aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-05-05get_maintainer: it's '--pattern-depth', not '-pattern-depth'Brian Norris
Though it appears that Perl's GetOptions will take either, the latter is not documented in the options listing. Cherry picked from Linux commit cc7ff0ef6eca3deeea4a424ca47a67c8450d5424. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05get_maintainer: Teach get_maintainer.pl about the new "R:" tagJoe Perches
We can now designate reviewers in the MAINTAINERS file with the new "R:" tag, so this commit teaches get_maintainers.pl to add their email addresses. Cherry picked from Linux commit c1c3f2c906e35bcb6e4cdf5b8e077660fead14fe, with fixes to avoid \C as in QEMU commit ba10f729f1 ("get_maintainer.pl: \C is deprecated", 2015-09-25). Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05MAINTAINERS: Add "R:" tag for self-appointed reviewersPaul E. McKenney
Some people are not content with the amount of mail they get, and would like to be CCed on patches for areas they do not maintain. Let them satisfy their own appetite for qemu-devel messages. Seriously: the purpose here is a bit different from the Linux kernel. While Linux uses "R" to designate non-maintainers for reviewing patches in a given area, in QEMU I would also like to use "R" so that people can delegate sending pull requests while keeping some degree of oversight. Based on Linux commit eafbaac3093760d1fd3b2a5b9f016362dd68af36. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05Fix the -accel parameter and the documentation for 'hax'Thomas Huth
Since 'hax' is a possible accelerator nowadays, too, the '-accel' option should support it and we should mention this accelerator in the documentation, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1493875481-16388-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05dump: Acquire BQL around vm_start() in dump threadFam Zheng
This fixes an assertion failure in the following backtrace: __GI___assert_fail memory_region_transaction_commit memory_region_add_eventfd virtio_pci_ioeventfd_assign virtio_bus_set_host_notifier virtio_blk_data_plane_start virtio_bus_start_ioeventfd virtio_vmstate_change vm_state_notify vm_prepare_start vm_start dump_cleanup dump_process dump_thread start_thread clone vm_start need BQL, acquire it if doing cleaning up from main thread. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170503072819.14462-1-famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05hax: Fix memory mapping de-duplication logicYu Ning
hax_update_mapping() avoids unnecessary and potentially expensive calls to HAX_VM_IOCTL_SET_RAM by computing the net result (i.e. effective mapping changes) of each MemoryRegion transaction, with the help of a linked list of HAXMapping objects. However, when processing a new mapping that overlaps with an existing mapping in the list, it fails to handle the case where the start address of the new mapping is above that of the existing mapping in the guest physical address space. This happens when QEMU is launched with "-machine q35 -enable-hax", which involves the following MemoryRegion transaction for digging the VGA hole: region_del: 0x00000000->0x08000000 VA 05fa0000 ('pc.ram') region_add: 0x00000000->0x000a0000 VA 05fa0000 ('pc.ram') region_add: 0x000a0000->0x000c0000 VA 00000000 ('vga-lowmem') region_add: 0x000c0000->0x08000000 VA 06060000 ('pc.ram') where the third MemoryRegion is MMIO and is ignored. The current de-duplication logic handles the last MemoryRegion incorrectly and produces the following result: hax_mapping_dump_list updates: + 0x000c0000->0x08000000 VA 0x06060000 - 0x07fe0000->0x08000000 VA 0x0df80000 which is why VGA emulation does not work for Q35. With this patch, one can see VGA output as Q35 boots up. Note that Q35 support also requires a change to HAXM kernel module, which is not available in the current HAXM release (6.1.2). + Add a warning if the input MemoryRegion is a ROM device, which is not supported by HAXM kernel module at this time. Signed-off-by: Yu Ning <yu.ning@linux.intel.com> Message-Id: <20170428072723.7036-1-yu.ning@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05checkpatch: Disallow glib asserts in main codeDr. David Alan Gilbert
Glib commit a6a875068779 (from 2013) made many of the glib assert macros non-fatal if a flag is set. This causes two problems: a) Compilers moan that your code is unsafe even though you've put an assert in before the point of use. b) Someone evil could, in a library, call g_test_set_nonfatal_assertions() and cause our assertions in important places not to fail and potentially allow memory overruns. Ban most of the glib assertion functions (basically everything except g_assert and g_assert_not_reached) except in tests/ This makes checkpatch gives an error such as: ERROR: Use g_assert or g_assert_not_reached #77: FILE: vl.c:4725: + g_assert_cmpstr("Chocolate", >, "Cheese"); Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170427165526.19836-1-dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05trace: add qemu mutex lock and unlock trace eventsJose Ricardo Ziviani
