aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-09-09microblaze: Add support for fcmp.unEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2010-09-09elf: Calculate symbol size if neededStefan Weil
Symbols with a size of 0 are unusable for the disassembler. Example: While running an arm linux kernel, no symbolic names are used in qemu.log when the cpu is executing an assembler function. Assume that the size of such symbols is the difference to the next symbol value. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-09Fix OpenBSD build warningBlue Swirl
Fix this warning: CC savevm.o /src/qemu/savevm.c: In function `do_savevm': /src/qemu/savevm.c:1900: warning: passing arg 1 of `localtime_r' from incompatible pointer type It looks like on OpenBSD the type of tv_sec in struct timeval is still 'long' instead of time_t as in most other OS. Fix by adding a cast. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-09microblaze: User-mode emulation of hw-excp signalsEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2010-09-09microblaze: Add basic FPU emulationEdgar E. Iglesias
Missing: * fcmp.un insn * Denormalized exceptions * Exception model is not accurate Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2010-09-09microblaze: Add definitions for FSR reg fieldsEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2010-09-08Revert "Make default invocation of block drivers safer (v3)"Anthony Liguori
This reverts commit 79368c81bf8cf93864d7afc88b81b05d8f0a2c90. Conflicts: block.c I haven't been able to come up with a solution yet for the corruption caused by unaligned requests from the IDE disk so revert until a solution can be written. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-09-08Revert "PPC: Qdev'ify e500 pci"Anthony Liguori
This reverts commit 13b7fdeffa68e3382231a70308593ae6a75d96c3. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-09-08Revert "PPC: Make e500 pci byte swap config data"Anthony Liguori
This reverts commit cfb207e643d94e3e96d456b1df14c5e36f6aa9e5. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-09-08Merge remote branch 'agraf/ppc-next' into stagingAnthony Liguori
2010-09-08Merge remote branch 'kwolf/for-anthony' into stagingAnthony Liguori
2010-09-08Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori
2010-09-08virtio-9p: Change handling of flags in open() path for 9P2000.LSripathi Kodi
This patch applies on top of 9P2000.L patches that we have on the list. I took a look at how 9P server is handling open() flags in 9P2000.L path. I think we can do away with the valid_flags() function and simplify the code. The reasoning is as follows: O_NOCTTY: (If the file is a terminal, don't make it the controlling terminal of the process even though the process does not have a controlling terminal) By the time the control reaches 9P client it is clear that what we have is not a terminal device. Hence it does not matter what we do with this flag. In any case 9P server can filter this flag out before making the syscall. O_NONBLOCK: (Don't block if i) Can't read/write to the file ii) Can't get locks) This has an impact on FIFOs, but also on file locks. Hence we can pass it down to the system call. O_ASYNC: From the manpage: O_ASYNC Enable signal-driven I/O: generate a signal (SIGIO by default, but this can be changed via fcntl(2)) when input or output becomes pos- sible on this file descriptor. This feature is only available for terminals, pseudo-terminals, sockets, and (since Linux 2.6) pipes and FIFOs. See fcntl(2) for further details. Again, this does not make any impact on regular files handled by 9P. Also, we don't want 9P server to receive SIGIO. Hence I think 9P server can filter this flag out before making the syscall. O_CLOEXEC: This flag makes sense only on the client. If guest user space sets this flag the guest VFS will take care of calling close() on the fd if an exec() happens. Hence 9P client need not be bothered with this flag. Also I think QEMU will not do an exec, but if it does, it makes sense to close these fds. Hence we can pass this flag down to the syscall. O_CREAT: Since we are in open() path it means we have confirmed that the file exists. Hence there is no need to pass O_CREAT flag down to the system. In fact on some versions of glibc this causes problems, because we pass O_CREAT flag, but don't have permission bits. Hence we can just mask this flag out. So in summary: Mask out: O_NOCTTY O_ASYNC O_CREAT Pass-through: O_NONBLOCK O_CLOEXEC Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08[virtio-9p] This patch implements TLERROR/RLERROR on the qemu 9P server.Arun R Bharadwaj
Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08[virtio-9p] Remove all instances of unnecessary dotu variable.Arun R Bharadwaj
Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08virtio-9p: Add support for removing xattrAneesh Kumar K.V
