aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-02-16libqos/ahci: Add ahci_guest_ioJohn Snow
ahci_guest_io is a shorthand function that will, in one shot, execute a data command on the guest to the specified guest buffer location, in the requested amount. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-16-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: add ahci command size settersJohn Snow
Adds setters for size, prd_size and both via set_sizes. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1423158090-25580-15-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: add ahci command verifyJohn Snow
Helps to verify that a command completed successfully. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-14-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: add ahci command functionsJohn Snow
This patch adds the AHCICommand structure, and a set of functions to operate on the structure. ahci_command_create - Initialize and create a new AHCICommand in memory ahci_command_free - Destroy this object. ahci_command_set_buffer - Set where the guest memory DMA buffer is. ahci_command_commit - Write this command to the AHCI HBA. ahci_command_issue - Issue the committed command synchronously. ahci_command_issue_async - Issue the committed command asynchronously. ahci_command_wait - Wait for an asynchronous command to finish. ahci_command_slot - Get the number of the command slot we committed to. Helpers: size_to_prdtl - Calculate the required minimum PRDTL size from a buffer size. ahci_command_find - Given an ATA command mnemonic, look it up in the properties table to obtain info about the command. command_header_init - Initialize the command header with sane values. command_table_init - Initialize the command table with sane values. [Peter Maydell <peter.maydell@linaro.org> reported the following clang warning: tests/libqos/ahci.c:598:3: warning: redefinition of typedef 'AHCICommand' is a C11 feature [-Wtypedef-redefinition] } AHCICommand; I have replaced typedef struct ... AHCICommand; with struct ... ; --Stefan] Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1423158090-25580-13-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add ide cmd propertiesJohn Snow
Add a structure that defines some properties of various IDE commands. These will be used to simplify the interface to the libqos AHCI calls, lessening the redundancy of specifying and respecifying properties of commands to various helper functions. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1423158090-25580-12-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: add ahci_write_fisJohn Snow
Similar to ahci_set_command_header, add a helper that takes an in-memory representation of a command FIS and writes it to guest memory, handling endianness as-needed. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1423158090-25580-11-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: Demagic ahci tests.John Snow
Add human-readable command names and other miscellaneous #defines to help make the code more readable. Some of these definitions are not yet used in this current series, but for convenience and sanity they have been lumped together here, as it's more trouble than it is worth in a test suite to hand-pick, one-by-one, which preprocessor definitions are useful per-each test. These definitions include: ATA Command Mnemonics Current expected AHCI sector size FIS magic bytes REG_H2D_FIS flags Command Header flags Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1423158090-25580-10-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add cmd response sanity check helpersJohn Snow
This patch adds a few helpers to help sanity-check the response of the AHCI device after a command. ahci_d2h_check_sanity inspects the D2H Register FIS, ahci_pio_check_sanity inspects the PIO Setup FIS, and ahci_cmd_check_sanity inspects the command header. To support the PIO sanity check, a new structure is added for the PIO Setup FIS type. Existing FIS types (H2D and D2H) have had their members renamed slightly to condense reserved members into fewer fields; and LBA fields are now represented by arrays of 8 byte chunks instead of independent variables. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-9-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add port_check_nonbusy helperJohn Snow
A simple helper that asserts a given port is not busy processing any commands via the TFD, Command Issue and SACT registers. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-8-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add ahci_port_check_interrupts helperJohn Snow
A helper that compares a given port's current interrupts and checks them against a supplied list of expected interrupt bits, and throws an error if they do not match. The helper then resets the requested interrupts on this port, and asserts that the interrupt register is now empty. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-7-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add ahci_port_check_error helperJohn Snow
ahci_port_check_error checks a given port's error registers and asserts that everything from the port-level view is still OK. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add command header helpersJohn Snow
