aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-02-19Monitor: Convert do_physical_memory_save() to cmd_new_ret()Luiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_memory_save() to cmd_new_ret()Luiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_migrate() to cmd_new_ret()Luiz Capitulino
While there I'm also dropping a unneeded else clause (the last one in the function). Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert pci_device_hot_remove() to cmd_new_ret()Luiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert pci_device_hot_add() to cmd_new_ret()Luiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_closefd() to cmd_new_ret()Luiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_getfd() to cmd_new_ret()Luiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_block_set_passwd() to cmd_new_ret()Luiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_cpu_set() to cmd_new_ret()Luiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_eject() to cmd_new_ret()Luiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_cont() to cmd_new_ret()Luiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert simple handlers to cmd_new_ret()Luiz Capitulino
The following handlers always succeed and hence can be converted to cmd_new_ret() in the same commit. - do_stop() - do_quit() - do_system_reset() - do_system_powerdown() - do_migrate_cancel() - do_qmp_capabilities() - do_migrate_set_speed() - do_migrate_set_downtime() Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Introduce cmd_new_ret()Luiz Capitulino
In order to implement the new error handling and debugging mechanism for command handlers, we need to change the cmd_new() callback to return a value. This commit introduces cmd_new_ret(), which returns a value and will be used only temporarily to handle the transition from cmd_new(). That is, as soon as all command handlers are ported to cmd_new_ret(), it will be renamed back to cmd_new() and the new error handling and debugging mechanism will be added on top of it. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19move default allocator to console.cPaolo Bonzini
Moving stuff in console.c to avoid the need for prototypes makes this patch a bit bigger, but there's no change in the code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19remove knowledge of defaultallocator_free_displaysurface from sdl.cPaolo Bonzini
Let register_displayallocator hand over the old width/height to the new allocator. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19use lazy initialization for display_statePaolo Bonzini
Ensure initialization of a dumb display, if needed, by making all accesses go through get_displaystate. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori
2010-02-19net: Monitor command set_link finds only VLAN clients, fixMarkus Armbruster
Clients not associated with a VLAN exist since commit d80b9fc6. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19net: info network shows only VLAN clients, fixMarkus Armbruster
Clients not associated with a VLAN exist since commit d80b9fc6. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19net: net_check_clients() checks only VLAN clients, fixMarkus Armbruster
Clients not associated with a VLAN exist since commit d80b9fc6. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19net: Fix bogus "Warning: vlan 0 with no nics" with -deviceMarkus Armbruster
net_check_clients() prints this when an VLAN has host devices, but no guest devices. It uses VLANState members nb_guest_devs and nb_host_devs to keep track of these devices. However, -device does not update nb_guest_devs, only net_init_nic() does that, for -net nic. Check the VLAN clients directly, and remove the counters. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19net: net_check_clients() runs too early to see -device, fixMarkus Armbruster
Call it right after -device devices get created. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19net: Remove unused net_client_uninit()Markus Armbruster
Unused since commit 9ad4531e. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Fix strace or FUTEX_PRIVATE_FLAGPaul Brook
FUTEX_PRIVATE_FLAG is a bit orred with an existing futex op, not a distinct value. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-02-19target-arm: support thumb exception handlersRabin Vincent
When handling an exception, switch to the correct mode based on the Thumb Exception (TE) bit in the SCTLR. Signed-off-by: Rabin Vincent <rabin@rab.in>
2010-02-19target-arm: implement Thumb-2 exception returnRabin Vincent
Support the "subs pc, lr" Thumb-2 exception return instruction. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-02-19target-arm: fix thumb CPSRabin Vincent
The Thumb CPS currently does not work correctly: CPSID touches more bits than the instruction wants to, and CPSIE does nothing. Fix it by passing the correct mask (the "affect" bits) and value. Signed-off-by: Rabin Vincent <rabin@rab.in>
2010-02-18get rid of hostregs_helper.hPaolo Bonzini
Since b567b38 (target-arm: remove T0 and T1, 2009-10-16) the only global register that is used is AREG0, so the complexity of hostregs_helper.h is unused. Use regular assignments and a compiler optimization barrier. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-18remove dead m68k definitionsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-18tcg: Add consistency checks for op definitionsStefan Weil
When compiled with CONFIG_DEBUG_TCG, this code looks for missing, duplicate and wrong entries in the op definitions. Errors will raise an assertion at program start (all checks are done in the initial phase). The current code contains such errors, at least for i386 guest on i386 host. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-16tcg-sparc: Implement setcond, setcond2.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-16tcg: Add tcg_swap_cond.Richard Henderson
Returns the condition as if with swapped comparison operands. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-15crisv10: Prettify.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-02-15sparc32 fix spurious dma interrupts v2Artyom Tarasenko
Don't raise irq when not enabled. Raise irq on enabling if DMA_INTR is set Don't clear irq unless it was raised by DMA, as there are other irq sources Don't set DMA_INTR bit spuriously. v1->v2: - Don't clear irq unless it was raised by DMA - Raise irq on enabling if DMA_INTR is set - Assume revertion of 787cfbc432bf1d353a77cbdb613754f3963371a3 Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-15Revert "Sparc32: improve DMA controller IRQ debugging"Blue Swirl
This reverts commit 787cfbc432bf1d353a77cbdb613754f3963371a3.
