Age | Commit message (Collapse) | Author |
|
Because non-embedded aarch64 is expected to have AdvSIMD enabled, merely
double-check with the compiler flags for __ARM_NEON and don't bother with
a runtime check. Otherwise, model the loop after the x86 SSE2 function.
Use UMAXV for the vector reduction. This is 3 cycles on cortex-a76 and
2 cycles on neoverse-n1.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Because the three alternatives are monotonic, we don't need
to keep a couple of bitmasks, just identify the strongest
alternative at startup.
Generalize test_buffer_is_zero_next_accel and init_accel
by always defining an accel_table array.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Split less-than and greater-than 256 cases.
Use unaligned accesses for head and tail.
Avoid using out-of-bounds pointers in loop boundary conditions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Increase unroll factor in SIMD loops from 4x to 8x in order to move
their bottlenecks from ALU port contention to load issue rate (two loads
per cycle on popular x86 implementations).
Avoid using out-of-bounds pointers in loop boundary conditions.
Follow SSE2 implementation strategy in the AVX2 variant. Avoid use of
PTEST, which is not profitable there (like in the removed SSE4 variant).
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Mikhail Romanov <mmromanov@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240206204809.9859-6-amonakov@ispras.ru>
|
|
Use of prefetching in bufferiszero.c is quite questionable:
- prefetches are issued just a few CPU cycles before the corresponding
line would be hit by demand loads;
- they are done for simple access patterns, i.e. where hardware
prefetchers can perform better;
- they compete for load ports in loops that should be limited by load
port throughput rather than ALU throughput.
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Mikhail Romanov <mmromanov@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240206204809.9859-5-amonakov@ispras.ru>
|
|
Test for length >= 256 inline, where is is often a constant.
Before calling into the accelerated routine, sample three bytes
from the buffer, which handles most non-zero buffers.
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Mikhail Romanov <mmromanov@ispras.ru>
Message-Id: <20240206204809.9859-3-amonakov@ispras.ru>
[rth: Use __builtin_constant_p; move the indirect call out of line.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Thanks to early checks in the inline buffer_is_zero wrapper, the SIMD
routines are invoked much more rarely in normal use when most buffers
are non-zero. This makes use of AVX512 unprofitable, as it incurs extra
frequency and voltage transition periods during which the CPU operates
at reduced performance, as described in
https://travisdowns.github.io/blog/2020/01/17/avxfreq1.html
Signed-off-by: Mikhail Romanov <mmromanov@ispras.ru>
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240206204809.9859-4-amonakov@ispras.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The SSE4.1 variant is virtually identical to the SSE2 variant, except
for using 'PTEST+JNZ' in place of 'PCMPEQB+PMOVMSKB+CMP+JNE' for testing
if an SSE register is all zeroes. The PTEST instruction decodes to two
uops, so it can be handled only by the complex decoder, and since
CMP+JNE are macro-fused, both sequences decode to three uops. The uops
comprising the PTEST instruction dispatch to p0 and p5 on Intel CPUs, so
PCMPEQB+PMOVMSKB is comparatively more flexible from dispatch
standpoint.
Hence, the use of PTEST brings no benefit from throughput standpoint.
Its latency is not important, since it feeds only a conditional jump,
which terminates the dependency chain.
I never observed PTEST variants to be faster on real hardware.
