| Age | Commit message (Collapse) | Author |
|---|
|
Has no business in hw/.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Move the parsing of a filedescriptor into a common function
qemu_parse_fd() so others can use it as well. Have net.c call this
function.
v2:
- moving qemu_parse_fd into cutils.c
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Suppress confusing messages from pkg_config when probing for
'check' by sending them to /dev/null as we do with other
similar probes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Currently, virtio devices are usually presented to the guest as an
emulated PCI device, virtio_pci. Although the actual IO operations
are done through system memory, the configuration of the virtio device
is done through the one PCI IO space BAR that virtio_pci presents.
But PCI IO space (aka PIO) is deprecated for modern PCI devices, and
on some systems with many PCI domains accessing PIO space can be
problematic. For example on the existing PowerVM implementation of
the PAPR spec, PCI PIO access is not supported at all. We're hoping
that our KVM implementation will support PCI PIO (once we support PCI
at all), but it will probably have some irritating limitations.
This patch, therefore, extends the virtio_pci device to have a PCI
memory space (MMIO) BAR as well as the IO BAR. The MMIO BAR contains
exactly the same registers, in exactly the same layout as the existing
PIO BAR.
Because the PIO BAR is still present, existing guest drivers should
still work fine. With this change in place, future guest drivers can
check for an MMIO BAR and use that if present (falling back to PIO
when possible to support older qemu versions).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This updates the usb-uhci device emulation to use the explicit PCI DMA
wrapper to initialize its scatter/gathjer structure. This means this
driver should not need further changes when the sglist interface is
extended to support IOMMUs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This updates the usb-ehci device emulation to use the explicit PCI DMA
wrapper to initialize its scatter/gathjer structure. This means this
driver should not need further changes when the sglist interface is
extended to support IOMMUs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This updates the PCI IDE device emulation to use the explicit PCI DMA
wrapper to initialize its scatter/gathjer structure. This means this
driver should not need further changes when the sglist interface is
extended to support IOMMUs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This updates the intel-hda device emulation to use the explicit PCI DMA
functions, instead of directly calling physical memory access functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This updates the pcnet-pci device emulation to use the explicit PCI DMA
functions, instead of directly calling physical memory access functions.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This updates the lsi53c895a device emulation to use the explicit PCI DMA
functions, instead of directly calling physical memory access functions.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This updates the e1000 device emulation to use the explicit PCI DMA
functions, instead of directly calling physical memory access functions.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This updates the es1370 device emulation to use the explicit PCI DMA
functions, instead of directly calling physical memory access functions.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This updates the ac97 device emulation to use the explicit PCI DMA
functions, instead of directly calling physical memory access functions.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This updates the eepro100 device emulation to use the explicit PCI DMA
functions, instead of directly calling physical memory access functions.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This updates the rtl8139 device emulation to use the explicit PCI DMA
functions, instead of directly calling physical memory access functions.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch adds functions to pci.[ch] to perform PCI DMA operations.
At present, these are just stubs which perform directly cpu physical
memory accesses. Stubs are included which are analogous to
cpu_physical_memory_{read,write}(), the stX_phys() and ldX_phys()
functions and cpu_physical_memory_{map,unmap}().
In addition, a wrapper around qemu_sglist_init() is provided, which
also takes a PCIDevice *. It's assumed that _init() is the only
sglist function which will need wrapping, the idea being that once we
have IOMMU support whatever IOMMU context handle the wrapper derives
from the PCI device will be stored within the sglist structure for
later use.
Using these stubs, however, distinguishes PCI device DMA transactions from
other accesses to physical memory, which will allow PCI IOMMU support to
be added in one place, rather than updating every PCI driver at that time.
That is, it allows us to update individual PCI drivers to support an IOMMU
without having yet determined the details of how the IOMMU emulation will
operate. This will let us remove the most bitrot-sensitive part of an
IOMMU patch in advance.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch uses the newly created dma_addr_t type throughout the
scatter/gather handling code in dma-helpers.c whenever we need to
represent a dma bus address. This makes a better distinction as to
what is a bus address and what is a cpu physical address. Since we
don't support IOMMUs yet, they can't be very different for now, but
that will change in future, and this preliminary helps clarify what's
going on.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
As a preliminary to adding more extensive DMA and IOMMU infrastructure
support into qemu, this patch defines a dma_addr_t for storing DMA bus
addresses and a DMADirection enum which describes whether a DMA is
from an external device to main memory or from main memory to an
external device.
For now dma_addr_t is just defined to be target_phys_addr_t, but in
future, we can change this to support machines where we have bus
addresses which don't necessarily have the same format as CPU physical
addresses.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Make the ps2 device track its ledstate so that we can migrate it.
Otherwise it gets lost across migration, and spice-server gets
confused about the actual keyboard state and sends bogus
caps/scroll/num key events. This fixes RH bug #729294
We only need to migrate the state when it is different of the default
one (0).
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Please note that mechlist still uses malloc / strdup / free.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
There are 508 non-indented (non-default) labels, and 511 that are
indented. So the rule is debatable at least. Actually, in the
common case of labels at the outermost scope, there is really just
one place where to put the label, so the rule is just wrong IMHO.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
And kvm_ioctl(s, KVM_CREATE_VM, 0)'s return value can be < -1,
so change the check of vmfd at label 'err'.