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2010-09-08virtio-9p: Fix the memset usageAneesh Kumar K.V
The arguments are wrong. Use qemu_mallocz directly Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2010-09-08virtio-9p: Use lchown which won't follow symlinkAneesh Kumar K.V
We should always use functions which don't follow symlink on the server Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2010-09-08virtio-9p: Add SM_NONE security modelAneesh Kumar K.V
This is equivalent to SM_PASSTHROUGH security model. The only exception is, failure of privilige operation like chown are ignored. This makes a passthrough like security model usable for people who runs kvm as non root Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2010-09-08virtio-9p: Hide user.virtfs xattr in case of mapped security.Aneesh Kumar K.V
With mapped security mode we use "user.virtfs" namespace is used to store the virtFs related attributes. So hide it from user. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2010-09-08virtio-9p: Implement TXATTRCREATEAneesh Kumar K.V
TXATTRCREATE: Prepare a fid for setting xattr value on a file system object. size[4] TXATTRCREATE tag[2] fid[4] name[s] attr_size[8] flags[4] size[4] RXATTRWALK tag[2] txattrcreate gets a fid pointing to xattr. This fid can later be used to get set the xattr value. flag value is derived from set Linux setxattr. The manpage says "The flags parameter can be used to refine the semantics of the operation. XATTR_CREATE specifies a pure create, which fails if the named attribute exists already. XATTR_REPLACE specifies a pure replace operation, which fails if the named attribute does not already exist. By default (no flags), the extended attribute will be created if need be, or will simply replace the value if the attribute exists." The actual setxattr operation happens when the fid is clunked. At that point the written byte count and the attr_size specified in TXATTRCREATE should be same otherwise an error will be returned. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2010-09-08virtio-9p: Implement TXATTRWALKAneesh Kumar K.V
TXATTRWALK: Descend a ATTR namespace size[4] TXATTRWALK tag[2] fid[4] newfid[4] name[s] size[4] RXATTRWALK tag[2] size[8] txattrwalk gets a fid pointing to xattr. This fid can later be used to get read the xattr value. If name is NULL the fid returned can be used to get the list of extended attribute associated to the file system object. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2010-09-08virtio-9p: Add fidtype so that we can do type specific operationAneesh Kumar K.V
We want to add type specific operation during read/write Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2010-09-08[virtio-9p] qemu: virtio-9p: Implement LOPENM. Mohan Kumar
Implement 9p2000.L version of open(LOPEN) interface in qemu 9p server. For LOPEN, no need to convert the flags to and from 9p mode to VFS mode. Synopsis: size[4] Tlopen tag[2] fid[4] mode[4] size[4] Rlopen tag[2] qid[13] iounit[4] Current qemu 9p server does not support following flags: O_NOCTTY, O_NONBLOCK, O_ASYNC & O_CLOEXEC [Fix mode format - jvrao@linux.vnet.ibm.com] Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08rename - change name of file or directoryM. Mohan Kumar
size[4] Trename tag[2] fid[4] newdirfid[4] name[s] size[4] Rrename tag[2] Implement the 2000.L rename operation. A new function v9fs_complete_rename is introduced that acts as a common entry point for 2000.L rename operation and 2000.U rename opearation (via wstat). As part of this change the field 'nname' (used only for rename) is removed from the structure V9fsWstatState. Instead a new structure V9fsRenameState is used for rename operations both by 2000.U and 2000.L code paths. Both 2000.U and 2000.L rename code paths construct the V9fsRenameState structure and passes that to v9fs_complete_rename function. Changes from previous version: Use qemu_mallocz to initialize Use strcpy,strcat functions instead of memcpy Changed the variable name to newdirfid Introduced post rename function Error checking Removed nname field from V9fsWstatState Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08qemu: virtio-9p: Implement TMKDIRM. Mohan Kumar
Synopsis size[4] Tmkdir tag[2] fid[4] name[s] mode[4] gid[4] size[4] Rmkdir tag[2] qid[13] Description mkdir asks the file server to create a directory with given name, mode and gid. The qid for the new directory is returned with the mkdir reply message. Note: 72 is selected as the opcode for TMKDIR from the reserved list. Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> [jvrao@linux.vnet.ibm.com: Fix perm handling when creating directory] Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08qemu: virtio-9p: Implement TMKNODM. Mohan Kumar