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Mikhail Romanov <mmromanov@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240206204809.9859-2-amonakov@ispras.ru>
|
|
plugins: Rewrite plugin tcg expansion
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmYyUpkdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV98VAgAoTqIWPHtPJOS800G
# TlFuQjkEzQCPSKAh6ZbotsAMvfNwBloPpdrUlFr/jT7mURjEl2B7UC/4LzdhuGeQ
# U/xZt5rXsYvyfS3VwLf8pKBIscF7XjJ1rdfYMvBg9XaNp5VV0aEIk3+6P0uYtzXG
# cREF0uCYfdK6uoiuifhqRAkgrNnamdwpPbbfvzDQI13wICW7SfR7dcd629clVZ1O
# QvD1M4bpTWyhClbZzaoHqyPs+HQEM/AY0wOTfYZNbQBu6zFZXNDZCvYhIEWonPBO
# AKe5KWUrQMwLJhRVejaSSZZDjMdcz3HLaGJppP89/WB+gpY09+LsiuqT7k5c12Bw
# ueLEhw==
# =mn63
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 01 May 2024 07:32:57 AM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-20240501' of https://gitlab.com/rth7680/qemu:
plugins: Update the documentation block for plugin-gen.c
plugins: Inline plugin_gen_empty_callback
plugins: Merge qemu_plugin_tb_insn_get to plugin-gen.c
plugins: Split out common cb expanders
plugins: Replace pr_ops with a proper debug dump flag
plugins: Introduce PLUGIN_CB_MEM_REGULAR
plugins: Simplify callback queues
tcg: Remove INDEX_op_plugin_cb_{start,end}
tcg: Remove TCG_CALL_PLUGIN
plugins: Remove plugin helpers
plugins: Use emit_before_op for PLUGIN_GEN_FROM_MEM
plugins: Use emit_before_op for PLUGIN_GEN_FROM_INSN
plugins: Add PLUGIN_GEN_AFTER_TB
plugins: Use emit_before_op for PLUGIN_GEN_FROM_TB
plugins: Use emit_before_op for PLUGIN_GEN_AFTER_INSN
plugins: Create TCGHelperInfo for all out-of-line callbacks
plugins: Move function pointer in qemu_plugin_dyn_cb
plugins: Zero new qemu_plugin_dyn_cb entries
tcg: Pass function pointer to tcg_gen_call*
tcg: Make tcg/helper-info.h self-contained
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
ufs queue
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEUBfYMVl8eKPZB+73EuIgTA5dtgIFAmYvEScACgkQEuIgTA5d
# tgL3Qg//R3IcISQqqDaJ/ySzKGmkyohJSc6ySLYvla4Aki7PV+um2Dx/XNS7uG2b
# d3Qz4m6QaOKsocLfldRTn2FxVK238Rp5HNny5vc0kGRdwpR514B7aU0FhpT7qObS
# wbbgRdDddIBIiCFLhtXtg5/TK2h32VxGrVI6llX4gmd2VzqM0e4xeG1Oj8rZseOY
# SAgvDv68s1YwlO1p1vPvst/H+mUKYkqtPN1mjfCIn5tM6ss8kCLUnKjqGAg1BnSN
# xwaGrqqOlzQK2+aV02eiItiow8evU/h+c9eiTnBo/EvBwjoBn6flNXABWXFENnmP
# JjVIFeiNzSFhBPDzO23GXviuEt96j5lrcGYR48HYMZfEbJNpblXzWvEGMZWnXNgx
# Q3cpcarZ4vSWIflR9OnCSQaGLA0Ny6YqLbmrM/oD+v67EITafKKc+flmiF7DBASB
# fUoEsdffdA37LDtygJb7hfUhvPQWWAujmGzZ1cDP8Oa0MhT7aiD0Z/WqhhjVQbM0
# iLiCDDD0cc0pmT3vw3EnEjKjnSkY3H62Q7pnYHiQgij4Ls/Rdd/P7OkSd0aI82t0
# TooWGZJnyf8rjAzY2cEB1Twrhmhuyt9NnGxip9W8JsQBZMLabD2CahOm83zsk7jZ
# 3fOONz6XrW2ttFkLZcRd4x4YjKONjEXsSX2ZrXTZ5t3USz/VNvY=
# =Vwyi
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 28 Apr 2024 08:16:55 PM PDT
# gpg: using RSA key 5017D831597C78A3D907EEF712E2204C0E5DB602
# gpg: Good signature from "Jeuk Kim <jeuk20.kim@samsung.com>" [unknown]
# gpg: aka "Jeuk Kim <jeuk20.kim@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5017 D831 597C 78A3 D907 EEF7 12E2 204C 0E5D B602
* tag 'pull-ufs-20240429' of https://gitlab.com/jeuk20.kim/qemu:
hw/ufs: Fix buffer overflow bug
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
staging
qga-pull-2024-05-01
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEwsLBCepDxjwUI+uE711egWG6hOcFAmYx8fgACgkQ711egWG6
# hOflAw//fDHAQzcrWFggn4Ly1p1QQK+AYdQPbmKCIV7j64k05kCFU+bQxbMT9Fmr
# RsWPXHv5t36ySKxaML412r7fqX19bm7RP31hlau76KtZsTJXFR/dbC6jNWXi/Qfd
# 5Z1mwK4lyW+TROPx6gA2tZddqAZsSxLlArhXGj9nUcQBXDebKD/rO4jYrRBWI7uG
# hV2mmolGbsNSzinfhujY2yVpm3SMEEc9IQ/CDd11HUsgJjAkXVxCDfKDXCmMKUAm
# 7B6VYjQpy6zjXG/eWxIp2b7HVyEEAazHizk431IwDPXpf4G8kecEVTEdQrh6tea1
# ojlfv4KhA5TuKSrhUKO+hGWeXbHfORhxryjagbwGnTd15Dq7B8SEMcubuNXJJiLJ
# G9kuqvAOrZcE/TQbdAr5Zv2vpg0Hh0ZsOrFCn+THES31oD5mgeLTwmXcguPwEyBV
# BT2Pd1UwOXumS+L065Am7PRm+i80C1J3e1dcN9+puBdNkp/kwR9RLMxDpKwEEVtI
# CMpiay4K5evFvXPAl6zFLKOYaeUiEKsxSwfj6A4ZgkuKWPb0TpIqY3vdw6TwvXI+
# lk136hcOxQ6SKJOw11wESOsWgTbqOzgevNsLlQIm3l7MSGJcQOKJwWIU7VFp4qbp
# kJnMeHtlXkkpppXMMKZsa0hXWWXM+miQNSFQhdCEW7KWAWNU5dk=
# =Q49V
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 01 May 2024 12:40:40 AM PDT