These trace events were very useful to help me to understand and find a reordering issue in vfio, for example: qemu_mutex_lock locked mutex 0x10905ad8 vfio_region_write (0001:03:00.0:region1+0xc0, 0x2020c, 4) qemu_mutex_unlock unlocked mutex 0x10905ad8 qemu_mutex_lock locked mutex 0x10905ad8 vfio_region_write (0001:03:00.0:region1+0xc4, 0xa0000, 4) qemu_mutex_unlock unlocked mutex 0x10905ad8 that also helped me to see the desired result after the fix: qemu_mutex_lock locked mutex 0x10905ad8 vfio_region_write (0001:03:00.0:region1+0xc0, 0x2000c, 4) vfio_region_write (0001:03:00.0:region1+0xc4, 0xb0000, 4) qemu_mutex_unlock unlocked mutex 0x10905ad8 So it could be a good idea to have these traces implemented. It's worth mentioning that they should be surgically enabled during the debugging, otherwise it can flood the trace logs with lock/unlock messages. How to use it: trace-event qemu_mutex_lock on|off trace-event qemu_mutex_unlock on|off or trace-event qemu_mutex* on|off Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com> Message-Id: <1493054398-26013-1-git-send-email-joserz@linux.vnet.ibm.com> Reviewed-by: Fam Zheng <famz@redhat.com> [Also handle trylock, cond_wait and win32; trace "unlocked" while still in the critical section, so that "unlocked" always comes before the next "locked" tracepoint. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05vmw_pvscsi: check message ring page count at initialisationP J P
A guest could set the message ring page count to zero, resulting in infinite loop. Add check to avoid it. Reported-by: YY Z <bigbird475958471@gmail.com> Signed-off-by: P J P <ppandit@redhat.com> Message-Id: <20170425130623.3649-1-ppandit@redhat.com> Reviewed-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05sgabios: update for "fix wrong video attrs for int 10h,ah==13h"Paolo Bonzini
Update the submodule and rebuild the binary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05scsi: avoid an off-by-one error in megasas_mmio_writePrasad J Pandit
While reading magic sequence(MFI_SEQ) in megasas_mmio_write, an off-by-one error could occur as 's->adp_reset' index is not reset after reading the last sequence. Reported-by: YY Z <bigbird475958471@gmail.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Message-Id: <20170424120634.12268-1-ppandit@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05vl: deprecate the "-hdachs" optionThomas Huth
If the user needs to specify the disk geometry, the corresponding parameters of the "-device ide-hd" option should be used instead. "-hdachs" is considered as deprecated and might be removed soon. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1493270454-1448-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05use _Static_assert in QEMU_BUILD_BUG_ONAndreas Grapentin
QEMU_BUILD_BUG_ON should use C11's _Static_assert, if the compiler supports it, to provide more readable messages on failure. We check for _Static_assert in configure, and set CONFIG_STATIC_ASSERT accordingly. QEMU_BUILD_BUG_ON invokes _Static_assert if CONFIG_STATIC_ASSERT is defined, and reverts to the old way otherwise. That way, systems without C11 conforming compiler will still have the old messages, as verified by intentionally breaking the configure check. the following example output was generated by inverting the condition in QEMU_BUILD_BUG_ON: without _Static_assert: > In file included from /qemu/include/qemu/osdep.h:36:0, > from /qemu/qga/commands.c:13: > /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’: > /qemu/include/qemu/compiler.h:89:12: error: negative width in bit-field ‘<anonymous>’ > struct { \ > ^ > /qemu/include/qemu/compiler.h:96:38: note: in expansion of macro QEMU_BUILD_BUG_ON_STRUCT’ > #define QEMU_BUILD_BUG_ON(x) typedef QEMU_BUILD_BUG_ON_STRUCT(x) \ > ^~~~~~~~~~~~~~~~~~~~~~~~ > /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’ > QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *)); \ > ^~~~~~~~~~~~~~~~~ > /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’ > atomic_load_acquire(ptr) > ^~~~~~~~~~~~~~~~~~~ > /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’ > bool finished = atomic_mb_read(&gei->finished); > ^~~~~~~~~~~~~~ with _Static_assert: > In file included from /qemu/include/qemu/osdep.h:36:0, > from /qemu/qga/commands.c:13: > /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’: > /qemu/include/qemu/compiler.h:94:30: error: static assertion failed: "not expecting: sizeof(*&gei->finished) > sizeof(void *)" > #define QEMU_BUILD_BUG_ON(x) _Static_assert((x), #x) > ^ > /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’ > QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *)); \ > ^~~~~~~~~~~~~~~~~ > /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’ > atomic_load_acquire(ptr) > ^~~~~~~~~~~~~~~~~~~ > /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’ > bool finished = atomic_mb_read(&gei->finished); > ^~~~~~~~~~~~~~ Signed-off-by: Andreas Grapentin <andreas@grapentin.org> Message-Id: <20170314165953.18506-1-andreas@grapentin.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05target/i386: Add GDB XML register description supportAbdallah Bouassida
