aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-09-23MAINTAINERS: update maintainer for target-arm and ARM devboardsPeter Maydell
Add myself as co-maintainer alongside Paul Brook for the TCG ARM guest implementation (target-arm) and the ARM dev boards (integratorcp, realview, stellaris, versatilepb). Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Acked-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23Makefile: Remove 'tarbin' targetPeter Maydell
Remove the 'tarbin' target -- it isn't used as part of the official QEMU release process, and it's out of date (various new bios files were never added to its list of files). It's better not to provide it at all than to have a broken makefile target we never use or test. (Creating a tarball by just pulling in binaries that have been installed directly to the system you're running the build on is a bad idea anyway: the better way to create a binary tarball would be just to install to a temporary DESTDIR and then tar up that.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23qemu-char: use qemu_set_fd_handler/2 consistentlyMarcelo Tosatti
Now that qemu_set_fd_handler and qemu_set_fd_handler2 have different implementations, one using qemu iohandlers and the other glib, it is not safe to mix the two when inserting/deleting handlers. Fixes kvm-autotest. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23adlib: remove write-only variableHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23irq: introduce qemu_irq_proxy()Avi Kivity
In some cases we have a circular dependency involving irqs - the irq controller depends on a bus, which in turn depends on the irq controller. Add qemu_irq_proxy() which acts as a passthrough, except that the target irq may be set later on. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23Barriers in qemu-barrier.h should not be x86 specificDavid Gibson
qemu-barrier.h contains a few macros implementing memory barrier primitives used in several places throughout qemu. However, apart from the compiler-only barrier, the defined wmb() is correct only for x86, or platforms which are similarly strongly ordered. This patch addresses the FIXME about this by making the wmb() macro arch dependent. On x86, it remains a compiler barrier only, but with a comment explaining in more detail the conditions under which this is correct. On weakly-ordered powerpc, an "eieio" instruction is used, again with explanation of the conditions under which it is sufficient. On other platforms, we use the __sync_synchronize() primitive, available in sufficiently recent gcc (4.2 and after?). This should implement a full barrier which will be sufficient on all platforms, although it may be overkill in some cases. Other platforms can add optimized versions in future if it's worth it for them. Without proper memory barriers, it is easy to reproduce ordering problems with virtio on powerpc; specifically, the QEMU puts new element into the "used" ring and then updates the ring free-running counter. Without a barrier between these under the right circumstances, the guest linux driver can receive an interrupt, read the counter change but find the ring element to be handled still has an old value, leading to an "id %u is not a head!\n" error message. Similar problems are likely to be possible with kvm on other weakly ordered platforms. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23virtio: Use global memory barrier macrosDavid Gibson
The virtio code uses wmb() macros in several places, as required by the SMP-aware virtio protocol. However the wmb() macro is locally defined to be a compiler barrier only. This is probably sufficient on x86 due to its strong storage ordering model, but it certainly isn't on other platforms, such as ppc. In any case, qemu already has some globally defined memory barrier macros in qemu-barrier.h. This patch, therefore converts virtio.c to use those barrier macros. The macros in qemu-barrier.h are also wrong (or at least, safe for x86 only) but this way at least there's only one place to fix them. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23Fix and clean code which tests the gcc versionStefan Weil
The code which tests whether gcc supports warn_unused_result was wrong. Remove the wrong test from configure and replace it by code using macro QEMU_GNUC_PREREQ in compiler.h. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23Move macro QEMU_GNUC_PREREQ to compiler.hStefan Weil
The macro is compiler specific and does not depend on the operating system. Move macro QEMU_GNUC_PREREQ from osdep.h to compiler.h and use it to simplify existing code. host-utils.h uses this macro, so it now needs compiler.h instead of osdep.h. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23pci-devfn: check that device/slot number is within rangeDonald Dutile
Need to check that guest slot/device number is not > 31 or walk off the devfn table when checking if a devfn is available or not in a guest. before this fix, passing in an addr=abc or addr=34, can crash qemu, sometimes fail gracefully if data past end of devfn table fails the availability test. with this fix, get clean error: Property 'pci-assign.addr' doesn't take value '34' also tested when no addr= param passed for guest (pcicfg) address, and that worked as well. Signed-off-by: Don Dutile <ddutile@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23isapc: give system address space when pci is disabledHervé Poussineau
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23build: fix race with creating qapi-generatedMichael Roth
Since qapi-generated/ is a global QEMU include path, we need to make sure it is created before anything is compiled, so do this in the configure phase rather than via the Makefile. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23cirrus: Unbreak ISA supportJan Kiszka
Do not try to map against the PCI bar in the ISA version of the device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23vga: Unbreak ISA supportJan Kiszka
We need to initialize legacy_address_space during ISA VGA setup so that the chain-4 alias can be registered properly. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23pc: Disable HPET for ISA machineJan Kiszka
There was no HPET on ISA boxes. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23pc: Unbreak ROM mapping for ISA machineJan Kiszka
This is based on the original fix by Hervé Poussineau: pc_memory_init actually takes a memory region for mapping BIOS and extension ROMs. That equals the PCI memory region if PCI is available, but must be system memory in the ISA case. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23e1000: Don't set the Capabilities List bitdann frazier