Adds command header helper functions: -ahci_command_header_set -ahci_command_header_get, -ahci_command_destroy, and -ahci_cmd_pick These helpers help to quickly manage the command header information in the AHCI device. ahci_command_header_set and get will store or retrieve an AHCI command header, respectively. ahci_cmd_pick chooses the first available but least recently used command slot to allow us to cycle through the available command slots. ahci_command_destroy obliterates all information contained within a given slot's command header, and frees its associated command table, but not its DMA buffer! Lastly, the command table pointer fields (dba and dbau) are merged into a single 64bit value to make managing 64bit tests simpler. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1423158090-25580-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: rename 'Command' to 'CommandHeader'John Snow
The structure name is a bit of a misnomer; the structure currently named command is actually the commandheader. A future patch in this series will add an actual "Command" structure, so we'll rename it now before the rest of the functions in this series try to use it. In addition, rename the "b1" and "b2" fields to be a unified uint16_t named "flags." Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1423158090-25580-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add ahci_port_clear helperJohn Snow
Add a helper that assists in clearing out potentially old error and FIS information from an AHCI port's data structures. This ensures we always start with a blank slate for interrupt and FIS receipt information. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-3-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add ahci_port_select helperJohn Snow
This helper identifies which port of the AHCI HBA has a device we may run tests on. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-2-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16dataplane: endianness-aware accessesCornelia Huck
The vring.c code currently assumes that guest and host endianness match, which is not true for a number of cases: - emulating targets with a different endianness than the host - bi-endian targets, where the correct endianness depends on the virtio device - upcoming support for the virtio-1 standard mandates little-endian accesses even for big-endian targets and hosts Make sure to use accessors that depend on the virtio device. Note that dataplane now needs to be built per-target. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Fam Zheng <famz@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1422289602-17874-2-git-send-email-cornelia.huck@de.ibm.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: create libqos/ahci.cJohn Snow
With global state removed, code responsible for booting up, verifying, and initializing the AHCI HBA is extracted and inserted into libqos/ahci.c, which would allow for other qtests in the future to quickly grab a meaningfully initialized reference to an AHCI HBA. Even without other users, functionalizing and isolating the code assists future AHCI tests that exercise Q35 migration. For now, libqos/ahci.o will be PC-only, but can be expanded into something arch-agnostic in the future, if needed. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-16-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: Bookmark FB and CLB pointersJohn Snow
Instead of re-querying the AHCI device for the FB and CLB buffers, save the pointer we gave to the device during initialization and reference these values instead. [Peter Maydell <peter.maydell@linaro.org> reported the following clang compiler warnings: tests/libqos/ahci.c:256:40: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat] g_test_message("CLB: 0x%08lx", ahci->port[i].clb); tests/libqos/ahci.c:264:39: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat] g_test_message("FB: 0x%08lx", ahci->port[i].fb); The commit moved from uint32_t to uint64_t, so PRIx64 should be used for the format specifier. --Stefan] Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-15-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: remove getter/setter macrosJohn Snow
These macros were a bad idea: They relied upon certain arguments being present locally with a specific name. With the endgoal being to factor out AHCI helper functions outside of the test file itself, these have to be replaced by more explicit helper setter/getter functions. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-14-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Functional register helpersJohn Snow
Introduce a set of "static inline" register helpers that are intended to replace the current set of macros with more functional versions that are better suited to inclusion in libqos than porcelain macros. As a stopgap measure before eliminating the porcelain macros, define them to use the new functions defined in the ahci.h header. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-13-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: remove guest_malloc globalJohn Snow
Make helper routines rely on the earmarked guest allocator object with AHCIQState/QOSSTate instead. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-12-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: remove pcibus globalJohn Snow
Rely on the PCI Device's bus pointer instead. One less global to worry about. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-11-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: finalize AHCIQState consolidationJohn Snow
Move barsize, ahci_fingerprint and capabilities registers into the AHCIQState object, removing global ahci-related state from the ahci-test.c file. More churn, less globals. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-10-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: Store hba_base in AHCIQStateJohn Snow