This patch implements XML target description support for X86 and X86-64 architectures in the GDB stub, as the way with ARM and PowerPC: - gdb-xml/32bit-core.xml & gdb-xml/64bit-core.xml: Adding the XML target description files, these files are picked from GDB source code. - configure: Define gdb_xml_files for X86 targets. - target/i386/cpu.c: Define gdb_core_xml_file and gdb_arch_name to add XML awareness for this architecture, modify the gdb_num_core_regs to fit the registers number defined in each XML file. Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com> Message-Id: <2b3c8119-1602-28c7-eab4-296593877103@lauterbach.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-03char: Fix removing wrong GSource that be found by fd_in_tagzhanghailiang
We use fd_in_tag to find a GSource, fd_in_tag is return value of g_source_attach(GSource *source, GMainContext *context), the return value is unique only in the same context, so we may get the same values with different 'context' parameters. It is no problem to find the right fd_in_tag by using g_main_context_find_source_by_id(GMainContext *context, guint source_id) while there is only one default main context. But colo-compare tries to create/use its own context, and if we pass wrong 'context' parameter with right fd_in_tag, we will find a wrong GSource to handle. We tried to fix the related codes in commit b43decb015a6efeb9e3cdbdb80f6547ad7248a4c, but it didn't fix the bug completely, because we still have some codes didn't pass *right* context parameter for remove_fd_in_watch(). Let's fix it by record the GSource directly instead of fd_in_tag. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1492564532-91680-1-git-send-email-zhang.zhanghailiang@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-03hw/i386: Build-time assertion on pc/q35 reset register being identical.Phil Dennis-Jordan
This adds a clarifying comment and build time assert to the FADT reset register field initialisation: the reset register is the same on both machine types. Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu> Message-Id: <1489558827-28971-3-git-send-email-phil@philjordan.eu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-03hw/i386: Use Rev3 FADT (ACPI 2.0) instead of Rev1 to improve guest OS support.Phil Dennis-Jordan
This updates the FADT generated for x86/64 machine types from Revision 1 to 3. (Based on ACPI standard 2.0 instead of 1.0) The intention is to expose the reset register information to guest operating systems which require it, specifically OS X/macOS. Revision 1 FADTs do not contain the fields relating to the reset register. The new layout and contents remains backwards-compatible with operating systems which only support ACPI 1.0, as the existing fields are not modified by this change, as the 64-bit and 32-bit variants are allowed to co-exist according to the ACPI 2.0 standard. No regressions became apparent in tests with a range of Windows (XP-10) and Linux versions. The BIOS tables test suite's FADT checksum test has also been updated to reflect the new FADT layout and content. Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu> Message-Id: <1489558827-28971-2-git-send-email-phil@philjordan.eu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-02Merge remote-tracking branch 'sthibault/tags/samuel-thibault' into stagingStefan Hajnoczi
slirp updates # gpg: Signature made Sat 29 Apr 2017 05:45:24 PM BST # gpg: using RSA key 0xB0A51BF58C9179C5 # gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>" # gpg: aka "Samuel Thibault <sthibault@debian.org>" # gpg: aka "Samuel Thibault <samuel.thibault@gnu.org>" # gpg: aka "Samuel Thibault <samuel.thibault@inria.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@labri.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" # gpg: aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>" # Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6 # Subkey fingerprint: AEBF 7448 FAB9 453A 4552 390E B0A5 1BF5 8C91 79C5 * sthibault/tags/samuel-thibault: slirp: VMStatify remaining except for loop slirp: VMStatify socket level slirp: Common lhost/fhost union slirp: VMStatify sbuf slirp: VMState conversion; tcpcb slirp: fix pinging the virtual ipv4 DNS server slirp: tftp, copy sockaddr_size slirp/smb: Replace constant strings by glib string slirp: allow host port 0 for hostfwd Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-04-29slirp: VMStatify remaining except for loopDr. David Alan Gilbert
