aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-18pc-bios/s390-ccw: Rebuild the s390-netboot.img firmware imageThomas Huth
The new image now contains the "pc-bios/s390-ccw/net: fix a possible memory leak in get_uuid()" patch. Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-09-18pc-bios/s390-ccw/net: fix a possible memory leak in get_uuid()Yifan Luo
There is a possible memory leak in get_uuid(). Should free allocated mem before return NULL. Signed-off-by: Yifan Luo <luoyifan@cmss.chinamobile.com> Message-Id: <02cf01d55267$86cf2850$946d78f0$@cmss.chinamobile.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-09-18pc-bios/s390-ccw: Do not pre-initialize empty arrayThomas Huth
Since commit 339686a358b11a231aa5b6d1424e7a1460d7f277 ("pc-bios/s390-ccw: zero out bss section"), we are clearing now the BSS in start.S, so there is no need to pre-initialize the loadparm_str array with zeroes anymore. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-09-17target/sparc: Switch to do_transaction_failed() hookPeter Maydell
Switch the SPARC target from the old unassigned_access hook to the new do_transaction_failed hook. This will cause the "if transaction failed" code paths added in the previous commits to become active if the access is to an unassigned address. In particular we'll now handle bus errors during page table walks correctly (generating a translation error with the right kind of fault status). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20190801183012.17564-8-peter.maydell@linaro.org
2019-09-17target/sparc: Remove unused ldl_phys from dump_mmu()Peter Maydell
The dump_mmu() function does a ldl_phys() at the start, but then never uses the value it loads at all. Remove the unused code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20190801183012.17564-7-peter.maydell@linaro.org
2019-09-17target/sparc: Handle bus errors in mmu_probe()Peter Maydell
Convert the mmu_probe() function to using address_space_ldl() rather than ldl_phys(), so we can explicitly detect memory transaction failures. This makes no practical difference at the moment, because ldl_phys() will return 0 on a transaction failure, and we treat transaction failures and 0 PDEs identically. However the spec says that MMU probe operations are supposed to update the fault status registers, and if we ever implement that we'll want to distinguish the difference. For the moment, just add a TODO comment about the bug. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20190801183012.17564-6-peter.maydell@linaro.org
2019-09-17target/sparc: Correctly handle bus errors in page table walksPeter Maydell
Currently we use the ldl_phys() function to read page table entries. With the unassigned_access hook in place, if these hit an unassigned area of memory then the hook will cause us to wrongly generate an exception with a fault address matching the address of the page table entry. Change to using address_space_ldl() so we can detect and correctly handle bus errors and give them their correct behaviour of causing a translation error with a suitable fault status register. Note that this won't actually take effect until we switch the over to using the do_translation_failed hook. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20190801183012.17564-5-peter.maydell@linaro.org
2019-09-17target/sparc: Check for transaction failures in MXCC stream ASI accessesPeter Maydell
Currently the ld/st_asi helper functions make calls to the ld*_phys() and st*_phys() functions for those ASIs which imply direct accesses to physical addresses. These implicitly rely on the unassigned_access hook to cause them to generate an MMU fault if the access fails. Switch to using the address_space_* functions instead, which return a MemTxResult that we can check. This means that when we switch SPARC over to using the do_transaction_failed hook we'll still get the same MMU faults we did before. This commit converts the ASIs which do MXCC stream source and destination accesses. It's not clear to me whether raising an MMU fault like this is the correct behaviour if we encounter a bus error, but we retain the same behaviour that the old unassigned_access hook would implement. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20190801183012.17564-4-peter.maydell@linaro.org
2019-09-17target/sparc: Check for transaction failures in MMU passthrough ASIsPeter Maydell
