aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-15qapi: Convert migrateLuiz Capitulino
The migrate command is one of those commands where HMP and QMP completely mix up together. This made the conversion to the QAPI (which separates the command into QMP and HMP parts) a bit difficult. The first important change to be noticed is that this commit completes the removal of the Monitor object from migration code, started by the previous commit. Another important and tricky change is about supporting the non-detached mode. That is, if the user doesn't pass '-d' the migrate command will lock the monitor and will only release it when migration is finished. To support this in the new HMP command (hmp_migrate()), it is necessary to create a timer which runs every second and checks if the migration is still active. If it is, the timer callback will re-schedule itself to run one second in the future. If the migration has already finished, the monitor lock is released and the user can use it normally. All these changes should be transparent to the user. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-15Purge migration of (almost) everything to do with monitorsLuiz Capitulino
The Monitor object is passed back and forth within the migration/savevm code so that it can print errors and progress to the user. However, that approach assumes a HMP monitor, being completely invalid in QMP. This commit drops almost every single usage of the Monitor object, all monitor_printf() calls have been converted into DPRINTF() ones. There are a few remaining Monitor objects, those are going to be dropped by the next commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-15Error: Introduce error_copy()Luiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-15QError: Introduce new errors for the migration commandLuiz Capitulino
The new errors are QERR_MIGRATION_ACTIVE and QERR_MIGRATION_NOT_SUPPORTED, which are going to be used by the QAPI converted migration command. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-14target-lm32/microblaze: Drop second CPU{LM32, MB}State typedefAndreas Färber
Commit 9b9a970a23625de4ae6b7461906a9a0d98d3ca95 (target-lm32/microblaze: Typedef struct CPU{MB,LM32}State) introduced necessary typedefs for cpu_mmu_index() and mmu.h respectively. On some GCC versions this leads to "error: redefinition of typedef". Drop the original typedef to hopefully fix the build. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14Merge remote-tracking branch 'afaerber/qom-cpu.v5' into stagingAnthony Liguori
* afaerber/qom-cpu.v5: (43 commits) qom: Introduce CPU class Rename CPUState -> CPUArchState xtensa hw/: Don't use CPUState sparc hw/: Don't use CPUState sh4 hw/: Don't use CPUState s390x hw/: Don't use CPUState ppc hw/: Don't use CPUState mips hw/: Don't use CPUState microblaze hw/: Don't use CPUState m68k hw/: Don't use CPUState lm32 hw/: Don't use CPUState i386 hw/: Don't use CPUState cris hw/: Don't use CPUState arm hw/: Don't use CPUState alpha hw/: Don't use CPUState xtensa-semi: Don't use CPUState m68k-semi: Don't use CPUState arm-semi: Don't use CPUState target-xtensa: Don't overuse CPUState target-unicore32: Don't overuse CPUState ...
2012-03-14vnc: Limit r/w access to size of allocated memoryStefan Weil
This fixes memory reads and writes which exceeded the upper limit of allocated memory vd->guest.ds->data and vd->server->data. Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14vnc: don't mess up with iohandlers in the vnc threadCorentin Chary
The threaded VNC servers messed up with QEMU fd handlers without any kind of locking, and that can cause some nasty race conditions. Using qemu_mutex_lock_iothread() won't work because vnc_dpy_cpy(), which will wait for the current job queue to finish, can be called with the iothread lock held. Instead, we now store the data in a temporary buffer, and use a bottom half to notify the main thread that new data is available. vnc_[un]lock_ouput() is still needed to access VncState members like abort, csock or jobs_buffer. Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14qom: Introduce CPU classAndreas Färber
Reintroduce CPUState as QOM object: It's abstract and derived directly from TYPE_OBJECT for compatibility with the user emulators. The identifier CPUState avoids conflicts between CPU() and the struct. Introduce $(qom-twice-y) to build it separately for system and for user emulators. Prepare a virtual reset method, (re)introduce cpu_reset() as wrapper. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14Rename CPUState -> CPUArchStateAndreas Färber
Scripted conversion: for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do sed -i "s/CPUState/CPUArchState/g" $file done All occurrences of CPUArchState are expected to be replaced by QOM CPUState, once all targets are QOM'ified and common fields have been extracted. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14xtensa hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/xtensa_*.[hc]; do sed -i "s/CPUState/CPUXtensaState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14sparc hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/sun4m.c hw/sun4u.c hw/grlib.h hw/leon3.c; do sed -i "s/CPUState/CPUSPARCState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14sh4 hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/sh.h hw/shix.c hw/r2d.c; do sed -i "s/CPUState/CPUSH4State/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14s390x hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/s390-*.[hc]; do sed -i "s/CPUState/CPUS390XState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14ppc hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/ppc*.[hc] hw/mpc8544_guts.c hw/spapr*.[hc] hw/virtex_ml507.c hw/xics.c; do sed -i "s/CPUState/CPUPPCState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14mips hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/mips_*.[hc]; do sed -i "s/CPUState/CPUMIPSState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14microblaze hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/microblaze_*.