aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-07pnv/xive: Add property on xive sources to define PQ state on resetFrederic Barrat
The PQ state of a xive interrupt is always initialized to Q=1, which means the interrupt is disabled. Since a xive source can be embedded in many objects, this patch adds a property to allow that behavior to be refined if needed. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20230703081215.55252-2-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07pnv/xive2: Fix TIMA offset for indirect accessFrederic Barrat
Direct TIMA operations can be done through 4 pages, each with a different privilege level dictating what fields can be accessed. On the other hand, indirect TIMA accesses on P10 are done through a single page, which is the equivalent of the most privileged page of direct TIMA accesses. The offset in the IC bar of an indirect access specifies what hw thread is targeted (page shift bits) and the offset in the TIMA being accessed (the page offset bits). When the indirect access is calling the underlying direct access functions, it is therefore important to clearly separate the 2, as the direct functions assume any page shift bits define the privilege ring level. For indirect accesses, those bits must be 0. This patch fixes the offset passed to direct TIMA functions. It didn't matter for SMT1, as the 2 least significant bits of the page shift are part of the hw thread ID and always 0, so the direct TIMA functions were accessing the privilege ring 0 page. With SMT4/8, it is no longer true. The fix is specific to P10, as indirect TIMA access on P9 was handled differently. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-ID: <20230703080858.54060-1-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07target: ppc: Use MSR_HVB bit to get the target endianness for memory dumpNarayana Murty N
Currently on PPC64 qemu always dumps the guest memory in Big Endian (BE) format even though the guest running in Little Endian (LE) mode. So crash tool fails to load the dump as illustrated below: Log : $ virsh dump DOMAIN --memory-only dump.file Domain 'DOMAIN' dumped to dump.file $ crash vmlinux dump.file <snip> crash 8.0.2-1.el9 WARNING: endian mismatch: crash utility: little-endian dump.file: big-endian WARNING: machine type mismatch: crash utility: PPC64 dump.file: (unknown) crash: dump.file: not a supported file format <snip> This happens because cpu_get_dump_info() passes cpu->env->has_hv_mode to function ppc_interrupts_little_endian(), the cpu->env->has_hv_mode always set for powerNV even though the guest is not running in hv mode. The hv mode should be taken from msr_mask MSR_HVB bit (cpu->env.msr_mask & MSR_HVB). This patch fixes the issue by passing MSR_HVB value to ppc_interrupts_little_endian() in order to determine the guest endianness. The crash tool also expects guest kernel endianness should match the endianness of the dump. The patch was tested on POWER9 box booted with Linux as host in following cases: Host-Endianess Qemu-Target-Machine Qemu-Generated-Guest Memory-Dump-Format BE powernv(OPAL/PowerNV) LE BE powernv(OPAL/PowerNV) BE LE powernv(OPAL/PowerNV) LE LE powernv(OPAL/PowerNV) BE LE pseries(OPAL/PowerNV/pSeries) KVMHV LE LE pseries TCG LE Fixes: 5609400a4228 ("target/ppc: Set the correct endianness for powernv memory dumps") Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com> Message-ID: <20230623072506.34713-1-nnmlinux@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07target/ppc: Get CPUState in one stepBALATON Zoltan
We can get CPUState from env with env_cpu without going through PowerPCCPU and casting that. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: Nicholas Piggin <npiggin@gmail.com> Message-ID: <28424220f37f51ce97f24cadc7538a9c0d16cb45.1686868895.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07target/ppd: Remove unused defineBALATON Zoltan
Commit 7a3fe174b12d removed usage of POWERPC_SYSCALL_VECTORED, drop the unused define as well. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Message-ID: <50adc24f9d408882128e896d8a81a1a059c41836.1686868895.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07target/ppc: Remove some more local CPUState variables only used onceBALATON Zoltan
Some helpers only have a CPUState local to call cpu_interrupt_exittb() but we can use env_cpu for that and remove the local. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: Nicholas Piggin <npiggin@gmail.com> Message-ID: <aa34e449552c6ab52d48938ccbe762fc06adac01.1686868895.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07target/ppc: Move common check in exception handlers to a functionBALATON Zoltan
