aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-22coroutine: trim down nesting level in perf_nesting testPaolo Bonzini
20000 nested coroutines require 20 GB of virtual address space. Only nest 1000 of them so that the test (only enabled with "-m perf" on the command line) runs on 32-bit machines too. Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-22coroutine: move pooling to common codePaolo Bonzini
The coroutine pool code is duplicated between the ucontext and sigaltstack backends, and absent from the win32 backend. But the code can be shared easily by moving it to qemu-coroutine.c. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-22qemu-iotests: Test qcow2 image creation optionsKevin Wolf
Just create lots of images and try out each of the creation options that qcow2 provides (except backing_file/fmt for now) I'm not totally happy with the behaviour of qemu-img in each of the cases, but let's be explicit and update the test when we do change things later. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-22qemu-iotests: Add qemu-img compare testMiroslav Rezanina
Simple test for qemu-img compare to check it's working correctly. Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22qemu-img: Add compare subcommandMiroslav Rezanina
This patch adds new qemu-img subcommand that compares content of two disk images. Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22qemu-img: Add "Quiet mode" optionMiroslav Rezanina
There can be a need to turn output to stdout off. This patch adds a -q option that enable "Quiet mode". In Quiet mode, only errors are printed out. Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22block: Add synchronous wrapper for bdrv_co_is_allocated_aboveMiroslav Rezanina
There's no synchronous wrapper for bdrv_co_is_allocated_above function so it's not possible to check for sector allocation in an image with a backing file. Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22block: refuse negative iops and bps valuesStefan Hajnoczi
Negative I/O throttling iops and bps values do not make sense so reject them with an error message. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22block: use Error in do_check_io_limits()Stefan Hajnoczi
The do_check_io_limits() function returns false when I/O limits are invalid but it doesn't set an Error to indicate why. The two do_check_io_limits() callers duplicate error reporting. Solve this by passing an Error pointer into do_check_io_limits(). Note that the two callers report slightly different errors: drive_init() prints a custom error message while qmp_block_set_io_throttle() does error_set(errp, QERR_INVALID_PARAMETER_COMBINATION). QERR_INVALID_PARAMETER_COMBINATION is a generic error, see include/qapi/qmp/qerror.h: #define QERR_INVALID_PARAMETER_COMBINATION \ ERROR_CLASS_GENERIC_ERROR, "Invalid parameter combination" Since it is generic we are not obliged to keep this error. Switch to the custom error message which contains more information. This patch prepares for adding additional checks with their own error messages to do_check_io_limits(). The next patch adds a new check. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22qcow2: support compressed clusters in BlockFragInfoStefan Hajnoczi
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22qemu-img: add compressed clusters to BlockFragInfoStefan Hajnoczi
Show how many clusters are compressed. This can be used to monitor how many compressed clusters remain and whether to recompress the image. Suggested-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22qemu-img: fix missing space in qemu-img check outputStefan Hajnoczi
The qemu-img check fragmentation printf() is missing a space before the '=' sign. The human output is not guaranteed to be stable and we are not aware of screen scrapers, so add the missing space. Also fix the missing indentation of the printf() arguments. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22qcow2: record fragmentation statistics during checkStefan Hajnoczi
The qemu-img check command can display fragmentation statistics: * Total number of clusters in virtual disk * Number of allocated clusters * Number of fragmented clusters This patch adds fragmentation statistics support to qcow2. Compressed and normal clusters count as allocated. Zero clusters are not counted as allocated unless their L2 entry has a non-zero offset (e.g. preallocation). Only the current L1 table counts towards the statistics - snapshots are ignored. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22qcow2: introduce check_refcounts_l1/l2() flagsStefan Hajnoczi
The check_refcounts_l1/l2() functions have a check_copied argument to check that the QCOW_O_COPIED flag is consistent with refcount == 1. This should be a bool, not an int. However, the next patch introduces qcow2 fragmentation statistics and also needs to pass an option to check_refcounts_l1/l2(). This is a good opportunity to use an int flags field. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22qemu-img: add json output option to the check commandFederico Simoncelli
