aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-10-14target-mips/translate.c: Add ifdef guard around check_mips64()Peter Maydell
The function check_mips64() is only used if TARGET_MIPS64 is defined; add an ifdef guard to its definition to avoid warnings about it being unused in other configurations. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-10-14target-mips/op_helper.c: Remove unused do_lbu() functionPeter Maydell
The do_lbu() function defined by the expansion of HELPER_LD() is never used, so don't define it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-10-14target-mips/dsp_helper.c: Remove unused function get_DSPControl_24()Peter Maydell
The function get_DSPControl_24() is unused; remove it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-10-14target-mips: fix broken MIPS16 and microMIPSYongbok Kim
Commit 240ce26a broke MIPS16 and microMIPS support as it didn't care those branches and jumps don't have delay slot in MIPS16 and microMIPS. This patch introduces a new argument delayslot_size to the gen_compute_branch() indicating size of delay slot {0, 2, 4}. And the information is used to call handle_delay_slot() forcingly when no delay slot is required. There are some microMIPS branch and jump instructions that requires exact size of instruction in the delay slot. For indicating these instructions, MIPS_HFLAG_BDS_STRICT flag is introduced. Those fictional branch opcodes defined to support MIPS16 and microMIPS are no longer needed. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Tested-by: Jonas Gorski <jogo@openwrt.org> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> [leon.alrae@imgtec.com: cosmetic changes] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-10-14target-mips/translate.c: Update OPC_SYNCIDongxue Zhang
Update OPC_SYNCI with BS_STOP, in order to handle the instructions which saved in the same TB of the store instruction. Signed-off-by: Dongxue Zhang <elta.era@gmail.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [leon.alrae@imgtec.com: update microMIPS SYNCI as well] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-10-14target-mips: define a new generic CPU supporting MIPS64 Release 6 ISALeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-10-14mips_malta: update malta's pseudo-bootloader - replace JR with JALRLeon Alrae
JR has been removed in R6 and now this instruction will cause Reserved Instruction Exception. Therefore use JALR with rd=0 which is equivalent to JR. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-14target-mips: remove JR, BLTZAL, BGEZAL and add NAL, BAL instructionsYongbok Kim
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-14target-mips: do not allow Status.FR=0 mode in 64-bit FPULeon Alrae
Status.FR bit must be ignored on write and read as 1 when an implementation of Release 6 of the Architecture in which a 64-bit floating point unit is implemented. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-10-14target-mips: add new Floating Point Comparison instructionsYongbok Kim
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-14target-mips: add new Floating Point instructionsLeon Alrae
In terms of encoding MIPS32R6 MIN.fmt, MAX.fmt, MINA.fmt, MAXA.fmt replaced MIPS-3D RECIP1, RECIP2, RSQRT1, RSQRT2 instructions. In R6 all Floating Point instructions are supposed to be IEEE-2008 compliant i.e. FIR.HAS2008 always 1. However, QEMU softfloat for MIPS has not been updated yet. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-10-14softfloat: add functions corresponding to IEEE-2008 min/maxNumMagLeon Alrae
Add abs argument to the existing softfloat minmax() function and define new float{32,64}_{min,max}nummag functions. minnummag(x,y) returns x if |x| < |y|, returns y if |y| < |x|, otherwise minnum(x,y) maxnummag(x,y) returns x if |x| > |y|, returns y if |y| > |x|, otherwise maxnum(x,y) Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-14target-mips: add AUI, LSA and PCREL instruction familiesLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-10-13target-mips: add compact and CP1 branchesYongbok Kim
Introduce MIPS32R6 Compact Branch instructions which do not have delay slot - they have forbidden slot instead. However, current implementation does not support forbidden slot yet. Add also BC1EQZ and BC1NEZ instructions. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-10-13target-mips: add ALIGN, DALIGN, BITSWAP and DBITSWAP instructionsYongbok Kim
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-13target-mips: Status.UX/SX/KX enable 32-bit address wrappingLeon Alrae
In R6 the special behaviour for data references is also specified for Kernel and Supervisor mode. Therefore MIPS_HFLAG_UX is replaced by generic MIPS_HFLAG_AWRAP indicating enabled 32-bit address wrapping. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-13target-mips: move CLO, DCLO, CLZ, DCLZ, SDBBP and free special2 in R6Leon Alrae
Also consider OPC_SPIM instruction as deleted in R6 because it is overlaping with MIPS32R6 SDBBP. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-13target-mips: redefine Integer Multiply and Divide instructionsLeon Alrae