Implement TMKNOD as part of 2000.L Work Synopsis size[4] Tmknod tag[2] fid[4] name[s] mode[4] major[4] minor[4] gid[4] size[4] Rmknod tag[2] qid[13] Description mknod asks the file server to create a device node with given device type, mode and gid. The qid for the new device node is returned with the mknod reply message. Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08[virtio-9p] This patch implements TLCREATE for 9p2000.L protocol.Venkateswararao Jujjuri (JV)
SYNOPSIS size[4] Tlcreate tag[2] fid[4] name[s] flags[4] mode[4] gid[4] size[4] Rlcreate tag[2] qid[13] iounit[4] DESCRIPTION The Tlreate request asks the file server to create a new regular file with the name supplied, in the directory (dir) represented by fid. The mode argument specifies the permissions to use. New file is created with the uid if the fid and with supplied gid. The flags argument represent Linux access mode flags with which the caller is requesting to open the file with. Protocol allows all the Linux access modes but it is upto the server to allow/disallow any of these acess modes. If the server doesn't support any of the access mode, it is expected to return error. To start with we will not restricit/limit any Linux flags on this server. If needed, We can start restricting as we move forward with various use cases. Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08[virtio-9p] Define and implement TSYMLINK for 9P2000.LVenkateswararao Jujjuri (JV)
This patch implements creating a symlink for TSYMLINK request and responds with RSYMLINK. In the case of error, we return RERROR. SYNOPSIS size[4] Tsymlink tag[2] fid[4] name[s] symtgt[s] gid[4] size[4] Rsymlink tag[2] qid[13] DESCRIPTION Create a symbolic link named 'name' pointing to 'symtgt'. gid represents the effective group id of the caller. The permissions of a symbolic link are irrelevant hence it is omitted from the protocol. Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08[virtio-9p] Implement TLINK for 9P2000.LVenkateswararao Jujjuri (JV)
Create a Hardlink. SYNOPSIS size[4] Tlink tag[2] dfid[4] oldfid[4] newpath[s] size[4] Rlink tag[2] DESCRIPTION Create a link 'newpath' in directory pointed by dfid linking to oldfid path. Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08virtio-9p: Implement server side of setattr for 9P2000.L protocol.Sripathi Kodi
SYNOPSIS size[4] Tsetattr tag[2] attr[n] size[4] Rsetattr tag[2] DESCRIPTION The setattr command changes some of the file status information. attr resembles the iattr structure used in Linux kernel. It specifies which status parameter is to be changed and to what value. It is laid out as follows: valid[4] specifies which status information is to be changed. Possible values are: ATTR_MODE (1 << 0) ATTR_UID (1 << 1) ATTR_GID (1 << 2) ATTR_SIZE (1 << 3) ATTR_ATIME (1 << 4) ATTR_MTIME (1 << 5) ATTR_CTIME (1 << 5) ATTR_ATIME_SET (1 << 7) ATTR_MTIME_SET (1 << 8) The last two bits represent whether the time information is being sent by the client's user space. In the absense of these bits the server always uses server's time. mode[4] File permission bits uid[4] Owner id of file gid[4] Group id of the file size[8] File size atime_sec[8] Time of last file access, seconds atime_nsec[8] Time of last file access, nanoseconds mtime_sec[8] Time of last file modification, seconds mtime_nsec[8] Time of last file modification, nanoseconds Explanation of the patches: -------------------------- *) The kernel just copies relevent contents of iattr structure to p9_iattr_dotl structure and passes it down to the client. The only check it has is calling inode_change_ok() *) The p9_iattr_dotl structure does not have ctime and ia_file parameters because I don't think these are needed in our case. The client user space can request updating just ctime by calling chown(fd, -1, -1). This is handled on server side without a need for putting ctime on the wire. *) The server currently supports changing mode, time, ownership and size of the file. *) 9P RFC says "Either all the changes in wstat request happen, or none of them does: if the request succeeds, all changes were made; if it fails, none were." I have not done anything to implement this specifically because I don't see a reason. [jvrao@linux.vnet.ibm.com: Parts of code for handling chown(-1,-1) Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08[virtio-9p] Make v9fs_do_utimensat accept timespec structures instead of v9stat.Sripathi Kodi
Currently v9fs_do_utimensat takes a V9fsStat argument and builds timespec structures. It sets tv_nsec values to 0 by default. Instead of this it should take struct timespec[2] and pass it down to the system directly. This will make it more generic and useful elsewhere. Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08virtio-9p: Do not reset atimeM. Mohan Kumar