This converts the remaining components, except for the top level loop, to VMState. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: VMStatify socket levelDr. David Alan Gilbert
Working up the stack, this replaces the slirp_socket_load/save with VMState definitions. A place holder for IPv6 support is added as a comment; it needs testing once the rest of the IPv6 code is there. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: Common lhost/fhost unionDr. David Alan Gilbert
The socket structure has a pair of unions for lhost and fhost addresses; the unions are identical so split them out into a separate union declaration. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: VMStatify sbufDr. David Alan Gilbert
Convert the sbuf structure to a VMStateDescription. Note this uses the VMSTATE_WITH_TMP mechanism to calculate and reload the offsets based on the pointers. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: VMState conversion; tcpcbDr. David Alan Gilbert
Convert the migration of the struct tcpcb to use a VMStateDescription, the rest of it will come later. Mostly mechanical, except for conversion of some 'char' to uint8_t to ensure portability. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: fix pinging the virtual ipv4 DNS serverSamuel Thibault
so that people do not think it is not working at least basically. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: tftp, copy sockaddr_sizeMarc-André Lureau
ASAN detects an "unknown-crash" when running pxe-test: /ppc64/pxe/spapr-vlan: ================================================================= ==7143==ERROR: AddressSanitizer: unknown-crash on address 0x7f6dcd298d30 at pc 0x55e22218830d bp 0x7f6dcd2989e0 sp 0x7f6dcd2989d0 READ of size 128 at 0x7f6dcd298d30 thread T2 #0 0x55e22218830c in tftp_session_allocate /home/elmarco/src/qq/slirp/tftp.c:73 #1 0x55e22218a1f8 in tftp_handle_rrq /home/elmarco/src/qq/slirp/tftp.c:289 #2 0x55e22218b54c in tftp_input /home/elmarco/src/qq/slirp/tftp.c:446 #3 0x55e2221833fe in udp6_input /home/elmarco/src/qq/slirp/udp6.c:82 #4 0x55e222137b17 in ip6_input /home/elmarco/src/qq/slirp/ip6_input.c:67 Address 0x7f6dcd298d30 is located in stack of thread T2 at offset 96 in frame #0 0x55e222182420 in udp6_input /home/elmarco/src/qq/slirp/udp6.c:13 This frame has 3 object(s): [32, 48) '<unknown>' [96, 124) 'lhost' <== Memory access at offset 96 partially overflows this variable [160, 200) 'save_ip' <== Memory access at offset 96 partially underflows this variable The sockaddr_storage pointer is the sockaddr_in6 lhost on the stack. Copy only the source addr size. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp/smb: Replace constant strings by glib stringDr. David Alan Gilbert
gcc 7 (on fedora 26) objects to many of the snprintf's in the smb path and command creation because it can't figure out that the smb_dir (i.e. the /tmp dir for the configuration) is known to be short. Replace all these fixed length buffers by g_str* functions that dynamically allocate and use g_dir_make_tmp to make the directory. (It's fairly new glib but we have a compat function for it). Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: allow host port 0 for hostfwdVincent Bernat
The OS will allocate automatically a free port. This is useful if you want to be sure to not get any port conflict. You still have to figure out which port you got, for example with "lsof" (this could be exposed in the monitor if needed). Example of use: $ qemu-system-x86_64 -net user,hostfwd=127.0.0.1:0-:22 ... Then, get your port with: $ lsof -np 1474 | grep LISTEN qemu-syst 31777 bernat 12u IPv4 [...] TCP 127.0.0.1:35145 (LISTEN) Signed-off-by: Vincent Bernat <vincent@bernat.im> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-28replication: Make --disable-replication compile againMarkus Armbruster
Broken in commit daa33c5. Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Message-id: 1493298053-17140-1-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-04-28configure: fix trace backend list for out-of-tree buildsGreg Kurz
Since commit "c53eeaf75a04 configure: eliminate Python dependency for --help", configure --help fails to produce the list of available trace backends if invoked out-of-tree. It also spits the following error: grep: scripts/tracetool/backend/*.py: No such file or directory This patch simply adds the missing $source_path to fix it. Signed-off-by: Greg Kurz <groug@kaod.org> Message-id: 149321376763.7874.12797658801011614451.stgit@bahia Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-04-28Merge remote-tracking branch 'mdroth/tags/qga-pull-2017-04-25-v2-tag' into ↵Stefan Hajnoczi
