aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-11-04PPC: E500: Instantiate MPC8XXX gpio controller on virt machineAlexander Graf
With the e500 virt machine, we don't have to adhere to the exact hardware layout of an mpc8544ds board. So there we can just add a qoriq compatible GPIO controller into the system that we can add a power off hook to. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04PPC: Add MPC8XXX gpio controllerAlexander Graf
On e500 systems most SoCs implement a common GPIO controller that Linux calls the "mpc8xxx" gpio controller. This patch adds an emulation model for this device. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04target-ppc: Fix an invalid free in opcode table handling code.Bharata B Rao
Opcode table has direct, indirect and double indirect handlers, but ppc_cpu_unrealizefn() frees direct handlers which are never allocated and never frees double indirect handlers. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04target-ppc: Use macros in opcodes table handling codeBharata B Rao
Define and use macros instead of direct numbers wherever possible in ppc opcodes table handling code. This doesn't change any code functionality. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04hw/pci/ppc4xx_pci.c: Remove unused pci4xx_cfgaddr_read/write/opsPeter Maydell
The MemoryRegionOps struct pci4xx_cfgaddr_ops and the read and write functions it references are all unused; remove them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04target-ppc : Add new processor type 440x5wDFPUPierre Mallard
This patch add a new processor type 440x5wDFPU for Virtex 5 PPC440 with an external APU FPU in double precision mode Signed-off-by: Pierre Mallard <mallard.pierre@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04target-ppc : Allow fc[tf]id[*] mnemonics for non TARGET_PPC64Pierre Mallard
This patch remove limitation for fc[tf]id[*] on 32 bits targets and add a new insn flag for signed integer 64 conversion PPC2_FP_CVT_S64 Signed-off-by: Pierre Mallard <mallard.pierre@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04PPC: openpic_kvm: Only map first occurence in address spaceAlexander Graf
The in-kernel OpenPIC emulation only supports a single map. However, we map the OpenPIC at 2 locations: The CPU visible one and the PCI visible one. For KVM acceleration, we only care about the first one. To make sure that we only map that first mapping and not the PCI map that happens dynamically later during bootup, ignore maps that happen when we are already considering ourselves mapped. Credits due are to Bogdan and Mihai for debugging this. Reported-by: Bogdan Purcareata <bogdan.purcareata@freescale.com> Reported-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04spapr: Cleanup machine naming conventions, and prepare for 2.2 releaseDavid Gibson
As of qemu-2.1, spapr/pseries, has a set of versioned machine classes to represent the machine type as it appeared to the guest in different qemu versions. This allows for safe migration of guests between current and future qemu versions. However, these are organized a bit differently from those for PC: on PC, the default plain "pc" machine type is just an alias for the most recent versioned machine type. In sPAPR, it names the base machine class from which the versioned types are derived. The PC approach is preferable; it makes it clearer which explicit version is the current one. Additionally updating the "current" machine as the base class makes it even more likely than otherwise to incorrectly alter the versioned machines' behaviour when updating the current machine. Therefore this patch changes sPAPR to the PC approach - the base class becomes abstract, and plain "pseries" becomes an alias for the most recent versioned machine class. Since qemu-2.1 is now released, we also create a new pseries-2.2 machine type, to incorporate changes during this development cycle (for now it is identical to pseries-2.1). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04target-ppc: virtex-ml507 machine type should depend on CONFIG_XILINXDavid Gibson
The virtex-ml507 is a Xilinx CPU based system, and requires several sub devices which are only included with CONFIG_XILINX. Therefore, it should only be compiled if CONFIG_XILINX is set. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04target-ppc: Implement IVOR[59] By Default for Book ETom Musta
Adjust the IVOR mask for generic Book E implementation to support bit 59. This is consistent with the Power ISA. Signed-off-by: Tom Musta <tommusta@gmail.com> Reported-by: Pierre Mallard <mallard.pierre@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04target-ppc: Fix kvmppc_set_compat to use negotiated cpu-versionAlexey Kardashevskiy