Signed-off-by: Xu He Jie <xuhj@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This reverts commit f90a9d02401eeeec18a122b61ccccb91244f321c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
* 'ppc-next' of git://repo.or.cz/qemu/agraf: (24 commits)
pseries: Add partial support for PCI
ppc: Alter CPU state to mask out TCG unimplemented instructions as appropriate
pseries: Allow writes to KVM accelerated TCE table
KVM: PPC: Override host vmx/vsx/dfp only when information known
ppc: Fix up usermode only builds
pseries: Correct vmx/dfp handling in both KVM and TCG cases
PPC: Fail configure when libfdt is not available
ppc: Avoid decrementer related kvm exits
PPC: Disable non-440 CPUs for ppcemb target
PPC: Bump qemu-system-ppc to 64-bit physical address space
pseries: Under kvm use guest cpu = host cpu by default
ppc: Add cpu defs for POWER7 revisions 2.1 and 2.3
ppc: First cut implementation of -cpu host
ppc: Remove broken partial PVR matching
pseries: Update SLOF firmware image
pseries: Add device tree properties for VMX/VSX and DFP under kvm
ppc: Generalize the kvmppc_get_clockfreq() function
Set an invalid-bits mask for each SPE instructions
pseries: Update SLOF firmware image
pseries: Use Book3S-HV TCE acceleration capabilities
...
|
|
|
|
|
|
|
|
|
|
OpenCores 10/100 Mbps Ethernet MAC specification doesn't clearly state
whether FCS is counted in the RX frame length or not. Looks like it is.
Append zero FCS to the received frames.
Get rid of big static buffer for RX frame padding, optimize it for the
most common MINFL value range.
Set RXD_TL for the long frames only when HUGEN bit is set.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch increases robustness when migrating to a file with
two little changes:
(1) Before closing the migration file handle checks if it happens to be
a regular file and if so it issues a fsync. This way the data is
flushed to disk before qemu sends the migration completed event.
(2) It adds error checking. In case either fsync or close syscall
fails pass up the error (and fail migration).
[ v2: return -errno instead of -1 ]
Cc: Juan Quintela <quintela@redhat.com>
Cc: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
There is a "test-coroutine" which isn't in the list.
Add it so "make check" runs it too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Add some Makefile glue so we have a simple "make check"
to run the unit tests.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Create a new CHECKS variable. Put the checks there instead
of adding them to the TOOLS variable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Probe for libcheck and build checks (if found) by default.
Can be explicitly disabled using --disable-check-utests.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Undefine ABS to avoid a clash with the macro that glib.h
helpfully defines for us (and a resulting build failure
on ia64 hosts).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
A simple migration reproduces it:
1. Start the source VM with:
# qemu [...] -S
2. Start the destination VM with:
# qemu <source VM cmd-line> -incoming tcp:0:4444
3. In the source VM:
(qemu) migrate -d tcp:0:4444
4. The source VM will segfault as soon as migration completes (might not
happen in the first try)
What is happening here is that qemu_file_put_notify() can end up closing
's->file' (in which case it's also set to NULL). The call stack is rather
complex, but Eduardo helped tracking it to:
select loop -> migrate_fd_put_notify() -> qemu_file_put_notify() ->
buffered_put_buffer() -> migrate_fd_put_ready() ->
migrate_fd_completed() -> migrate_fd_cleanup().
To be honest, it's not completely clear to me in which cases 's->file'
is not closed (on error maybe)? But I doubt this fix will make anything
worse.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
.gitignore already lists the qapi-generated subdirectory which includes a
number of files generated during build. However, there are some additional
files generated by the qapi build which go in the top level directory.
This patch adds them to .gitignore, removing the irritating noise from
diffs and the like.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
qemu-barrier.h tests if macro __powerpc__ is defined, however, the
preprocessor on PowerPC Mac OS X defines only __POWERPC__, not
__powerpc__. Resolve by testing instead for qemu-provided _ARCH_PPC.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
After the removal of the non-threaded mode cpu_exec_all is now only used
by TCG. Refactor it accordingly, also dropping its unused return value.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Make cpu_single_env thread-local. This fixes a regression
in handling of multi-threaded programs in linux-user mode
(bug 823902).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Peter Maydell: rename tls_cpu_single_env to cpu_single_env]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Drop the cpu_single_env definition as it is unused.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Add an abstraction layer for defining and using thread-local
variables. For the moment this is implemented only for Linux,
which means they can only be used in restricted circumstances.
The abstraction layer allows us to add POSIX and Win32 support
later.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Spotted via code review, we initialize offset to 0 to avoid a
compiler warning, but in the unlikely case that offset is
never set to something else, we should abort instead of return
a value that will almost certainly cause problems.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The whole usb_host_close() function is skipped in case the device is not
in attached state. This is wrong though, only then usb_device_detach()
must be skipped, all other cleanup (especially device reset and closing
the file handle) still needs to be done. There are code paths where
usb_host_close() is called with the device in detached state already.
This fixes usb-host devices not being released and returned to the host
after removing them with device_del.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Some USB drivers, for example USBASPI.SYS, will skip different type of
device which has same VID/PID. The following patch helps preventing
usb-msd being skipped by the driver.
Signed-off-by: Roy Tam <roytam@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Valgrind is a tool which can automatically detect many kinds of bugs.
Running QEMU on Valgrind with x86_64 hosts was not possible because
Valgrind aborts when memalign is called with an alignment larger than
1 MiB. QEMU normally uses 2 MiB on Linux x86_64.
Now the alignment is reduced to the page size when QEMU is running on
Valgrind.
v2:
Instead of using the macro RUNNING_ON_VALGRIND from valgrind.h,
the patch now uses a hack from libvirt which tests for the pre-loaded
vgpreload_*.so shared libraries. This avoids the need for valgrind.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Officially take on maintainership for PReP and upgrade to Odd Fixes.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Alexander Graf <agraf@suse.de>
Cc: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