staging qemu-ga patch queue * new commands: guest-get-timezone, guest-get-users, guest-get-host-name * fix hang on w32 when stopping qemu-ga service while fs frozen * fix missing setting of can-offline in guest-get-vcpus * make qemu-ga VSS w32 service on-demand rather than on-startup * fix unecessary errors to EventLog on w32 * improvements to fsfreeze documentation v2: * document 'zone' field of guest-get-timezone as informational-only (Daniel, Eric) * fix build error for glib < 2.32 (Peter) # gpg: Signature made Thu 27 Apr 2017 06:43:42 AM BST # gpg: using RSA key 0x3353C9CEF108B584 # gpg: Good signature from "Michael Roth <flukshun@gmail.com>" # gpg: aka "Michael Roth <mdroth@utexas.edu>" # gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>" # Primary key fingerprint: CEAC C9E1 5534 EBAB B82D 3FA0 3353 C9CE F108 B584 * mdroth/tags/qga-pull-2017-04-25-v2-tag: qga: Add `guest-get-timezone` command qga: Add 'guest-get-users' command qga: improve fsfreeze documentations qga: Add 'guest-get-host-name' command qga-win: Fix Event Viewer errors caused by qemu-ga qga-win: Fix a bug where qemu-ga service is stuck during stop operation qga-win: Enable 'can-offline' field in 'guest-get-vcpus' reply qemu-ga: Make QGA VSS provider service run only when needed Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-04-27qga: Add `guest-get-timezone` commandVinzenz Feenstra
Adds a new command `guest-get-timezone` reporting the currently configured timezone on the system. The information on what timezone is currently is configured is useful in case of Windows VMs where the offset of the hardware clock is required to have the same offset. This can be used for management systems like `oVirt` to detect the timezone difference and warn administrators of the misconfiguration. Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com> Reviewed-by: Sameeh Jubran <sameeh@daynix.com> Tested-by: Sameeh Jubran <sameeh@daynix.com> * moved stub implementation to end of function for consistency * document that timezone names are for informational use only. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26qga: Add 'guest-get-users' commandVinzenz Feenstra
A command that will list all currently logged in users, and the time since when they are logged in. Examples: virsh # qemu-agent-command F25 '{ "execute": "guest-get-users" }' {"return":[{"login-time":1490622289.903835,"user":"root"}]} virsh # qemu-agent-command Win2k12r2 '{ "execute": "guest-get-users" }' {"return":[{"login-time":1490351044.670552,"domain":"LADIDA", "user":"Administrator"}]} Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com> * make g_hash_table_contains compat func inline to avoid unused warnings Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26qga: improve fsfreeze documentationsMarc-André Lureau
Some users find the fsfreeze behaviour confusing. Add some notes about invalid mount points and Windows usage. Related to: https://bugzilla.redhat.com/show_bug.cgi?id=1436976 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Vinzenz Feenstra <vfeenstr@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26qga: Add 'guest-get-host-name' commandVinzenz Feenstra
Retrieving the guest host name is a very useful feature for virtual management systems. This information can help to have more user friendly VM access details, instead of an IP there would be the host name. Also the host name reported can be used to have automated checks for valid SSL certificates. virsh # qemu-agent-command F25 '{ "execute": "guest-get-host-name" }' {"return":{"host-name":"F25.lab.evilissimo.net"}} Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com> * minor whitespace fix-ups Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26qga-win: Fix Event Viewer errors caused by qemu-gaSameeh Jubran
When the command "guest-fsfreeze-freeze" is executed it causes the VSS service to log the error below in the Event Viewer. This error is caused by an issue in the function "CommitSnapshots" in provider.cpp: * When VSS_TIMEOUT_MSEC expires the funtion returns E_ABORT. This causes the error #12293. |event id| error | * 12293 : Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider {00000000-0000-0000-0000-000000000000}. Routine details CommitSnapshots [hr = 0x80004004, Operation aborted. Signed-off-by: Sameeh Jubran <sameeh@daynix.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26qga-win: Fix a bug where qemu-ga service is stuck during stop operationSameeh Jubran