Currently the ld/st_asi helper functions make calls to the ld*_phys() and st*_phys() functions for those ASIs which imply direct accesses to physical addresses. These implicitly rely on the unassigned_access hook to cause them to generate an MMU fault if the access fails. Switch to using the address_space_* functions instead, which return a MemTxResult that we can check. This means that when we switch SPARC over to using the do_transaction_failed hook we'll still get the same MMU faults we did before. This commit converts the ASIs which do "MMU passthrough". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20190801183012.17564-3-peter.maydell@linaro.org
2019-09-17target/sparc: Factor out the body of sparc_cpu_unassigned_access()Peter Maydell
Currently the SPARC target uses the old-style do_unassigned_access hook. We want to switch it over to do_transaction_failed, but to do this we must first remove all the direct calls in ldst_helper.c to cpu_unassigned_access(). Factor out the body of the hook function's code into a new sparc_raise_mmu_fault() and call it from the hook and from the various places that used to call cpu_unassigned_access(). In passing, this fixes a bug where the code that raised the MMU exception was directly calling GETPC() from a function that was several levels deep in the callstack from the original helper function: the new sparc_raise_mmu_fault() instead takes the return address as an argument. Other than the use of retaddr rather than GETPC() and a comment format fixup, the body of the new function has no changes from that of the old hook function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20190801183012.17564-2-peter.maydell@linaro.org
2019-09-17Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Fix Patchew CI failures (myself) * i386 fw_cfg refactoring (Philippe) * pmem bugfix (Stefan) * Support for accessing cstate MSRs (Wanpeng) * exec.c cleanups (Wei Yang) * Improved throttling (Yury) * elf-ops.h coverity fix (Stefano) # gpg: Signature made Mon 16 Sep 2019 16:13:12 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (29 commits) hw/i386/pc: Extract the x86 generic fw_cfg code hw/i386/pc: Rename pc_build_feature_control() as generic fw_cfg_build_* hw/i386/pc: Let pc_build_feature_control() take a MachineState argument hw/i386/pc: Let pc_build_feature_control() take a FWCfgState argument hw/i386/pc: Rename pc_build_smbios() as generic fw_cfg_build_smbios() hw/i386/pc: Let pc_build_smbios() take a generic MachineState argument hw/i386/pc: Let pc_build_smbios() take a FWCfgState argument hw/i386/pc: Replace PCMachineState argument with MachineState in fw_cfg_arch_create hw/i386/pc: Pass the CPUArchIdList array by argument hw/i386/pc: Pass the apic_id_limit value by argument hw/i386/pc: Pass the boot_cpus value by argument hw/i386/pc: Rename bochs_bios_init as more generic fw_cfg_arch_create hw/i386/pc: Use address_space_memory in place hw/i386/pc: Extract e820 memory layout code hw/i386/pc: Use e820_get_num_entries() to access e820_entries cpus: Fix throttling during vm_stop qemu-thread: Add qemu_cond_timedwait memory: inline and optimize devend_memop memory: fetch pmem size in get_file_size() elf-ops.h: fix int overflow in load_elf() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-16hw/i386/pc: Extract the x86 generic fw_cfg codePhilippe Mathieu-Daudé
Extract all the functions that are not PC-machine specific into the (arch-specific) fw_cfg.c file. This will allow other X86-machine to reuse these functions. Suggested-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190818225414.22590-16-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16hw/i386/pc: Rename pc_build_feature_control() as generic fw_cfg_build_*Philippe Mathieu-Daudé
Now that the pc_build_feature_control_file() function has been refactored to not depend of PC specific types, rename it to a more generic name. Suggested-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190818225414.22590-15-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16hw/i386/pc: Let pc_build_feature_control() take a MachineState argumentPhilippe Mathieu-Daudé
Let the pc_build_feature_control_file() function take a generic MachineState argument. Suggested-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190818225414.22590-14-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16hw/i386/pc: Let pc_build_feature_control() take a FWCfgState argumentPhilippe Mathieu-Daudé
Pass the FWCfgState object by argument, this will allow us to remove the PCMachineState argument later. Suggested-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190818225414.22590-13-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16hw/i386/pc: Rename pc_build_smbios() as generic fw_cfg_build_smbios()Philippe Mathieu-Daudé