By mistake, QEMU uses the maximum compatibility level from the command line instead of the value negotiated in client-architecture-support call. This replaces @max_compat with @cpu_version. This only affects guests which do not support the host CPU. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04ppc: compute mask from BI using right shiftPaolo Bonzini
This will match the code we use in fpu_helper.c when we flip CRF_* bit-endianness. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Tom Musta <tommusta@gmail.com> Tested-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04ppc: rename gen_set_cr6_from_fpscrPaolo Bonzini
It sets CR1, not CR6 (and the spec agrees). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Tom Musta <tommusta@gmail.com> Tested-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04ppc: fix result of DLMZB when no zero bytes are foundPaolo Bonzini
It must return 8 and place 8 in XER, but the current code uses i directly which is 9 at this point of the code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04ppc: use CRF_* in int_helper.cPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Tom Musta <tommusta@gmail.com> Tested-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04ppc: fix monitor access to CRPaolo Bonzini
This was off-by-one. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' ↵Peter Maydell
into staging QOM infrastructure fixes and device conversions * Fixes for -device foo,help # gpg: Signature made Tue 04 Nov 2014 17:27:41 GMT using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/qom-devices-for-peter: qdev: Use qdev_get_device_class() for -device <type>,help qdev: Move error printing to the end of qdev_device_help() qdev: Create qdev_get_device_class() function Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-04qdev: Use qdev_get_device_class() for -device <type>,helpEduardo Habkost
Make sure we try to list properties from classes that can be safely used with "-device". Fixes the following crashes: $ qemu-system-x86_64 -device x86_64-cpu,help ** ERROR:qom/object.c:336:object_initialize_with_type: assertion failed: (type->abstract == false) Aborted (core dumped) $ qemu-system-x86_64 -device host-x86_64-cpu,help qemu-system-x86_64: [...]/target-i386/cpu.c:1329: host_x86_cpu_initfn: Assertion `(kvm_allowed)' failed. Aborted (core dumped) After applying this patch: $ qemu-system-x86_64 -device x86_64-cpu,help Parameter 'driver' expects non-abstract device type $ qemu-system-x86_64 -device host-x86_64-cpu,help Parameter 'driver' expects pluggable device type Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-11-04qdev: Move error printing to the end of qdev_device_help()Eduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-11-04qdev: Create qdev_get_device_class() functionEduardo Habkost
Extract the DeviceClass lookup from qdev_device_add() to a separate function. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-11-04Merge remote-tracking branch 'remotes/afaerber/tags/qom-cpu-for-peter' into ↵Peter Maydell
staging QOM CPUState and X86CPU * Cleanups for -cpu ...,enforce * remotes/afaerber/tags/qom-cpu-for-peter: target-i386: Disable SVM by default in KVM mode target-i386: Don't enable nested VMX by default target-i386: Remove unsupported bits from all CPU models target-i386: Disable CPUID_ACPI by default in KVM mode target-i386: Rename KVM auto-feature-enable compat function pc: Create pc_compat_2_1() functions Conflicts: hw/i386/pc_piix.c hw/i386/pc_q35.c [PMM: Fixed minor textual conflicts] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-04Merge remote-tracking branch 'remotes/kraxel/tags/pull-gtk-20141104-2' into ↵Peter Maydell
staging gtk: fix fullscreen with gtk3, fix build with older gtk2 versions. # gpg: Signature made Tue 04 Nov 2014 13:42:09 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-gtk-20141104-2: gtk: add GDK_KEY_pause #define gtk: Hide the menubar when in fullscreen mode (lp 1294898) gtk: Install vc accelerators on parent window gtk: Install fullscreen accelerator on toplevel window gtk: Grab accel_group from GtkDisplayState Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-04target-i386: Disable SVM by default in KVM modeEduardo Habkost
Make SVM be disabled by default on all CPU models when in KVM mode. Nested SVM is enabled by default in the KVM kernel module, but it is probably less stable than nested VMX (which is already disabled by default). Add a new compat function, x86_cpu_compat_kvm_no_autodisable(), to keep compatibility on previous machine-types. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-11-04target-i386: Don't enable nested VMX by defaultEduardo Habkost
TCG doesn't support VMX, and nested VMX is not enabled by default in the KVM kernel module. So, there's no reason to have VMX enabled by default on the core2duo and coreduo CPU models, today. Even the newer Intel CPU model definitions don't have it enabled. In this case, we need machine-type compat code, as people may be running the older machine-types on hosts that had VMX nesting enabled. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-11-04target-i386: Remove unsupported bits from all CPU modelsEduardo Habkost