Use "R6_" prefix in front of all new Multiply / Divide instructions for easier differentiation between R6 and preR6. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-13target-mips: move PREF, CACHE, LLD and SCD instructionsLeon Alrae
The encoding of PREF, CACHE, LLD and SCD instruction changed in MIPS32R6. Additionally, the hint codes in PREF instruction greater than or equal to 24 generate Reserved Instruction Exception. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-13target-mips: signal RI Exception on DSP and Loongson instructionsLeon Alrae
Move DSP and Loongson instruction to *_legacy functions as they have been removed in R6. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-13target-mips: split decode_opc_special* into *_r6 and *_legacyLeon Alrae
For better code readability and to avoid 'if' statements for all R6 and preR6 instructions whose opcodes are the same - decode_opc_special* functions are split into functions with _r6 and _legacy suffixes. *_r6 functions will contain instructions which were introduced in R6. *_legacy functions will contain instructions which were removed in R6. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-13target-mips: extract decode_opc_special* from decode_opcLeon Alrae
Creating separate decode functions for special, special2 and special3 instructions to ease adding new R6 instructions and removing legacy instructions. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-13target-mips: move LL and SC instructionsLeon Alrae
The encoding of LL and SC instruction has changed in MIPS32 Release 6. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: James Hogan <james.hogan@imgtec.com>
2014-10-13target-mips: add SELEQZ and SELNEZ instructionsLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: James Hogan <james.hogan@imgtec.com>
2014-10-13target-mips: signal RI Exception on instructions removed in R6Leon Alrae
Signal Reserved Instruction Exception on instructions that do not exist in R6. In this commit the following groups of preR6 instructions are marked as deleted: - Floating Point Paired Single - Floating Point Compare - conditional moves / branches on FPU conditions - branch likelies - unaligned loads / stores - traps - legacy accumulator instructions - COP1X - MIPS-3D Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-13target-mips: define ISA_MIPS64R6Leon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-10Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20141010' into stagingPeter Maydell
various s390x updates: - cpu state handling in qemu and migration - vhost-scsi-ccw bugfix # gpg: Signature made Fri 10 Oct 2014 14:01:34 BST using RSA key ID C6F02FAF # gpg: Can't check signature: public key not found * remotes/cohuck/tags/s390x-20141010: s390x/virtio-ccw: fix vhost-scsi intialization s390x/migration: migrate CPU state s390x/kvm: synchronize the cpu state after SIGP (INITIAL) CPU RESET s390x/kvm: reuse kvm_s390_reset_vcpu() to get rid of ifdefs s390x/kvm: propagate s390 cpu state to kvm s390x/kvm: proper use of the cpu states OPERATING and STOPPED s390x/kvm: introduce proper states for s390 cpus linux-headers: update to 3.17-rc7 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-10kvm fix compilation with GCC 4.3.4Paolo Bonzini
As usual, SLES11's GCC complained about double typedefs: /home/cohuck/git/qemu/kvm-all.c:110: error: redefinition of typedef ‘KVMState’ /home/cohuck/git/qemu/include/sysemu/kvm.h:161: error: previous declaration of ‘KVMState’ was here Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-10s390x/virtio-ccw: fix vhost-scsi intializationCornelia Huck
The vhost-scsi-ccw backend is of type VHostSCSICcw, not VirtIOSCSICcw. This fixes a segfault when invoking qemu-system-s390x -device vhost-scsi-ccw,? Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-10-10s390x/migration: migrate CPU stateThomas Huth
This patch provides the cpu save information for dumps and later life migration and enables migration of the CPU state. The code is based on earlier work from Christian Borntraeger and Jason Herne. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> [provide cpu_post_load()] Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> CC: Andreas Faerber <afaerber@suse.de> CC: Christian Borntraeger <borntraeger@de.ibm.com> CC: Jason J. Herne <jjherne@us.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> [Cornelia Huck: tweaked cpu_post_load() comment] Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-10-10s390x/kvm: synchronize the cpu state after SIGP (INITIAL) CPU RESETDavid Hildenbrand
We need to synchronize registers after a reset has been performed. The current code does that in qemu_system_reset(), load_normal_reset() and modified_clear_reset() for all vcpus. After SIGP (INITIAL) CPU RESET, this needs to be done for the targeted vcpu as well, so let's call cpu_synchronize_post_reset() in the respective handlers. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> CC: Andreas Faerber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-10-10s390x/kvm: reuse kvm_s390_reset_vcpu() to get rid of ifdefsDavid Hildenbrand