# gpg: using RSA key C2C2C109EA43C63C1423EB84EF5D5E8161BA84E7
# gpg: Good signature from "Kostiantyn Kostiuk (Upstream PR sign) <kkostiuk@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: C2C2 C109 EA43 C63C 1423 EB84 EF5D 5E81 61BA 84E7
* tag 'qga-pull-2024-05-01' of https://github.com/kostyanf14/qemu:
qga: Implement SSH commands for Windows
qga: Refactor common SSH functions
qga/commands-posix: qmp_guest_set_user_password: use ga_run_command helper
qga/commands-posix: don't do fork()/exec() when suspending via sysfs
qga/commands-posix: execute_fsfreeze_hook: use ga_run_command helper
qga/commands-posix: qmp_guest_set_time: use ga_run_command helper
qga/commands-posix: qmp_guest_shutdown: use ga_run_command helper
qga: introduce ga_run_command() helper for guest cmd execution
qga: guest-get-fsinfo: add optional 'total-bytes-privileged' field
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Signed-off-by: Aidan Leuck <aidan_leuck@selinc.com>
Tested-by: Dehan Meng <demeng@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240424144029.30665-3-aidan_leuck@selinc.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Message-Id: <20240424144029.30665-2-aidan_leuck@selinc.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
In preparation of a Windows implementation, move the
non-POSIX specific code to commands-common-ssh.
Signed-off-by: Aidan Leuck <aidan_leuck@selinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Dehan Meng <demeng@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240424144029.30665-2-aidan_leuck@selinc.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
There's no need to check for the existence of the "chpasswd", "pw"
executables, as the exec() call will do that for us.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240320161648.158226-8-andrey.drobyshev@virtuozzo.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Since commit 246d76eba ("qga: guest_suspend: decoupling pm-utils and sys
logic") pm-utils logic is running in a separate child from the sysfs
logic. Now when suspending via sysfs we don't really need to do that in
a separate process as we only need to perform one write to /sys/power/state.
Let's just use g_file_set_contents() to simplify things here.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240320161648.158226-7-andrey.drobyshev@virtuozzo.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
There's no need to check for the existence of the hook executable, as the
exec() call will do that for us.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240320161648.158226-6-andrey.drobyshev@virtuozzo.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
There's no need to check for the existence of "/sbin/hwclock", the
exec() call will do that for us.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240320161648.158226-5-andrey.drobyshev@virtuozzo.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Also remove the G_GNUC_UNUSED attribute added in the previous commit from
the helper.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240320161648.158226-4-andrey.drobyshev@virtuozzo.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
When executing guest commands in *nix environment, we repeat the same
fork/exec pattern multiple times. Let's just separate it into a single
helper which would also be able to feed input data into the launched
process' stdin. This way we can avoid code duplication.