The following CPU features were never supported by neither TCG or KVM, so they are useless on the CPU model definitions, today: * CPUID_DTS (DS) * CPUID_HT * CPUID_TM * CPUID_PBE * CPUID_EXT_DTES64 * CPUID_EXT_DSCPL * CPUID_EXT_EST * CPUID_EXT_TM2 * CPUID_EXT_XTPR * CPUID_EXT_PDCM * CPUID_SVM_LBRV As using "enforce" mode is the only way to ensure guest ABI doesn't change when moving to a different host, we should make "enforce" mode the default or at least encourage management software to always use it. In turn, to make "enforce" usable, we need CPU models that work without always requiring some features to be explicitly disabled. This patch removes the above features from all CPU model definitions. We won't need any machine-type compat code for those changes, because it is impossible to have existing VMs with those features enabled. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-11-04target-i386: Disable CPUID_ACPI by default in KVM modeEduardo Habkost
KVM never supported the CPUID_ACPI flag, so it doesn't make sense to have it enabled by default when KVM is enabled. The motivation here is exactly the same we had for the MONITOR flag (disabled by commit 136a7e9a85d7047461f8153f7d12c514a3d68f69). And like in the MONITOR flag case, we don't need machine-type compat code because it is currently impossible to run a KVM VM with the ACPI flag set. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-11-04gtk: add GDK_KEY_pause #defineGerd Hoffmann
Add pause key to the list of compatibility defines. Fixes the build with older gtk versions. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-11-04Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20141104' into staging target-arm queue: * avoid passing CPU env pointer around in A32/T32 decoders * split M profile exception masking out from A/R profile # gpg: Signature made Tue 04 Nov 2014 12:28:15 GMT using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * remotes/pmaydell/tags/pull-target-arm-20141104: target-arm: Correct condition for taking VIRQ and VFIQ target-arm: Separate out M profile cpu_exec_interrupt handling target-arm/translate.c: Don't pass CPUARMState * to disas_arm_insn() target-arm/translate.c: Don't pass CPUARMState around in the decoder target-arm/translate.c: Don't use IS_M() target-arm/translate.c: Use arm_dc_feature() rather than arm_feature() target-arm/translate.c: Use arm_dc_feature() in ENABLE_ARCH_ macros Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-04Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios-signed' ↵Peter Maydell
into staging Update OpenBIOS images # gpg: Signature made Tue 04 Nov 2014 00:24:41 GMT using RSA key ID AE0F321F # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" * remotes/mcayland/tags/qemu-openbios-signed: Update OpenBIOS images Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-04target-arm: Correct condition for taking VIRQ and VFIQPeter Maydell
The VIRQ and VFIQ exceptions are (as the comments say) only taken if the CPU is in Non-secure state and the IMO/FMO bits are set to enable virtualized interrupts. Correct the code to actually implement this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1414684132-23971-3-git-send-email-peter.maydell@linaro.org
2014-11-04target-arm: Separate out M profile cpu_exec_interrupt handlingPeter Maydell
The M profile cpu_exec_interrupt handling is fairly simple but does include an M profile specific oddity (disabling interrupts for certain PC values). A/R profile handling on the other hand is getting rapidly more complicated with the support for EL2 and EL3. Split the M profile code out into its own implementation of cpu_exec_interrupt to keep these two things out of each others' way. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1414684132-23971-2-git-send-email-peter.maydell@linaro.org
2014-11-04target-arm/translate.c: Don't pass CPUARMState * to disas_arm_insn()Peter Maydell
Refactor to avoid passing a CPUARMState * to disas_arm_insn(). To do this we move the "read insn from memory" code to the callsite and pass the insn to the function instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1414524244-20316-6-git-send-email-peter.maydell@linaro.org Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2014-11-04target-arm/translate.c: Don't pass CPUARMState around in the decoderPeter Maydell
Passing the CPUARMState around in the decoder is a recipe for bugs where we accidentally generate code that depends on CPU state which isn't reflected in the TB flags. Stop doing this and instead use DisasContext as a way to pass around those bits of CPU state which are known to be safe to use. This commit simply removes initial "CPUARMState *env" parameters from various function definitions, and removes the initial "env" argument from the places where those functions are called. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1414524244-20316-5-git-send-email-peter.maydell@linaro.org Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2014-11-04target-arm/translate.c: Don't use IS_M()Peter Maydell
