying users.
This patch discard the unnecessary 'snap3' creation. and implement
rollback(loadvm) operation to the specified snapshot by
1. switch to the snapshot
2. delete working VDI
3. rely on sd_create_branch to create a new working VDI based on the snapshot
The snapshot chain for above example will be:
base <-- snap1 <-- snap2
^
|
working VDI
Cc: qemu-devel@nongnu.org
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
When a snapshot is taken from out side of qemu (e.g. qemu-img
snapshot), write requests to the current vdi return SD_RES_READONLY.
In this case, the sheepdog block driver needs to update the current
inode to the latest one and resend the write requests.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This adds a helper function to update the current inode state with the
specified vdi object.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Sheepdog returns SD_RES_READONLY when qemu sends write requests to the
snapshot vdi. This adds the result code and makes sd_strerror() print
its error reason.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This makes 'filename' and 'tag' constant variables, and renames
'for_snapshot' to 'lock' to clear how it works.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Commit a9ccedc3 frees the QemuOpts for the driver-specific options
immediately, even though it still needs the filename string that is
contained there. This doesn't work. Move the deletion of the QemuOpts to
the end of the function where its content isn't needed any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
We don't want to commit to the API yet before everything is worked out.
Disable it for the 1.5 release. This commit is meant to be reverted
after the 1.5 release.
The disabling of the driver-specific options is achieved by applying the
old checks while parsing the command line.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The 'TRIM' command from VM that is to release underlying data storage for
better thin-provision is already supported by the Sheepdog.
This patch adds the TRIM support at QEMU part.
For older Sheepdog that doesn't support it, we return 0(success) to upper layer.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
libssh2 >= 1.2.8 is required to enable this block device (because
that version introduced the libssh2_session_handshake call).
Change the test to use pkg-config exclusively. If the user requests
--enable-libssh2 and the minimum version is not available, then the
following error is displayed:
$ ./configure --enable-libssh2
ERROR: libssh2 >= 1.2.8 required for --enable-libssh2
If --enable-libssh2 is not specified, then the feature is silently
disabled if sufficiently new libssh2 is not available.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Originally from Garrett Cooper in FreeBSD PR ports/155558
http://www.freebsd.org/cgi/query-pr.cgi?pr=155558
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Has been removed in commit fc9c54124d134dbd76338a92a91804dab2df8166.
Signed-off-by: Thomas Schwinge <thomas@codesourcery.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Target s390x uses ad-hoc macro magic to guess if the compiler
supports the GCC extension __uint128_t. This patch uses the
the dedicated macro CONFIG_INT128 defined by configure instead.
This fixes compilation with the CIL source code analyzer, which
uses GCC as a preprocessor but does not support __uint128_t.
Signed-off-by: Gabriel Kerneis <gabriel@kerneis.info>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Remove a stray colon from the end of a #ifdef line. Some versions
of gcc complain about this:
linux-user/syscall.c: In function ‘do_syscall’:
linux-user/syscall.c:7606:28: error: extra tokens at end of #ifdef directive [-Werror]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Configurable at CPU synthesis/instantiation.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
Build DTC as QEMU is built. Fixes the issue with mingw build which can't
handles DTC's default CFLAGS.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
The submodule DTC should just build and use DTC as static (the whole
motivation for using submod is lack of widespread distro support).
The .so causes build failures on some platforms, so adjust the make
target to just build the static lib.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
# By Amos Kong
# Via Luiz Capitulino
* luiz/queue/qmp:
monitor: introduce query-command-line-options
Message-id: 1366922656-32545-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
While reviewing some patches I found this problem where tcp_chr_accept
does not clear listen_tag when returning FALSE, leading to a double
g_source_remove of the underlying source. Not really a problem unless the id
gets re-used in between, but still something we should fix.
While at it I've also reviewed all the other code in qemu-char.c for
similar problems and found that pty_chr_timer has the same problem.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1366890782-10311-1-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
sys/param.h was included to define __FreeBSD_version, but the conditional
using it was removed by commit d05ef160453e98546a4197496dc8a3cb2defac53
(Brad Smith, "Allow clock_gettime() monotonic clock to be utilized on more
OS's"), so the include is no longer needed here.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1366906631-2680-1-git-send-email-emaste@freebsd.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
So users get a notification instead of a crash.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
We don't have multiple DisplayStates any more,
so passing it in as argument is not needed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
... so it works with fdset.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Look up the QemuConsole for a given device, using the new link.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
So it is possible to figure which qemu console displays which device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Just the minimal bits to turn QemuConsoles into Objects.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Libvirt has no way to probe if an option or property is supported,
This patch introduces a new qmp command to query command line
option information. hmp command isn't added because it's not needed.
Signed-off-by: Amos Kong <akong@redhat.com>
CC: Luiz Capitulino <lcapitulino@redhat.com>
CC: Osier Yang <jyang@redhat.com>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
If a guest neglected to register (secondary) indicators but still runs
with notifications enabled, we might end up writing to guest zero;
avoid this by checking for valid indicators and only writing to the
guest and generating an interrupt if indicators have been setup.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