Current code resets file's atime to 0 when there is a change in mtime. This results in resetting the atime to "1970-01-01 05:30:00". For example, truncate -s 0 filename results in changing the mtime to the truncate time, but resets the atime to "1970-01-01 05:30:00". utime system call does not have any provision to set only mtime or atime. So change v9fs_wstat_post_chmod function to use utimensat function to change the atime and mtime fields. If tv_nsec field is set to the special value "UTIME_OMIT", corresponding file time stamp is not updated. Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08virtio-9p: getattr server implementation for 9P2000.L protocol.Sripathi Kodi
SYNOPSIS size[4] Tgetattr tag[2] fid[4] request_mask[8] size[4] Rgetattr tag[2] lstat[n] DESCRIPTION The getattr transaction inquires about the file identified by fid. request_mask is a bit mask that specifies which fields of the stat structure is the client interested in. The reply will contain a machine-independent directory entry, laid out as follows: st_result_mask[8] Bit mask that indicates which fields in the stat structure have been populated by the server qid.type[1] the type of the file (directory, etc.), represented as a bit vector corresponding to the high 8 bits of the file's mode word. qid.vers[4] version number for given path qid.path[8] the file server's unique identification for the file st_mode[4] Permission and flags st_uid[4] User id of owner st_gid[4] Group ID of owner st_nlink[8] Number of hard links st_rdev[8] Device ID (if special file) st_size[8] Size, in bytes st_blksize[8] Block size for file system IO st_blocks[8] Number of file system blocks allocated st_atime_sec[8] Time of last access, seconds st_atime_nsec[8] Time of last access, nanoseconds st_mtime_sec[8] Time of last modification, seconds st_mtime_nsec[8] Time of last modification, nanoseconds st_ctime_sec[8] Time of last status change, seconds st_ctime_nsec[8] Time of last status change, nanoseconds st_btime_sec[8] Time of creation (birth) of file, seconds st_btime_nsec[8] Time of creation (birth) of file, nanoseconds st_gen[8] Inode generation st_data_version[8] Data version number request_mask and result_mask bit masks contain the following bits #define P9_STATS_MODE 0x00000001ULL #define P9_STATS_NLINK 0x00000002ULL #define P9_STATS_UID 0x00000004ULL #define P9_STATS_GID 0x00000008ULL #define P9_STATS_RDEV 0x00000010ULL #define P9_STATS_ATIME 0x00000020ULL #define P9_STATS_MTIME 0x00000040ULL #define P9_STATS_CTIME 0x00000080ULL #define P9_STATS_INO 0x00000100ULL #define P9_STATS_SIZE 0x00000200ULL #define P9_STATS_BLOCKS 0x00000400ULL #define P9_STATS_BTIME 0x00000800ULL #define P9_STATS_GEN 0x00001000ULL #define P9_STATS_DATA_VERSION 0x00002000ULL #define P9_STATS_BASIC 0x000007ffULL #define P9_STATS_ALL 0x00003fffULL This patch implements the client side of getattr implementation for 9P2000.L. It introduces a new structure p9_stat_dotl for getting Linux stat information along with QID. The data layout is similar to stat structure in Linux user space with the following major differences: inode (st_ino) is not part of data. Instead qid is. device (st_dev) is not part of data because this doesn't make sense on the client. All time variables are 64 bit wide on the wire. The kernel seems to use 32 bit variables for these variables. However, some of the architectures have used 64 bit variables and glibc exposes 64 bit variables to user space on some architectures. Hence to be on the safer side we have made these 64 bit in the protocol. Refer to the comments in include/asm-generic/stat.h There are some additional fields: st_btime_sec, st_btime_nsec, st_gen, st_data_version apart from the bitmask, st_result_mask. The bit mask is filled by the server to indicate which stat fields have been populated by the server. Currently there is no clean way for the server to obtain these additional fields, so it sends back just the basic fields. Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
2010-09-08virtio-9p: Compute iounit based on host filesystem block sizeM. Mohan Kumar
Compute iounit based on the host filesystem block size and pass it to client with open/create response. Also return iounit as statfs's f_bsize for optimal block size transfers. Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewd-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08[V4] virtio-9p: readdir implementation for 9p2000.LSripathi Kodi
This patch implements the server part of readdir() implementation for 9p2000.L SYNOPSIS size[4] Treaddir tag[2] fid[4] offset[8] count[4] size[4] Rreaddir tag[2] count[4] data[count] DESCRIPTION The readdir request asks the server to read the directory specified by 'fid' at an offset specified by 'offset' and return as many dirent structures as possible that fit into count bytes. Each dirent structure is laid out as follows. qid.type[1] the type of the file (directory, etc.), represented as a bit vector corresponding to the high 8 bits of the file's mode word. qid.vers[4] version number for given path qid.path[8] the file server's unique identification for the file offset[8] offset into the next dirent. type[1] type of this directory entry. name[256] name of this directory entry. Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Reviewed-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08virtio-9p: Return correct error from v9fs_removeSripathi Kodi
