aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-04-11pci: add API to add capability at a known offsetMichael S. Tsirkin
Unlike virtio, device emulations need to add pci capabilities at known offsets to match real hardware. Make this possible by adding an appropriate API. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-04-07eepro100: fix PCI interrupt pin configuration regressionStefan Weil
Commit 15e89f5916c9e82347cbd1fd416db3e348bab426 removed this setting, but it is still needed. Without this patch, e100 device drivers using interrupts don't work with qemu. See other nic emulations which also set the PCI interrupt pin. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-04-07eepro100: fix mapping of flash memoryStefan Weil
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-04-07eepro100: Set power management capability using pci_reserve_capabilityStefan Weil
pci_add_capability automatically updates PCI status and PCI capability pointer, so use it. Use pci_reserve_capability to make the new capability appear at the correct offset. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-04-06eepro100: Set configuration bit for standard TCBStefan Weil
For some devices, this bit is always set. For the others, it is set by default. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-04-06eepro100: Add new device variant i82801Stefan Weil
This ethernet device is used in Toshiba Tecra 8200 notebooks. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-04-06eepro100: Simplified device instantiationStefan Weil
By using a private device info structure (as suggested by Gerd Hoffmann), handling of the different device variants becomes much easier. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-04-06eepro100: Simplify status handlingStefan Weil
Includes a minor STATUS_NOT_OK -> 0 tweak. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-04-06eepro100: Don't allow writing SCBStatusStefan Weil
SCBStatus is readonly, but most drivers which were derived from the old Linux eepro100.c do a word write to this address when they want to acknowledge interrupts. So we have to mask these writes here. The patch also removes old unused code for status read / write. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-04-06tcg/ppc: Fix typomalc
Signed-off-by: malc <av1474@comtv.ru>
2010-04-06tcg/ppc: Implment bswap16/32malc
Signed-off-by: malc <av1474@comtv.ru>
2010-04-05OHCI qdev conversionPaul Brook
Convert remaining OHCI devices to QDEV interface. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-04-05Fix arm-linux-userPaul Brook
Only include hw/loader.h from target-arm/helper.c when building for system emulation. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-04-05ARMv7-M reset fixesPaul Brook
Move ARMv7-M PC/SP initialization to the CPU reset routine. Add a board reset routine to call this. Also load values directly from ROM as images have not been copied yet. Avoid clearing the NVIC pointer on cpu reset. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-04-05tcg/mips: use seb/seh instructions on MIPS32R2Aurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-05tcg/mips: fix 64-bit linux-user on big endian MIPSAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-05tcg/ppc: Implement eqv, nand and normalc
Signed-off-by: malc <av1474@comtv.ru>
2010-04-05Split TLB addend and target_phys_addr_tPaul Brook
Historically the qemu tlb "addend" field was used for both RAM and IO accesses, so needed to be able to hold both host addresses (unsigned long) and guest physical addresses (target_phys_addr_t). However since the introduction of the iotlb field it has only been used for RAM accesses. This means we can change the type of addend to unsigned long, and remove associated hacks in the big-endian TCG backends. We can also remove the host dependence from target_phys_addr_t. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-04-04UHCI spurious interrut fixPaul Brook
Only raise an interrupt if the TD has actually completed. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-04-04Revert "Compile usb-ohci only once"Paul Brook
This reverts commit f1698408f1dcb7548a21828a0b1e2b530fae3af3. PCI is always little-endian. Having a user-visible "be" property is just plain wrong.
