aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-05-29hw/arm/virt: Record PCIe ranges in MemMapEntry arrayShannon Zhao
To generate ACPI table for PCIe controller, we need the base and size of the PCIe ranges. Record these ranges in MemMapEntry array, then we could share and use them for generating ACPI table. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 1432522520-8068-4-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29hw/arm/virt: Move common definitions to virt.hShannon Zhao
Move some common definitions to virt.h. These will be used by generating ACPI tables. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1432522520-8068-3-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29hw/acpi/aml-build: Make enum values to be upper case to match coding styleShannon Zhao
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 1432522520-8068-2-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29target-arm: Add WFx instruction trap supportGreg Bellows
Add support for trapping WFI and WFE instructions to the proper EL when SCTLR/SCR/HCR settings apply. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> [PMM: removed unnecessary tweaking of syn_wfx() prototype; use raise_exception(); don't trap on WFE (and add comment explaining why not); remove unnecessary ARM_FEATURE checks; trap to EL3, not EL1, if in S-EL0 and SCTLR check fires] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29target-arm: Don't halt on WFI unless we don't have any workPeter Maydell
Just NOP the WFI instruction if we have work to do. This doesn't make much difference currently (though it does avoid jumping out to the top level loop and immediately restarting), but the distinction between "halt" and "don't halt" will become more important when the decision to halt requires us to trap to a higher exception level instead. Suggested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29target-arm: Move TB flags down to fill gapPeter Maydell
Deleting the now-unused ARM_TBFLAG_CPACR_FPEN left a gap in the bit usage; move the following ARM_TBFLAG_XSCALE_CPAR and ARM_TBFLAG_NS_SHIFT down 3 bits to fill the gap. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29target-arm: Extend FP checks to use an ELGreg Bellows
Extend the ARM disassemble context to take a target exception EL instead of a boolean enable. This change reverses the polarity of the check making a value of 0 indicate floating point enabled (no exception). Signed-off-by: Greg Bellows <greg.bellows@linaro.org> [PMM: Use a common TB flag field for AArch32 and AArch64; CPTR_EL2 exists in v7; CPTR_EL2 should trap for EL2 accesses; CPTR_EL2 should not trap for secure accesses; CPTR_EL3 should trap for EL3 accesses; CPACR traps for secure accesses should trap to EL3 if EL3 is AArch32] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29target-arm: Make singlestate TB flags common between AArch32/64Peter Maydell
Currently we keep the TB flags PSTATE_SS and SS_ACTIVE in different bit positions for AArch64 and AArch32. Replace these separate definitions with a single common flag in the upper part of the flags word. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29target-arm: Add AArch64 CPTR registersGreg Bellows
Adds CPTR_EL2/3 system registers definitions and access function. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> [PMM: merge CPTR_EL2 and HCPTR definitions into a single def using STATE_BOTH; don't use readfn/writefn to implement RAZ/WI registers; don't use accessfn for the no-EL2 CPTR_EL2; fix cpacr_access logic to catch EL2 accesses to CPACR being trapped to EL3; use new CP_ACCESS_TRAP_EL[23] rather than setting exception.target_el directly] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29target-arm: Allow cp access functions to indicate traps to EL2 or EL3Peter Maydell
Some coprocessor access functions will need to indicate that the instruction should trap to EL2 or EL3 rather than the default target exception level; add corresponding CPAccessResult enum entries and handling code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29target-arm: Update interrupt handling to use target ELGreg Bellows
Updated the interrupt handling to utilize and report through the target EL exception field. This includes consolidating and cleaning up code where needed. Target EL is now calculated once in arm_cpu_exec_interrupt() and do_interrupt was updated to use the target_el exception field. The necessary code from arm_excp_target_el() was merged in where needed and the function removed. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1429722561-12651-4-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29target-arm: Make raise_exception() take syndrome and target ELPeter Maydell
Rather than making every caller of raise_exception set the syndrome and target EL by hand, make these arguments to raise_exception() and have that do the job. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29target-arm: Set exception target EL in tlb_fillPeter Maydell