Instead of using IS_M(), use arm_dc_feature(s, ARM_FEATURE_M), so we don't need to pass CPUARMState pointers around the decoder. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1414524244-20316-4-git-send-email-peter.maydell@linaro.org Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2014-11-04target-arm/translate.c: Use arm_dc_feature() rather than arm_feature()Peter Maydell
Use arm_dc_feature() rather than arm_feature() to avoid using CPUARMState unnecessarily. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1414524244-20316-3-git-send-email-peter.maydell@linaro.org Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2014-11-04gtk: Hide the menubar when in fullscreen mode (lp 1294898)Cole Robinson
In fullscreen mode, we attempt to shrink the menubar to 1 pixel in height, so it takes up as little room as possible while still allowing us to use the keyboard shortcuts for its various operations. However this shrinking is disregarded on gtk3, so the entire menu bar is visible, which isn't very pleasant. This patch hides the menu bar instead. The side effect is that the only keyboard shortcuts that will work in this mode are the ones that we explicitly register on the top level window and not the menu bar. The previous patches changed the fullscreen and vc shortcuts to work like that, which I think are the only ones that really matter in for the fullscreen case. https://bugs.launchpad.net/qemu/+bug/1294898 Signed-off-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-11-04gtk: Install vc accelerators on parent windowCole Robinson
So they are usable when we hide the menubar in upcoming patches. This has the accelerator text caveat as the fullscreen bit in the previous patch. Signed-off-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-11-04gtk: Install fullscreen accelerator on toplevel windowCole Robinson
Instead of installing it on the menu. This will be needed to keep the fullscreen keyboard shortcut working when we hide the menu (in future patches). On gtk < 3.8, this has the unfortunate side effect of no longer listing the key combo in the UI. We could manually change the label in that case, but it will look visually out of place, and I'm not sure if anyone really cares. Signed-off-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-11-04gtk: Grab accel_group from GtkDisplayStateCole Robinson
Rather than needlessly pass it around Signed-off-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-11-04target-arm/translate.c: Use arm_dc_feature() in ENABLE_ARCH_ macrosPeter Maydell
All the places where we use the ENABLE_ARCH_* and ARCH() macros have a DisasContext* s, so switch them over to use arm_dc_feature() rather than arm_feature() so we don't need to pass the CPUARMState* env around too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1414524244-20316-2-git-send-email-peter.maydell@linaro.org Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2014-11-04Merge remote-tracking branch 'remotes/lalrae/tags/mips-20141103' into stagingPeter Maydell
* remotes/lalrae/tags/mips-20141103: (34 commits) target-mips: add MSA support to mips32r5-generic disas/mips.c: disassemble MSA instructions target-mips: add MSA MI10 format instructions target-mips: add MSA 2RF format instructions target-mips: add MSA VEC/2R format instructions target-mips: add MSA 3RF format instructions target-mips: add MSA ELM format instructions target-mips: add MSA 3R format instructions target-mips: add MSA BIT format instructions target-mips: add MSA I5 format instruction target-mips: add MSA I8 format instructions target-mips: add MSA branch instructions target-mips: add msa_helper.c target-mips: add msa_reset(), global msa register target-mips: add MSA opcode enum target-mips: stop translation after ctc1 target-mips: remove duplicated mips/ieee mapping function target-mips: add MSA exceptions target-mips: add MSA defines and data structure target-mips: enable features in MIPS64R6-generic CPU ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-04Update OpenBIOS imagesMark Cave-Ayland