Store the HBA memory base address in the new state object, to simplify function prototypes and encourage a more functional testing style. This causes a lot of churn, but this patch is as "simplified" as I could get it to be. This patch is therefore fairly mechanical and straightforward: Any case where we pass "hba_base" has been consolidated into the AHCIQState object and we pass the one unified parameter. Any case where we reference "ahci" and "hba_state" have been modified to use "ahci->dev" for the PCIDevice and "ahci->hba_state" to get at the base memory address, accordingly. Notes: - A needless return is removed from start_ahci_device. - For ease of reviewing, this patch can be reproduced (mostly) by: # Replace (ahci, hba_base) prototypes with unified parameter 's/(QPCIDevice \*ahci, void \*\?\*hba_base/(AHCIQState *ahci/' # Replace (ahci->dev, hba_base) calls with unified parameter 's/(ahci->dev, &\?hba_base)/(ahci)/' # Replace calls to PCI config space using "ahci" with "ahci->dev" 's/qpci_config_\(read\|write\)\(.\)(ahci,/qpci_config_\1\2(ahci->dev,/' After these, the remaining differences are easy to review by hand. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-9-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos: add pc specific interfaceJohn Snow
Create an operations structure so that the libqos interface can be architecture agnostic, and create a pc-specific interface to functions like qtest_boot. Move the libqos object in the Makefile from being ahci-test only to being linked with all tests that utilize the libqos features. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-8-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos: Update QGuestAllocator to be opaqueJohn Snow
To avoid the architecture-specific implementations of the generic qtest allocator having to know about fields within the allocator, add a page_size setter method for users or arch specializations to use. The allocator will assume a default page_size for general use, but it can always be overridden. Since this was the last instance of code directly using properties of the QGuestAllocator object directly, modify the type to be opaque and move the structure inside of malloc.c. mlist_new, which was previously exported, is made static local to malloc.c, as it has no external users. [Peter Maydell <peter.maydell@linaro.org> reported the following clang warning: tests/libqos/malloc.c:35:3: warning: redefinition of typedef 'QGuestAllocator' is a C11 feature [-Wtypedef-redefinition] } QGuestAllocator; I converted typedef struct ... QGuestAllocator; to struct ...; --Stefan] Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Marc Marí <marc.mari.barcelo@gmail.com> Message-id: 1421698563-6977-7-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos: add alloc_init_flagsJohn Snow
Allow a generic interface to alloc_init_flags, not just through pc_alloc_init_flags. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos: add qtest_vbootJohn Snow
Add a va_list variant of the qtest_boot function. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos: create libqos.cJohn Snow
The intent of this file is to serve as a misc. utilities file to be shared amongst tests that are utilizing libqos facilities. In a later patch, migration test helpers will be added to libqos.c that will allow simplified testing of migration cases where libqos is "Just Enough OS" for migrations testing. The addition of the AHCIQState structure will also allow us to eliminate global variables inside of qtests to manage allocators and test instances in a better, more functional way. libqos.c: - Add qtest_boot - Add qtest_shutdown libqos.h: - Create QOSState structure for allocator and QTestState. ahci-test.c: - Move qtest_boot and qtest_shutdown to libqos.c/h - Create AHCIQState to interface with new qtest_boot/shutdown prototypes - Modify tests slightly to use new types. For now, the new object file is only linked to ahci-test, because it still relies on pc architecture specific code in libqos. The next two patches will reorganize the code to be more general. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: Create ahci.hJohn Snow
Extract defines and other information to ahci.h, to be shared with other tests if they so please. At the very least, reduce clutter in the test file itself. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-3-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos: Split apart pc_alloc_initJohn Snow
Move the list-specific initialization over into malloc.c, to keep all of the list implementation details within the same file. The allocation and freeing of these structures are now both back within the same layer. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-2-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16iotests: Add test for drive-mirror with NBD targetMax Reitz
When the drive-mirror block job is completed, it will call bdrv_swap() on the source and the target BDS; this should obviously not result in a segmentation fault. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423256778-3340-4-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16iotests: Add "wait" functionality to _cleanup_qemuMax Reitz
The qemu process does not always need to be killed, just waiting for it can be fine, too. This introduces a way to do so. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423256778-3340-3-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16nbd: Drop BDS backpointerMax Reitz