Set the exception target EL for MMU faults in tlb_fill. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29target-arm: Move setting of exception info into tlb_fillPeter Maydell
Move the code which sets exception information out of arm_cpu_handle_mmu_fault and into tlb_fill. tlb_fill is the only caller which wants to raise_exception() so it makes more sense for it to handle the whole of the exception setup. As part of this cleanup, move the user-mode-only implementation function for the handle_mmu_fault CPU method into cpu.c so we don't need to make it globally visible, and rename the softmmu-only utility function arm_cpu_handle_mmu_fault to arm_tlb_fill so it's clear that it's not the same thing. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29target-arm: Set correct syndrome for faults on MSR DAIF*, immPeter Maydell
If the SCTLR.UMA trap bit is set then attempts by EL0 to update the PSTATE DAIF bits via "MSR DAIFSet, imm" and "MSR DAIFClr, imm" instructions will raise an exception. We were failing to set the syndrome information for this exception, which meant that it would be reported as a repeat of whatever the previous exception was. Set the correct syndrome information. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29target-arm: Extend helpers to route exceptionsGreg Bellows
Updated the various helper routines to set the target EL as needed using a dedicated function. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1429722561-12651-3-git-send-email-greg.bellows@linaro.org [PMM: Also set target_el in fault cases in access_check_cp_reg()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29target-arm: Add exception target el infrastructureGreg Bellows
Add a CPU state exception target EL field that will be used for communicating the EL to which an exception should be routed. Add a disassembly context field for tracking the EL3 architecture needed for determining the target exception EL. Add a target EL argument to the generic exception helper for callers to specify the EL to which the exception should be routed. Extended the helper to set the newly added CPU state exception target el. Added a function for setting the target exception EL and updated calls to helpers to call it. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1429722561-12651-2-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29Merge remote-tracking branch 'remotes/spice/tags/pull-spice-20150529-1' into ↵Peter Maydell
staging spice: misc fixes. # gpg: Signature made Fri May 29 09:16:29 2015 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/spice/tags/pull-spice-20150529-1: spice: fix spice_chr_add_watch() pre-condition spice: don't update mm_time when spice-server is stopped. spice-char: notify the server when chardev is writable virtio-console: notify chardev when writable Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29spice: fix spice_chr_add_watch() pre-conditionMarc-André Lureau
Since e02bc6de30c44fd668dc0d6e1cd1804f2eed3ed3, add_watch() is called with G_IO_HUP. Even if spice-qemu-char ignores this flag, the precondition must be changed. https://bugzilla.redhat.com/show_bug.cgi?id=1128992 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-05-29spice: don't update mm_time when spice-server is stopped.Gerd Hoffmann
Skip mm_time updates (in qxl device memory) in case the guest is stopped. Guest isn't able to look anyway, and it causes problems with migration. Also make sure the initial state for spice server is stopped. Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-05-29spice-char: notify the server when chardev is writableMarc-André Lureau
The spice server is polling on write, unless SPICE_CHAR_DEVICE_NOTIFY_WRITABLE flag is set. In this case, qemu must call spice_server_char_device_wakeup() when the frontend is writable. Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-05-29virtio-console: notify chardev when writableMarc-André Lureau
When the virtio serial is writable, notify the chardev backend with qemu_chr_accept_input(). Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-05-28Revert "gdbstub: Do not kill target in system emulation mode"Fabien Chouteau
The requirements described in this patch are implemented by "Add GDB qAttached support". This reverts commit 00e94dbc7fd0110b0555d59592b004333adfb4b8. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-28Add GDB qAttached supportJan Kiszka
With this patch QEMU handles qAttached request from gdb. When QEMU replies 1, GDB sends a "detach" command at the end of a debugging session otherwise GDB sends "kill". The default value for qAttached is 1 on system emulation and 0 on user emulation. Based on original version by Fabien Chouteau. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-28gdbstub: Introduce an is is_query_packet helperJan Kiszka
This helper supports parsing of query packets with optional extensions. The separator can be specified so that we can use it already for both qqemu.sstep[=] and qSupported[:feature]. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-28gdbstub: Fix qOffsets packet detectionJan Kiszka
