aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-04-22vmstate: port pxa2xx_i2sJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port stellaris gptmJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port cudaJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port heathrow_picJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port pl022 sspJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port stellaris sysJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port stellaris ssi busJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port stellaris i2cJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port armv7m nvicJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port pl011Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port pxa2xx_keypadJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port syborg_rtcJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port pmtimerJuan Quintela
It was a half conversion. Finish it. enabled can only get values of 0, 1 or 2, was declared as an int but sent as an unint8_t, change its type. Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port sysborg_timerJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port arm_timerJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port arm sp804Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port mipsnetJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port m48t59Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port ads7846Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port adb_mouseJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22vmstate: port adb_kbdJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-20target-arm: Set Invalid flag for NaN in float-to-int conversionsPeter Maydell
When we catch the special case of an input NaN in ARM float to int helper functions, set the Invalid flag as well as returning the correct result. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-20hw/arm_boot.c: move initrd load address up to accommodate large kernelsPeter Maydell
Newer kernels are large enough that they can overlap the address where qemu places the initrd. Move the initrd up so that there is enough space for the kernel again. Unfortunately it's not possible to automatically determine the size of the kernel if it is compressed, so this is the best we can do. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-20Basic implementation of Sharp Zaurus SL-5500 collie PDADmitry Eremin-Solenikov
Add very basic implementation of collie PDA emulation. The system lacks LoCoMo and graphics/sound emulation. Linux kernel boots up to mounting rootfs (theoretically it can be provided in pflash images). Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-20Implement basic part of SA-1110/SA-1100Dmitry Eremin-Solenikov
Basic implementation of DEC/Intel SA-1100/SA-1110 chips emulation. Implemented: - IRQs - GPIO - PPC - RTC - UARTs (no IrDA/etc.) - OST reused from pxa25x Everything else is TODO (esp. PM/idle/sleep!) - see the todo in the hw/strongarm.c Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-20Remove unused function parameter from cpu_restore_stateStefan Weil
The previous patch removed the need for parameter puc. Is is now unused, so remove it. Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <weil@mail.berlios.de>
2011-04-20Remove unused function parameters from gen_pc_load and rename the functionStefan Weil
Function gen_pc_load was introduced in commit d2856f1ad4c259e5766847c49acbb4e390731bd4. The only reason for parameter searched_pc was a debug statement in target-i386/translate.c. Parameter puc was needed by target-sparc until commit d7da2a10402f1644128b66414ca8f86bdea9ae7c. Remove searched_pc from the debug statement and remove both parameters from the parameter list of gen_pc_load. As the function name gen_pc_load was also misleading, it is now called restore_state_to_opc. This new name was suggested by Peter Maydell, thanks. v2: Remove last parameter, too, and rename the function. v3: Fix [] typo in target-arm/translate.c. Fix wrong SHA1 object name in commit message (copy+paste error). Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <weil@mail.berlios.de>
2011-04-18s390x: virtio machine storage keysAlexander Graf
For emulation (and migration) we need to know about the guest's storage keys. These are separate from actual RAM contents, so we need to allocate them in parallel to RAM. While touching the file, this patch also adjusts the hypercall function to a new syntax that aligns better with tcg emulated code. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-18s390x: Dispatch interrupts to KVM or the real CPUAlexander Graf
The KVM interrupt injection path is non-generic for now. So we need to push knowledge of how to inject a device interrupt using KVM into the actual device code. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-18s390x: Enable s390x-softmmu targetAlexander Graf
This patch adds some code paths for running s390x guest OSs without the need for KVM. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-18s390x: Prepare cpu.h for emulationAlexander Graf
We need to add some more logic to the CPU description to leverage emulation of an s390x CPU. This patch adds all the required helpers, fields in CPUState and constant definitions required for user and system emulation. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17move helpers.h to helper.hLluís