[hc] hw/petalogix_ml605_mmu.c hw/petalogix_s3adsp1800_mmu.c; do sed -i "s/CPUState/CPUMBState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14m68k hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/an5206.c hw/dummy_m68k.c hw/mcf.h hw/mcf5206.c hw/mcf5208.c hw/mcf_intc.c; do sed -i "s/CPUState/CPUM68KState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14lm32 hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/lm32_boards.c hw/milkymist.c; do sed -i "s/CPUState/CPULM32State/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14i386 hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/apic.h hw/kvm/apic.c hw/kvmvapic.c hw/pc.c hw/vmport.c hw/xen_machine_pv.c; do sed -i "s/CPUState/CPUX86State/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14cris hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/cris-boot.[hc] hw/cris_pic_cpu.c hw/axis_dev88.c hw/etraxfs.h hw/etraxfs_ser.c; do sed -i "s/CPUState/CPUCRISState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14arm hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/arm-misc.h hw/arm_boot.c hw/arm_pic.c hw/armv7m.c hw/exynos4210.h hw/highbank.c hw/integratorcp.c hw/musicpal.c hw/omap.h hw/pxa.h hw/pxa2xx_gpio.c hw/pxa2xx_pic.c hw/realview.c hw/strongarm.h hw/versatilepb.c hw/vexpress.c hw/xilinx_zynq.c ; do sed -i "s/CPUState/CPUARMState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14alpha hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/alpha_*.[hc]; do sed -i "s/CPUState/CPUAlphaState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14xtensa-semi: Don't use CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUXtensaState/g" xtensa-semi.c Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14m68k-semi: Don't use CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUM68KState/g" m68k-semi.c Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14arm-semi: Don't use CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUARMState/g" arm-semi.c Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-xtensa: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUXtensaState/g" target-xtensa/*.[hc] sed -i "s/#define CPUXtensaState/#define CPUState/" target-xtensa/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-unicore32: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUUniCore32State/g" target-unicore32/*.[hc] sed -i "s/#define CPUUniCore32State/#define CPUState/" target-unicore32/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-sparc: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUSPARCState/g" target-sparc/*.[hc] sed -i "s/#define CPUSPARCState/#define CPUState/" target-sparc/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-sh4: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUSH4State/g" target-sh4/*.[hc] sed -i "s/#define CPUSH4State/#define CPUState/" target-sh4/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-s390x: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUS390XState/g" target-s390x/*.[hc] sed -i "s/#define CPUS390XState/#define CPUState/" target-s390x/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-ppc: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUPPCState/g" target-ppc/*.[hc] sed -i "s/#define CPUPPCState/#define CPUState/" target-ppc/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-mips: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUMIPSState/g" target-mips/*.[hc] sed -i "s/#define CPUMIPSState/#define CPUState/" target-mips/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-microblaze: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUMBState/g" target-microblaze/*.[hc] sed -i "s/#define CPUMBState/#define CPUState/" target-microblaze/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-m68k: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUM68KState/g" target-m68k/*.[hc] sed -i "s/#define CPUM68KState/#define CPUState/" target-m68k/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-lm32: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPULM32State/g" target-lm32/*.[hc] sed -i "s/#define CPULM32State/#define CPUState/" target-lm32/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-i386: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUX86State/g" target-i386/*.[hc] sed -i "s/#define CPUX86State/#define CPUState/" target-i386/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-cris: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUCRISState/g" target-cris/*.[hc] sed -i "s/#define CPUCRISState/#define CPUState/" target-cris/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-arm: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUARMState/g" target-arm/*.[hc] sed -i "s/#define CPUARMState/#define CPUState/" target-arm/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com> Acked-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-14target-alpha: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUAlphaState/g" target-alpha/*.[hc] sed -i "s/#define CPUAlphaState/#define CPUState/" target-alpha/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14bsd-user: Don't overuse CPUStateAndreas Färber
Use CPU*State where applicable. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-03-14darwin-user: Don't overuse CPUStateAndreas Färber
Use CPU*State where applicable. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-03-14linux-user: Don't overuse CPUStateAndreas Färber
In target-specific code use CPU*State. While at it, fix indentation on those lines. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-03-14hw/mc146818: Drop unneeded #includesAndreas Färber
pc.h and apic.h are not needed; apic.h would drag in x86 CPUState and is now included directly for TARGET_I386. isa.h is already #included from mc146818rtc.h. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-unicore32: Rename to CPUUniCore32StateAndreas Färber
This aids in refactoring CPUState by adopting the common naming scheme. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-sparc: Typedef struct CPUSPARCState earlyAndreas Färber
Will be needed for qemu_irq_ack callback. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-lm32/microblaze: Typedef struct CPU{MB,LM32}StateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14monitor: Avoid CPUState in read/write functionsAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14monitor: Don't access registers through CPUStateAndreas Färber
Use CPUX86State etc. instead (hand-converted). Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14Rename cpu_reset() to cpu_state_reset()Andreas Färber
Frees the identifier cpu_reset for QOM CPUs (manual rename). Don't hide the parameter type behind explicit casts, use static functions with strongly typed argument to indirect. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>