This option --output=[human|json] makes qemu-img check output a human or JSON representation at the choice of the user. Signed-off-by: Federico Simoncelli <fsimonce@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-22qemu-img: find the image end offset during checkFederico Simoncelli
This patch adds the support for reporting the image end offset (in bytes). This is particularly useful after a conversion (or a rebase) where the destination is a block device in order to find the first unused byte at the end of the image. Signed-off-by: Federico Simoncelli <fsimonce@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-22ui/gtk: require at least GTK 2.18 and VTE 0.26Anthony Liguori
This gives us the bare amount of features we need. We can add work arounds for older versions and lower the requirement but this should be a good starting point. Suggested-by: Daniel Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> --- v1 -> v2 - tremendous simplification suggested by danpb
2013-02-22unbreak hw/usb/redirect.c buildGerd Hoffmann
Commit 8550a02d1239415342959f6a32d178bc05c557cc added a streams parameter to usb_wakeup and didn't update redirect.c. Fix it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-22ui/gtk: Fix build (missing include for setlocale)Stefan Weil
At least for Ubuntu Linux locale.h is needed. Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-id: 1361514481-26164-1-git-send-email-sw@weilnetz.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21gtk: suppress accelerators from the File menu when grab is activeAnthony Liguori
If you're full screen, you probably expect Ctrl-Q to go to the guest, not the host. I think restricting certain menus is the right way to handle this generally speaking. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-10-git-send-email-aliguori@us.ibm.com
2013-02-21gtk: make default UI (v5)Anthony Liguori
A user can still enable SDL with '-sdl' or '-display sdl' but start making the default display GTK by default. I'd also like to deprecate the SDL display and remove it in a few releases. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-9-git-send-email-aliguori@us.ibm.com
2013-02-21gtk: add translation support (v5)Anthony Liguori
This includes a de_DE translation from Kevin Wolf and an it translation from Paolo Bonzini. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-8-git-send-email-aliguori@us.ibm.com
2013-02-21gtk: add support for screen scaling and full screen (v5)Anthony Liguori
Basic menu items to enter full screen mode and zoom in/out. Unlike SDL, we don't allow arbitrary scaling based on window resizing. The current behavior with SDL causes a lot of problems for me. Sometimes I accidentally resize the window a tiny bit while trying to move it (Ubuntu's 1-pixel window decorations don't help here). After that, scaling is now active and if the screen changes size again, badness ensues since the aspect ratio is skewed. Allowing zooming by 25% in and out should cover most use cases. We can add a more flexible scaling later but for now, I think this is a more friendly behavior. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-7-git-send-email-aliguori@us.ibm.com
2013-02-21gtk: add support for input grabbing (v2)Anthony Liguori
There is a small deviation from SDL's behavior here. Instead of Ctrl+Alt triggering grab, we now use Ctrl-Alt-g to trigger grab. GTK will not accept Ctrl+Alt as an accelerator since it just consists of modifiers. Having grab as a proper accelerator is important as it allows a user to override the accelerator for accessibility purposes. We also are not automatically grabbing on left-click. Besides the inability to tie mouse clicks to an accelerator, I think this behavior is hard to discover and since it only happens depending on the guest state, it can lead to confusing behavior. This can be changed in the future if there's a strong resistence to dropping left-click-to-grab, but I think we're better off dropping it. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-6-git-send-email-aliguori@us.ibm.com
2013-02-21gtk: add virtual console support (v2)Anthony Liguori
This enables VteTerminal to be used to render the text consoles. VteTerminal is the same widget used by gnome-terminal which means it's VT100 emulation is as good as they come. It's also screen reader accessible, supports copy/paste, proper scrolling and most of the other features you would expect from a terminal widget. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-5-git-send-email-aliguori@us.ibm.com
2013-02-21ui: add basic GTK gui (v5)Anthony Liguori
This is minimalistic and just contains the basic widget infrastructure. The GUI consists of a menu and a GtkNotebook. To start with, the notebook has its tabs hidden which provides a UI that looks very similar to SDL with the exception of the menu bar. The menu bar allows a user to toggle the visibility of the tabs. Cairo is used for rendering. I used gtk-vnc as a reference. gtk-vnc solves the same basic problems as QEMU since it was originally written as a remote display for QEMU. So for the most part, the approach to rendering and keyboard handling should be pretty solid for GTK. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-4-git-send-email-aliguori@us.ibm.com
2013-02-21console: allow VCs to be overridden by UIAnthony Liguori
