aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-11-28nbd-server-add: Fix the default for 'writable'Michal Privoznik
The documentation to this monitor command tells, that 'writable' argument is optional and defaults to false. However, the code sets true as the default. But since some applications may already been using this, it's safer to fix the code and not documentation which would break those applications. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-28nbd: fix use of two uninitialized bytes when connecting to a named exportPaolo Bonzini
Reported-by: Michal Privoznik <mprivoznik@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-13nbd: fixes to read-only handlingPaolo Bonzini
We do not need BLKROSET if the kernel supports setting flags. Also, always do BLKROSET even for a read-write export, otherwise the read-only state remains "sticky" after the invocation of "qemu-nbd -r". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-12hmp: add NBD server commandsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-12nbd: disallow nbd-server-add before nbd-server-startPaolo Bonzini
It works nicely with the QMP commands, but it adds useless complication with HMP. In particular, see the following: (qemu) nbd_server_add -w scsi0-hd0 (qemu) nbd_server_start -a localhost:10809 NBD server already exporting device scsi0-hd0 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-12nbd: force read-only export for read-only devicesPaolo Bonzini
This is the desired behavior for HMP, but it is a better choice for QMP as well. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-12nbd: fix nbd_server_stop crash when no server was runningPaolo Bonzini
This failed on the new assertion of qemu_set_fd_handler2: qemu-system-x86_64: /home/pbonzini/work/upstream/qemu/iohandler.c:60: qemu_set_fd_handler2: Assertion `fd >= 0' failed. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-12nbd: accept URIsPaolo Bonzini
The URI syntax is consistent with the Gluster syntax. Export names are specified in the path, preceded by one or more (otherwise unused) slashes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-12nbd: accept relative path to Unix socketPaolo Bonzini
Adding the "is_unix" member now will simplify the parsing of NBD URIs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-12qemu-nbd: initialize main loop before block layerPaolo Bonzini
qemu-nbd was broken because they initialized the block layer while qemu_aio_context was still NULL. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-11tcg: properly check that op's output needs to be synced to memoryKirill Batuzov
Fix typo introduced in b3a1be87bac3a6aaa59bb88c1410f170dc9b22d5. Reported-by: Ruslan Savchenko <ruslan.savchenko@gmail.com> Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-11target-mips: Fix seg fault for LUI when MIPS_DEBUG_DISAS==1.Eric Johnson
The call to gen_logic_imm for OPC_LUI passes -1 for rs. This causes the MIPS_DEBUG statement to seg fault due to the deference of regnames[rs]. This patch fixes that. Signed-off-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> (aurel32: replaced static string formating by a static string)
2012-11-10target-i386: avoid using cpu_single_envBlue Swirl
Pass around CPUArchState instead of using global cpu_single_env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2012-11-10target-xtensa: avoid using cpu_single_envBlue Swirl
Pass around CPUArchState instead of using global cpu_single_env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2012-11-10target-unicore32: avoid using cpu_single_envBlue Swirl
Pass around CPUArchState instead of using global cpu_single_env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Reviewed-by: Andreas Färber <afaerber@suse.de>
2012-11-10kvm: avoid using cpu_single_envBlue Swirl
Pass around CPUArchState instead of using global cpu_single_env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2012-11-10disas: avoid using cpu_single_envBlue Swirl
Pass around CPUArchState instead of using global cpu_single_env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Acked-by: Richard Henderson <rth@twiddle.net> Acked-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2012-11-10slirp: remove unused function u_sleepBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-10sun4c: remove unused functionsBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-10m48t59: remove unused m48t59_set_addrBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-10tests/tcg: new test for i386 FPREM and FPREM1Catalin Patulea
This is setting the stage for a cleanup of FPREM and FPREM1 helpers while being sure that they behave same as bare metal. The test constructs operands using combinations of corner cases for the floating-point bitfields and prints operands, result and FPU status word for FPREM and FPREM1. The outputs can then be compared between bare metal and QEMU. The 'run-test-i386-fprem' make target does just that. Signed-off-by: Catalin Patulea <catalinp@google.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-10memory: Don't dump disabled regionsJan Kiszka
This makes "info mtree" output readable again. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-10memory: Reintroduce dirty flag to optimize changes on disabled regionsJan Kiszka