To keep the history more bisectable, let's replace qmp commands
implementations one by one. Also add G_GNUC_UNUSED attribute to the
helper and remove it in the next commit.
Originally-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240320161648.158226-3-andrey.drobyshev@virtuozzo.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Since the commit 25b5ff1a86 ("qga: add mountpoint usage info to
GuestFilesystemInfo") we have 2 values reported in guest-get-fsinfo:
used = (f_blocks - f_bfree), total = (f_blocks - f_bfree + f_bavail) as
returned by statvfs(3). While on Windows guests that's all we can get
with GetDiskFreeSpaceExA(), on POSIX guests we might also be interested in
total file system size, as it's visible for root user. Let's add an
optional field 'total-bytes-privileged' to GuestFilesystemInfo struct,
which'd only be reported on POSIX and represent f_blocks value as returned
by statvfs(3).
While here, also tweak the docs to reflect better where those values
come from.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240320161648.158226-2-andrey.drobyshev@virtuozzo.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Each caller can use tcg_gen_plugin_cb directly.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Merge qemu_plugin_insn_alloc and qemu_plugin_tb_insn_get into
plugin_gen_insn_start, since it is used nowhere else.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The DEBUG_PLUGIN_GEN_OPS ifdef is replaced with "-d op_plugin".
The second pr_ops call can be obtained with "-d op".
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Use different enumerators for vcpu_udata and vcpu_mem callbacks.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
We have qemu_plugin_dyn_cb.type to differentiate the various
callback types, so we do not need to keep them in separate queues.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
These opcodes are no longer used.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Since we no longer emit plugin helpers during the initial code
translation phase, we don't need to specially mark plugin helpers.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
These placeholder helpers are no longer required.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Introduce a new plugin_mem_cb op to hold the address temp
and meminfo computed by tcg-op-ldst.c. Because this now
has its own opcode, we no longer need PLUGIN_GEN_FROM_MEM.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Delay test of plugin_tb->mem_helper until the inject pass.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
By having the qemu_plugin_cb_flags be recorded in the TCGHelperInfo,
we no longer need to distinguish PLUGIN_CB_REGULAR from
PLUGIN_CB_REGULAR_R, so place all TB callbacks in the same queue.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Introduce a new plugin_cb op and migrate one operation.
By using emit_before_op, we do not need to emit opcodes
early and modify them later -- we can simply emit the
final set of opcodes once.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
TCGHelperInfo includes the ABI for every function call.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The out-of-line function pointer is mutually exclusive
with inline expansion, so move it into the union.
Wrap the pointer in a structure named 'regular' to match
PLUGIN_CB_REGULAR.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
For normal helpers, read the function pointer from the
structure earlier. For plugins, this will allow the
function pointer to come from elsewhere.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Move MAX_CALL_IARGS from tcg.h and include for
the define of TCG_TARGET_REG_BITS.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* hw/core/clock: allow clock_propagate on child clocks