After triggering a freeze command without any following thaw command, qemu-ga will not respond to stop operation. This behaviour is wanted on Linux as there is no time limit for a freeze command and we want to prevent quitting in the middle of freeze, on the other hand on Windows the time limit for freeze is 10 seconds, so we should wait for the timeout, thaw the file system and quit. Signed-off-by: Sameeh Jubran <sameeh@daynix.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26qga-win: Enable 'can-offline' field in 'guest-get-vcpus' replySameeh Jubran
The QGA schema states: @can-offline: Whether offlining the VCPU is possible. This member is always filled in by the guest agent when the structure is returned, and always ignored on input (hence it can be omitted then). Currently 'can-offline' is missing entirely from the reply. This causes errors in libvirt which is expecting the reply to be compliant with the schema docs. BZ#1438735: https://bugzilla.redhat.com/show_bug.cgi?id=1438735 Signed-off-by: Sameeh Jubran <sameeh@daynix.com> Reviewed-by: Eric Blake <eblake@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26qemu-ga: Make QGA VSS provider service run only when neededSameeh Jubran
Currently the service runs in background on boot even though it is not needed and once it is running it never stops. The service needs to be running only during freeze operation and it should be stopped after executing thaw. Signed-off-by: Sameeh Jubran <sameeh@daynix.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20170426' into stagingPeter Maydell
Fix for exit_atomic tcg opcode paths # gpg: Signature made Wed 26 Apr 2017 18:27:11 BST # gpg: using RSA key 0xAD1270CC4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" # Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B * remotes/rth/tags/pull-tcg-20170426: tcg: Initialize return value after exit_atomic Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-26tcg: Initialize return value after exit_atomicRichard Henderson
Users of tcg_gen_atomic_cmpxchg and do_atomic_op rightfully utilize the output. Even though this code is dead, it gets translated, and without the initialization we encounter a tcg_error. Reported-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Tested-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-04-26Revert "COLO-compare: Optimize tcp compare trace event"Peter Maydell
This reverts commit 0fc8aec7de64f2bf83a274a2a38b938ce03425d2. In commit 2dfe5113b11 we split a trace event with a lot of arguments in two, because the UST trace backend has a limit on the number of arguments you can have in a single trace event. Unfortunately we subsequently forgot about this, and in commit 0fc8aec7de64f2 we merged the two trace events again, recreating the "UST backend doesn't build" bug. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-26Merge remote-tracking branch 'remotes/dgilbert/tags/pull-hmp-20170426' into ↵Peter Maydell
staging HMP pull, with tcg fix # gpg: Signature made Wed 26 Apr 2017 14:55:30 BST # gpg: using RSA key 0x0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-hmp-20170426: tests: Add a tester for HMP commands libqtest: Add a generic function to run a callback function for every machine libqtest: Ignore QMP events when parsing the response for HMP commands monitor: Check whether TCG is enabled before running the "info jit" code hmp: gpa2hva and gpa2hpa hostaddr command Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-26tests: Add a tester for HMP commandsThomas Huth
HMP commands do not get any automatic testing yet, so on certain QEMU machines, some HMP commands were causing crashes in the past. Thus we should test HMP commands in our test suite, too, to avoid that such problems creep in again in the future. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1493097407-20482-1-git-send-email-thuth@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-26libqtest: Add a generic function to run a callback function for every machineThomas Huth
Some tests need to run single tests for every available machine of the current QEMU binary. To avoid code duplication, let's extract this code that deals with 'query-machines' into a separate function. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1490860207-8302-3-git-send-email-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-26libqtest: Ignore QMP events when parsing the response for HMP commandsThomas Huth
When running certain HMP commands (like "device_del") via QMP, we can sometimes get a QMP event in the response first, so that the "g_assert(ret)" statement in qtest_hmp() triggers and the test fails. Fix this by ignoring such QMP events while looking for the real return value from QMP. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1490860207-8302-2-git-send-email-thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Added note to qtest_hmp/qtest_hmpv's header description to say it discards events
