aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-03-04hmp: info spice: take out webdavGerd Hoffmann
Obvious suggestion for the next spice-protocol release: Add some way to #ifdef new stuff. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Cole Robinson <crobinso@redhat.com>
2015-03-03hmp: info spice: Show string channel nameCole Robinson
Useful for debugging. https://bugzilla.redhat.com/show_bug.cgi?id=822418 Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-03qxl: drop update_displaychangelistener call for secondary qxl devicesGerd Hoffmann
Commit 3dcadce5076d4b42fa395c39662d65e050b77784 added three update_displaychangelistener call sites: Two for primary qxl cards, when entering/leaving vga mode, which are correct. One for secondary qxl cards, which is wrong because we don't register a displaychangelistener in the first place for secondary cards. Remove it. Reported-by: Brad Campbell <lists2009@fnarfbargle.com> Tested-by: Brad Campbell <lists2009@fnarfbargle.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-03vga: refactor vram_size clamping and roundingRadim Krčmář
Make the code a bit more obvious. We don't have min/max, so a general helper for clamp probably isn't acceptable either. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-03qxl: refactor rounding up to a nearest power of 2Radim Krčmář
We already have pow2floor, mirror it and use instead of a function with similar results (same in used domain), to clarify our intent. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-03spice: fix invalid memory access to vga.vramRadim Krčmář
vga_common_init() doesn't allow more than 256 MiB vram size and silently shrinks any larger value. qxl_dirty_surfaces() used the unshrinked size via qxl->shadow_rom.surface0_area_size when accessing the memory, which resulted in segfault. Add a workaround for this case and an assert if it happens again. We have to bump the vga memory limit too, because 256 MiB wouldn't have allowed 8k (it requires more than 128 MiB). 1024 MiB doesn't work, but 512 MiB seems fine. Proposed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-03qxl: document minimal video memory for new modesRadim Krčmář
The alternative to removing existing comments. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-03Revert "Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/x86-pull-request' into staging" This reverts commit b8a173b25c887a606681fc35a46702c164d5b2d0, reversing changes made to 5de090464f1ec5360c4f30faa01d8a9f8826cd58. (I applied this pull request when I should not have done so, and am now immediately reverting it.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-02Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into ↵Peter Maydell
staging * remotes/ehabkost/tags/x86-pull-request: target-i386: Move APIC ID compatibility code to pc.c target-i386: Require APIC ID to be explicitly set before CPU realize target-i386: Set APIC ID using cpu_index on CONFIG_USER linux-user: Check for cpu_init() errors target-i386: Move CPUX86State.cpuid_apic_id to X86CPU.apic_id target-i386: Simplify error handling on cpu_x86_init_user() target-i386: Eliminate cpu_init() function target-i386: Rename cpu_x86_init() to cpu_x86_init_user() target-i386: Move topology.h to include/hw/i386 target-i386: Eliminate unnecessary get_cpuid_vendor() function target-i386: Simplify listflags() function Conflicts: target-i386/cpu.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-02Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' ↵Peter Maydell
into staging QOM infrastructure fixes and device conversions * Assertion fix for device_add with non-device types * Documentation fix * qdev_init() error reporting cleanups # gpg: Signature made Tue Feb 24 13:56:33 2015 GMT using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/qom-devices-for-peter: parallel: parallel_hds_isa_init() shouldn't fail parallel: Factor out common parallel_hds_isa_init() serial: serial_hds_isa_init() shouldn't fail serial: Factor out common serial_hds_isa_init() etsec: Replace qdev_init() by qdev_init_nofail() leon3: Replace unchecked qdev_init() by qdev_init_nofail() ide/isa: Replace unchecked qdev_init() by qdev_init_nofail() qdev: Improve qdev_init_nofail()'s error reporting qom: Fix typo, 'my_class_init' -> 'derived_class_init' qdev: Avoid type assertion in qdev_build_hotpluggable_device_list() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-02Merge remote-tracking branch 'remotes/ehabkost/tags/numa-pull-request' into ↵Peter Maydell