We want to expose VCs using a VteTerminal widget. We need access to provide our own CharDriverState in order to do this. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-3-git-send-email-aliguori@us.ibm.com
2013-02-21build: disable Wstrict-prototypesAnthony Liguori
GTK won't build with strict-prototypes due to gtkitemfactory.h: /* We use () here to mean unspecified arguments. This is deprecated * as of C99, but we can't change it without breaking compatibility. * (Note that if we are included from a C++ program () will mean * (void) so an explicit cast will be needed.) */ typedef void (*GtkItemFactoryCallback) (); Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-2-git-send-email-aliguori@us.ibm.com
2013-02-21qom/object.c: Allow itf cast with num_itfs = 0Peter Crosthwaite
num_interfaces only tells you how many interfaces the concrete child class has (as defined in the TypeInfo). This means if you have a child class which defines no interfaces of its own, but its parent has interfaces you cannot cast to those parent interfaces. Fixed changing the guard to check the class->interfaces list instead (which is a complete flattened list of implemented interfaces). Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: a8c2db3b9b1f3c4bb81aca352b69e33260f36545.1361246206.git.peter.crosthwaite@xilinx.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21qom/object.c: Reset interface list on inheritancePeter Crosthwaite
The QOM framework will attempt the recreate a classes interface list from scratch for each class. This means that a child class should zero out the list of interfaces when cloned from the parent class. Currently the list is memcpy()d from the parent to the child. As the interface list is just a pointer to a list, this means the parent and child will share the same list of interfaces. When the child inits, it will append its own interfaces to the parents list. This is incorrect as the parent should not pick up its childs interfaces. This actually causes an infinite loop at class init time, as the child will iterate through the parent interface list adding each itf to its own list(in type_initialize()). As the list is (erroneously) shared, the new interface instances for the child are appended to the parent, and the iterator never hits the tail and loops forever. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1f58d2b629d82865dbb2fd5ba8445854049c4382.1361246206.git.peter.crosthwaite@xilinx.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21vga: fix byteswapping.Gerd Hoffmann
In case host and guest endianness differ the vga code first creates a shared surface (using qemu_create_displaysurface_from), then goes patch the surface format to indicate that the bytes must be swapped. The switch to pixman broke that hack as the format patching isn't propagated into the pixman image, so ui code using the pixman image directly (such as vnc) uses the wrong format. Fix that by adding a byteswap parameter to qemu_create_displaysurface_from, so we'll use the correct format when creating the surface (and the pixman image) and don't have to patch the format afterwards. [ v2: unbreak xen build ] Cc: qemu-stable@nongnu.org Cc: mark.cave-ayland@ilande.co.uk Cc: agraf@suse.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1361349432-23884-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21Remove elderly top level TODO filePeter Maydell
The top level TODO file hasn't been touched since 2008, so it's now an unhelpful and out of date mix of things that have already been done, things that don't make sense any more and things which could in theory be done but are not in practice important enough (or we'd have done them some time in the last five years). Remove it. The bug tracking system is probably a better place to track TODO items if we want to do so. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1361377462-19816-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21help: add docs for multiqueue tap optionsJason Wang
Cc: Markus Armbruster <armbru@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-id: 1361354641-51969-1-git-send-email-jasowang@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21aio: support G_IO_HUP and G_IO_ERRStefan Hajnoczi
aio-posix.c could not take advantage of G_IO_HUP and G_IO_ERR because select(2) does not have equivalent events. Now that g_poll(3) is used we can support G_IO_HUP and G_IO_ERR. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-11-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21aio: convert aio_poll() to g_poll(3)Stefan Hajnoczi
AioHandler already has a GPollFD so we can directly use its events/revents. Add the int pollfds_idx field to AioContext so we can map g_poll(3) results back to AioHandlers. Reuse aio_dispatch() to invoke handlers after g_poll(3). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-10-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21aio: extract aio_dispatch() from aio_poll()Stefan Hajnoczi