* hvf: arm: Remove unused PL1_WRITE_MASK define
* target/arm: Restrict translation disabled alignment check to VMSA
* docs/system/arm/emulation.rst: Add missing implemented features
* target/arm: Enable FEAT_CSV2_3, FEAT_ETS2, FEAT_Spec_FPACC for 'max'
* tests/avocado: update sunxi kernel from armbian to 6.6.16
* target/arm: Make new CPUs default to 1GHz generic timer
* hw/dmax/xlnx_dpdma: fix handling of address_extension descriptor fields
* hw/char/stm32l4x5_usart: Fix memory corruption by adding correct class_size
* hw/arm/npcm7xx: Store derivative OTP fuse key in little endian
* hw/arm: Add DM163 display to B-L475E-IOT01A board
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmYxILcZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3pRzD/40UZrhNbS+FEANkXJ7qpUm
# giCKn8hVwteWY4T4LugUK9987lU0HZ7CGfsHoSaWNwa7RBdKUoDRqi/CQ1kCfeDO
# XET42do+6SJhak+4wmzEfYD+K7wnlauun0/dyqCjd2+JP0bln/MIY5r8JCN1GiYS
# YSAAKoZqAfG1bC3HmxELI9min09GPT+tzw0PAyVJipRtfE+ykZXoCytu0GWU5jB+
# VBI6SGmqMPd/c/7JfJV8KP8R0Mn3etA3hbOCx7YDL6cUmbepWtNPV8dLeTwofrpa
# 01uqN83PpbbSYr96QdXXa7Ov105hQH7e8jmr9+7jTpd3f9U7+GwsxxqDR1KDHLgn
# pUGZneoTDTkJugfXM28A0VoVB3eyJYPCLE9QQ/HXpChXc62NOQV5jcECgLiUDujH
# hVbeGEG0KViQlhMUfI3vIfTaIjEALDcNw5bxVUCqg8vdO6UtTXqqWdaS4Xgne8HB
# KeCu5xXngXEZjIgidZkmIC15FD60B19JdQz2WR+6BDCw8Ajm9iPWlj+ftZztuX/S
# cFSUZ05BPbTkBzAHG4GBvjXTdwsxX2acGBNtdETOQAxhkoRcug0Pn+BmrZQLqkm5
# mPKPW9FFxIkkgeK/ZdA4uIEwDZX/LQlnrX129XGt7DVr+yDNKekaVGfLL8x8alT1
# 3v0Ni/nntc6QtZDB88OIzA==
# =vAf/
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 30 Apr 2024 09:47:51 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20240430' of https://git.linaro.org/people/pmaydell/qemu-arm: (21 commits)
tests/qtest : Add testcase for DM163
hw/arm : Connect DM163 to B-L475E-IOT01A
hw/arm : Create Bl475eMachineState
hw/arm : Pass STM32L4x5 SYSCFG gpios to STM32L4x5 SoC
hw/display : Add device DM163
hw/arm/npcm7xx: Store derivative OTP fuse key in little endian
hw/char/stm32l4x5_usart: Fix memory corruption by adding correct class_size
hw/dmax/xlnx_dpdma: fix handling of address_extension descriptor fields
target/arm: Default to 1GHz cntfrq for 'max' and new CPUs
hw/watchdog/sbsa_gwdt: Make watchdog timer frequency a QOM property
hw/arm/sbsa-ref: Force CPU generic timer to 62.5MHz
target/arm: Refactor default generic timer frequency handling
tests/avocado: update sunxi kernel from armbian to 6.6.16
target/arm: Enable FEAT_Spec_FPACC for -cpu max
target/arm: Implement ID_AA64MMFR3_EL1
target/arm: Enable FEAT_ETS2 for -cpu max
target/arm: Enable FEAT_CSV2_3 for -cpu max
docs/system/arm/emulation.rst: Add missing implemented features
target/arm: Restrict translation disabled alignment check to VMSA
hvf: arm: Remove PL1_WRITE_MASK
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
staging
* Clean-ups for "errp" handling in s390x cpu_model code
* Fix a possible abort in the "edu" device
* Add missing qga stubs for stand-alone qga builds and re-enable qga-ssh-test
* Fix memory corruption caused by the stm32l4x5 uart device
* Update the s390x custom runner to Ubuntu 22.04
* Fix READ NATIVE MAX ADDRESS IDE commands to avoid a possible crash
* Shorten the runtime of Cirrus-CI jobs
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmYwmaMRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbUCERAAss5PJMG8rI4i4X/3nW49JYTlPOpgm/YX