staging NUMA fixes queue # gpg: Signature made Mon Feb 23 19:28:42 2015 GMT using RSA key ID 984DC5A6 # gpg: Can't check signature: public key not found * remotes/ehabkost/tags/numa-pull-request: numa: Rename set_numa_modes() to numa_post_machine_init() numa: Rename option parsing functions numa: Move QemuOpts parsing to set_numa_nodes() numa: Make max_numa_nodeid static numa: Move NUMA globals to numa.c vl.c: Remove unnecessary zero-initialization of NUMA globals numa: Move NUMA declarations from sysemu.h to numa.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-26Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into stagingPeter Maydell
* remotes/qmp-unstable/queue/qmp: qapi-types: add C99 index names to arrays monitor: Fix missing err = NULL in client_migrate_info() balloon: Fix typo hmp: Fix warning from smatch (wrong argument in function call) Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-26Merge remote-tracking branch 'remotes/kraxel/tags/pull-roms-20150219-1' into ↵Peter Maydell
staging seabios: update to 1.8.0 release # gpg: Signature made Thu Feb 19 08:36:30 2015 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-roms-20150219-1: seabios: update to 1.8.0 release Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-26Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150218' into ↵Peter Maydell
staging Features for s390x/kvm 1. guest reIPL changes (Fan Zhang) Implements subcode 5 and 6 of diag 0x308. This allows to use /sys/firmware/[re]ipl/ccw/* and the chreipl and lsreipl tools in Linux. In addition to the normal "change the disk" this also allows to switch from booting an external kernel into rebooting from a disk. 2. Memory page table walking (Thomas Huth) Fix several page table walking functions, used in several places like gdb server and instruction handling. Also use these functions in several I/O related functions. # gpg: Signature made Wed Feb 18 09:13:22 2015 GMT using RSA key ID B5A61C7C # gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" * remotes/borntraeger/tags/s390x-20150218: (29 commits) s390x/helper: Remove s390_cpu_physical_memory_map s390x/pci: Rework memory access in zpci instruction s390x/ioinst: Rework memory access in TPI instruction s390x/ioinst: Rework memory access in CHSC instruction s390x/ioinst: Rework memory access in STCRW instruction s390x/ioinst: Rework memory access in TSCH instruction s390x/ioinst: Set condition code in ioinst_handle_tsch() handler s390x/ioinst: Rework memory access in STSCH instruction s390x/ioinst: Rework memory access in SSCH instruction s390x/ioinst: Rework memory access in MSCH instruction s390x/css: Make schib parameter of css_do_msch const s390x/mmu: Add function for accessing guest memory s390x/kvm: Add function for injecting pgm access exceptions s390x/mmu: Clean up mmu_translate_asc() s390x/mmu: Check bit 52 in page table entry s390x/mmu: Renaming related to the ASCE confusion s390x/mmu: Add support for read-only regions s390x/mmu: Fix the exception codes for illegal table entries s390x/mmu: Fix exception types when checking the ASCEs s390x/mmu: Fix translation exception code in lowcore ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-26Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-02-18' ↵Peter Maydell
into staging Clean up around error_get_pretty(), qerror_report_err() # gpg: Signature made Wed Feb 18 10:10:07 2015 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-error-2015-02-18: qemu-char: Avoid qerror_report_err() outside QMP command handlers qemu-img: Avoid qerror_report_err() outside QMP command handlers vl: Avoid qerror_report_err() outside QMP command handlers tpm: Avoid qerror_report_err() outside QMP command handlers numa: Avoid qerror_report_err() outside QMP command handlers net: Avoid qerror_report_err() outside QMP command handlers monitor: Avoid qerror_report_err() outside QMP command handlers monitor: Clean up around monitor_handle_fd_param() error: Use error_report_err() where appropriate error: New convenience function error_report_err() vhost-scsi: Improve error reporting for invalid vhostfd Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-25target-i386: Move APIC ID compatibility code to pc.cEduardo Habkost
The APIC ID compatibility code is required only for PC, and now that x86_cpu_initfn() doesn't use x86_cpu_apic_id_from_index() anymore, that code can be moved to pc.c. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-25target-i386: Require APIC ID to be explicitly set before CPU realizeEduardo Habkost
Instead of setting APIC ID automatically when creating a X86CPU, require the property to be set before realizing the object (which all callers of cpu_x86_create() already do). Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-25target-i386: Set APIC ID using cpu_index on CONFIG_USEREduardo Habkost