This provides a consistent naming scheme across all targets. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17libcacard: fix opposite usage of isspaceAlon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17target-mips: clear softfpu exception state for comparison instructionsAurelien Jarno
MIPS FPU instructions should start with a clean softfpu status. This is done for the most instructions, but not for comparison ones. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17target-mips: fix c.ps.* instructionsAurelien Jarno
Contrary to cabs.ps.* instructions, c.ps.* should not compare the absolute value of the operand, but directly the operands. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17target-mips: don't hardcode softfloat exception bitsAurelien Jarno
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17target-mips: simplify FP comparisonsAurelien Jarno
As the softfloat comparison functions already test for NaN, there is no need to always call the float*_unordered*() functions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17target-ppc: fix SPE comparison functionsAurelien Jarno
efstst*() functions are fast SPE funtions which do not take into account special values (infinites, NaN, etc.), while efscmp*() functions are IEEE754 compliant. Given that float32_*() functions are IEEE754 compliant, the efscmp*() functions are correctly implemented, while efstst*() are not. This patch reverse the implementation of this two groups of functions and fix the comments. It also use float32_eq() instead of float32_eq_quiet() as qNaNs should not be ignored. Cc: Alexander Graf <agraf@suse.de> Cc: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17softfloat: improve description of comparison functionsAurelien Jarno
Make clear for all comparison functions which ones trigger an exception for all NaNs, and which one only for sNaNs. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17softfloat: move float*_eq and float*_eq_quietAurelien Jarno
I am not a big fan of code moving, but having the signaling version in the middle of quiet versions and vice versa doesn't make the code easy to read. This patch is a simple code move, basically swapping locations of float*_eq and float*_eq_quiet. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17softfloat: rename float*_eq_signaling() into float*_eq()Aurelien Jarno
float*_eq_signaling functions have a different semantics than other comparison functions. Fix that by renaming float*_quiet_signaling() into float*_eq(). Note that it is purely mechanical, and the behaviour should be unchanged. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17softfloat: rename float*_eq() into float*_eq_quiet()Aurelien Jarno
float*_eq functions have a different semantics than other comparison functions. Fix that by first renaming float*_quiet() into float*_eq_quiet(). Note that it is purely mechanical, and the behaviour should be unchanged. That said it clearly highlight problems due to this different semantics, they are fixed later in this patch series. Cc: Alexander Graf <agraf@suse.de> Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17target-i386: fix CMPUNORDPS/D and CMPORDPS/D instructionsAurelien Jarno
SSE instructions CMPUNORDPS/D and CMPORDPS/D do not trigger an invalid exception if operands are qNANs. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17target-mips: use new float*_unordered*() functionsAurelien Jarno
Use the new float*_unordered*() functions from softfloat instead of redefining a private version. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17target-alpha: use new float64_unordered_quiet() functionAurelien Jarno
Use float64_unordered_quiet() in helper_cmptun() instead of doing the the comparison manually. According to the "Alpha Compiler Writer's Guide", we should use the _quiet version here, as CMPTUN and CMPTEQ should generate InvalidOp for SNaNs but not for QNaNs. Thanks to Peter Maydell <peter.maydell@linaro.org> and Richard Henderson <rth@twiddle.net> for digging into the manuals. Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17softfloat-native: add float*_unordered_quiet() functionsAurelien Jarno
Add float*_unordered_quiet() functions to march the softfloat versions. As FPU status is not tracked with softfloat-native, they don't differ from the signaling version. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17softfloat: add float*_unordered_{,quiet}() functionsAurelien Jarno
Add float*_unordered() functions to softfloat, matching the softfloat-native ones. Also add float*_unordered_quiet() functions to match the others comparison functions. This allow target-i386/ops_sse.h to be compiled with softfloat. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17target-i386: add floatx_{add,mul,sub} and use themAurelien Jarno
Add floatx_{add,mul,sub} defines, and use them instead of using direct C operations. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17target-i386: use float unions from cpu-all.hAurelien Jarno
Use float unions from cpu-all.h instead of redefining new (wrong for arm) ones in target-i386. This also allows building cpu-exec.o with softfloat. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17target-i386: use CPU_LDoubleU instead of a private unionAurelien Jarno
Use CPU_LDoubleU in cpu_dump_state() instead of redefining a union for doing the conversion. Based on a patch from Laurent Vivier <laurent@vivier.eu>. Cc: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-25 22:04:40 +0000