2010-04-04tcg/ppc: Fix not_i32malc
Thanks to Alexander Graf for bug report and a good reproducible test case. Signed-off-by: malc <av1474@comtv.ru>
2010-04-03Make cpu_get_real_ticks use mfsprAlexander Graf
PowerPC CPUs have had two ways to read the time base for quite some time now. They provide it using the mfspr instruction or - if a special bit is set in that opcode - using mftb. For timekeeping we're currently using mftb. While trying to get Qemu up and running on an e500v2 system, I stumbled over the CPU not supporting mftbu. It just throws an illegal instruction trap. So let's read the SPR values instead. All PPC CPUs should support them anyways. I tested this patch on an e500v2 system where it makes qemu work and on my 970MP system with 32-bit user space where everything still works with this patch applied. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: malc <av1474@comtv.ru>
2010-04-03sparc32: add IOMMU chipset doc linksBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-03sparc32: rename iommu.c to sun4m_iommu.c to make room for other IOMMUsBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-03sparc32: improve timer implementationBlue Swirl
Timer with zero period (free-run) will never match. Timer counting starts with tick value of 0x200, not from 0, so the period must calculated from one tick less than the limit. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-02Fix build on mingw32Anthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-02hw/r2d: add a USB keyboardAurelien Jarno
The R2D board does not have a PS/2 port, and only support a keyboard on the USB bus. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-02usb-bus: fix no paramsTeLeMan
After commit 702f3e0fb52c124c07f215426eeadb70a716643f, the params is nerver NULL. It should check *params instead of params to determine whether the params is empty. Signed-off-by: TeLeMan <geleman@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-02Update PowerPC OpenBIOS image to r721Aurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01win32: Fix compiler errors from u_int64_tStefan Weil
u_int64_t raises compiler error messages: CC libhw32/virtio.o /qemu/ar7/hw/virtio.c: In function ‘virtio_queue_get_avail_size’: /qemu/ar7/hw/virtio.c:776: error: ‘u_int64_t’ undeclared (first use in this function) /qemu/ar7/hw/virtio.c:776: error: (Each undeclared identifier is reported only once /qemu/ar7/hw/virtio.c:776: error: for each function it appears in.) Replacing u_int64_t by uint64_t helps. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01tcg/TODO: remove setcondAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01Fix compilation with missing inotify_init1Stefan Weil
Commit c05c7a7306a23a4b01d1606172b142c45caffc92 breaks cross compilation for mips (and other compilations without CONFIG_INOTIFY1): make[1]: Entering directory `/qemu/bin/mips' CC i386-linux-user/syscall.o cc1: warnings being treated as errors /qemu/linux-user/syscall.c: In function ‘do_syscall’: /qemu/linux-user/syscall.c:7067: error: implicit declaration of function ‘sys_inotify_init1’ Cc: Riku Voipio <riku.voipio@nokia.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01S390: Tell user why VM creation failedAlexander Graf
The KVM kernel module on S390 refuses to create a VM when the switch_amode kernel parameter is not used. Since that is not exactly obvious, let's give the user a nice warning. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01S390: Add stub for cpu_get_phys_page_debugAlexander Graf
We don't implement any virtual memory in the S390 target so far, so let's add a stub for this now mandatory function. Fixes building of S390 target. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01tcg: initial ia64 supportAurelien Jarno
A few words about design choices: * On IA64, instructions should be grouped by bundle, and dependencies between instructions declared. A first version of this code tried to schedule instructions automatically, but was very complex and too invasive for the current common TCG code (ops not ending at instruction boundaries, code retranslation breaking already generated code, etc.) It was also not very efficient, as dependencies between TCG ops is not available. Instead the option taken by the current implementation does not try to fill the bundle by scheduling instructions, but by providing ops not available as an ia64 instruction, and by offering 22-bit constant loading for most of the instructions. With both options the bundle are filled at approximately the same level. * Up to 128 registers can be affected to a function on IA64, but TCG limits this number to 64, which is actually more than enough. The register affectation is the following: - r0: used to map a constant argument with value 0 - r1: global pointer - r2, r3: internal use - r4 to r6: not used to avoid saving them - r7: env structure - r8 to r11: free for TCG (call clobbered) - r12: stack pointer - r13: thread pointer - r14 to r31: free for TCG (call clobbered) - r32: reserved (return address) - r33: reserved (PFS) - r33 to r63: free for TCG * The IA64 architecture has only 64-bit registers and no 32-bit instructions (the only exception being cmp4). Therefore 64-bit registers and instructions are used for 32-bit ops. The adopted strategy is the same as the ABI, that is the higher 32 bits are undefined. Most ops (and, or, add, shl, etc.) can directly use the 64-bit registers, while some others have to sign-extend (sar, div, etc.) or zero-extend (shr, divu, etc.) the register first. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01tcg: align static_code_gen_buffer to CODE_GEN_ALIGNAurelien Jarno