The PC CPU initialization code already sets apic-id based on the CPU topology, and CONFIG_USER doesn't need the topology-based APIC ID calculation code. Make CONFIG_USER set apic-id before realizing the CPU (just like PC already does), so we can simplify x86_cpu_initfn later. As there is no CPU topology configuration in CONFIG_USER, just use cpu_index as the APIC ID. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-25linux-user: Check for cpu_init() errorsEduardo Habkost
This was the only caller of cpu_init() that was not checking for NULL yet. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-25target-i386: Move CPUX86State.cpuid_apic_id to X86CPU.apic_idEduardo Habkost
The field doesn't need to be inside CPUState, and it is not specific for the CPUID instruction, so move and rename it. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-25target-i386: Simplify error handling on cpu_x86_init_user()Eduardo Habkost
Isolate error handling path from the "if (error)" checks. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-25target-i386: Eliminate cpu_init() functionEduardo Habkost
Instead of putting extra logic inside cpu.h, just do everything inside cpu_x86_init_user(). Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-25target-i386: Rename cpu_x86_init() to cpu_x86_init_user()Eduardo Habkost
The function is used only for CONFIG_USER, so make its purpose clear. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-25target-i386: Move topology.h to include/hw/i386Eduardo Habkost
This will allow the PC code to use the header, and lets us eliminate the QEMU_INCLUDES hack inside tests/Makefile. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-25target-i386: Eliminate unnecessary get_cpuid_vendor() functionEduardo Habkost
The function was used in only two places. In one of them, the function made the code less readable by requiring temporary te[bcd]x variables. In the other one we can simply inline the existing code. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-25target-i386: Simplify listflags() functionEduardo Habkost
listflags() had lots of unnecessary complexity. Instead of printing to a buffer that will be immediately printed, simply call the printing function directly. Also, remove the fbits and flags arguments that were always set to the same value. Also, there's no need to list the flags in reverse order. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-25Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2015-02-18' ↵Peter Maydell
into staging hmp: Normalize HMP command handler names # gpg: Signature made Wed Feb 18 10:59:44 2015 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-monitor-2015-02-18: hmp: Name HMP info handler functions hmp_info_SUBCOMMAND() hmp: Name HMP command handler functions hmp_COMMAND() hmp: Clean up declarations for long-gone info handlers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-25Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20150218-1' into ↵Peter Maydell
staging usb: error handling fixes from Markus, make sysbus ehci arm-only. # gpg: Signature made Wed Feb 18 09:54:13 2015 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-usb-20150218-1: Make sysbus EHCI devices ARM only by default PPC: Don't use legacy -usbdevice support for setting up board r2d: Don't use legacy -usbdevice support for setting up board usb: Change usb_create_simple() to abort on failure usb: Suppress bogus error when automatic usb-hub creation fails usb: Do not prefix error_setg() messages with "Error: " usb: Improve -usbdevice error reporting a bit usb: usb_create() can't fail, drop useless error handling Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-25Merge remote-tracking branch ↵Peter Maydell
'remotes/mdroth/tags/qga-pull-2015-02-16-v2-tag' into staging tag for qga-pull-2015-02-16-v2 v2: * generalized QAPI function definition for guest-memory-block-size to guest-memory-block-info for future extensibility (Eric) # gpg: Signature made Tue Feb 17 22:36:08 2015 GMT using RSA key ID F108B584 # gpg: Good signature from "Michael Roth <flukshun@gmail.com>" # gpg: aka "Michael Roth <mdroth@utexas.edu>" # gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: CEAC C9E1 5534 EBAB B82D 3FA0 3353 C9CE F108 B584 * remotes/mdroth/tags/qga-pull-2015-02-16-v2-tag: qemu-ga-win: Fail loudly on bare 'set-time' qga: add memory block command that unsupported qga: implement qmp_guest_get_memory_block_info() for Linux with sysfs qga: implement qmp_guest_set_memory_blocks() for Linux with sysfs qga: implement qmp_guest_get_memory_blocks() for Linux with sysfs qga: introduce three guest memory block commmands with stubs qga: implement file commands for Windows guest guest agent: guest-file-open: refactoring utils: drop strtok_r from envlist_parse qga: add guest-set-user-password command Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-24Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
