aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-06-11softmmu: Add probe_write()Yongbok Kim
Probe for whether the specified guest write access is permitted. If it is not permitted then an exception will be taken in the same way as if this were a real write access (and we will not return). Otherwise the function will return, and there will be a valid entry in the TLB for this access. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11target-mips: Misaligned memory accesses for R6Yongbok Kim
Release 6 requires misaligned memory access support for all ordinary memory access instructions (for example, LW/SW, LWC1/SWC1). However misaligned support is not provided for certain special memory accesses such as atomics (for example, LL/SC). Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11mips_malta: provide ememsize env variable to kernelsPaul Burton
Commit 94c2b6aff43c (mips_malta: support up to 2GiB RAM) provided support for using over 256MB of RAM with the MIPS Malta board, including capping the memsize variable that QEMUs pseudo-bootloader provides to the kernel at 256MB in order to match YAMON. It didn't however provide the ememsize variable which kernels supporting memory outside of the unmapped address spaces (ie. EVA or highmem) may use to determine the true size of the RAM present in the system. Set ememsize to the size of RAM so that such kernels may use all available memory without the user having to manually specifying its size & location. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11target-mips: add Config5.FRE support allowing Status.FR=0 emulationLeon Alrae
This relatively small architectural feature adds the following: FIR.FREP: Read-only. If FREP=1, then Config5.FRE and Config5.UFE are available. Config5.FRE: When enabled all single-precision FP arithmetic instructions, LWC1/LWXC1/MTC1, SWC1/SWXC1/MFC1 cause a Reserved Instructions exception. Config5.UFE: Allows user to write/read Config5.FRE using CTC1/CFC1 instructions. Enable the feature in MIPS64R6-generic CPU. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11target-mips: move group of functions above gen_load_fpr32()Leon Alrae
Move the "Tests" group of functions so that gen_load_fpr32() and gen_store_fpr32() can use generate_exception(). Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11spice: ui_info tweaksGerd Hoffmann
Use the new dpy_ui_info_supported function. Clarifies the control flow. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-11spice-display: fix segfault in qemu_spice_create_updateGerd Hoffmann
Although it is pretty unusual the stride for the guest image and the mirror image maintained by spice-display can be different. So use separate variables for them. https://bugzilla.redhat.com/show_bug.cgi?id=1163047 Cc: qemu-stable@nongnu.org Reported-by: perrier vincent <clownix@clownix.net> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-10Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20150610-1' into ↵Peter Maydell
staging stdvga: factor out mmio subregion init virtio-gpu: add virtio gpu core code, 2d mode # gpg: Signature made Wed Jun 10 10:03:11 2015 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-vga-20150610-1: virtio-gpu/2d: add virtio gpu core code virtio: update headers, add virtio-gpu (2d) stdvga: factor out mmio subregion init stdvga: pass VGACommonState instead of PCIVGAState stdvga: fix offset in pci_vga_ioport_read Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-10vhost-scsi: move qdev properties into vhost-scsi.cShannon Zhao
As only one place in vhost-scsi.c uses DEFINE_VHOST_SCSI_PROPERTIES, there is no need to expose it. Inline it into vhost-scsi.c to avoid wrongly use. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-9p-device: move qdev properties into virtio-9p-device.cShannon Zhao
As only one place in virtio-9p-device.c uses DEFINE_VIRTIO_9P_PROPERTIES, there is no need to expose it. Inline it into virtio-9p-device.c to avoid wrongly use. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-serial-bus: move qdev properties into virtio-serial-bus.cShannon Zhao
As only one place in virtio-serial-bus.c uses DEFINE_VIRTIO_SERIAL_PROPERTIES, there is no need to expose it. Inline it into virtio-serial-bus.c to avoid wrongly use. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-rng: move qdev properties into virtio-rng.cShannon Zhao
As only one place in virtio-rng.c uses DEFINE_VIRTIO_RNG_PROPERTIES, there is no need to expose it. Inline it into virtio-rng.c to avoid wrongly use. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-scsi: move qdev properties into virtio-scsi.cShannon Zhao
As only one place in virtio-scsi.c uses DEFINE_VIRTIO_SCSI_PROPERTIES and DEFINE_VIRTIO_SCSI_FEATURES, there is no need to expose them. Inline them into virtio-scsi.c to avoid wrongly use. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-net.h: Remove unsed DEFINE_VIRTIO_NET_PROPERTIESShannon Zhao
Remove unsed DEFINE_VIRTIO_NET_PROPERTIES in virtio-net.h and delete a space typo. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-net: move qdev properties into virtio-net.cShannon Zhao