Before this patch, the "opaque" pointer in an NBD BDS points to a BDRVNBDState, which contains an NbdClientSession object, which in turn contains a pointer to the BDS. This pointer may become invalid due to bdrv_swap(), so drop it, and instead pass the BDS directly to the nbd-client.c functions which then retrieve the NbdClientSession object from there. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423256778-3340-2-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qom: Fix typo, 'my_class_init' -> 'derived_class_init'Zhoujian
Signed-off-by: Zhoujian <jianjay.zhou@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-02-16qdev: Avoid type assertion in qdev_build_hotpluggable_device_list()Jun Li
Currently when *obj is not a TYPE_DEVICE, QEMU will abort. This patch fixes it. When *obj is not a TYPE_DEVICE, just do not add it to hotpluggable device list. This patch also fixes the following issue: 1. boot QEMU using cli: $ /opt/qemu-git-arm/bin/qemu-system-x86_64 -monitor stdio -enable-kvm \ -device virtio-scsi-pci,id=scsi0 2. device_del scsi0 via hmp using tab key(first input device_del, then press "Tab" key). (qemu) device_del After step 2, QEMU will abort. (qemu) device_del hw/core/qdev.c:930:qdev_build_hotpluggable_device_list: Object 0x5555563a2460 is not an instance of type device Signed-off-by: Jun Li <junmuzi@gmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-02-16vnc: fix coverity warningGerd Hoffmann
vnc_display_local_addr will not be called with an invalid display id. Add assert() to silence coverity warning about a null pointer dereference. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-16ui/vnc: optimize full scanline updatesPeter Lieven
in case we send and update for a complete scanline increment the y offset to avoid running to find_next_bit for that lines twice. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-16vnc: auto assian an id when calling change vnc qmp interfaceGonglei
Only in this way, change vnc qmp interface can take effect, because qemu_opts_find(&qemu_vnc_opts, id) will return NULL in vnc_display_open(), It can't connect successfully vnc server forever. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-16vnc: introduce an wrapper for auto assign vnc idGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-16vnc: using bool type instead of int for QEMU_OPT_BOOLGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-16vnc: correct missing property about vnc_displayGonglei
Missing three property for vnc socket connection, revalue display variable with correct way. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-16vnc: fix qemu crash when not configure vnc optionGonglei
Add missing vnc options: to, ipv4, ipv6 and fix qemu crash. Reproducer: $ x86_64-softmmu/qemu-system-x86_64 qemu-system-x86_64: Invalid parameter 'to' Segmentation fault (core dumped) BTW the patch fix the below bug: https://bugs.launchpad.net/qemu/+bug/1414222 Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Don Slutz <dslutz@verizon.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-13s390x/ipl: make s390x ipl device aware of migrationFan Zhang
We have to migrate the reipl parameters, so a reboot on the migrated machine will behave just like on the origin. Otherwise, the reipl parameters configured by the guest would be lost. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-13s390x/ipl: drop reipl parameters on resetsFan Zhang
Whenever a reboot initiated by the guest is done, the reipl parameters should remain valid. The disk configured by the guest is to be used for ipl'ing. External reboot/reset request (e.g. via virsh reset guest) should completely reset the guest to the initial state, and therefore also reset the reipl parameters, resulting in an ipl behaviour of the initially configured guest. This could be an external kernel or a disk. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-13s390x/ipl: support diagnose 308 subcodes 5 and 6Fan Zhang
To support dynamically updating the IPL device from inside the KVM guest on the s390 platform, DIAG 308 instruction is intercepted in QEMU to handle the request. Subcode 5 allows to specify a new boot device, which is saved for later in the s390_ipl device. This also allows to switch from an external kernel to a boot device. Subcode 6 retrieves boot device configuration that has been previously set. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-13s390x/ipl: always load the bios for ccw machineFan Zhang
We will need bios support in order to be able to support selecting a different boot device via diagnose 308 in the ccw machine, so let's make the bios mandatory for the ccw machine. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-13linux-user: correct stat structure in MIPS N32Leon Alrae
Simple "hello world" MIPS N32 userland program crashes with segfault due to incorrectly defined stat structure in QEMU. Correct "target_stat" definition to match kernel's "stat64" as in MIPS N32 there are only plain "stat" syscalls using 64-bit structure. Reported-by: Daniel Sanders <daniel.sanders@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Tested-by: Daniel Sanders <daniel.sanders@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com>
2015-02-13target-mips: pass 0 instead of -1 as rs in microMIPS LUI instructionLeon Alrae
Using rs = -1 in gen_logic_imm() for microMIPS LUI instruction is dangerous and may bite us when implementing microMIPS R6 because in R6 AUI and LUI are distinguished by rs value. Therefore use 0 for safety. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-02-13target-mips: fix broken snapshottingLeon Alrae
Recently added CP0.BadInstr and CP0.BadInstrP registers ended up in cpu_load() under different offset than in cpu_save(). These and all registers between were incorrectly restored. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-19 08:31:13 +0000