This patch reuses kvm_s390_reset_vcpu() to get rid of some CONFIG_KVM and CONFIG_USER_ONLY ifdefs in cpu.c. In order to get rid of CONFIG_USER_ONLY, kvm_s390_reset_vcpu() has to provide a dummy implementation - the two definitions are moved to the proper section in cpu.h. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> CC: Andreas Faerber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-10-10s390x/kvm: propagate s390 cpu state to kvmDavid Hildenbrand
Let QEMU propagate the cpu state to kvm. If kvm doesn't yet support it, it is silently ignored as kvm will still handle the cpu state itself in that case. The state is not synced back, thus kvm won't have a chance to actively modify the cpu state. To do so, control has to be given back to QEMU (which is already done so in all relevant cases). Setting of the cpu state can fail either because kvm doesn't support the interface yet, or because the state is invalid/not supported. Failed attempts will be traced Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> CC: Andreas Faerber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-10-10s390x/kvm: proper use of the cpu states OPERATING and STOPPEDDavid Hildenbrand
This patch makes sure that halting a cpu and stopping a cpu are two different things. Stopping a cpu will also set the cpu halted - this is needed for common infrastructure to work (note that the stop and stopped flag cannot be used for our purpose because they are already used by other mechanisms). A cpu can be halted ("waiting") when it is operating. If interrupts are disabled, this is called a "disabled wait", as it can't be woken up anymore. A stopped cpu is treated like a "disabled wait" cpu, but in order to prepare for a proper cpu state synchronization with the kvm part, we need to track the real logical state of a cpu. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> CC: Andreas Faerber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-10-10s390x/kvm: introduce proper states for s390 cpusDavid Hildenbrand
Until now, when a s390 cpu was stopped or halted, the number of running CPUs was tracked in a global variable. This was problematic for migration, so Jason came up with a per-cpu running state. As it turns out, we want to track the full logical state of a target vcpu, so we need real s390 cpu states. This patch is based on an initial patch by Jason Herne, but was heavily rewritten when adding the cpu states STOPPED and OPERATING. On the way we move add_del_running to cpu.c (the declaration is already in cpu.h) and modify the users where appropriate. Please note that the cpu is still set to be stopped when it is halted, which is wrong. This will be fixed in the next patch. The LOAD and CHECK-STOP state will not be used in the first step. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> [folded Jason's patch into David's patch to avoid add/remove same lines] Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> CC: Andreas Faerber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-10-10linux-headers: update to 3.17-rc7Jens Freimann
Sync headers with 3.17-rc7 Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-10-09Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
Four changes here. Polling for reconnection of character devices, the QOMification of accelerators, a fix for -kernel support on x86, and one for a recently-introduced virtio-scsi optimization. # gpg: Signature made Thu 09 Oct 2014 14:36:50 BST using RSA key ID 4E6B09D7 # gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>" # gpg: aka "Paolo Bonzini <bonzini@gnu.org>" * remotes/bonzini/tags/for-upstream: (28 commits) qemu-char: Fix reconnect socket error reporting qemu-sockets: Add error to non-blocking connect handler qemu-error: Add error_vreport() virtio-scsi: fix use-after-free of VirtIOSCSIReq linuxboot: compute initrd loading address kvm: Make KVMState be the TYPE_KVM_ACCEL instance struct accel: Create accel object when initializing machine accel: Pass MachineState object to accel init functions accel: Rename 'init' method to 'init_machine' accel: Move accel init/allowed code to separate function accel: Remove tcg_available() function accel: Move qtest accel registration to qtest.c accel: Move Xen registration code to xen-common.c accel: Move KVM accel registration to kvm-all.c accel: Report unknown accelerator as "not found" instead of "does not exist" accel: Make AccelClass.available() optional accel: Use QOM classes for accel types accel: Move accel name lookup to separate function accel: Simplify configure_accelerator() using AccelType *acc variable accel: Create AccelType typedef ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-09qemu-char: Fix reconnect socket error reportingCorey Minyard
If reconnect was set, errors wouldn't always be reported. Fix that and also only report a connect error once until a connection has been made. The primary purpose of this is to tell the user that a connection failed so they can know they need to figure out what went wrong. So we don't want to spew too much out here, just enough so they know. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-09qemu-sockets: Add error to non-blocking connect handlerCorey Minyard