As only one place in virtio-net.c uses DEFINE_VIRTIO_NET_FEATURES, there is no need to expose it. Inline it into virtio-net.c to avoid wrongly use. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-input: emulated devices [pci]Gerd Hoffmann
This patch adds virtio-pci support for the emulated virtio-input devices. Using them is as simple as adding "-device virtio-tablet-pci" to your command line. If you want add multiple devices but don't want waste a pci slot for each you can compose a multifunction device this way: qemu -device virtio-keyboard-pci,addr=0d.0,multifunction=on \ -device virtio-tablet-pci,addr=0d.1,multifunction=on Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-input: core code & base class [pci]Gerd Hoffmann
This patch adds the virtio-pci support bits for virtio-input-device. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10pci: add PCI_CLASS_INPUT_*Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: fill VirtIOPCIRegions early.Gerd Hoffmann
Initialize the modern bar and the VirtIOPCIRegion fields early, in realize. Also add a size field to VirtIOPCIRegion and variables for pci bars to VirtIOPCIProxy. This allows virtio-pci subclasses to change things before the device_plugged callback applies them. virtio-vga will use that to arrange regions in a way that virtio-vga is compatible to both stdvga (in vga mode) and virtio-gpu-pci (in pci mode). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: drop identical virtio_pci_capGerd Hoffmann
Now the three struct virtio_pci_caps are identical, lets drop two of them ;) Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: move cap type to VirtIOPCIRegionGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: move virtio_pci_add_mem_cap call to virtio_pci_modern_region_mapGerd Hoffmann
Also fill offset and length automatically, from VirtIOPCIRegion->offset and region size. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: add virtio_pci_modern_region_map()Gerd Hoffmann
Add function to map modern virtio regions. Add offset to VirtIOPCIRegion. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: add virtio_pci_modern_regions_init()Gerd Hoffmann
Add init function for the modern pci regions, move over the init code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: add struct VirtIOPCIRegion for virtio-1 regionsGerd Hoffmann
For now just place the MemoryRegion there, following patches will add more. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-balloon: switch to virtio_add_featureCornelia Huck
This was missed during the conversion of feature bit manipulation. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio_balloon: header updateMichael S. Tsirkin
add modern header Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: correctly set host notifiers for modern barJason Wang
Currently, during host notifier set. We only add eventfd for legacy bar, this is not correct since: - Non-transitional device does not have legacy bar, so qemu will crash since proxy->bar was not initialized. - Modern device uses modern bar and notify cap to notify the device, we should add eventfd for proxy->notify. So this patch fixes the above two issues by adding eventfd based on whether legacy or modern device were supported. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: make modern bar 64bit + prefetchableGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: change & document virtio pci bar layout.Gerd Hoffmann
This patch adds variables for the pci bars (to get rid of the magic numbers in the code) and moves the modern virtio bar to region 4 so regions 2+3 are kept free. virtio-vga wants use them. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: make QEMU_VIRTIO_PCI_QUEUE_MEM_MULT smallerGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: add flags to enable/disable legacy/modernGerd Hoffmann
Add VIRTIO_PCI_FLAG_DISABLE_LEGACY and VIRTIO_PCI_FLAG_DISABLE_MODERN for VirtIOPCIProxy->flags. Also add properties for them. They can be used to disable modern (virtio 1.0) or legacy (virtio 0.9) modes. By default only legacy is advertized, modern will be turned on by default once all remaining spec compilance issues are addressed. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: switch to modern accessors for 1.0Michael S. Tsirkin
virtio 1.0 config space is in LE format for all devices, use modern wrappers when accessed through the 1.0 BAR. Reported-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio: add modern config accessorsMichael S. Tsirkin
virtio 1.0 defines config space as LE, as opposed to pre-1.0 which was native endian. Add API for transports to execute word/dword accesses in little endian format - will be useful for mmio and pci (byte access is also wrapped, for completeness). For simplicity, we still keep config in host native endian format, byteswap to LE on guest access. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio: generation counter supportMichael S. Tsirkin
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: initial virtio 1.0 supportMichael S. Tsirkin