On ia64, the default memory alignement is not enough for a code alignement. To fix that, force static_code_gen_buffer alignment to CODE_GEN_ALIGN. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01ia64 disas supportAurelien Jarno
Taken from binutils SVN, using last GPLv2 version. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01linux-user: fix page_unprotect when host page size > target page sizeAurelien Jarno
When the host page size is bigger that the target one, unprotecting a page should: - mark all the target pages corresponding to the host page as writable - invalidate all tb corresponding to the host page (and not the target page) Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01linux-user/ia64: workaround ia64 strangenessesAurelien Jarno
ia64 has some strangenesses that need to be workaround: - it has a __clone2() syscall instead of the using clone() one, with different arguments, and which is not declared in the usual headers. - ucontext.uc_sigmask is declared with type long int, while it is actually of type sigset_t. - uc_mcontext, uc_sigmask, uc_stack, uc_link are declared using #define, which clashes with the target_ucontext fields. Change their names to tuc_*, as already done for some target architectures.
2010-04-01virtio-net: vhost net supportMichael S. Tsirkin
This connects virtio-net to vhost net backend. The code is structured in a way analogous to what we have with vnet header capability in tap. We start/stop backend on driver start/stop as well as on save and vm start (for migration). Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01tap: add API to retrieve vhost net headerMichael S. Tsirkin
will be used by virtio-net for vhost net support Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01tap: add vhost/vhostfd optionsMichael S. Tsirkin
This adds vhost binary option to tap, to enable vhost net accelerator. Default is off for now, we'll be able to make default on long term when we know it's stable. vhostfd option can be used by management, to pass in the fd. Assigning vhostfd implies vhost=on. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01vhost: vhost net supportMichael S. Tsirkin
This adds vhost net device support in qemu. Will be tied to tap device and virtio by following patches. Raw backend is currently missing, will be worked on/submitted separately. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01virtio-pci: fill in notifier supportMichael S. Tsirkin
Support host/guest notifiers in virtio-pci. The last one only with kvm, that's okay because vhost relies on kvm anyway. Note on kvm usage: kvm ioeventfd API is implemented on non-kvm systems as well, this is the reason we don't need if (kvm_enabled()) around it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01virtio: move typedef to qemu-commonMichael S. Tsirkin
make it possible to use type without header include, simplifying header dependencies. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01virtio: add set_status callbackMichael S. Tsirkin
vhost net backend needs to be notified when frontend status changes. Add a callback, similar to set_features. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01virtio: notifier support + APIs for queue fieldsMichael S. Tsirkin
vhost needs physical addresses for ring and other queue fields, so add APIs for these. In particular, add binding API to set host/guest notifiers. Will be used by vhost. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01notifier: event notifier implementationMichael S. Tsirkin
event notifiers are slightly generalized eventfd descriptors. Current implementation depends on eventfd because vhost is the only user, and vhost depends on eventfd anyway, but a stub is provided for non-eventfd case. We'll be able to further generalize this when another user comes along and we see how to best do this. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01kvm: add API to set ioeventfdMichael S. Tsirkin
Comment on kvm usage: rather than require users to do if (kvm_enabled()) and/or ifdefs, this patch adds an API that, internally, is defined to stub function on non-kvm build, and checks kvm_enabled for non-kvm run. While rest of qemu code still uses if (kvm_enabled()), I think this approach is cleaner, and we should convert rest of code to it long term. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01tap: add interface to get device fdMichael S. Tsirkin
Will be used by vhost to attach/detach to backend. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-04 10:26:27 +0000