Now that the pc_build_smbios() function has been refactored to not depend of PC specific types, rename it to a more generic name. Suggested-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190818225414.22590-12-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16hw/i386/pc: Let pc_build_smbios() take a generic MachineState argumentPhilippe Mathieu-Daudé
Let the pc_build_smbios() function take a generic MachineState argument. Suggested-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190818225414.22590-11-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16hw/i386/pc: Let pc_build_smbios() take a FWCfgState argumentPhilippe Mathieu-Daudé
Pass the FWCfgState object by argument, this will allow us to remove the PCMachineState argument later. Suggested-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190818225414.22590-10-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16hw/i386/pc: Replace PCMachineState argument with MachineState in ↵Paolo Bonzini
fw_cfg_arch_create In the previous commit we removed the last access to PCMachineState. Replace it with a generic MachineState argument and use it to retrieve the CPUArchIdList. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16hw/i386/pc: Pass the CPUArchIdList array by argumentPhilippe Mathieu-Daudé
Pass the CPUArchIdList array by argument, this will allow us to remove the PCMachineState argument later. Suggested-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190818225414.22590-8-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16hw/i386/pc: Pass the apic_id_limit value by argumentPhilippe Mathieu-Daudé
Pass the apic_id_limit value by argument, this will allow us to remove the PCMachineState argument later. Suggested-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190818225414.22590-7-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16hw/i386/pc: Pass the boot_cpus value by argumentPhilippe Mathieu-Daudé
The boot_cpus is used once. Pass it by argument, this will allow us to remove the PCMachineState argument later. Suggested-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190818225414.22590-6-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16hw/i386/pc: Rename bochs_bios_init as more generic fw_cfg_arch_createPhilippe Mathieu-Daudé
The bochs_bios_init() function is not restricted to the Bochs BIOS and is useful to other BIOS. Since it is not specific to the PC machine, and can be reused by other machines of the X86 architecture, rename it as fw_cfg_arch_create(). Suggested-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190818225414.22590-5-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16hw/i386/pc: Use address_space_memory in placePhilippe Mathieu-Daudé
The address_space_memory variable is used once. Use it in place and remove the argument. Suggested-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190818225414.22590-4-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16hw/i386/pc: Extract e820 memory layout codePhilippe Mathieu-Daudé
Suggested-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190818225414.22590-3-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16hw/i386/pc: Use e820_get_num_entries() to access e820_entriesPhilippe Mathieu-Daudé
To be able to extract the e820* code out of this file (in the next patch), access e820_entries with its correct helper. Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190818225414.22590-2-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16cpus: Fix throttling during vm_stopYury Kotov
Throttling thread sleeps in VCPU thread. For high throttle percentage this sleep is more than 10ms. E.g. for 60% - 15ms, for 99% - 990ms. vm_stop() kicks all VCPUs and waits for them. It's called at the end of migration and because of the long sleep the migration downtime might be more than 100ms even for downtime-limit 1ms. Use qemu_cond_timedwait for high percentage to wake up during vm_stop. Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20190909131335.16848-3-yury-kotov@yandex-team.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16qemu-thread: Add qemu_cond_timedwaitYury Kotov
The new function is needed to implement conditional sleep for CPU throttling. It's possible to reuse qemu_sem_timedwait, but it's more difficult than just add qemu_cond_timedwait. Also moved compute_abs_deadline function up the code to reuse it in qemu_cond_timedwait_impl win32. Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Message-Id: <20190909131335.16848-2-yury-kotov@yandex-team.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-09-16' ↵Peter Maydell