Cirrus is triggering this, e.g. during Win2k boot: Changes only on disabled regions require no topology update when transaction depth drops to 0 again. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-10qemu-timer: Fix compilation for non-POSIX hostsStefan Weil
A compiler warning is caused by the unused local function reinit_timers on non-POSIX hosts. Include that function only for POSIX hosts. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-10vmware_vga: Add back some info in local state partially reverting aa32b38cBALATON Zoltan
Keep saving display surface parameters at init and using these cached values instead of getting them when needed. Not sure why this is needed (maybe due to the interaction with the vga device) but not doing this broke the Xorg vmware driver at least. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-10kvmvapic: Fix TB invalidation after instruction patchingJan Kiszka
Since 0b57e287, cpu_memory_rw_debug already triggers a TB invalidation. As it doesn't (and cannot) set is_cpu_write_access=1 but "consumes" the currently executed TB, the tb_invalidate_phys_page_range call from patch_instruction didn't work anymore. Fix this by open-coding the required bits to restore the CPU state from the current TB position before patching and resume execution on the patched instruction afterward. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Tested-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-08microblaze: translate.c: Fix swaph decodingPeter Crosthwaite
The swaph instruction was not decoding correctly. s/1e1/1e2 on the 9 LSBs on the instruction decode. Reported-by: David Holsgrove <david.holsgrove@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-11-06tools: initialize main loop before block layerPaolo Bonzini
Tools were broken because they initialized the block layer while qemu_aio_context was still NULL. Reported-by: malc <av1474@comtv.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2012-11-06tcg/ppc32: Use trampolines to trim the code size for mmu slow path accessorsmalc
mmu access looks something like: <check tlb> if miss goto slow_path <fast path> done: ... ; end of the TB slow_path: <pre process> mr r3, r27 ; move areg0 to r3 ; (r3 holds the first argument for all the PPC32 ABIs) <call mmu_helper> b $+8 .long done <post process> b done On ppc32 <call mmu_helper> is: (SysV and Darwin) mmu_helper is most likely not within direct branching distance from the call site, necessitating a. moving 32 bit offset of mmu_helper into a GPR ; 8 bytes b. moving GPR to CTR/LR ; 4 bytes c. (finally) branching to CTR/LR ; 4 bytes r3 setting - 4 bytes call - 16 bytes dummy jump over retaddr - 4 bytes embedded retaddr - 4 bytes Total overhead - 28 bytes (PowerOpen (AIX)) a. moving 32 bit offset of mmu_helper's TOC into a GPR1 ; 8 bytes b. loading 32 bit function pointer into GPR2 ; 4 bytes c. moving GPR2 to CTR/LR ; 4 bytes d. loading 32 bit small area pointer into R2 ; 4 bytes e. (finally) branching to CTR/LR ; 4 bytes r3 setting - 4 bytes call - 24 bytes dummy jump over retaddr - 4 bytes embedded retaddr - 4 bytes Total overhead - 36 bytes Following is done to trim the code size of slow path sections: In tcg_target_qemu_prologue trampolines are emitted that look like this: trampoline: mfspr r3, LR addi r3, 4 mtspr LR, r3 ; fixup LR to point over embedded retaddr mr r3, r27 <jump mmu_helper> ; tail call of sorts And slow path becomes: slow_path: <pre process> <call trampoline> .long done <post process> b done call - 4 bytes (trampoline is within code gen buffer and most likely accessible via direct branch) embedded retaddr - 4 bytes Total overhead - 8 bytes In the end the icache pressure is decreased by 20/28 bytes at the cost of an extra jump to trampoline and adjusting LR (to skip over embedded retaddr) once inside. Signed-off-by: malc <av1474@comtv.ru>
2012-11-05target-mips: use ULL for 64 bit constantsBlue Swirl
Fix build on a 32 bit host: CC mips-softmmu/target-mips/dsp_helper.o /src/qemu/target-mips/dsp_helper.c: In function 'helper_dextr_rs_w': /src/qemu/target-mips/dsp_helper.c:3556: error: integer constant is too large for 'long' type /src/qemu/target-mips/dsp_helper.c: In function 'helper_extr_s_h': /src/qemu/target-mips/dsp_helper.c:3656: error: integer constant is too large for 'long' type Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-04build: pthread_atfork() needs include of pthread.hAnthony Liguori
Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-03tcg/ppc: ld/st optimizationmalc
Signed-off-by: malc <av1474@comtv.ru>
2012-11-03vmware_vga: Allow simple drivers to work without using the fifoBALATON Zoltan
Postpone stopping the dirty log to the point where the command fifo is configured to allow drivers which don't use the fifo to work too. (Without this the picture rendered into the vram never got to the screen and the DIRECT_VRAM option meant to support this case was removed a year ago.) Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-03vmware_vga: Return a value for FB_SIZE before the device is enabledBALATON Zoltan
According to the documentation drivers using this device should read FB_SIZE before enabling the device to know what memory to map. This would not work if we return 0 before enabled. The docs also mention reading SVGA_REG_DEPTH but not writing it. (Only SVGA_REG_BITS_PER_PIXEL can be written but we don't really support that either.) Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-03vmware_vga: Remove duplicated info from local stateBALATON Zoltan