All powerpc exception handlers share some code when handling machine check exceptions. Move this to a common function. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Message-ID: <9cfffaa35aa894086dd092af6b0b26f2d62ff3de.1686868895.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07target/ppc: Remove unneeded parameter from powerpc_reset_wakeup()BALATON Zoltan
CPUState is rarely needed by this function (only for logging a fatal error) and it's easy to get from the env parameter so passing it separately is not necessary. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: Nicholas Piggin <npiggin@gmail.com> Message-ID: <f42761401c708fd6e02f7523d9f709b1972e5863.1686868895.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07target/ppc: Remove some superfluous parenthesesBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: Nicholas Piggin <npiggin@gmail.com> Message-ID: <8384ed0f7335093012bbd3d28fb2a543a2e7346c.1686868895.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07pnv/xive2: Allow indirect TIMA accesses of all sizesFrederic Barrat
Booting linux on the powernv10 machine logs a few errors like: Invalid read at addr 0x38, size 1, region 'xive-ic-tm-indirect', reason: invalid size (min:8 max:8) Invalid write at addr 0x38, size 1, region 'xive-ic-tm-indirect', reason: invalid size (min:8 max:8) Invalid read at addr 0x38, size 1, region 'xive-ic-tm-indirect', reason: invalid size (min:8 max:8) Those errors happen when linux is resetting XIVE. We're trying to read/write the enablement bit for the hardware context and qemu doesn't allow indirect TIMA accesses of less than 8 bytes. Direct TIMA access can go through though, as well as indirect TIMA accesses on P9. So even though there are some restrictions regarding the address/size combinations for TIMA access, the example above is perfectly valid. This patch lets indirect TIMA accesses of all sizes go through. The special operations will be intercepted and the default "raw" handlers will pick up all other requests and complain about invalid sizes as appropriate. Tested-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-ID: <20230626094057.1192473-1-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07tests/avocado: record_replay test for ppc powernv machineNicholas Piggin
The powernv machine can boot Linux to VFS mount with icount enabled. Add a test case for it. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-ID: <20230625103700.8992-2-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07target/ppc: Fix icount access for some hypervisor instructionsNicholas Piggin
Several instructions and register access require icount reads and are missing translator_io_start(). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20230625103700.8992-1-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07sungem: Add WOL MMIONicholas Piggin
Apple sungem devices are expected to have WOL MMIO registers. Add a region to prevent transaction failures, and implement the WOL-disable CSR write because the Linux driver reset writes this. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-ID: <20230625201628.65231-1-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07target/ppc: Add TFMR SPR implementation with read and write helpersNicholas Piggin
TFMR is the Time Facility Management Register which is specific to POWER CPUs, and used for the purpose of timebase management (generally by firmware, not the OS). Add helpers for the TFMR register, which will form part of the core timebase facility model in future but for now behaviour is unchanged. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-ID: <20230625120317.13877-3-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07target/ppc: Tidy POWER book4 SPR registrationNicholas Piggin
POWER book4 (implementation-specific) SPRs are sometimes in their own functions, but in other cases are mixed with architected SPRs. Do some spring cleaning on these. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-ID: <20230625120317.13877-2-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07mv64361: Add dummy gigabit ethernet PHY access registersBALATON Zoltan
We don't emulate the gigabit ethernet part of the chip but the MorphOS driver accesses these and expects to get some valid looking result otherwise it hangs. Add some minimal dummy implementation to avoid rhis. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: Cédric Le Goater <clg@kaod.org> Message-ID: <20230605215145.29458746335@zero.eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07target/ppc: Only generate decodetree files when TCG is enabledPhilippe Mathieu-Daudé
