aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-07-12Sparc32: convert eccmemctl to qdevBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-12sparc64: fix helper_st_asi little endian case typoIgor Kovalenko
On Sun, Jul 12, 2009 at 12:43 AM, Stuart Brady<sdbrady@ntlworld.com> wrote: > On Sat, Jul 11, 2009 at 10:22:18PM +0400, Igor Kovalenko wrote: >> It is clear that intention is to byte-swap value to be written, not >> the target address. > > @@ -1949,13 +1949,13 @@ void helper_st_asi(target_ulong addr, ta >     case 0x89: // Secondary LE >         switch(size) { >         case 2: > -            addr = bswap16(addr); > +            addr = bswap16(val); >             ^^^^ > Shouldn't that be 'val = bswap16(val)' (and likewise for the 32-bit and > 64-bit cases)?  Also needs a 'signed-off-by:'... > > Cheers, > -- > Stuart Brady > Thanks, that part I did not runtime-tested. Not sure if those asi stores are of any use for user-mode emulator. Please find attached the corrected version. Signed-off-by: igor.v.kovalenko@gmail.com -- Kind regards, Igor V. Kovalenko
2009-07-12sparc64: really initialize irqIgor Kovalenko
Allocate irq just before passing it to pci bridge initialization and actually use it to initialize pci bridge. Signed-off-by: igor.v.kovalenko@gmail.com -- Kind regards, Igor V. Kovalenko
2009-07-12sparc64: unify mmu tag matching codeIgor Kovalenko
This patch extracts common part of sparc64 tag matching code used by IMMU and DMMU lookups. Signed-off-by: igor.v.kovalenko@gmail.com -- Kind regards, Igor V. Kovalenko
2009-07-12sparc64: mmu bypass mode correctionIgor Kovalenko
This Implement physical address truncation in mmu bypass mode. IMMU bypass is also active when cpu enters RED_STATE Signed-off-by: igor.v.kovalenko@gmail.com -- Kind regards, Igor V. Kovalenko
2009-07-11Fix PCI IRQ breakagePaul Brook
Zero initialize the PCI bus irq count. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-07-11Revert "Fix the PCI header type of APB"Blue Swirl
This reverts commit e8d2a88755b849bdadaf80d19e342eade3c017bc.
2009-07-11Fix APB by reverting 16eaedf2668e9b347a59d73346fcc4c764c58348 partiallyBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-10Indent ac97 and es1370 according to audio formattingAnthony Liguori
For the sake of consistency. I pulled in the wrong patches from Gerd when he did the qdev conversion. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10block: Clean up after deleting BHsAvi Kivity
Commit 6a7ad299 ("Call qemu_bh_delete at bdrv_aio_bh_cb") deletes emulated aio bottom halves to prevent endless accumulation. However, it leaves a stale ->bh pointer, which is then waited on when the aio is reused. Zeroing the pointer fixes the issue, allowing vmdk format images to be used. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10flush pending aio requestsGlauber Costa
When we finish migration, there may be pending async io requests in flight. If we don't flush it before stage3 starting, it might be the case that the guest loses it. Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10kvm: Work around borken MSR_GET_INDEX_LISTJan Kiszka
Allocate enough memory for KVM_GET_MSR_INDEX_LIST as older kernels shot far beyond their limits, corrupting user space memory. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10qemu/virtio: mark msi vectors used on loadMichael S. Tsirkin
Usage of msi vectors is controlled by the guest and so needs to be restored on load. Do this for msi vectors used by the virtio device. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10qemu/msi: missing bracesMichael S. Tsirkin
MSIX present bit is tested incorrectly, and only happens to work because the bit we are testing is 0x1. Add braces to fix this. Reported-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10qemu/msi: clean used vectors state on loadMichael S. Tsirkin
Clean up msix vector usage state on load. Since guest might have control over it through the device, the device will have to load this state from file. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10qcow2: Fix L1 table memory allocationKevin Wolf
Contrary to what one could expect, the size of L1 tables is not cluster aligned. So as we're writing whole sectors now instead of single entries, we need to ensure that the L1 table in memory is large enough; otherwise write would access memory after the end of the L1 table. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10qcow1: Fix qcow_aio_writevKevin Wolf
Pass is_write = 1 to qcow_aio_setup when writing. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10Prefer sysfs for USB host devicesMark McLoughlin
Scanning for devices via /sys/bus/usb/devices/ and using them via the /dev/bus/usb/<bus>/<device> character devices is the prefered method on modern kernels, so try that first. When using SELinux and libvirt, qemu will have access to /sys/bus/usb but not /proc/bus/usb, so although the current code will work just fine, it will generate SELinux AVC warnings. See also: https://bugzilla.redhat.com/508326 Reported-by: Daniel Berrange <berrange@redhat.com> Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10usb-ohci: Fix endianness issueMichael Buesch
This fixes a possible endianness issue in the usb-ohci hw module. hcca.frame and ohci->frame_number are 16bit, so use cpu_to_le16(). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10Make sure to mark MCE defines as ULLAnthony Liguori
Fixes build on 32-bit Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10qemu-io: fix memory leakKevin Wolf
qemu-io leaks the request buffer whenever the read or write function isn't executed completely down the "normal" code path. [hch: also fix the aio and vectored variants the same way] Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2009-07-10qemu-io: add flag to mark files growableChristoph Hellwig
Add a -g flag to the open command and the main qemu-io command line to allow opening a file growable. This is only allowed for protocols, mirroring the limitation exposed through bdrv_file_open. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2009-07-10qemu-io: better input validation for vector-based commandsChristoph Hellwig
Fix up a couple of issues with validating the input of the various length arguments for the vectored I/O commands: - do the alignment check on each length instead the always 0 count argument - use a long long varibale for the cvtnum return value so that we can check wether it wasn't a number - check for a too large argument instead of truncating it Also refactor it into a common helper for all four calers and avoid parsing the numbers twice. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2009-07-10qemu-io: small cleanups for the aio codeChristoph Hellwig