This is somewhat functional. With this, and linux driver from my tree, I was able to use virtio net as virtio 1.0 device for light browsing. At the moment, dataplane and vhost code is still missing. Based on Cornelia's virtio 1.0 patchset: Date: Thu, 11 Dec 2014 14:25:02 +0100 From: Cornelia Huck <cornelia.huck@de.ibm.com> To: virtualization@lists.linux-foundation.org, qemu-devel@nongnu.org Cc: rusty@rustcorp.com.au, thuth@linux.vnet.ibm.com, mst@redhat.com, Cornelia Huck <cornelia.huck@de.ibm.com> Subject: [PATCH RFC v6 00/20] qemu: towards virtio-1 host support Message-Id: <1418304322-7546-1-git-send-email-cornelia.huck@de.ibm.com> which is itself still missing some core bits. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10linux-headers: add virtio_pciMichael S. Tsirkin
Easier than duplicating code. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10vhost: 64 bit featuresCornelia Huck
Make sure that all vhost interfaces use 64 bit features, as the virtio core does, and make sure to use ULL everywhere possible to be on the safe side. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10vhost_net: add version_1 featureMichael S. Tsirkin
Add VERSION_1 to list of features that we should test at the backend. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-net: enable virtio 1.0Cornelia Huck
virtio-net (non-vhost) now should have everything in place to support virtio 1.0: let's enable the feature bit for it. Note that VIRTIO_F_VERSION_1 is technically a transport feature; once every device is ready for virtio 1.0, we can move setting this feature bit out of the individual devices. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-net: support longer headerCornelia Huck
virtio-1 devices always use num_buffers in the header, even if mergeable rx buffers have not been negotiated. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-net: no writeable mac for virtio-1Cornelia Huck
Devices operating as virtio 1.0 may not allow writes to the mac address in config space. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio: allow to fail setting statusCornelia Huck
virtio-1 allow setting of the FEATURES_OK status bit to fail if the negotiated feature bits are inconsistent: let's fail virtio_set_status() in that case and update virtio-ccw to post an error to the guest. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio: disallow late feature changes for virtio-1Cornelia Huck
For virtio-1 devices, the driver must not attempt to set feature bits after it set FEATURES_OK in the device status. Simply reject it in that case. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10dataplane: allow virtio-1 devicesCornelia Huck
Handle endianness conversion for virtio-1 virtqueues correctly. Note that dataplane now needs to be built per-target. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio: allow virtio-1 queue layoutCornelia Huck
For virtio-1 devices, we allow a more complex queue layout that doesn't require descriptor table and rings on a physically-contigous memory area: add virtio_queue_set_rings() to allow transports to set this up. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio: endianness checks for virtio 1.0 devicesCornelia Huck
Add code that checks for the VERSION_1 feature bit in order to make decisions about the device's endianness. This allows us to support transitional devices. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10Merge remote-tracking branch 'remotes/kraxel/tags/pull-fw_cfg-20150610-1' ↵Peter Maydell
into staging fw_cfg: drop write support, qemu cmdline support, bugfixes. bios-tables-test: fix smbios test. # gpg: Signature made Wed Jun 10 07:29:53 2015 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-fw_cfg-20150610-1: bios-tables-test: handle false-positive smbios signature matches fw_cfg: insert fw_cfg file blobs via qemu cmdline fw_cfg: prohibit insertion of duplicate fw_cfg file names fw_cfg: prevent selector key conflict fw_cfg: remove support for guest-side data writes fw_cfg: fix FW_CFG_BOOT_DEVICE update on ppc and sparc fw_cfg: add fw_cfg_modify_i16 (update) method QemuOpts: increase number of vm_config_groups Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-10Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20150609.0' ↵Peter Maydell
into staging Initial VFIO platform device support, v2 (Eric Auger, et al.) # gpg: Signature made Tue Jun 9 15:25:40 2015 BST using RSA key ID 3BB08B22 # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" # gpg: aka "Alex Williamson <alex@shazbot.org>" # gpg: aka "Alex Williamson <alwillia@redhat.com>" # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" * remotes/awilliam/tags/vfio-update-20150609.0: hw/vfio/platform: calxeda xgmac device hw/vfio/platform: add irq assignment hw/vfio/platform: vfio-platform skeleton Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-10Merge remote-tracking branch ↵Peter Maydell
'remotes/stefanha/tags/CVE-2015-3209-pcnet-tx-buffer-fix-pull-request' into staging # gpg: Signature made Wed Jun 10 15:04:11 2015 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/CVE-2015-3209-pcnet-tx-buffer-fix-pull-request: pcnet: force the buffer access to be in bounds during tx Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-18 02:53:23 +0000