No need to generate TCG-specific decodetree files when TCG is disabled. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20230626140100.67941-1-philmd@linaro.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07hw/ppc: Fix clock update driftNicholas Piggin
The clock update logic reads the clock twice to compute the new clock value, with a value derived from the later time subtracted from a value derived from the earlier time. The delta causes time to be lost. This can ultimately result in time becoming unsynchronized between CPUs and that can cause OS lockups, timeouts, watchdogs, etc. This can be seen running a KVM guest (that causes lots of TB updates) on a powernv SMP machine. Fix this by reading the clock once. Cc: qemu-stable@nongnu.org Fixes: dbdd25065e90 ("Implement time-base start/stop helpers.") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com> Message-ID: <20230629020713.327745-1-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07target/ppc: Make HDECR underflow edge triggeredNicholas Piggin
HDEC interrupts are edge-triggered on HDECR underflow (notably different from DEC which is level-triggered). HDEC interrupts already clear the irq on delivery so that does not need to be changed. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-ID: <20230625122045.15544-1-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07pnv/psi: Allow access to PSI registers through xscomFrederic Barrat
skiboot only uses mmio to access the PSI registers (once the BAR is set) but we don't have any reason to block the accesses through xscom. This patch enables xscom access to the PSI registers. It converts the xscom addresses to mmio addresses, which requires a bit of care for the PSIHB, then reuse the existing mmio ops. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-ID: <20230630102609.193214-1-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-06Merge tag 'pull-9p-20230706' of https://github.com/cschoenebeck/qemu into ↵Richard Henderson
staging Administrative changes only: * Deprecate 9p 'proxy' backend. * Raise status of 9p to 'Maintained'. # -----BEGIN PGP SIGNATURE----- # # iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAmSmkAsXHHFlbXVfb3Nz # QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5We1xAAol+HbhQ2zNCJUbZ2/WY3Jf0H # K86DRQIs6w6UkL9msFz+id+tR5i50HoJ3+RnOKvy/fPqO8Rv6mb0d9r+bIG1JJCc # ubHP91x/nyDbP0XbLMtmtCz/T4g67E11Qqriq7lH1bPF7ccU3iXHZNup9HARjOoE # SQo9x4e7IDi1WdmM2vjvRXCh4ZLIlBv7c+2vAeP4V7FhJhDkL+1y+w6aCFw0xpd8 # lto3Egnhz6pk7+SJfQwCl3rfozHhCxlNmcNa+7vqckVFpdJrvtKOQB4cn9yVDPr/ # WjmYoB2J3MwYuZz+qAkdRJ6dUTLJb87YqJJe6lcKq0lqjiFBk7TccvIN9WgyJQd/ # eLUPCCyo98g9RCaPzjLc4MgbpCPCmqJkg8A1vJzykvq51BqJZcdkwfJ7LFmsvTSo # IfR1Seq4OUUzTZ2gWh8wJBNcPpAbilHzQnumxBEupe0Dg/pwoQWCywTYJN6Yf/6+ # PzcK39bVFKrEyc4Z1Y/yXvAzD7nX8X78kSHvxYYEQfzruLIVQjUUQ7Mp3TiJvljk # mLdcYqavjawgC2zmZU4L2Lx4Su7iVIkhNWj57WkfooSzLrAjueYQIJEltAt8Qmn6 # x3+u3xI/myNKujMpaqgTAU5Gk2J2UApshq5Zwe8HpnVwWoxS3QetXdA/f4AXwZOk # TpnKPYQa7edPLSSAbAs= # =GzjR # -----END PGP SIGNATURE----- # gpg: Signature made Thu 06 Jul 2023 10:57:31 AM BST # gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395 # gpg: issuer "qemu_oss@crudebyte.com" # gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4 # Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395 * tag 'pull-9p-20230706' of https://github.com/cschoenebeck/qemu: MAINTAINERS: raise status of 9p to 'Maintained' 9pfs: deprecate 'proxy' backend Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-06Merge tag 'pull-target-arm-20230706' of ↵Richard Henderson
https://git.linaro.org/people/pmaydell/qemu-arm into staging target-arm queue: * Add raw_writes ops for register whose write induce TLB maintenance * hw/arm/sbsa-ref: use XHCI to replace EHCI * Avoid splitting Zregs across lines in dump * Dump ZA[] when active * Fix SME full tile indexing * Handle IC IVAU to improve compatibility with JITs * xlnx-canfd-test: Fix code coverity issues * gdbstub: Guard M-profile code with CONFIG_TCG * allwinner-sramc: Set class_size * target/xtensa: Assert that interrupt level is within bounds * Avoid over-length shift in arm_cpu_sve_finalize() error case * Define new 'neoverse-v1' CPU type # -----BEGIN PGP SIGNATURE----- # # iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmSmwEEZHHBldGVyLm1h # eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3vBcD/4vKUw6klRV7vyz/KBr2AOi # Z1FnkLmOhwdp7CKvAVfU58TbPEJ8Fjo7OjziByV5nn/Ht9XrXcdl/E+0JamgrJ/n # G90ZfpoY3Boan4XBukBz/KX63sT1erF4io1NxbvqLxZ2mbZWNb0D1v2qkxC5zPFE # 97knlbSle4/VB8N6VgaPaWKVy5gmBZQwl7NUlFtB8TTZp3HPo0V77E9p1Wqpwpls # BNbqdtgUre3dlJci2f24PmXHYraKa68qk9xGnsSae96EY2+pOHbKhoZ/Fobaor2C # u+dfgQ3fY3aLDVKx8UESIUoqkGoVqwEbmt+pWG2rJiljLkdsI3ZsVq7p3+VGbLAN # berL14kCC2vRQYeNUwxeh5wdNVXc58xhWI5KXQRe8hr1dKWS5LQEHWgr7g7mb0+m # zPHqbdF4FR1DAV29vQ9WyK4zttrinFAYl+zvLyd8dX2ogoUeivR+4o3YX4hlFr4H # vcrglZbCGqAb3oKQG3PSGliS9GYtBwodLqKEH8PfcwfOP5PIcnSVc0Kl9DSzf7um # dAuYpaK/XW3MPx5qpWjnip4dRWUV5m/6nSCJr+fELEv3A0sGZY4pywv5NS/Yg1wE # nXdi8D+nyx9+AAiWTcB+ePsLuDEO2gYtubfqed99TFoJbL6/b4NbH8YE6cF3N/gY # lqFyvEIYNJZ9klf7XKnX2w== # =/MkB # -----END PGP SIGNATURE----- # gpg: Signature made Thu 06 Jul 2023 02:23:13 PM BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown] * tag 'pull-target-arm-20230706' of https://git.linaro.org/people/pmaydell/qemu-arm: target/arm: Avoid over-length shift in arm_cpu_sve_finalize() error case target/arm: Define neoverse-v1 target/arm: Suppress more TCG unimplemented features in ID registers target/xtensa: Assert that interrupt level is within bounds hw: arm: allwinner-sramc: Set class_size target/arm: gdbstub: Guard M-profile code with CONFIG_TCG tests/qtest: xlnx-canfd-test: Fix code coverity issues target/arm: Handle IC IVAU to improve compatibility with JITs target/arm: Fix SME full tile indexing target/arm: Dump ZA[] when active target/arm: Avoid splitting Zregs across lines in dump tests/tcg/aarch64/sysregs.c: Use S syntax for id_aa64zfr0_el1 and id_aa64smfr0_el1 hw/arm/sbsa-ref: use XHCI to replace EHCI target/arm: Add raw_writes ops for register whose write induce TLB maintenance Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-06target/arm: Avoid over-length shift in arm_cpu_sve_finalize() error casePeter Maydell
If you build QEMU with the clang sanitizer enabled, you can see it fire when running the arm-cpu-features test: $ QTEST_QEMU_BINARY=./build/arm-clang/qemu-system-aarch64 ./build/arm-clang/tests/qtest/arm-cpu-features [...] ../../target/arm/cpu64.c:125:19: runtime error: shift exponent 64 is too large for 64-bit type 'unsigned long long' [...] This happens because the user can specify some incorrect SVE properties that result in our calculating a max_vq of 0. We catch this and error out, but before we do that we calculate vq_mask = MAKE_64BIT_MASK(0, max_vq);$ and the MAKE_64BIT_MASK() call is only valid for lengths that are greater than zero, so we hit the undefined behaviour. Change the logic so that if max_vq is 0 we specifically set vq_mask to 0 without going via MAKE_64BIT_MASK(). This lets us drop the max_vq check from the error-exit logic, because if max_vq is 0 then vq_map must now be 0. The UB only happens in the case where the user passed us an incorrect set of SVE properties, so it's not a big problem in practice. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230704154332.3014896-1-peter.maydell@linaro.org
2023-07-06target/arm: Define neoverse-v1Peter Maydell
Now that we have implemented support for FEAT_LSE2, we can define a CPU model for the Neoverse-V1, and enable it for the virt and sbsa-ref boards. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230704130647.2842917-3-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-06target/arm: Suppress more TCG unimplemented features in ID registersPeter Maydell
We already squash the ID register field for FEAT_SPE (the Statistical Profiling Extension) because TCG does not implement it and if we advertise it to the guest the guest will crash trying to look at non-existent system registers. Do the same for some other features which a real hardware Neoverse-V1 implements but which TCG doesn't: * FEAT_TRF (Self-hosted Trace Extension) * Trace Macrocell system register access * Memory mapped trace * FEAT_AMU (Activity Monitors Extension) * FEAT_MPAM (Memory Partitioning and Monitoring Extension) * FEAT_NV (Nested Virtualization) Most of these, like FEAT_SPE, are "introspection/trace" type features which QEMU is unlikely to ever implement. The odd-one-out here is FEAT_NV -- we could implement that and at some point we probably will. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230704130647.2842917-2-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-06target/xtensa: Assert that interrupt level is within boundsPeter Maydell
In handle_interrupt() we use level as an index into the interrupt_vector[] array. This is safe because we have checked it against env->config->nlevel, but Coverity can't see that (and it is only true because each CPU config sets its XCHAL_NUM_INTLEVELS to something less than MAX_NLEVELS), so it complains about a possible array overrun (CID 1507131) Add an assert() which will make Coverity happy and catch the unlikely case of a mis-set XCHAL_NUM_INTLEVELS in future. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Message-id: 20230623154135.1930261-1-peter.maydell@linaro.org