into staging Block patches: - Fix for block jobs when used with I/O threads - Fix for a corruption when using qcow2's LUKS encryption mode - cURL fix - check-block.sh cleanups (for make check) - Refactoring # gpg: Signature made Mon 16 Sep 2019 14:41:15 BST # gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40 # gpg: issuer "mreitz@redhat.com" # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full] # Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40 * remotes/maxreitz/tags/pull-block-2019-09-16: qemu-iotests: Add test for bz #1745922 block/qcow2: refactor encryption code block/qcow2: Fix corruption introduced by commit 8ac0f15f335 blockjob: update nodes head while removing all bdrv curl: Check curl_multi_add_handle()'s return code curl: Handle success in multi_check_completion curl: Report only ready sockets curl: Pass CURLSocket to curl_multi_do() curl: Check completion in curl_multi_do() curl: Keep *socket until the end of curl_sock_cb() curl: Keep pointer to the CURLState in CURLSocket tests/qemu-iotests: Fix qemu-io related output in 026.out.nocache tests/Makefile: Do not print the name of the check-block.sh shell script tests/qemu-iotests/check: Replace "tests" with "iotests" in final status text block: Remove unused masks block: Use QEMU_IS_ALIGNED Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-16qemu-iotests: Add test for bz #1745922Maxim Levitsky
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190915203655.21638-4-mlevitsk@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16block/qcow2: refactor encryption codeMaxim Levitsky
* Change the qcow2_co_{encrypt|decrypt} to just receive full host and guest offsets and use this function directly instead of calling do_perform_cow_encrypt (which is removed by that patch). * Adjust qcow2_co_encdec to take full host and guest offsets as well. * Document the qcow2_co_{encrypt|decrypt} arguments to prevent the bug fixed in former commit from hopefully happening again. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-id: 20190915203655.21638-3-mlevitsk@redhat.com Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [mreitz: Let perform_cow() return the error value returned by qcow2_co_encrypt(), as proposed by Vladimir] Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16block/qcow2: Fix corruption introduced by commit 8ac0f15f335Maxim Levitsky
This fixes subtle corruption introduced by luks threaded encryption in commit 8ac0f15f335 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1745922 The corruption happens when we do a write that * writes to two or more unallocated clusters at once * doesn't fully cover the first sector * doesn't fully cover the last sector * uses luks encryption In this case, when allocating the new clusters we COW both areas prior to the write and after the write, and we encrypt them. The above mentioned commit accidentally made it so we encrypt the second COW area using the physical cluster offset of the first area. The problem is that offset_in_cluster in do_perform_cow_encrypt can be larger that the cluster size, thus cluster_offset will no longer point to the start of the cluster at which encrypted area starts. Next patch in this series will refactor the code to avoid all these assumptions. In the bugreport that was triggered by rebasing a luks image to new, zero filled base, which lot of such writes, and causes some files with zero areas to contain garbage there instead. But as described above it can happen elsewhere as well Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190915203655.21638-2-mlevitsk@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16blockjob: update nodes head while removing all bdrvSergio Lopez
block_job_remove_all_bdrv() iterates through job->nodes, calling bdrv_root_unref_child() for each entry. The call to the latter may reach child_job_[can_]set_aio_ctx(), which will also attempt to traverse job->nodes, potentially finding entries that where freed on previous iterations. To avoid this situation, update job->nodes head on each iteration to ensure that already freed entries are no longer linked to the list. RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1746631 Signed-off-by: Sergio Lopez <slp@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190911100316.32282-1-mreitz@redhat.com Reviewed-by: Sergio Lopez <slp@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16curl: Check curl_multi_add_handle()'s return codeMax Reitz
If we had done that all along, debugging would have been much simpler. (Also, I/O errors are better than hangs.) Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190910124136.10565-8-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16curl: Handle success in multi_check_completionMax Reitz