- vhost-scsi: add bootindex property - RCU: fix MemoryRegion lifetime issues in PCI; document the rules; convert of AddressSpaceDispatch and RAMList - KVM: add kvm_exit reasons for aarch64 # gpg: Signature made Mon Feb 16 16:32:32 2015 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (21 commits) Convert ram_list to RCU exec: convert ram_list to QLIST cosmetic changes preparing for the following patches exec: protect mru_block with RCU rcu: add g_free_rcu rcu: introduce RCU-enabled QLIST exec: RCUify AddressSpaceDispatch exec: make iotlb RCU-friendly exec: introduce cpu_reload_memory_map docs: clarify memory region lifecycle pci: split shpc_cleanup and shpc_free pcie: remove mmconfig memory leak and wrap mmconfig update with transaction memory: keep the owner of the AddressSpace alive until do_address_space_destroy rcu: run RCU callbacks under the BQL rcu: do not let RCU callbacks pile up indefinitely vhost-scsi: set the bootable value of channel/target/lun vhost-scsi: add a property for booting vhost-scsi: expose the TYPE_FW_PATH_PROVIDER interface vhost-scsi: add bootindex property qdev: support to get a device firmware path directly ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-24Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Pull request v2: * Fix C11 typedef redefinitions in ahci and libqos malloc [Peter] * Fix lx -> PRIx64 format specifiers in ahci [Peter] # gpg: Signature made Mon Feb 16 15:45:53 2015 GMT using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: (65 commits) block: Keep bdrv_check*_request()'s return value block: Remove "growable" from BDS block: Clamp BlockBackend requests qemu-io: Use BlockBackend qemu-io: Remove "growable" option qemu-io: Use blk_new_open() in openfile() qemu-nbd: Use blk_new_open() in main() qemu-img: Use BlockBackend as far as possible qemu-img: Use blk_new_open() in img_rebase() qemu-img: Use blk_new_open() in img_open() block/xen: Use blk_new_open() in blk_connect() blockdev: Use blk_new_open() in blockdev_init() iotests: Add test for driver=qcow2, format=qcow2 block: Add Error parameter to bdrv_find_protocol() block: Add blk_new_open() block: Lift some BDS functions to the BlockBackend iotests: Add test for qemu-img convert to NBD qemu-img: Fix qemu-img convert -n qemu-iotests: Add 093 for IO throttling qemu-iotests: Allow caller to disable underscore convertion for qmp ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-24Merge remote-tracking branch 'remotes/kraxel/tags/pull-vnc-20150216-1' into ↵Peter Maydell
staging vnc: fixup some QemuOpts conversion fallout. # gpg: Signature made Mon Feb 16 08:13:32 2015 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-vnc-20150216-1: vnc: fix coverity warning ui/vnc: optimize full scanline updates vnc: auto assian an id when calling change vnc qmp interface vnc: introduce an wrapper for auto assign vnc id vnc: using bool type instead of int for QEMU_OPT_BOOL vnc: correct missing property about vnc_display vnc: fix qemu crash when not configure vnc option Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-24Merge remote-tracking branch 'remotes/lalrae/tags/mips-20150213-2' into stagingPeter Maydell
MIPS patches 2015-02-13 Changes: * bug fixes, cleanups and minor improvements # gpg: Signature made Sat Feb 14 17:01:37 2015 GMT using RSA key ID 0B29DA6B # gpg: Can't check signature: public key not found * remotes/lalrae/tags/mips-20150213-2: linux-user: correct stat structure in MIPS N32 target-mips: pass 0 instead of -1 as rs in microMIPS LUI instruction target-mips: fix broken snapshotting target-mips: use CP0EnLo_XI instead of magic number target-mips: ll and lld cause AdEL exception for unaligned address target-mips: fix detection of the end of the page during translation target-mips: Make CP0.Status.CU1 read-only for the 5Kc and 5KEc processors isa: remove isa_mem_base variable gt64xxx: remove isa_mem_base usage piix4: use PCI address space instead of system memory mips: remove isa_mem_base usage jazz: remove usage of isa_mem_base jazz: do not explode QEMUMachineInitArgs structure isa: add memory space parameter to isa_bus_new Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-24parallel: parallel_hds_isa_init() shouldn't failMarkus Armbruster
It shouldn't fail, and no caller checks for failure. Make failure fatal. Maintainers of affected machines cc'ed. Cc: Anthony Liguori <aliguori@amazon.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-02-24parallel: Factor out common parallel_hds_isa_init()Markus Armbruster
Maintainers of affected machines cc'ed. Cc: Anthony Liguori <aliguori@amazon.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-02-24serial: serial_hds_isa_init() shouldn't failMarkus Armbruster