2023-07-06hw: arm: allwinner-sramc: Set class_sizeAkihiko Odaki
AwSRAMCClass is larger than SysBusDeviceClass so the class size must be advertised accordingly. Fixes: 05def917e1 ("hw: arm: allwinner-sramc: Add SRAM Controller support for R40") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230628110905.38125-1-akihiko.odaki@daynix.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-07-06target/arm: gdbstub: Guard M-profile code with CONFIG_TCGFabiano Rosas
This code is only relevant when TCG is present in the build. Building with --disable-tcg --enable-xen on an x86 host we get: $ ../configure --target-list=x86_64-softmmu,aarch64-softmmu --disable-tcg --enable-xen $ make -j$(nproc) ... libqemu-aarch64-softmmu.fa.p/target_arm_gdbstub.c.o: in function `m_sysreg_ptr': ../target/arm/gdbstub.c:358: undefined reference to `arm_v7m_get_sp_ptr' ../target/arm/gdbstub.c:361: undefined reference to `arm_v7m_get_sp_ptr' libqemu-aarch64-softmmu.fa.p/target_arm_gdbstub.c.o: in function `arm_gdb_get_m_systemreg': ../target/arm/gdbstub.c:405: undefined reference to `arm_v7m_mrs_control' Signed-off-by: Fabiano Rosas <farosas@suse.de> Message-id: 20230628164821.16771-1-farosas@suse.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-07-06tests/qtest: xlnx-canfd-test: Fix code coverity issuesVikram Garhwal
Following are done to fix the coverity issues: 1. Change read_data to fix the CID 1512899: Out-of-bounds access (OVERRUN) 2. Fix match_rx_tx_data to fix CID 1512900: Logically dead code (DEADCODE) 3. Replace rand() in generate_random_data() with g_rand_int() Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com> Message-id: 20230628202758.16398-1-vikram.garhwal@amd.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-07-06target/arm: Handle IC IVAU to improve compatibility with JITsJohn Högberg
Unlike architectures with precise self-modifying code semantics (e.g. x86) ARM processors do not maintain coherency for instruction execution and memory, requiring an instruction synchronization barrier on every core that will execute the new code, and on many models also the explicit use of cache management instructions. While this is required to make JITs work on actual hardware, QEMU has gotten away with not handling this since it does not emulate caches, and unconditionally invalidates code whenever the softmmu or the user-mode page protection logic detects that code has been modified. Unfortunately the latter does not work in the face of dual-mapped code (a common W^X workaround), where one page is executable and the other is writable: user-mode has no way to connect one with the other as that is only known to the kernel and the emulated application. This commit works around the issue by telling software that instruction cache invalidation is required by clearing the CPR_EL0.DIC flag (regardless of whether the emulated processor needs it), and then invalidating code in IC IVAU instructions. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1034 Co-authored-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: John Högberg <john.hogberg@ericsson.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 168778890374.24232.3402138851538068785-1@git.sr.ht [PMM: removed unnecessary AArch64 feature check; moved "clear CTR_EL1.DIC" code up a bit so it's not in the middle of the vfp/neon related tests] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-07-06target/arm: Fix SME full tile indexingRichard Henderson
For the outer product set of insns, which take an entire matrix tile as output, the argument is not a combined tile+column. Therefore using get_tile_rowcol was incorrect, as we extracted the tile number from itself. The test case relies only on assembler support for SME, since no release of GCC recognizes -march=armv9-a+sme yet. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1620 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230622151201.1578522-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: dropped now-unneeded changes to sysregs CFLAGS] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-07-06target/arm: Dump ZA[] when activeRichard Henderson
Always print each matrix row whole, one per line, so that we get the entire matrix in the proper shape. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230622151201.1578522-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-07-06target/arm: Avoid splitting Zregs across lines in dumpRichard Henderson