Removed info from vmsvga_state that is available from elsewhere and thus was duplicated here unnecessarily. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-03vmware_vga: Coding style cleanupBALATON Zoltan
Fix coding style as suggested by checkpatch.pl Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-03Merge branch 'trivial-patches' of git://github.com/stefanha/qemuBlue Swirl
* 'trivial-patches' of git://github.com/stefanha/qemu: pc: Drop redundant test for ROM memory region exec: make some functions static target-ppc: make some functions static ppc: add missing static vnc: add missing static vl.c: add missing static target-sparc: make do_unaligned_access static m68k: Return semihosting errno values correctly cadence_uart: More debug information Conflicts: target-m68k/m68k-semi.c
2012-11-03tcg: Optimize qemu_ld/st by generating slow paths at the end of a blockYeongkyoon Lee
Add optimized TCG qemu_ld/st generation which locates the code of TLB miss cases at the end of a block after generating the other IRs. Currently, this optimization supports only i386 and x86_64 hosts. Signed-off-by: Yeongkyoon Lee <yeongkyoon.lee@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-03tcg: Add extended GETPC mechanism for MMU helpers with ldst optimizationYeongkyoon Lee
Add GETPC_EXT which is used by MMU helpers to selectively calculate the code address of accessing guest memory when called from a qemu_ld/st optimized code or a C function. Currently, it supports only i386 and x86-64 hosts. Signed-off-by: Yeongkyoon Lee <yeongkyoon.lee@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-03configure: Add CONFIG_QEMU_LDST_OPTIMIZATION for TCG qemu_ld/st optimizationYeongkyoon Lee
Enable CONFIG_QEMU_LDST_OPTIMIZATION for TCG qemu_ld/st optimization only when a host is i386 or x86_64. Signed-off-by: Yeongkyoon Lee <yeongkyoon.lee@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-03target-m68k/m68k-semi.c: Log when put_user for returning values failsPeter Maydell
Abstract out the use of put_user for returning semihosting call results, so that we can log when a guest erroneously attempts a semihosting call with an unwritable argument block. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-03target-m68k/m68k-semi: Handle get_user failurePeter Maydell
Handle failure of get_user accessing the semihosting argument block, rather than simply ignoring the failures. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-03m68k: Return semihosting errno values correctlyMeador Inge
Fixing a simple typo, s/errno/err/, that caused the error status from GDB semihosted system calls to be returned incorrectly. Signed-off-by: Meador Inge <meadori@codesourcery.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-02vl: delay thread initialization after daemonizationPaolo Bonzini
Commit ac4119c (chardev: Use timer instead of bottom-half to postpone open event, 2012-10-12) moved the alarm timer initialization to an earlier point but failed to consider that it depends on qemu_init_main_loop. Later, commit 1c53786 (vl: init main loop earlier, 2012-10-30) fixed this, but left -daemonize in two different ways. First, timers need to be reinitialized after forking. Second, the global mutex was being held by the parent, and thus dropped after forking. The first is now fixed using pthread_atfork. For the second part, make sure that the global mutex is not taken before daemonization, and similarly delay qemu_thread_self. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-02vl: unify calls to init_timer_alarmPaolo Bonzini
init_timer_alarm was being called twice. This is not needed. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-02qemu-timer: reinitialize timers after forkPaolo Bonzini
Timers are not inherited by the child of a fork(2), so just use pthread_atfork to reinstate them after daemonize. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-02semaphore: implement fallback counting semaphores with mutex+condvarPaolo Bonzini
OpenBSD and Darwin do not have sem_timedwait. Implement a fallback for them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-02compiler: support Darwin weak referencesPaolo Bonzini
Weakrefs only tell you if the symbol was defined elsewhere, so you need a further check at runtime to pick the default definition when needed. This could be automated by the compiler, but it does not do it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-02Merge remote-tracking branch 'bonzini/migr-coroutine' into stagingAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> * bonzini/migr-coroutine: migration: move process_incoming_migration to a coroutine migration: handle EAGAIN while reading QEMUFile migration: move qemu_fclose to process_incoming_migration migration: close socket QEMUFile from socket_close migration: xxx_close will only be called once migration: use closesocket, not close migration: use migrate_fd_close in migrate_fd_cleanup migration: clean up server sockets and handlers before invoking process_incoming_migration migration: replace qemu_stdio_fd with qemu_get_fd migration: add qemu_get_fd migration: consolidate QEMUFile methods in a single QEMUFileOps struct migration: unify stdio-based QEMUFile operations
2012-11-02Merge remote-tracking branch 'afaerber/qom-cpu' into stagingAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> * afaerber/qom-cpu: target-i386: cpu: fix --disable-kvm compilation