qOffsets has no additional optional parameters. So match the complete string to avoid stumbling over possible future commands with identical prefix. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-28Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20150528' into stagingPeter Maydell
A set of patches add support for vector registers on s390x. Notable: Floating point registers and vector registers overlap, so extra care is needed so that we end up with a consistent state in all cases. # gpg: Signature made Thu May 28 09:37:27 2015 BST using RSA key ID C6F02FAF # gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>" # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" * remotes/cohuck/tags/s390x-20150528: s390x: Enable vector processing capability s390x: Migrate vector registers s390x: Add vector registers to ELF dump linux/elf.h update s390x: Add vector registers to HMP output s390x: gdb updates for vector registers gdb-xml: Include XML for s390 vector registers s390x: Store Additional Status SIGP order s390x: Vector Register IOCTLs s390x: Common access to floating point registers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-28Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Wed May 27 11:02:55 2015 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/net-pull-request: net/net: Record usage status of mac address tap: Improve -netdev/netdev_add/-net/... tap error reporting tap: Finish conversion of tap_open() to Error tap-solaris: Convert tap_open() to Error tap-bsd: Convert tap_open() to Error tap-linux: Convert tap_open() to Error tap: Permit incremental conversion of tap_open() to Error tap: Convert launch_script() to Error tap: Convert net_init_tap_one() to Error tap: Convert tap_set_sndbuf() to Error tap: Improve -netdev/netdev_add/-net/... bridge error reporting tap: net_tap_fd_init() can't fail, drop dead error handling net/dump: Improve -net/host_net_add dump error reporting net: Improve -net nic error reporting net: Permit incremental conversion of init functions to Error net: Improve error message for -net hubport a bit net: Change help text to list -netdev instead of -net by default Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-27s390x: Enable vector processing capabilityEric Farman
Everything is finally in place, inform the kernel that user space supports vector registers. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27s390x: Migrate vector registersEric Farman
When migrating a guest, be sure to include the vector registers. The vector registers are defined in a subsection, similar to the existing subsection for floating point registers. Since the floating point registers are always present (and thus migrated), we can skip them when performing the migration of the vector registers which may or may not be present. Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27s390x: Add vector registers to ELF dumpEric Farman
Create ELF notes for the vector registers where applicable, so that their contents can be examined by utilities such as crash or readelf. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27linux/elf.h updateEric Farman
Sync with kernel elf.h updates to get s390x vector register definitions. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27s390x: Add vector registers to HMP outputEric Farman
There are mechanisms to dump registers via the qemu HMP interface, such as the "info registers" command. Expand this output to dump the new vector registers. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27s390x: gdb updates for vector registersEric Farman
gdb allows registers to be displayed/modified, and is being updated to account for the new vector registers. Mirror these changes in the gdb stub in qemu so that this can be performed when gdb is attached to the qemu gdbserver. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27gdb-xml: Include XML for s390 vector registersEric Farman
Include the vector registers XML file that is provided by gdb, and can be used by the qemu gdbserver interface. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27s390x: Store Additional Status SIGP orderEric Farman
Add handling for the Store Additional Status at Address order that exists for the Signal Processor (SIGP) instruction. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27s390x: Vector Register IOCTLsEric Farman
Handle the actual syncing of the vector registers with kernel space, via the get/put register IOCTLs. The vector registers that were introduced with the z13 overlay the existing floating point registers. FP registers 0-15 are the high-halves of vector registers 0-15. Thus, remove the freg fields and replace them with the equivalent vector field to avoid errors in duplication. Moreover, synchronize either the vector registers via kvm_sync_regs, or floating point registers via the GET/SET FPU IOCTLs. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27s390x: Common access to floating point registersEric Farman
