aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-09-12hw: Trim superfluous #include "block_int.h"Markus Armbruster
Including it in device models is unclean, including it without a reason adds insult to injury. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Move BlockConf & friends from block_int.h to block.hMarkus Armbruster
It's convenience stuff for block device models, so block.h isn't the ideal home either, but better than block_int.h. Permits moving some #include "block_int.h" from device model .h into .c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Show whether the virtual tray is open in info blockMarkus Armbruster
Need to ask the device, so this requires new BlockDevOps member is_tray_open(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Drop BlockDriverState member removableMarkus Armbruster
It's a confused mess (see previous commit). No users remain. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Clean up remaining users of "removable"Markus Armbruster
BlockDriverState member removable is a confused mess. It is true when an ide-cd, scsi-cd or floppy qdev is attached, or when the BlockDriverState was created with -drive if={floppy,sd} or -drive if={ide,scsi,xen,none},media=cdrom ("created removable"), except when an ide-hd, scsi-hd, scsi-generic or virtio-blk qdev is attached. Three users remain: 1. eject_device(), via bdrv_is_removable() uses it to determine whether a block device can eject media. 2. bdrv_info() is monitor command "info block". QMP documentation says "true if the device is removable, false otherwise". From the monitor user's point of view, the only sensible interpretation of "is removable" is "can eject media with monitor commands eject and change". A block device can eject media unless a device is attached that doesn't support it. Switch the two users over to new bdrv_dev_has_removable_media() that returns exactly that. 3. bdrv_getlength() uses to suppress its length cache when media can change (see commit 46a4e4e6). Media change is either monitor command change (updates the length cache), monitor command eject (doesn't update the length cache, easily fixable), or physical media change (invalidates length cache, not so easily fixable). I'm refraining from improving anything here, because this series is long enough already. Instead, I simply switch it over to bdrv_dev_has_removable_media() as well. This changes the behavior of the length cache and of monitor commands eject and change in two cases: a. drive not created removable, no device attached The commit makes the drive removable, and defeats the length cache. Example: -drive if=none b. drive created removable, but the attached drive is non-removable, and doesn't call bdrv_set_removable(..., 0) (most devices don't) The commit makes the drive non-removable, and enables the length cache. Example: -drive if=xen,media=cdrom -M xenpv The other non-removable devices that don't call bdrv_set_removable() can't currently use a drive created removable, either because they aren't qdevified, or because they lack a drive property. Won't stay that way. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Preserve tray state on migrationMarkus Armbruster
Use a subsection, so that migration to older version still works, provided the tray is closed and unlocked. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12scsi-disk: Fix START_STOP to fail when it can't ejectMarkus Armbruster
Don't fail when tray is already open. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Don't fail eject when tray is already openMarkus Armbruster
MMC-5 6.40.2.6 specifies that START STOP UNIT succeeds when the drive already has the requested state. cmd_start_stop_unit() fails when asked to eject while the tray is open and locked. Fix that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12rbd: fix leak in qemu_rbd_open failure pathsSage Weil
Fix leak of s->snap in failure path. Simplify error paths for the whole function. Reported-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12rbd: clean up, fix styleSage Weil
No assignment in condition. Remove duplicate ret > 0 check. Signed-off-by: Sage Weil <sage@newdream.net> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12rbd: allow client id to be specified in config stringSage Weil
Allow the client id to be specified in the config string via 'id=' so that users can control who they authenticate as. Currently they are stuck with the default ('admin'). This is necessary for anyone using authentication in their environment. Signed-off-by: Sage Weil <sage@newdream.net> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Rename bdrv_set_locked() to bdrv_lock_medium()Markus Armbruster
While there, make the locked parameter bool. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Drop medium lock tracking, ask device models insteadMarkus Armbruster
Requires new BlockDevOps member is_medium_locked(). Implement for IDE and SCSI CD-ROMs. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Leave enforcing tray lock to device modelsMarkus Armbruster