We will need to loop over AioHandlers calling ->io_read()/->io_write() when aio_poll() is converted from select(2) to g_poll(2). Luckily the code for this already exists, extract it into the new aio_dispatch() function. Two small changes: * aio_poll() checks !node->deleted to avoid calling handlers that have been deleted. * Fix typo 'then' -> 'them' in aio_poll() comment. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-9-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21main-loop: drop rfds/wfds/xfds for goodStefan Hajnoczi
Now that all *_fill() and *_poll() functions use GPollFD we no longer need rfds/wfds/xfds or pollfds_from_select()/pollfds_to_select(). >From now on everything uses GPollFD. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-8-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21iohandler: switch to GPollFDStefan Hajnoczi
Convert iohandler_select_fill() and iohandler_select_poll() to use GPollFD instead of rfds/wfds/xfds. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-7-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21slirp: switch to GPollFDStefan Hajnoczi
Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21slirp: slirp/slirp.c coding style cleanupStefan Hajnoczi
The slirp glue code uses tabs in some places. Since the next patch will modify the file, convert tabs to spaces and fix checkpatch.pl issues. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-5-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21main-loop: switch POSIX glib integration to GPollFDStefan Hajnoczi
Convert glib file descriptor polling from rfds/wfds/xfds to GPollFD. The Windows code still needs poll_fds[] and n_poll_fds but they can now become local variables. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-4-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21main-loop: switch to g_poll() on POSIX hostsStefan Hajnoczi
Use g_poll(3) instead of select(2). Well, this is kind of a cheat. It's true that we're now using g_poll(3) on POSIX hosts but the *_fill() and *_poll() functions are still using rfds/wfds/xfds. We've set the scene to start converting *_fill() and *_poll() functions step-by-step until no more rfds/wfds/xfds users remain. Then we'll drop the temporary gpollfds_from_select() and gpollfds_to_select() functions and be left with native g_poll(2). On Windows things are a little crazy: convert from rfds/wfds/xfds to GPollFDs, back to rfds/wfds/xfds, call select(2), rfds/wfds/xfds back to GPollFDs, and finally back to rfds/wfds/xfds again. This is only temporary and keeps the Windows build working through the following patches. We'll drop this excessive conversion later and be left with a single GPollFDs -> select(2) -> GPollFDs sequence that allows Windows to use select(2) while the rest of QEMU only knows about GPollFD. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-3-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21main-loop: fix select_ret uninitialized variable warningStefan Hajnoczi
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-2-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21Merge remote-tracking branch 'kraxel/usb.78' into stagingAnthony Liguori
# By Gerd Hoffmann # Via Gerd Hoffmann * kraxel/usb.78: uas-uas: usb3 streams usb-xhci: usb3 streams usb-core: usb3 streams usb: fix endpoint descriptor ordering usb-redir: simplify packet copy usb: make usb_packet_copy operate on combined packets usb: add usb_ep_set_halted usb-host: remove usb_host_device_close usb-host: move legacy cmd line bits usb-storage: use scsi_req_enqueue return value allow disabling usb smartcard support make usb devices configurable fix scripts/make_device_config.sh usb: Makefile cleanup
2013-02-21Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
# By Alin Tomescu (1) and others # Via Stefan Hajnoczi * stefanha/trivial-patches: .gitignore: Ignore optionrom/*.asm ppc: fix bamboo >256MB RAM initialization in hw/ppc4xx_devs.c Add some missing qtest binaries to .gitignore xilinx_axienet.c: Assert no error when making link Remove forward declaration of non-existant variable
2013-02-21.gitignore: Ignore optionrom/*.asmCole Robinson
Signed-off-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-21ppc: fix bamboo >256MB RAM initialization in hw/ppc4xx_devs.cAlin Tomescu
I was trying to launch a PowerPC "bamboo" machine with more than 256MB of RAM with qemu-system-ppc -M bamboo -kernel $kernel -initrd $ramdisk -m 512, but QEMU would just hang. However, when I used -m 256, the machine would boot. I looked through the code in hw/ and it seems there is an error when the RAM memory is setup (if my understanding is correct). After patching it, the machine launched and booted successfully with 512MB of RAM. Signed-off-by: Alin Tomescu <tomescu.alin@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-21Add some missing qtest binaries to .gitignoreDavid Gibson
These binaries are generated during make check on at least some configurations, so att them to .gitignore. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-21xilinx_axienet.c: Assert no error when making linkPeter Crosthwaite
This gives an awful silent failure when it doesn't work. Assert against link creation failure. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-21Remove forward declaration of non-existant variableHervé Poussineau
This variable has been removed 5 years ago in 970ac5a3082428dca91171f270dcd95d6f4b2636. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>