Update OpenBIOS images to SVN r1321 built from submodule. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2014-11-03Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc, virtio, misc bugfixes A bunch of minor bugfixes all over the place. changes from v2: added cpu hotplug rework added default vga type switch more fixes changes from v1: fix for test re-generation script add missing acks to two patches Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 03 Nov 2014 16:33:13 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (28 commits) vga: flip qemu 2.2 pc machine types from cirrus to stdvga vga: add default display to machine class vhost-user: fix mmap offset calculation hw/i386/acpi-build.c: Fix memory leak in acpi_build_tables_cleanup() smbios: Encode UUID according to SMBIOS specification pc: Add pc_compat_2_1() function hw/virtio/vring/event_idx: fix the vring_avail_event error hw/pci: fixed hotplug crash when using rombar=0 with devices having romfile hw/pci: fixed error flow in pci_qdev_init -machine vmport=off: Allow disabling of VMWare ioport emulation acpi/cpu-hotplug: introduce helper function to keep bit setting in one place cpu-hotplug: rename function for better readability qom/cpu: remove the unused CPU hot-plug notifier pc: Update rtc_cmos in pc_cpu_plug pc: add cpu hotplug handler to PC_MACHINE acpi:piix4: convert cpu hotplug to hotplug_handler API acpi:ich9: convert cpu hotplug to hotplug_handler API acpi/cpu: add cpu hotplug callback function to match hotplug_handler API acpi: create separate file for TCPA log tests: fix rebuild-expected-aml.sh for acpi-test rename ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-03Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20141101' ↵Peter Maydell
into staging linux-user pull for 2.2 Two minor fixes and new a feature, addition of QEMU_RAND_SEED for testing needs. # gpg: Signature made Mon 03 Nov 2014 11:49:39 GMT using RSA key ID DE3C9BC0 # gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>" # gpg: aka "Riku Voipio <riku.voipio@linaro.org>" * remotes/riku/tags/pull-linux-user-20141101: elf: take phdr offset into account when calculating the program load address linux-user: Fix fault address truncation AArch64 linux-user: Let user specify random seed Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-03target-i386: Rename KVM auto-feature-enable compat functionEduardo Habkost
The x86_cpu_compat_disable_kvm_features() name was a bit confusing, as it won't forcibly disable the feature for all CPU models (i.e. add it to kvm_default_unset_features), but it will instead turn off the KVM auto-enabling of the feature (i.e. remove it from kvm_default_features), meaning the feature may still be enabled by default in some CPU models). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-11-03pc: Create pc_compat_2_1() functionsEduardo Habkost
We will need new compat code for the 2.1 machine-types. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-11-03Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Mon 03 Nov 2014 11:50:53 GMT using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: (53 commits) block: declare blockjobs and dataplane friends! block: let commit blockjob run in BDS AioContext block: let mirror blockjob run in BDS AioContext block: let stream blockjob run in BDS AioContext block: let backup blockjob run in BDS AioContext block: add bdrv_drain() blockjob: add block_job_defer_to_main_loop() blockdev: add note that block_job_cb() must be thread-safe blockdev: acquire AioContext in blockdev_mark_auto_del() blockdev: acquire AioContext in do_qmp_query_block_jobs_one() block: acquire AioContext in generic blockjob QMP commands iotests: Expand test 061 block/qcow2: Simplify shared L2 handling in amend block/qcow2: Make get_refcount() global block/qcow2: Implement status CB for amend qemu-img: Fix insignificant memleak qemu-img: Add progress output for amend block: Add status callback to bdrv_amend_options() block: qemu-iotest 107 supports NFS iotests: Add test for qcow2's bdrv_make_empty ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-03Merge remote-tracking branch 'remotes/xtensa/tags/20141103-xtensa' into stagingPeter Maydell
Xtensa fixes and improvements 2014-11-03: - build fixes for cores w/o windowed registers and with profiling interrupts; - fix uImage load address for MMUv2 cores; - add script for automatic core import from xtensa configuration overlay. # gpg: Signature made Sun 02 Nov 2014 22:04:44 GMT using RSA key ID F83FA044 # gpg: Good signature from "Max Filippov <max.filippov@cogentembedded.com>" # gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" * remotes/xtensa/tags/20141103-xtensa: MAINTAINERS: update xtensa boards target-xtensa: fix build for cores w/o windowed registers target-xtensa: add core importing script hw/xtensa/xtfpga: treat uImage load address as virtual hw/core/loader: implement address translation in uimage loader target-xtensa: avoid duplicate timer interrupt delivery target-xtensa: tests: pre-process tests linker script target-xtensa: add definition for XTHAL_INTTYPE_PROFILING Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-03vga: flip qemu 2.2 pc machine types from cirrus to stdvgaGerd Hoffmann
This patch switches the default display from cirrus to vga for the new (qemu 2.2+) machine types. Old machines types stay as-is for compatibility reasons. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 12:42:39 +0000