2010-02-15cris: Add support for CRISv10 translation.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-02-15cris: Use tcg_gen_movi_tl.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-02-15cris: Add v10 style interrupts.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-02-15crisv10: Always clear the V and C flags on btst.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-02-15cris: Prepare for CRISv10.Edgar E. Iglesias
* Add prefix flag and special reg. * Add interrupt lockout. * Add CC_OP_MSTEP. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-02-14versatile_pci: cleanupMichael S. Tsirkin
Cleanup versatile_pci: no need to re-set fields to zero (pci core sets 0 already), use set_word for status field. Compile-tested only, but seems obvious. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-14versatile_pci: convert to symbolic namesMichael S. Tsirkin
This converts versatile_pci to use symbolic constants. Verified by comparing binary to original one. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-14PPC: Add timer when running KVMAlexander Graf
For some odd reason we sometimes hang inside KVM forever. I'd guess it's a race condition where we actually have a level triggered interrupt, but the infrastructure can't expose that yet, so the guest ACKs it, goes to sleep and never gets notified that there's still an interrupt pending. As a quick workaround, let's just wake up every 500 ms. That way we can assure that we're always reinjecting interrupts in time. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: Fix large pagesAlexander Graf
We were masking 1TB SLB entries on the feature bit of 16 MB pages. Obviously that breaks, so let's just ignore 1TB SLB entries for now and instead do 16MB pages correctly. This fixes PPC64 Linux boot with -m above 256. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: Add USB per default on U3Alexander Graf
Linux with CONFIG_PPC64 doesn't support ADB devices anymore, so we have to use USB for keyboard and mouse. This patch enables USB per default on U3 and adds a virtual keyboard and mouse there. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: Get rid of segfaults in DBDMA emulationAlexander Graf
While trying to find the right channel number for the DBDMA emulation I stumbled across segmentation faults that were purely triggered by the guest. The guest should never have the possiblity to segfault us, so let's check all indirect function calls on a channel, so the code even works for channels that have not been reserved. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: Use macio IDE controller for NewworldAlexander Graf
Per default Linux doesn't come with a lot of storage adapters enabled on Mac configurations. The one that's pretty much always present is the pmac-ide, while the cmd64x is almost never included in any distribution. So let's switch to use the MacIO based IDE controller. There is corresponding OpenBIOS code to get interrupts working properly. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: tell the guest about the time base frequencyAlexander Graf
Our guest systems need to know by how much the timebase increases every second, so there usually is a "timebase-frequency" property in the cpu leaf of the device tree. This property is missing in OpenBIOS. With qemu, Linux's fallback timebase speed and qemu's internal timebase speed match up. With KVM, that is no longer true. The guest is running at the same timebase speed as the host. This leads to massive timing problems. On my test machine, a "sleep 2" takes about 14 seconds with KVM enabled. This patch exports the timebase frequency to OpenBIOS, so it can then put them into the device tree. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: Make interrupts workAlexander Graf
The interrupt code as is didn't really work for me. I couldn't even convince Linux to take interrupt 9 in an interrupt-map. So let's do this right. Let's map all PCI interrupts to 0x1b - 0x1e. That way we're at least a small step closer to what real hardware does. I also took the interrupt pin to line conversion from OpenBIOS, which at least assures us we're compatible with our firmware :-). A dump of the PCI interrupt-map from a U2 (iBook): 00009000 00000000 00000000 00000000 ff97c528 00000034 00000001 0000d800 00000000 00000000 00000000 ff97c528 0000003f 00000001 0000c000 00000000 00000000 00000000 ff97c528 0000001b 00000001 0000c800 00000000 00000000 00000000 ff97c528 0000001c 00000001 0000d000 00000000 00000000 00000000 ff97c528 0000001d 00000001 Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: Include dump of lspci -nn on real G5Alexander Graf
To ease debugging and to know what we're lacking, I found it really useful to have an lspci dump of a real U3 based G5 around. So I added a comment for it. If people don't think it's important enough to include this information in the sources, just don't apply this patch. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-27 17:25:55 +0000