The device model knows best when to accept the guest's eject command. No need to detour through the block layer. bdrv_eject() can't fail anymore. Make it void. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12scsi-disk: Track tray locked stateMarkus Armbruster
We already track it in BlockDriverState. Just like tray open/close state, we should track it in the device models instead, because it's device state. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Track tray locked stateMarkus Armbruster
We already track it in BlockDriverState. Just like tray open/close state, we should track it in the device models instead, because it's device state. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Drop tray status tracking, no longer usedMarkus Armbruster
Commit 4be9762a is now completely redone. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Revert entanglement of bdrv_is_inserted() with tray statusMarkus Armbruster
Commit 4be9762a changed bdrv_is_inserted() to fail when the tray is open. Unfortunately, there are two different kinds of users, with conflicting needs. 1. Device models using bdrv_eject(), currently ide-cd and scsi-cd. They expect bdrv_is_inserted() to reflect the tray status. Commit 4be9762a makes them happy. 2. Code that wants to know whether a BlockDriverState has media, such as find_image_format(), bdrv_flush_all(). Commit 4be9762a makes them unhappy. In particular, it breaks flush on VM stop for media ejected by the guest. Revert the change to bdrv_is_inserted(). Check the tray status in the device models instead. Note on IDE: Since only ATAPI devices have a tray, and they don't accept ATA commands since the recent commit "ide: Reject ATA commands specific to drive kinds", checking in atapi.c suffices. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12scsi-disk: Track tray open/close stateMarkus Armbruster
We already track it in BlockDriverState since commit 4be9762a. As discussed in that commit's message, we should track it in the device device models instead, because it's device state. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12scsi-disk: Factor out scsi_disk_emulate_start_stop()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Track tray open/close stateMarkus Armbruster
We already track it in BlockDriverState since commit 4be9762a. As discussed in that commit's message, we should track it in the device device models instead, because it's device state. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Clean up misleading name in cmd_start_stop_unit()Markus Armbruster
"eject" is misleading; it means "eject" when start is clear, but "load" when start is set. Rename to loej, because that's how MMC-5 calls it, in section 6.40. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide: Reject ATA commands specific to drive kindsMarkus Armbruster
ACS-2 Table B.2 explicitly prohibits ATAPI devices from implementing WIN_RECAL, WIN_READ_EXT, WIN_READDMA_EXT, WIN_READ_NATIVE_MAX, WIN_MULTREAD_EXT, WIN_WRITE, WIN_WRITE_ONCE, WIN_WRITE_EXT, WIN_WRITEDMA_EXT, WIN_MULTWRITE_EXT, WIN_WRITE_VERIFY, WIN_VERIFY, WIN_VERIFY_ONCE, WIN_VERIFY_EXT, WIN_SPECIFY, WIN_MULTREAD, WIN_MULTWRITE, WIN_SETMULT, WIN_READDMA, WIN_READDMA_ONCE, WIN_WRITEDMA, WIN_WRITEDMA_ONCE, WIN_FLUSH_CACHE_EXT. Restrict them to IDE_HD and IDE_CFATA. Same for CFA_WRITE_SECT_WO_ERASE, CFA_WRITE_MULTI_WO_ERASE. Restrict them to IDE_CFATA, like the other CFA_ commands. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide: Use a table to declare which drive kinds accept each commandMarkus Armbruster
No functional change. It would be nice to have handler functions in the table, like commit e1a064f9 did for ATAPI. Left for another day. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide: Fix ATA command READ to set ATAPI signature for CD-ROMMarkus Armbruster
Must set the ATAPI device signature, see ATA4 8.27.5.2 Outputs for PACKET Command feature set devices, and ACS-2 7.36.6 Outputs for PACKET feature set devices. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12qcow2: removed unused depends_on fieldFrediano Ziglio
Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-10Gdbstub: Fix back-trace on SPARC32Fabien Chouteau
Gdb expects all registers windows to be flushed in ram, which is not the case in Qemu. Therefore the back-trace generation doesn't work. This patch adds a function to handle reads (and only read) in stack frames as if windows were flushed. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: add regression testsuiteMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10MAINTAINERS: add xtensa maintainerMax Filippov
Add myself as target-xtensa and DC232B maintainer. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: add dc232b core and boardMax Filippov
This is Diamond 232L Standard Core Rev.B (LE). Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement boolean optionMax Filippov