Allow the line length to extend to 548 columns. While annoyingly wide, it's still less confusing than the continuations we print. Also, the default VL used by Linux (and max for A64FX) uses only 140 columns. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230622151201.1578522-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-07-06tests/tcg/aarch64/sysregs.c: Use S syntax for id_aa64zfr0_el1 and ↵Peter Maydell
id_aa64smfr0_el1 Some assemblers will complain about attempts to access id_aa64zfr0_el1 and id_aa64smfr0_el1 by name if the test binary isn't built for the right processor type: /tmp/ccASXpLo.s:782: Error: selected processor does not support system register name 'id_aa64zfr0_el1' /tmp/ccASXpLo.s:829: Error: selected processor does not support system register name 'id_aa64smfr0_el1' However, these registers are in the ID space and are guaranteed to read-as-zero on older CPUs, so the access is both safe and sensible. Switch to using the S syntax, as we already do for ID_AA64ISAR2_EL1 and ID_AA64MMFR2_EL1. This allows us to drop the HAS_ARMV9_SME check and the makefile machinery to adjust the CFLAGS for this test, so we don't rely on having a sufficiently new compiler to be able to check these registers. This means we're actually testing the SME ID register: no released GCC yet recognizes -march=armv9-a+sme, so that was always skipped. It also avoids a future problem if we try to switch the "do we have SME support in the toolchain" check from "in the compiler" to "in the assembler" (at which point we would otherwise run into the above errors). Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-07-06MAINTAINERS: raise status of 9p to 'Maintained'Christian Schoenebeck
Change status of 9p from 'Odd Fixes' to 'Maintained', as this better reflects current situation. I already take care of 9p patches for a while, which included new features as well. Based-on: <E1qDkmw-0007M1-8f@lizzy.crudebyte.com> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <E1qGKgV-0003Hj-01@lizzy.crudebyte.com>
2023-07-069pfs: deprecate 'proxy' backendChristian Schoenebeck
As recent CVE-2023-2861 (fixed by f6b0de53fb) once again showed, the 9p 'proxy' fs driver is in bad shape. Using the 'proxy' backend was already discouraged for safety reasons before and we recommended to use the 'local' backend (preferably in conjunction with its 'mapped' security model) instead, but now it is time to officially deprecate the 'proxy' backend. Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <E1qDkmw-0007M1-8f@lizzy.crudebyte.com>
2023-07-04Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into stagingRichard Henderson
Pull request Fix --enable-modules with the blkio block driver. # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmSkOtQACgkQnKSrs4Gr # c8ipnQgAqrcwgJliN9wMopm5bFEiHkAppvGz/+qliEpQI5X7xt+YGhcEx7O7ZNMu # uSz47y5uQwNNbh4HA51gUkSopAcfH2FP8rD/FH5x7D7mmR3M61AH5LEzzlBbnneW # ZtuGSNIvV23mTlQOHqNOGQxV9k3QGrXfxQz0Hy4NKP6jiC1zNdAsCXC8dj9Fda+M # nobFXe21qhm0YHYGVgLurbjlTY3aBxL3SOSG550OjQT1Prpi+rw26aK0Gtg1jWL/ # ynGEgxgUjvO2uqZk71NN5Xr6CLe/SLO9cdIeuhwXffna5uf80S254fMhr9Yr1h52 # P5UFi4iQZi//fprGD72a6eyogdSzUg== # =USrv # -----END PGP SIGNATURE----- # gpg: Signature made Tue 04 Jul 2023 05:29:24 PM CEST # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] * tag 'block-pull-request' of https://gitlab.com/stefanha/qemu: block/blkio: fix module_block.py parsing Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-04block/blkio: fix module_block.py parsingStefan Hajnoczi
When QEMU is built with --enable-modules, the module_block.py script parses block/*.c to find block drivers that are built as modules. The script generates a table of block drivers called block_driver_modules[]. This table is used for block driver module loading. The blkio.c driver uses macros to define its BlockDriver structs. This was done to avoid code duplication but the module_block.py script is unable to parse the macro. The result is that libblkio-based block drivers can be built as modules but will not be found at runtime. One fix is to make the module_block.py script or build system fancier so it can parse C macros (e.g. by parsing the preprocessed source code). I chose not to do this because it raises the complexity of the build, making future issues harder to debug. Keep things simple: use the macro to avoid duplicating BlockDriver function pointers but define .format_name and .protocol_name manually for each BlockDriver. This way the module_block.py is able to parse the code. Also get rid of the block driver name macros (e.g. DRIVER_IO_URING) because module_block.py cannot parse them either. Fixes: fd66dbd424f5 ("blkio: add libblkio block driver") Reported-by: Qing Wang <qinwang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20230704123436.187761-1-stefanha@redhat.com Cc: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-07-04hw/arm/sbsa-ref: use XHCI to replace EHCIYuquan Wang