An error value here would be quite handy and more consistent with the rest of the code. Signed-off-by: Corey Minyard <cminyard@mvista.com> [Make sure SO_ERROR value is passed to error_setg_errno. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-09qemu-error: Add error_vreport()Corey Minyard
Needed to nicely print socket error reports. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-09virtio-scsi: fix use-after-free of VirtIOSCSIReqPaolo Bonzini
scsi_req_continue can complete the request and cause the VirtIOSCSIReq to be freed. Fetch req->sreq just once to avoid the bug. Reported-by: Richard Jones <rjones@redhat.com> Tested-by: Richard Jones <rjones@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-09linuxboot: compute initrd loading addressPaolo Bonzini
Even though hw/i386/pc.c tries to compute a valid loading address for the initrd, close to the top of RAM, this does not take into account other data that is malloced into that memory by SeaBIOS. Luckily we can easily look at the memory map to find out how much memory is used up there. This patch places the initrd in the first four gigabytes, below the first hole (as returned by INT 15h, AX=e801h). Without this patch: [ 0.000000] init_memory_mapping: [mem 0x07000000-0x07fdffff] [ 0.000000] RAMDISK: [mem 0x0710a000-0x07fd7fff] With this patch: [ 0.000000] init_memory_mapping: [mem 0x07000000-0x07fdffff] [ 0.000000] RAMDISK: [mem 0x07112000-0x07fdffff] So linuxboot is able to use the 64k that were added as padding for QEMU <= 2.1. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-09kvm: Make KVMState be the TYPE_KVM_ACCEL instance structEduardo Habkost
Now that we create an accel object before calling machine_init, we can simply use the accel object to save all KVMState data, instead of allocationg KVMState manually. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-09accel: Create accel object when initializing machineEduardo Habkost
Create an actual TYPE_ACCEL object when initializing a machine. This will allow accelerator classes to implement some initialization on instance_init, and to save state on the TYPE_ACCEL object. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-09accel: Pass MachineState object to accel init functionsEduardo Habkost
Most of the machine options and machine state information is in the MachineState object, not on the MachineClass. This will allow init functions to use the MachineState object directly instead of qemu_get_machine_opts() or the current_machine global. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-07Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20141006-2' ↵Peter Maydell
into staging linux-user pull for 2.2 Clearest linux-user patches sent to the list since august, Apart from Mikhails patch, the rest are quite trivial. v2: check for CONFIG_TIMERFD only after it has been defined # gpg: Signature made Mon 06 Oct 2014 20:08:10 BST using RSA key ID DE3C9BC0 # gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>" # gpg: aka "Riku Voipio <riku.voipio@linaro.org>" * remotes/riku/tags/pull-linux-user-20141006-2: translate-all.c: memory walker initial address miscalculation linux-user: don't include timerfd if not needed linux-user: Simplify timerid checks on g_posix_timers range linux-user: Convert blkpg to use a special subop handler linux-user: Enable epoll_pwait syscall for ARM Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-06translate-all.c: memory walker initial address miscalculationMikhail Ilyin
The initial base address is miscalculated in walk_memory_regions(). It has to be shifted TARGET_PAGE_BITS more. Holder variables are extended to target_ulong size otherwise they don't fit for MIPS N32 (a 32-bit ABI with a 64-bit address space) and qemu won't compile. The issue led to incorrect debug output of memory maps and a mis-formed coredumped file. Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-10-06linux-user: don't include timerfd if not neededRiku Voipio
Without this, builds on older systems fail with: qemu/linux-user/syscall.c:61:25: warning: sys/timerfd.h: No such file or directory v2: fix the usual case where CONFIG_TIMERFD is enabled.. Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-10-06linux-user: Simplify timerid checks on g_posix_timers rangeAlexander Graf
We check whether the passed in timer id is negative on all calls that involve g_posix_timers. However, these checks are bogus. First off we limit the timer_id to 16 bits which is not what Linux does. Then we check whether it's negative which it can't be because we masked it. We can safely remove the masking. For the negativity check we can just treat the timerid as unsigned and only check for upper boundaries. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-10-06linux-user: Convert blkpg to use a special subop handlerAlexander Graf
The blkpg ioctl can take different payloads depending on the opcode in its payload structure. Create a new special ioctl handler that can only deal with partition style ones for now. This patch fixes running parted for me. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-21 00:52:07 +0000