Background: As of cURL 7.59.0, it verifies that several functions are not called from within a callback. Among these functions is curl_multi_add_handle(). curl_read_cb() is a callback from cURL and not a coroutine. Waking up acb->co will lead to entering it then and there, which means the current request will settle and the caller (if it runs in the same coroutine) may then issue the next request. In such a case, we will enter curl_setup_preadv() effectively from within curl_read_cb(). Calling curl_multi_add_handle() will then fail and the new request will not be processed. Fix this by not letting curl_read_cb() wake up acb->co. Instead, leave the whole business of settling the AIOCB objects to curl_multi_check_completion() (which is called from our timer callback and our FD handler, so not from any cURL callbacks). Reported-by: Natalie Gavrielov <ngavrilo@redhat.com> Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1740193 Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190910124136.10565-7-mreitz@redhat.com Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16curl: Report only ready socketsMax Reitz
Instead of reporting all sockets to cURL, only report the one that has caused curl_multi_do_locked() to be called. This lets us get rid of the QLIST_FOREACH_SAFE() list, which was actually wrong: SAFE foreaches are only safe when the current element is removed in each iteration. If it possible for the list to be concurrently modified, we cannot guarantee that only the current element will be removed. Therefore, we must not use QLIST_FOREACH_SAFE() here. Fixes: ff5ca1664af85b24a4180d595ea6873fd3deac57 Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190910124136.10565-6-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16curl: Pass CURLSocket to curl_multi_do()Max Reitz
curl_multi_do_locked() currently marks all sockets as ready. That is not only inefficient, but in fact unsafe (the loop is). A follow-up patch will change that, but to do so, curl_multi_do_locked() needs to know exactly which socket is ready; and that is accomplished by this patch here. Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190910124136.10565-5-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16curl: Check completion in curl_multi_do()Max Reitz
While it is more likely that transfers complete after some file descriptor has data ready to read, we probably should not rely on it. Better be safe than sorry and call curl_multi_check_completion() in curl_multi_do(), too, just like it is done in curl_multi_read(). With this change, curl_multi_do() and curl_multi_read() are actually the same, so drop curl_multi_read() and use curl_multi_do() as the sole FD handler. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190910124136.10565-4-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16curl: Keep *socket until the end of curl_sock_cb()Max Reitz
This does not really change anything, but it makes the code a bit easier to follow once we use @socket as the opaque pointer for aio_set_fd_handler(). Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190910124136.10565-3-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16curl: Keep pointer to the CURLState in CURLSocketMax Reitz
A follow-up patch will make curl_multi_do() and curl_multi_read() take a CURLSocket instead of the CURLState. They still need the latter, though, so add a pointer to it to the former. Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20190910124136.10565-2-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16tests/qemu-iotests: Fix qemu-io related output in 026.out.nocacheVladimir Sementsov-Ogievskiy
qemu-io now prefixes its error and warnings with "qemu-io:". 36b9986b08787019e fixed a lot of iotests output but forget about 026.out.nocache. Fix it too. Fixes: 99e98d7c9fc1a1639fad ("qemu-io: Use error_[gs]et_progname()") Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190816153015.447957-2-vsementsov@virtuozzo.com Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16tests/Makefile: Do not print the name of the check-block.sh shell scriptThomas Huth
The check script is already printing out which iotest is currently running, so printing out the name of the check-block.sh shell script looks superfluous here. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 20190906113534.10907-1-thuth@redhat.com Acked-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16tests/qemu-iotests/check: Replace "tests" with "iotests" in final status textThomas Huth