It shouldn't fail, and no caller checks for failure. Make failure fatal. Maintainers of affected machines cc'ed. Cc: Richard Henderson <rth@twiddle.net> Cc: Anthony Liguori <aliguori@amazon.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-02-24serial: Factor out common serial_hds_isa_init()Markus Armbruster
It's the same old loop copied five times, plus another instance where it's clipped to two iterations and unrolled. No external users of serial_isa_init() are left, so give it internal linkage. Maintainers of affected machines cc'ed. Cc: Richard Henderson <rth@twiddle.net> Cc: Anthony Liguori <aliguori@amazon.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-02-24etsec: Replace qdev_init() by qdev_init_nofail()Markus Armbruster
etsec_create() is a helper to create and realize the eTSEC. It's currently unused. Similar helpers for other NICs use qdev_init_nofail(). Match that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-02-24leon3: Replace unchecked qdev_init() by qdev_init_nofail()Markus Armbruster
grlib_irqmp_create(), grlib_gptimer_create() and grlib_apbuart_create() are helpers to create and realize GRLIB devices. Their only caller leon3_generic_hw_init() doesn't check for failure. Only the first can actually fail, and only when the caller fails to set up a pointer property, which is a programming error. Replace qdev_init() by qdev_init_nofail(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-02-24ide/isa: Replace unchecked qdev_init() by qdev_init_nofail()Markus Armbruster
isa_ide_init()'s callers don't check for failure. isa_ide_init() looks like it could fail, but since isa_ide_realizefn() can't fail, it actually can't. Replace its qdev_init() by qdev_init_nofail() to make it obvious. Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-02-23numa: Rename set_numa_modes() to numa_post_machine_init()Eduardo Habkost
This function does some initialization that needs to be done after machine init. The function may be eventually removed if we move the CPUState.numa_node initialization to the CPU init code, but while the function exists, lets give it a name that makes sense. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-23numa: Rename option parsing functionsEduardo Habkost
Renaming set_numa_nodes() and numa_init_func() to parse_numa_opts() and parse_numa() makes the purpose of those functions clearer. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-23numa: Move QemuOpts parsing to set_numa_nodes()Eduardo Habkost
This allows us to make numa_init_func() static. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-23numa: Make max_numa_nodeid staticEduardo Habkost
Now the only code that uses the variable is inside numa.c. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-23numa: Move NUMA globals to numa.cEduardo Habkost
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-23vl.c: Remove unnecessary zero-initialization of NUMA globalsEduardo Habkost
There's no need to zero-initialize globals, they are automatically initialized to zero. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-23numa: Move NUMA declarations from sysemu.h to numa.hEduardo Habkost
Not all sysemu.h users need the NUMA declarations, and keeping them in a separate file makes it easier to see what are the interfaces provided by numa.c. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-23qapi-types: add C99 index names to arraysMichael S. Tsirkin
It's not easy to figure out how monitor translates strings: most QEMU code deals with translated indexes, these are translated using _lookup arrays, so you need to find the array name, and find the appropriate offset. This patch adds C99 indexes to lookup arrays, which makes it possible to find the correct key using simple grep, and see that the matching is correct at a glance. Example: Before: const char *MigrationCapability_lookup[] = { "xbzrle", "rdma-pin-all", "auto-converge", "zero-blocks", NULL, }; After: const char *MigrationCapability_lookup[] = { [MIGRATION_CAPABILITY_XBZRLE] = "xbzrle", [MIGRATION_CAPABILITY_RDMA_PIN_ALL] = "rdma-pin-all", [MIGRATION_CAPABILITY_AUTO_CONVERGE] = "auto-converge", [MIGRATION_CAPABILITY_ZERO_BLOCKS] = "zero-blocks", [MIGRATION_CAPABILITY_MAX] = NULL, }; Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-02-23monitor: Fix missing err = NULL in client_migrate_info()Gonglei
When SPICE isn't used, we either fail an assertion in error_set(), or leak an error object. Broken in commit b25d81b. Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-02-23balloon: Fix typoEric Blake
Commit 422e0501 introduced a typo (unless removing an 'o' from balloon is how you deflate it?) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-13 00:51:13 +0000