aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-12-03live migration: Propagate output monitor to callback handlerJan Kiszka
In order to allow proper progress reporting to the monitor that initiated the migration, forward the monitor reference through the migration layer down to SaveLiveStateHandler. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Report overall migration progressJan Kiszka
So far progress reporting only works for the first block device. Fix this by keeping an overall sum of sectors to be migratated, calculating the sum of all processed sectors, and finally basing the progress display on those values. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03live migration: Allow cleanup after cancellation or errorJan Kiszka
Introduce qemu_savevm_state_cancel and inject a stage -1 to cancel a live migration. This gives the involved subsystems a chance to clean up dynamically allocated resources. Namely, the block migration layer can now free its device descriptors and pending blocks. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03ram migration: Stop loading on errorJan Kiszka
Besides catching real errors, this also allows to interrrupt the qemu process during restore. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Add error handling/propagationJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Consolidate block transmissionJan Kiszka
Based on the original patch by Pierre Riteau: Use a common blk_send function to transmit a block. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Consolidate mig_read_device_bulk into mig_save_device_bulkJan Kiszka
Both functions share a lot of code, so make them one. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Clean up use of total_sectorsJan Kiszka
We already save total_sectors in BlkMigDevState, let's use this value during the migration and avoid to recalculate it needlessly. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Initialize remaining BlkMigState fieldsJan Kiszka
In case we restart a migration, submitted, read_done, transferred, and print_completion need to be reinitialized to 0. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Switch device and block lists to QSIMPLEQJan Kiszka
Based on the original patch by Pierre Riteau. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03Import a simple queue implementation from NetBSDPierre Riteau
Signed-off-by: Pierre Riteau <Pierre.Riteau@irisa.fr> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Drop dead codeJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Avoid indirection of block_mig_stateJan Kiszka
No need to push block_mig_state to the heap and, thus, establish an indirection. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Avoid large stack bufferJan Kiszka
Move a potentially large buffer from stack to heap. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Cleanup dirty tracking codeJan Kiszka
This switches the dirty bitmap to a true bitmap, reducing its footprint (specifically in caches). It moreover fixes off-by-one bugs in set_dirty_bitmap (nb_sectors+1 were marked) and bdrv_get_dirty (limit check allowed one sector behind end of drive). And is drops redundant dirty_tracking field from BlockDriverState. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Rework constants APIJan Kiszka
Instead of duplicating the definition of constants or introducing trivial retrieval functions move the SECTOR constants into the public block API. This also obsoletes sector_per_block in BlkMigState. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Fix coding style and whitespacesJan Kiszka
No functional changes. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03migration: Catch multiple start commandsJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03migration: Fix use of file after releaseJan Kiszka
qemu_fclose frees the passed file structure, but do_migrate_set_speed may access it later on. Fix it by setting file NULL in migrate_fd_cleanup and checking for this. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03savevm: Port to qdev.vmsd all devices that have qdevJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03qdev: enable vmstate_unregister() supportJuan Quintela
Now vmstate_unregister have the right type Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03pci: vmstate_register() already assign consecutive numbers starting at 0Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Add support for multiplying size for a constantJuan Quintela
When the size that we want to transmit is in another field, but in an unit different that bytes Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: remove usused VMSTATE_STRUCT_ARRAY_SIZE_UINT8Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Introduce UINT16_TEST supportJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Introduce VMSTATE_STRUCT_POINTER_TESTJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Introduce VMSTATE_STRUCT_TESTJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Add support for VBUFFERSJuan Quintela
Support for buffer that are pointed by a pointer (i.e. not embedded) where the size that we want to use is a field in the state. We also need a new place to store where to start in the middle of the buffer, as now it is a pointer, not the offset of the 1st field. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: fix missing ARRAY_OF_POINTERS support on save stateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Fix info field of VMSTATE_MACADDRJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Avoid seekingJan Kiszka