The current sbsa-ref cannot use EHCI controller which is only able to do 32-bit DMA, since sbsa-ref doesn't have RAM below 4GB. Hence, this uses XHCI to provide a usb controller with 64-bit DMA capablity instead of EHCI. We bump the platform version to 0.3 with this change. Although the hardware at the USB controller address changes, the firmware and Linux can both cope with this -- on an older non-XHCI-aware firmware/kernel setup the probe routine simply fails and the guest proceeds without any USB. (This isn't a loss of functionality, because the old USB controller never worked in the first place.) So we can call this a backwards-compatible change and only bump the minor version. Signed-off-by: Yuquan Wang <wangyuquan1236@phytium.com.cn> Message-id: 20230621103847.447508-2-wangyuquan1236@phytium.com.cn [PMM: tweaked commit message; add line to docs about what changes in platform version 0.3] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-07-04target/arm: Add raw_writes ops for register whose write induce TLB maintenanceEric Auger
Some registers whose 'cooked' writefns induce TLB maintenance do not have raw_writefn ops defined. If only the writefn ops is set (ie. no raw_writefn is provided), it is assumed the cooked also work as the raw one. For those registers it is not obvious the tlb_flush works on KVM mode so better/safer setting the raw write. Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-07-04Merge tag 'pull-maintainer-ominbus-030723-1' of ↵Richard Henderson
https://gitlab.com/stsquad/qemu into staging maintainer updates: testing, fuzz, plugins, docs, gdbstub - clean up gitlab artefact handling - ensure gitlab publishes artefacts with coverage data - reduce testing scope for coverage job - mention CI pipeline in developer docs - add ability to add plugin args to check-tcg - fix some memory leaks and UB in tests - suppress xcb leaks from fuzzing output - add a test-fuzz to mirror the CI run - allow lci-refresh to be run in $SRC - update lcitool to latest version - add qemu-minimal package set with gcc-native - convert riscv64-cross to lcitool - update sbsa-ref tests - don't include arm_casq_ptw emulation unless TCG - convert plugins to use g_memdup2 - ensure plugins instrument SVE helper mem access - improve documentation of QOM/QDEV - make gdbstub send stop responses when it should - report user-mode pid in gdbstub - add support for info proc mappings in gdbstub # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmSiuH4ACgkQ+9DbCVqe # KkRt0Qf+N0oD/VuEcRSxK1bWlLtf5nxQpPKKzkRItPc5jqJnLWa/gh21sfQgs5Uq # BczAT+JfgTnMozbq0mjvQ+uAGI4MHzBs+UAn60+ZcXfk2inyk77XKBEoHOFuK1ry # rgQ4+p21/hcZedDiDLnLSfbGfUU0KkM/pbAegOz7HO0EQDV0CSXqeAW3WAuM1lne # +YmXkKwoFI1V8HvslzCT12GFiaUfmSSBtASqWcf67Ief97K24+rpkAVM7JChLm5X # fC1MOFNuNYV+jO+9U3KIs15P1WH12oMcpNUY+KqQ5ZWovBg83yOLtKY1o3f6Z2Y+ # iQgFJr6F8ZVBdKNJtqVi8DkbiFfbsA== # =Ho/h # -----END PGP SIGNATURE----- # gpg: Signature made Mon 03 Jul 2023 02:01:02 PM CEST # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * tag 'pull-maintainer-ominbus-030723-1' of https://gitlab.com/stsquad/qemu: (38 commits) tests/tcg: Add a test for info proc mappings docs: Document security implications of debugging gdbstub: Add support for info proc mappings gdbstub: Report the actual qemu-user pid gdbstub: Expose gdb_get_process() and gdb_get_first_cpu_in_process() linux-user: Emulate /proc/self/smaps linux-user: Add "safe" parameter to do_guest_openat() linux-user: Expose do_guest_openat() and do_guest_readlink() gdbstub: clean-up vcont handling to avoid goto gdbstub: Permit reverse step/break to provide stop response gdbstub: lightly refactor connection to avoid snprintf docs/devel: introduce some key concepts for QOM development docs/devel: split qom-api reference into new file docs/devel/qom.rst: Correct code style include/hw/qdev-core: fixup kerneldoc annotations include/migration: mark vmstate_register() as a legacy function docs/devel: add some front matter to the devel index plugins: update lockstep to use g_memdup2 plugins: fix memory leak while parsing options plugins: force slow path when plugins instrument memory ops ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-03tests/tcg: Add a test for info proc mappingsIlya Leoshkevich