2017-04-26monitor: Check whether TCG is enabled before running the "info jit" codeThomas Huth
The "info jit" command currently aborts on Mac OS X with the message "qemu_mutex_lock: Invalid argument" when running with "-M accel=qtest". We should only call into the TCG code here if TCG has really been enabled and initialized. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1493179907-22516-1-git-send-email-thuth@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-26hmp: gpa2hva and gpa2hpa hostaddr commandPaolo Bonzini
These commands are useful when testing machine-check passthrough. gpa2hva is useful to inject a MADV_HWPOISON madvise from gdb, while gpa2hpa is useful to inject an error with the mce-inject kernel module. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1490021158-4469-1-git-send-email-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20170420133058.12911-1-pbonzini@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-26Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170426' ↵Peter Maydell
into staging ppc patch queue 2017-04-26 Here's a respind of my first pull request for qemu-2.10, consisting of assorted patches which have accumulated while qemu-2.9 stabilized. Highlights are: * Rework / cleanup of the XICS interrupt controller * Substantial improvement to the 'powernv' machine type - Includes an MMIO XICS version * POWER9 support improvements - POWER9 guests with KVM - Partial support for POWER9 guests with TCG * IOMMU and VFIO improvements * Assorted minor changes There are several IPMI patches here that aren't usually in my area of maintenance, but there isn't a regular maintainer and these patches are for the benefit of the powernv machine type. This pull request supersedes my 2017-04-26 pull request. This new set fixes a bug in one of the aforementioned IPMI patches which caused clang sanitizer failures (and may have crashed on some libc / host versions). # gpg: Signature made Wed 26 Apr 2017 07:58:10 BST # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.10-20170426: (48 commits) MAINTAINERS: Remove myself from e500 target/ppc: Style fixes e500,book3s: mfspr 259: Register mapped/aliased SPRG3 user read target/ppc: Flush TLB on write to PIDR spapr-cpu-core: Release ICPState object during CPU unrealization ppc/pnv: generate an OEM SEL event on shutdown ppc/pnv: add initial IPMI sensors for the BMC simulator ppc/pnv: populate device tree for IPMI BT devices ppc/pnv: populate device tree for serial devices ppc/pnv: populate device tree for RTC devices ppc/pnv: scan ISA bus to populate device tree ppc/pnv: enable only one LPC bus ppc/pnv: Add support for POWER8+ LPC Controller spapr: remove the 'nr_servers' field from the machine target/ppc: Fix size of struct PPCElfPrstatus ipmi: introduce an ipmi_bmc_gen_event() API ipmi: introduce an ipmi_bmc_sdr_find() API ipmi: provide support for FRUs ipmi: use a file to load SDRs ppc: add IPMI support ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-26Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20170421-v2-tag' ↵Peter Maydell
into staging Xen 2017/04/21 + fix # gpg: Signature made Tue 25 Apr 2017 19:10:37 BST # gpg: using RSA key 0x894F8F4870E1AE90 # gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" # gpg: aka "Stefano Stabellini <sstabellini@kernel.org>" # Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90 * remotes/sstabellini/tags/xen-20170421-v2-tag: (21 commits) move xen-mapcache.c to hw/i386/xen/ move xen-hvm.c to hw/i386/xen/ move xen-common.c to hw/xen/ add xen-9p-backend to MAINTAINERS under Xen xen/9pfs: build and register Xen 9pfs backend xen/9pfs: send responses back to the frontend xen/9pfs: implement in/out_iov_from_pdu and vmarshal/vunmarshal xen/9pfs: receive requests from the frontend xen/9pfs: connect to the frontend xen/9pfs: introduce Xen 9pfs backend 9p: introduce a type for the 9p header xen: import ring.h from xen configure: use pkg-config for obtaining xen version xen: additionally restrict xenforeignmemory operations xen: use libxendevice model to restrict operations xen: use 5 digit xen versions xen: use libxendevicemodel when available configure: detect presence of libxendevicemodel xen: create wrappers for all other uses of xc_hvm_XXX() functions xen: rename xen_modified_memory() to xen_hvm_modified_memory() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-26MAINTAINERS: Remove myself from e500Scott Wood
I recently left Freescale/NXP, and even before that it'd been a few years since I was actively involved in KVM/QEMU work. Signed-off-by: Scott Wood <oss@buserror.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-05 12:44:19 +0000