Seeking on vmstate save/load does not work if the underlying file is a stream. We could try to make all QEMUFile* forward-seek-aware, but first attempts in this direction indicated that it's saner to convert the few qemu_fseek-on-vmstates users to plain reads/writes. This fixes various subtle vmstate corruptions where unused fields were involved. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Implement IRQ on reselectionLaszlo Ast
The critical part of this change is how to deal with simultaneaous generation of interrupts. The only (normal) case when this happens in the emulation is near simultaneous reselection + selection. If selection comes first, there is no problem, since the target attempting reselection loses the arbitration (in the emulation it only means that the reselect function will not be started). In the worst case the host adapter is reselected, but the device driver already started a selection, so we jump to the alternative address to handle the situation. The SCRIPTS code can trigger another interrupt to notify the driver that the new task has to be postponed. I suppose that on real hardware there is enough time after the reselection interrupt to set the SIP bit before the next interrupt comes, so it would result in 2 stacked interrupts (a SCSI and a DMA one). However, in the emulation there is no interrupt stacking, so there is a good chance that the 2 interrupts will get to the interrupt handler at the same time. Nevertheless, it should not make a big difference in interrupt handling, since in both cases both interrupts have to be fetched first, and after that the new task (that failed during the selection phase) has to be prepared/reset for a later restart, and the reconnected device has to be serviced. The changes do not modify the host adapter's behavior if this interrupt is not enabled. See also LSI53C895A technical manual, SCID and SIEN0. Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Use alternative address when already reselectedLaszlo Ast
See SCRIPTS, 3.2.17 SELECT. Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Fix SDID in SELECT ID commandLaszlo Ast
See SCRIPTS Programming Guide, 3.2.17 SELECT. Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Fix message code of DISCONNECTLaszlo Ast
See SCSI-2, 6.5 Message system description/message codes. Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Add support for LSI53C700 Family Compatibility bitLaszlo Ast
Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Whitespace and typo fixesLaszlo Ast
Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: add read/write 16 commands.Gerd Hoffmann
Add READ_16 + friends to scsi-defs.h, scsi_command_name() and the request parsing helper functions. Use them in scsi-disk.c too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: VERIFYGerd Hoffmann
Move VERIFY emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: REPORT_LUNSGerd Hoffmann
Move REPORT_LUNS emulation from scsi_send_command() to scsi_disk_emulate_command(). Also add REPORT_LUNS to scsi-defs.h and scsi_command_name(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: SERVICE_ACTION_INGerd Hoffmann
Move SERVICE_ACTION_IN emulation from scsi_send_command() to scsi_disk_emulate_command(). Also add SERVICE_ACTION_IN to scsi-defs.h and scsi_command_name(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: GET_CONFIGURATIONGerd Hoffmann
Move GET_CONFIGURATION emulation from scsi_send_command() to scsi_disk_emulate_command(). Also add GET_CONFIGURATION to scsi-defs.h and scsi_command_name(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: READ_TOCGerd Hoffmann
Move READ_TOC emulation from scsi_send_command() to scsi_disk_emulate_command(). Add scsi_disk_emulate_read_toc() function which holds the longisch READ_TOC emulation code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: SYNCHRONIZE_CACHEGerd Hoffmann
Move SYNCHRONIZE_CACHE emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: READ_CAPACITYGerd Hoffmann
Move READ_CAPACITY emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: ALLOW_MEDIUM_REMOVALGerd Hoffmann
Move ALLOW_MEDIUM_REMOVAL emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: START_STOPGerd Hoffmann
Move START_STOP emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: MODE_SENSEGerd Hoffmann
Move MODE_SENSE emulation from scsi_send_command() to scsi_disk_emulate_command(). Create two helper functions: mode_sense_page() which writes the actual mode pages and scsi_disk_emulate_mode_sense() which holds the longish MODE_SENSE emulation code, calling into mode_sense_page() as needed. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: RESERVE+RELEASEGerd Hoffmann
Move RESERVE+RELEASE emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: INQUIRYGerd Hoffmann
Move INQUIRY emulation from scsi_send_command() to scsi_disk_emulate_command(). Also split the longish INQUITY emulation code into the new scsi_disk_emulate_inquiry() function. Serial number handling is slightly changed, we don't copy it any more but look it up directly in DriveInfo which we have at hand anyway. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-24 16:38:45 +0000