Add a small test to prevent regressions. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Message-Id: <20230621203627.1808446-9-iii@linux.ibm.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230630180423.558337-39-alex.bennee@linaro.org>
2023-07-03docs: Document security implications of debuggingIlya Leoshkevich
Now that the GDB stub explicitly implements reading host files (note that it was already possible by changing the emulated code to open and read those files), concerns may arise that it undermines security. Document the status quo, which is that the users are already responsible for securing the GDB connection themselves. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230621203627.1808446-8-iii@linux.ibm.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230630180423.558337-38-alex.bennee@linaro.org>
2023-07-03gdbstub: Add support for info proc mappingsIlya Leoshkevich
Currently the GDB's generate-core-file command doesn't work well with qemu-user: the resulting dumps are huge [1] and at the same time incomplete (argv and envp are missing). The reason is that GDB has no access to proc mappings and therefore has to fall back to using heuristics for discovering them. This is, in turn, because qemu-user does not implement the Host I/O feature of the GDB Remote Serial Protocol. Implement vFile:{open,close,pread,readlink} and also qXfer:exec-file:read+. With that, generate-core-file begins to work on aarch64 and s390x. [1] https://sourceware.org/pipermail/gdb-patches/2023-May/199432.html Co-developed-by: Dominik 'Disconnect3d' Czarnota <dominik.b.czarnota@gmail.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Message-Id: <20230621203627.1808446-7-iii@linux.ibm.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230630180423.558337-37-alex.bennee@linaro.org>
2023-07-03gdbstub: Report the actual qemu-user pidIlya Leoshkevich
Currently qemu-user reports pid 1 to GDB. Resolve the TODO and report the actual PID. Using getpid() relies on the assumption that there is only one GDBProcess. Add an assertion to make sure that future changes don't break it. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Message-Id: <20230621203627.1808446-6-iii@linux.ibm.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230630180423.558337-36-alex.bennee@linaro.org>
2023-07-03gdbstub: Expose gdb_get_process() and gdb_get_first_cpu_in_process()Ilya Leoshkevich
These functions will be needed by user-target.c in order to retrieve the name of the executable. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Message-Id: <20230621203627.1808446-5-iii@linux.ibm.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230630180423.558337-35-alex.bennee@linaro.org>
2023-07-03linux-user: Emulate /proc/self/smapsIlya Leoshkevich
/proc/self/smaps is an extension of /proc/self/maps: it provides the same lines, plus additional information about each range. GDB uses /proc/self/smaps when available, which means that generate-core-file tries it first before falling back to /proc/self/maps. This, in turn, causes it to dump the host mappings, since /proc/self/smaps is not emulated and is just passed through. Fix by emulating /proc/self/smaps. Provide true values only for Size, KernelPageSize, MMUPageSize and VmFlags. Leave all other values at 0, which is a valid conservative estimate. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230621203627.1808446-4-iii@linux.ibm.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230630180423.558337-34-alex.bennee@linaro.org>
2023-07-03linux-user: Add "safe" parameter to do_guest_openat()Ilya Leoshkevich
gdbstub cannot meaningfully handle QEMU_ERESTARTSYS, and it doesn't need to. Add a parameter to do_guest_openat() that makes it use openat() instead of safe_openat(), so that it becomes usable from gdbstub. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230621203627.1808446-3-iii@linux.ibm.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230630180423.558337-33-alex.bennee@linaro.org>
2023-07-03linux-user: Expose do_guest_openat() and do_guest_readlink()Ilya Leoshkevich
These functions will be required by the GDB stub in order to provide the guest view of /proc to GDB. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230621203627.1808446-2-iii@linux.ibm.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230630180423.558337-32-alex.bennee@linaro.org>
2023-07-03gdbstub: clean-up vcont handling to avoid gotoAlex Bennée
We can handle all the error exit cases by using g_autofree() for the one thing that needs cleaning up on the exit. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230630180423.558337-31-alex.bennee@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-02 20:34:31 +0000