# /UWF+eHUlqaqDdE0s+Pdw4Ozo3hXQt/E/CkcyflUTzVpnZtpv9vkhNWyjOoPV31v
# GQyQEzGvxZXl2S595XefyAyaMTP5maBhUTlyZWJo385cQraa60Ot5d4Mibr2CobY
# gIBRxEGB/frJYpbHJPxd/FxJV120gtuWAdZwGGYYYjwMzf2IKu2veODB8CnUErlX
# WNUsIzjtAslfh8Ek2ZmPzD7uktCUeigkukqIrLC1oEU3wzbJHkISv1kXCKPW/Nf6
# ISjVa5TqGwkiiF8fw9aYKvWrnPJS7JkhXw7Gz+b39d846kUdNyDfgLcYJeNS3cZ2
# R1xgR9B6hX8ZmikMbGC+0/Sv15u2Yr+bFxJBTJzq6zdOAb9EJNQY1hW2w/Lbrg3X
# LjY+ltcVweoSILT6AE6vGDPCHfBzO+6FcptFvw7ePvRGOlwAPZ3tEB9G2LEbCYgg
# BjWNP4aRuSfbUebO4x4Todz65WN8aY1EIBXORU/wgUlF2+zajWiOI5JRDKjWz2qQ
# gAMeCbLplli5bYrChWtouRIXtb061cQloULddu/SRFcaJOlV3SCzx4JfN15pU90s
# jRMIhMESAEj4NSfclhxsOiYp3ywZTvlQsVA6MgPlu2i3HJakQnt5zbg59TesRn2d
# r5PfAk83UnA=
# =0OB7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 30 Apr 2024 12:11:31 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
* tag 'pull-request-2024-04-30' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d/cirrus: Remove the netbsd and openbsd jobs
.gitlab-ci.d/cirrus.yml: Shorten the runtime of the macOS and FreeBSD jobs
tests/qtest/ide-test: Verify READ NATIVE MAX ADDRESS is not limited
hw/ide/core.c (cmd_read_native_max): Avoid limited device parameters
gitlab: remove stale s390x-all-linux-static conf hacks
gitlab: migrate the s390x custom machine to 22.04
build-environment: make some packages optional
hw/char/stm32l4x5_usart: Fix memory corruption by adding correct class_size
qga: Re-enable the qga-ssh-test when running without fuzzing
stubs: Add missing qga stubs
hw: misc: edu: use qemu_log_mask instead of hw_error
hw: misc: edu: rename local vars in edu_check_range
hw: misc: edu: fix 2 off-by-one errors
target/s390x/cpu_models_sysemu: Drop local @err in apply_cpu_model()
target/s390x/cpu_models: Make kvm_s390_apply_cpu_model() return boolean
target/s390x/cpu_models: Drop local @err in get_max_cpu_model()
target/s390x/cpu_models: Make kvm_s390_get_host_cpu_model() return boolean
target/s390x/cpu_model: Drop local @err in s390_realize_cpu_model()
target/s390x/cpu_model: Make check_compatibility() return boolean
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
`test_dm163_bank()`
Checks that the pin "sout" of the DM163 led driver outputs the values
received on pin "sin" with the expected latency (depending on the bank).
`test_dm163_gpio_connection()`
Check that changes to relevant STM32L4x5 GPIO pins are propagated to the
DM163 device.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-6-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-5-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-4-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Exposing SYSCFG inputs to the SoC is practical in order to wire the SoC
to the optional DM163 display from the board code (GPIOs outputs need
to be connected to both SYSCFG inputs and DM163 inputs).
STM32L4x5 SYSCFG in-irq interception needed to be changed accordingly.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This device implements the IM120417002 colors shield v1.1 for Arduino
(which relies on the DM163 8x3-channel led driving logic) and features
a simple display of an 8x8 RGB matrix. The columns of the matrix are
driven by the DM163 and the rows are driven externally.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-2-ines.varhol@telecom-paris.fr
[PMM: updated to new reset hold method prototype]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Use little endian for derivative OTP fuse key.
Cc: qemu-stable@nongnu.org
Fixes: c752bb079b ("hw/nvram: NPCM7xx OTP device model")
Suggested-by: Avi Fishman <Avi.Fishman@nuvoton.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240422125813.1403-1-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
"make check-qtest-aarch64" recently started failing on FreeBSD builds,
and valgrind on Linux also detected that there is something fishy with
the new stm32l4x5-usart: The code forgot to set the correct class_size
here, so the various class_init functions in this file wrote beyond
the allocated buffer when setting the subc->type field.
Fixes: 4fb37aea7e ("hw/char: Implement STM32L4x5 USART skeleton")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240429075908.36302-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|