[Originally sent to qemu-kvm list, but I was redirected here] The Capabilities Pointer is NULL, so this bit shouldn't be set. The state of this bit doesn't appear to change any behavior on Linux/Windows versions we've tested, but it does cause Windows' PCI/PCI Express Compliance Test to balk. I happen to have a physical 82540EM controller, and it also sets the Capabilities Bit, but it actually has items on the capabilities list to go with it :) Signed-off-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23core: remove qemu_service_ioFrediano Ziglio
qemu_service_io was mainly an alias to qemu_notify_event, currently used only by PPC for timer hack, so call qemu_notify_event directly. Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23hw/omap_gpmc: Modify correct field when writing IRQSTATUS registerPeter Maydell
Writing to IRQSTATUS should affect irqst, not irqen -- error spotted by Andrzej Zaborowski. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-09-23hw/omap_gpmc: Add comment about FIFOTHRESHOLDSTATUS bitPeter Maydell
Promote the remark about why we handle FIFOTHRESHOLDSTATUS the way we do from the commit message of de8af7fe0 to a comment in the code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-09-22Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
2011-09-22Merge remote-tracking branch 'qemu-kvm-tmp/memory/core' into stagingAnthony Liguori
2011-09-22Merge remote-tracking branch 'stefanha/tracing' into stagingAnthony Liguori
2011-09-22Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
2011-09-22Merge remote-tracking branch 'qemu-kvm-tmp/memory/batch' into stagingAnthony Liguori
2011-09-21block/curl: Don't finish AIOCBs too earlyNick Thomas
The previous behaviour was to finish AIOCBs inside curl_aio_readv() if the data was cached. This caused the following failed assertion at hw/ide/pci.c:314: bmdma_cmd_writeb "Assertion `bm->bus->dma->aiocb == ((void *)0)' failed." By scheduling a QEMUBH and performing the completion inside the callback, we avoid this problem. Signed-off-by: Nick Thomas <nick@bytemark.co.uk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-21block/curl: Implement a flush function on the fd handlersNick Thomas
Signed-off-by: Nick Thomas <nick@bytemark.co.uk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-21ahci: add port I/O index-data pairDaniel Verkamp
Implement an I/O space index-data register pair as defined by the AHCI spec, including the corresponding SATA PCI capability and BAR. This allows real-mode code to access the AHCI registers; real-mode code cannot address the memory-mapped register space because it is beyond the first megabyte. Signed-off-by: Daniel Verkamp <daniel@drv.nu> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-21trace: Update docs to use example events that existLluís Vilanova
The events 'qemu_malloc' and 'qemu_free' used in the examples no longer exist, so use 'qemu_vmalloc' and 'qemu_vfree' instead. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21trace: use binary file open mode in simpletraceStefan Hajnoczi
For Windows portability the simple trace backend must use the 'b' file open mode. This prevents the stdio library from mangling 0x0a/0x0d newline characters. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21trace: portable simple trace backend using glibStefan Hajnoczi
Convert the simple trace backend to glib so that it works under Windows. We cannot use pthread directly but glib provides portable abstractions. Also use glib atomics instead of newish gcc builtins which may not be supported on Windows toolchains. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21MAINTAINERS: add tracing subsystemStefan Hajnoczi
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21trace: allow trace events with string argumentsStefan Hajnoczi
String arguments are useful for producing human-readable traces without post-processing (e.g. stderr backend). Although the simple backend cannot handles strings all others can. Strings should be allowed and the simple backend can be extended to support them. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21use qemu_* ctype functionsChristoph Egger
Fix "warning: array subscript has type 'char'" on NetBSD. Signed-off-by: Christoph Egger <Christoph.Egger@amd.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21Remove qemu_host_page_bitsStefan Weil
It was introduced with commit 54936004fddc52c321cb3f9a9a51140e782bed5d as host_page_bits but never used. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21Abort on thread layer errorsJan Kiszka
Makes it easier to catch the bug in gdb as there is no need to set an explicit breakpoint. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21Silence make if nothing is to do for libcacardJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21Drop unneeded pthread.h inclusionsJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21fix compilation with stderr trace backendPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21configure: Make missing pkg-config an error rather than a warningPeter Maydell
If pkg-config doesn't exist then make configure fail immediately with a useful error message. Now that glib is a required dependency, proceeding despite the missing pkg-config will just cause us to fail later with a misleading message about glib not being present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21target-i386: Remove data type CCTableStefan Weil
Remove also two assert statements which were the last remaining users. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21nbd: fix non-Linux build failurePaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-21omap1: convert to memory API (part VI)Avi Kivity
Easy RAM stuff. Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-21soc_dma: drop soc_dma_port_add_mem_ram()Avi Kivity
It's a trivial wrapper for soc_dma_port_add_mem(), which makes the memory API conversion more difficult because it takes a ram addr_t. Drop. Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-21omap_lcdc: remove imif, emiff from structureAvi Kivity
Not used. Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-21omap1: convert to memory API (part V)Avi Kivity
Tricky aliases. Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-21omap1: convert to memory API (part IV)Avi Kivity
Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-21omap1: convert to memory API (part III)Avi Kivity
Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-21omap1: convert to memory API (part II)Avi Kivity
Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-21omap1: convert to memory API (part I)Avi Kivity
Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-13 05:32:43 +0000