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> In v9fs_remove_post_remove() we currently ignore the error returned by the previous call to remove() and return an error only if freeing the fid fails. However, the client expects to see the error from remove(). Currently the client falsely thinks that the remove call has always succeeded. For example, doing rmdir on a non-empty directory does not return ENOTEMPTY. With this patch we ignore the error from free_fid(). The client cannot use this error value anyway. Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08qemu: virtio-9p: Implement statfs support in serverM. Mohan Kumar
Implement statfs support in qemu server based on Sripathi's initial statfs patch. Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08qemu: virtio-9p: Recognize 9P2000.L protocolM. Mohan Kumar
Make 9P server recognize 9P2000.L protocol version Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-09-08qcow2: Remove unnecessary flush after L2 writeKevin Wolf
When a new cluster was allocated, we only need a flush after the write to the L2 table if it was a COW and we need to decrease the refcounts of the old clusters. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-09-08block: Fix BDRV_O_CACHE_MASKKevin Wolf
BDRV_O_CACHE_MASK should have been extended when cache=unsafe introduced a new flag BDRV_O_NO_FLUSH. There are currently no users that would change their behaviour because of this, but let's clean it up before things break. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-09-08qemu-img convert: Use cache=unsafe for output imageKevin Wolf
If qemu-img crashes during the conversion, the user will throw away the broken output file anyway and start over. So no need to be too cautious. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-09-08raw-posix: improve detection of scsi-generic devicesBernhard Kohl
Allow symbolic links which point to /dev/sgX devices. Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-09-08scsi-disk: add some optional scsi commandsBernhard Kohl
I use a legacy OS which depends on some optional SCSI commands. In fact this implementation does nothing special, but provides minimum support for the following commands: REZERO UNIT WRITE AND VERIFY(10) WRITE AND VERIFY(12) WRITE AND VERIFY(16) MODE SELECT(6) MODE SELECT(10) SEEK(6) SEEK(10) Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-09-08Improve ATA IDENTIFY word 64 contents.Jonathan A. Kollasch
Fill in word 64 of IDENTIFY data to indicate support for PIO modes 3 and 4. This allows NetBSD guests to use UltraDMA modes instead of just PIO mode 0. Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-09-08raw-posix: Don't use file name for host_cdrom detection on LinuxKevin Wolf
On Linux, we have code to detect CD-ROMs using an ioctl. We shouldn't lose anything but false positives by removing the check for a /dev/cd* path. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-09-08qemu-io: Make alloc output useful when nb_sectors=1Stefan Hajnoczi
There is no indication whether or not the sector is allocated when nb_sectors=1: sector allocated at offset 64 KiB This message is produced whether or not the sector is allocated. Simply use the same message as the plural case, I don't think the English is so broken that we need special case output here: 0/1 sectors allocated at offset 64 KiB This change does not affect qemu-iotests since nb_sectors=1 is not used there. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-09-08scsi: fix and improve debug printsBernhard Kohl
Some of them are not compile clean. Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-09-08scsi-disk: fix the check of the DBD bit in the MODE SENSE commandBernhard Kohl
The DBD bit does not work as expected. SCSI-Spec: http://ldkelley.com/SCSI2/SCSI2/SCSI2-08.html#8.2.10 "A disable block descriptors (DBD) bit of zero indicates that the target may return zero or more block descriptors in the returned MODE SENSE data (see 8.3.3), at the target's discretion. A DBD bit of one specifies that the target shall not return any block descriptors in the returned MODE SENSE data." Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-09-08scsi-disk: return CHECK CONDITION for unknown page codes in the MODE SENSE ↵Bernhard Kohl
command SCSI-Spec: http://ldkelley.com/SCSI2/SCSI2/SCSI2-08.html#8.2.10 "An initiator may request any one or all of the supported mode pages from a target. If an initiator issues a MODE SENSE command with a page code value not implemented by the target, the target shall return CHECK CONDITION status and shall set the sense key to ILLEGAL REQUEST and the additional sense code to INVALID FIELD IN CDB." Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-24 22:34:46 +0000