See ISA, 4.3.9 Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement memory protection optionsMax Filippov
- TLB opcode group; - region protection option (ISA, 4.6.3); - region translation option (ISA, 4.6.4); - MMU option (ISA, 4.6.5). Cache control attribute bits are not used by this implementation. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: add gdb supportMax Filippov
Specific xtensa processor overlay for GDB contains register map in the gdb/xtensa-config.c. This description is used by the GDB to e.g. parse 'g' response packets and it may be reused in the qemu's gdbstub (only XTREG definitions for non-pseudoregisters are needed). Currently mainline GDB does not support operations with privileged SRs (see http://sourceware.org/ml/gdb/2011-07/msg00075.html). This support may be enabled, see NUM_CORE_REGS comment in the gdbstub.c Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement relocatable vectorsMax Filippov
See ISA, 4.4.3 for details. Vector addresses recorded in core configuration are absolute values that correspond to default VECBASE value. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement CPENABLE and PRID SRsMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement accurate window checkMax Filippov
See ISA, 4.7.1.3 for details. Window check is inserted before commands that push "used register watermark" beyond its current level. Used register watermark is reset on instructions that change WINDOW_BASE/WINDOW_START SRs. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement interrupt optionMax Filippov
See ISA, 4.4.6 (interrupt option), 4.4.7 (high priority interrupt option) and 4.4.8 (timer interrupt option) for details. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement SIMCALLMax Filippov
Tensilica iss provides support for applications running in freestanding environment through SIMCALL command. It is used by Tensilica libc to access argc/argv, for file I/O, etc. Note that simcalls that accept buffer addresses expect virtual addresses. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement unaligned exception optionMax Filippov
See ISA, 4.4.4 for details. Correct (aligned as per ISA) address for unaligned access is generated in case this option is not enabled. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement extended L32RMax Filippov
See ISA, 4.3.3 for details. TB flag XTENSA_TBFLAG_LITBASE is used to track enable bit of LITBASE SR. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement loop optionMax Filippov
See ISA, 4.3.2 for details. Operations that change LEND SR value invalidate TBs at the old and at the new LEND. LEND value at TB compilation time is considered constant and loop instruction is generated based on this value. Invalidation may be avoided for the TB at the old LEND address, since looping code verifies actual LEND value. Invalidation may be avoided for the TB at the new LEND address if there's a way to associate LEND address with TB at compilation time and later verify that it doesn't change. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement windowed registersMax Filippov
See ISA, 4.7.1 for details. Physical registers and currently visible window are separate fields in CPUEnv. Only current window is accessible to TCG. On operations that change window base helpers copy current window to and from physical registers. Window overflow check described in 4.7.1.3 is in separate patch. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement RST2 group (32 bit mul/div/rem)Max Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement exceptionsMax Filippov
- mark privileged opcodes with ring check; - make debug exception on exception handler entry. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: add PS register and access controlMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement CACHE groupMax Filippov
All operations in this group are no-ops, because cache ought to be transparent to applications. However cache may be abused, then we'll need to actually implement these opcodes. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement SYNC groupMax Filippov
All operations in this group are no-ops, because there are no delayed side effects. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: mark reserved and TBD opcodesMax Filippov
Reserved opcodes must generate illegal instruction exception. Usually they signal emulation quality problems. Not implemented opcodes are good to see. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement LSAI groupMax Filippov
- base + offset load/store operations for 1/2/4 byte values; - cache operations (not implemented); - multiprocessor synchronization operations. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement shifts (ST1 and RST1 groups)Max Filippov
- ST1: SAR (shift amount special register) manipulation, NSA(U); - RST1: shifts, 16-bit multiplication. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-02 04:13:50 +0000