When running "make check -j8" or something similar, the iotests are running in parallel with the other tests. So when they are printing out "Passed all xx tests" or a similar status message at the end, it might not be quite clear that this message belongs to the iotests, since the output might be mixed with the other tests. Thus change the word "tests" here to "iotests" instead to avoid confusion. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 20190906113920.11271-1-thuth@redhat.com Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16block: Remove unused masksNir Soffer
Replace confusing usage: ~BDRV_SECTOR_MASK With more clear: (BDRV_SECTOR_SIZE - 1) Remove BDRV_SECTOR_MASK and the unused BDRV_BLOCK_OFFSET_MASK which was it's last user. Signed-off-by: Nir Soffer <nsoffer@redhat.com> Message-id: 20190827185913.27427-3-nsoffer@redhat.com Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16block: Use QEMU_IS_ALIGNEDNir Soffer
Replace instances of: (n & (BDRV_SECTOR_SIZE - 1)) == 0 And: (n & ~BDRV_SECTOR_MASK) == 0 With: QEMU_IS_ALIGNED(n, BDRV_SECTOR_SIZE) Which reveals the intent of the code better, and makes it easier to locate the code checking alignment. Signed-off-by: Nir Soffer <nsoffer@redhat.com> Message-id: 20190827185913.27427-2-nsoffer@redhat.com Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16Merge remote-tracking branch 'remotes/rth/tags/pull-hppa-20190915' into stagingPeter Maydell
Two temp live across branch fixes. # gpg: Signature made Sun 15 Sep 2019 14:48:06 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-hppa-20190915: target/hppa: prevent trashing of temporary in do_depw_sar() target/hppa: prevent trashing of temporary in trans_mtctl() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-16memory: inline and optimize devend_memopPaolo Bonzini
devend_memop can rely on the fact that the result is always either 0 or MO_BSWAP, corresponding respectively to host endianness and the opposite. Native (target) endianness in turn can be either the host endianness, in which case MO_BSWAP is only returned for host-opposite endianness, or the opposite, in which case 0 is only returned for host endianness. With this in mind, devend_memop can be compiled as a setcond+shift for every target. Do this and, while at it, move it to include/exec/memory.h since !NEED_CPU_H files do not (and should not) need it. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16memory: fetch pmem size in get_file_size()Stefan Hajnoczi
Neither stat(2) nor lseek(2) report the size of Linux devdax pmem character device nodes. Commit 314aec4a6e06844937f1677f6cba21981005f389 ("hostmem-file: reject invalid pmem file sizes") added code to hostmem-file.c to fetch the size from sysfs and compare against the user-provided size=NUM parameter: if (backend->size > size) { error_setg(errp, "size property %" PRIu64 " is larger than " "pmem file \"%s\" size %" PRIu64, backend->size, fb->mem_path, size); return; } It turns out that exec.c:qemu_ram_alloc_from_fd() already has an equivalent size check but it skips devdax pmem character devices because lseek(2) returns 0: if (file_size > 0 && file_size < size) { error_setg(errp, "backing store %s size 0x%" PRIx64 " does not match 'size' option 0x" RAM_ADDR_FMT, mem_path, file_size, size); return NULL; } This patch moves the devdax pmem file size code into get_file_size() so that we check the memory size in a single place: qemu_ram_alloc_from_fd(). This simplifies the code and makes it more general. This also fixes the problem that hostmem-file only checks the devdax pmem file size when the pmem=on parameter is given. An unchecked size=NUM parameter can lead to SIGBUS in QEMU so we must always fetch the file size for Linux devdax pmem character device nodes. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190830093056.12572-1-stefanha@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16elf-ops.h: fix int overflow in load_elf()Stefano Garzarella
This patch fixes a possible integer overflow when we calculate the total size of ELF segments loaded. Reported-by: Coverity (CID 1405299) Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20190910124828.39794-1-sgarzare@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16hw/i386: Move CONFIG_ACPI_PCI to CONFIG_PCCole Robinson
CONFIG_ACPI_PCI is a hard requirement of acpi-build.c, which is built unconditionally for x86 target. Putting it in default-configs/ suggests that it can be easily disabled, which isn't true. Relocate the symbol with the other acpi-build.c requirements, under 'config PC'. This is similar to what is done for the arm 'virt' machine type and CONFIG_ACPI_PCI Signed-off-by: Cole Robinson <crobinso@redhat.com> Message-Id: <e73e6edff68fd30d69c6a1d02c9ef9192f773c63.1568049871.git.crobinso@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-16 08:13:12 +0000