Address a couple of review comments from Kevin. Signed-off-by: Christoph Hellwig <hch@lst.de>
2009-07-09Disable kqemu by default at run timeAnthony Liguori
-no-kqemu -> -enable-kqemu kqemu is still present at compile time by default Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09Make sure to only vm_start() a failed migration if we were running to beginAnthony Liguori
with. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09Allow setting qemu process name v2Andi Kleen
Set the Linux process name to the name argument specified with name. I find this useful to see which guests are taking CPU time in top. This doesn't affect ps, which checks argv[0], but rewriting the environment uses much more code, so I only used this simple way. v2: Use separate process= argument, no prefixes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09configure: Append extra cflags and ldflagsJan Kiszka
In order to allow overriding flags that are set by configure, we have to append them instead of prepending as it is done so far. v2: Clarify documentation. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09qemu: remove control vector saveMichael S. Tsirkin
control vector is saved/restored by virtio-pci, it does not belong in virtio. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09fix segfault in msix_saveMichael S. Tsirkin
This fixes segfault reported by Kevin Wolf, and simplifies the code in msix_save. Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09Unregister savevm callback in eeprom93xx_free()Mark McLoughlin
Otherwise if you hot remove an eepro100 NIC and then migrate, you get: Unknown savevm section or instance 'eeprom' 0 on the destination side. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09Don't leak VLANClientState on PCI hot removeMark McLoughlin
destroy_nic() requires that NICInfo::private by a PCIDevice pointer, but then goes on to require that the same pointer matches VLANClientState::opaque. That is no longer the case for virtio-net since qdev and wasn't previously the case for rtl8139, ne2k_pci or eepro100. Make the situation a lot more clear by maintaining a VLANClientState pointer in NICInfo. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09Don't abort if TUNSETSNDBUF fails where no sndbuf= arg is suppliedMark McLoughlin
If no tap,sndbuf= arg is supplied, we use a default value. If TUNSETSNDBUF fails in this case, we should not abort. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09Substitute O_DSYNC with O_SYNC or O_FSYNC when needed.G 3
Signed-off-by: John Arbuckle <programmingkidx@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09Allow adjustment of http block device's readahead size, via a newNolan
":readahead=###:" suffix. Signed-off-by: Nolan Leake <nolan <at> sigbus.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09consolidate user cpu_{in, out}[bwl] into ioport-user.cIsaku Yamahata
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09ioport: consolidate duplicated logic in register_ioport_{read, write}().Isaku Yamahata
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09use constant IOPORTS_MASK instead of 0xffff.Isaku Yamahata
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09split out ioport related stuffs from vl.c into ioport.c.Isaku Yamahata
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09Replace signrom with shell script v3Alexander Graf
In order to not execute code we just compiled, let's replace signrom with a shell script that does the same thing while staying compatible to pretty much every system available. This should make cross-compilation for windows easier. aliguori: fix build when objdir != srcdir Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09Revert "support colon in filenames"Anthony Liguori
This reverts commit 707c0dbc97cddfe8d2441b8259c6c526d99f2dd8. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09Fix build for ESD audioAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09qcow2: Make cache=writethrough defaultKevin Wolf
The performance of qcow2 has improved meanwhile, so we don't need to special-case it any more. Switch the default to write-through caching like all other block drivers. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09net: set a default value for sndbuf=Mark McLoughlin
On reflection, perhaps it does make sense to set a default value for the sndbuf= tap parameter. For best effect, sndbuf= should be set to just below the capacity of the physical NIC. Setting it higher will cause packets to be dropped before the limit is hit. Setting it much lower will not cause any problems unless you set it low enough such that the guest cannot queue up new packets before the NIC has emptied its queue. In Linux, txqueuelen=1000 by default for ethernet NICs. Given a 1500 byte MTU, 1Mb is a good choice for sndbuf. If it turns out that txqueuelen is actually much lower than this, then sndbuf is essentially disabled. In the event that txqueuelen is much higher, it's unlikely that the NIC will be able to empty a 1Mb queue. Thanks to Herbert Xu for this logic. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Cc: Herbert Xu <herbert.xu@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09configure: detect xen with --extra-cflags / --extra-ldflagsChristoph Egger
Attached patch lets configure find xen headers and xen libs when called with --extra-cflags and --extra-ldflags options. Signed-off-by: Christoph Egger <Christoph.Egger@amd.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09QEMU: MCE: Add MCE simulation to qemu/tcgHuang Ying
- MCE features are initialized when VCPU is intialized according to CPUID. - A monitor command "mce" is added to inject a MCE. - A new interrupt mask: CPU_INTERRUPT_MCE is added to inject the MCE. aliguori: fix build for linux-user Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09Merge commit 'linux-user/linux-user-for-upstream' into tmp-stagingAnthony Liguori
2009-07-09MIPS signal handling fixPaul Brook
Add explicit padding to MIPS signal frame structures. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-07-09Enable MIPS NPTLPaul Brook
Enable NPTL support for MIPS usermode emulation. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-07-09MIPS atomic instructionsPaul Brook
Implement MIPS ll/sc instructions using atomic compare+exchange. Signed-off-by: Paul Brook <paul@codesourcery.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 21:44:42 +0000