Provide a routine to access the correct floating point register, to simplify future expansion. Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27net/net: Record usage status of mac addressShannon Zhao
Currently QEMU dynamically generates mac address for the NIC which doesn't specify the mac address. But when we hotplug a NIC without specifying mac address, the mac address will increase for the same NIC along with hotplug and hot-unplug, and at last it will overflow. And if we codeplug one NIC with mac address e.g. "52:54:00:12:34:56", then hotplug one NIC without specifying mac address and the mac address of the hotplugged NIC is duplicate of "52:54:00:12:34:56". This patch add a mac_table to record the usage status and free the mac address when the NIC is unrealized. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Improve -netdev/netdev_add/-net/... tap error reportingMarkus Armbruster
When -netdev tap fails, it first reports a specific error, then a generic one, like this: $ qemu-system-x86_64 -netdev tap,id=foo qemu-system-x86_64: -netdev tap,id=foo: could not configure /dev/net/tun: Operation not permitted qemu-system-x86_64: -netdev tap,id=foo: Device 'tap' could not be initialized With the command line, the messages go to stderr. In HMP, they go to the monitor. In QMP, the second one becomes the error reply, and the first one goes to stderr. Convert net_init_tap() to Error. This suppresses the unwanted second message, and makes the specific error the QMP error reply. [Dropped duplicate "and" from error message as suggested by Eric Blake: "ifname=, script=, downscript=, and vnet_hdr=, " "queues=, and vhostfds= are invalid with helper=" --Stefan] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-16-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Finish conversion of tap_open() to ErrorMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-15-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap-solaris: Convert tap_open() to ErrorMarkus Armbruster
Fixes inappropriate use of syslog(). Not fixed: leaks on error paths, suspicious non-fatal errors. FIXMEs added instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-14-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap-bsd: Convert tap_open() to ErrorMarkus Armbruster
Fixes inappropriate use of stderr in monitor command handler. While there, improve some of the messages a bit. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-13-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap-linux: Convert tap_open() to ErrorMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-12-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Permit incremental conversion of tap_open() to ErrorMarkus Armbruster
Convert the trivial ones immediately: tap-aix and tap-haiku. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-11-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Convert launch_script() to ErrorMarkus Armbruster
Fixes inappropriate use of stderr in monitor command handler. While there, improve the messages some. [Fixed Error **err -> Error *err local variable that broke the build. --Stefan] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-10-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Convert net_init_tap_one() to ErrorMarkus Armbruster
[Dropped %s from "tap: open vhost char device failed: %s" since error_setg_errno() already prints a human-readable error string and there is no format string argument. --Stefan] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-9-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Convert tap_set_sndbuf() to ErrorMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-8-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Improve -netdev/netdev_add/-net/... bridge error reportingMarkus Armbruster
When -netdev bridge fails, it first reports a specific error, then a generic one, like this: $ qemu-system-x86_64 -netdev bridge,id=foo failed to launch bridge helper qemu-system-x86_64: -netdev bridge,id=foo: Device 'bridge' could not be initialized The first message goes to stderr. Wrong for HMP, because errors need to go to the monitor there. The second message goes to stderr for -netdev, to the monitor for HMP netdev_add, and becomes the error reply for QMP netdev_add. Convert net_bridge_run_helper() to Error, and propagate its errors through net_init_bridge(). This ensures the error gets reported where the user is, and suppresses the unwanted second message. While there, improve the error messages a bit. The above example becomes: $ qemu-system-x86_64 -netdev bridge,id=foo qemu-system-x86_64: -netdev bridge,id=foo: bridge helper failed net_init_tap() also uses net_bridge_run_helper(). Propagate its errors there as well. Improves reporting these errors with -netdev tap & friends. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-7-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: net_tap_fd_init() can't fail, drop dead error handlingMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-6-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-13 15:28:44 +0000