aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-06block/raw-posix: Implement bdrv_parse_filename()Max Reitz
The "file" protocol driver should strip the "file:" prefix from filenames if present. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-06block: Keep "filename" option after parsingMax Reitz
Currently, bdrv_file_open() always removes the "filename" option from the options QDict after bdrv_parse_filename() has been (successfully) called. However, for drivers with bdrv_needs_filename, it makes more sense for bdrv_parse_filename() to overwrite the "filename" option and for bdrv_file_open() to fetch the filename from there. Since there currently are no drivers that implement bdrv_parse_filename() and have bdrv_needs_filename set, this does not change current behavior. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-06block: mirror - remove code cruft that has no functionJeff Cody
Originally, this built up the error message with the backing filename, so that errp was set as follows: error_set(errp, QERR_OPEN_FILE_FAILED, backing_filename); However, we now propagate the local_error from the bdrv_open_backing_file() call instead, making these 2 lines useless code. Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-06block: make bdrv_swap rebuild the bs graph node list field.Benoît Canet
Moving only the node_name one field could lead to some inconsitencies where a node_name was defined on a bs which was not registered in the graph node list. bdrv_swap between a named node bs and a non named node bs would lead to this. bdrv_make_anon would then crash because it would try to remove the bs from the graph node list while it is not in it. This patch remove named node bses from the graph node list before doing the swap then insert them back. Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-05block: Fix bs->request_alignment assertion for bs->sg=1Kevin Wolf
For sg backends, bs->request_alignment is meaningless and may be 0. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-05iscsi: Use bs->sg for everything else than disksKevin Wolf
The current iscsi block driver code makes the rather arbitrary decision that TYPE_MEDIUM_CHANGER and TYPE_TAPE devices have bs->sg = 1 and all other device types are disks. Instead of this, check for TYPE_DISK to expose the disk interface and make everything else bs->sg = 1. In particular, this includes devices with TYPE_STORAGE_ARRAY, which is what LUN 0 of an iscsi target is. (See https://bugzilla.redhat.com/show_bug.cgi?id=1067784 for the exact scenario.) Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-05qemu-iotests: Test progress output for conversionKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-05qemu-img convert: Fix progress outputKevin Wolf
Initialise progress output only when the -p and -q options have already been parsed, otherwise it's always disabled. Reported-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-03-05gluster: Remove unused defines and header includeBharata B Rao
Remove the definitions of GLUSTER_FD_WRITE and GLUSTER_FD_READ which are no longer used. Also sockets.h isn't needed any more. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-05gluster: Change licence to GPLv2+Bharata B Rao
Pipe handling mechanism in gluster driver was based on similar implementation in RBD driver and hence had GPLv2 and associated copyright information. After changing gluster driver to coroutine based implementation, the pipe handling code no longer exists and hence change gluster driver's licence to GPLv2+ and remove RBD copyrights. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-05ui/sdl2 : initial port to SDL 2.0 (v2.0)Dave Airlie
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface. The biggest changes were in the input handling, where SDL2 has done a major overhaul, and I've had to include a generated translation file to get from SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard layout code works in qemu, so there may be further work if someone can point me a test case that works with SDL1.2 and doesn't with SDL2. Some SDL env vars we used to set are no longer used by SDL2, Windows, OSX support is untested, I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt using --with-sdlabi=2.0 to select the new code should be fine, like how gtk does it. v1.1: fix keys in text console v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor v2.0: merge the SDL multihead patch into this, g_new the number of consoles needed, wrap DCL inside per-console structure. Signed-off-by: Dave Airlie <airlied@redhat.com> Fixes & improvements by kraxel: * baum build fix * remove text console logic * adapt to new input core * codestyle fixups Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05console: add QemuUIInfoGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05console: add head to index to qemu consoles.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: remove index_from_keycode (no users)Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: move do_mouse_set to new coreGerd Hoffmann
This removes the last user of the lecagy input mouse handler list, so we can remove more legacy bits with this. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: move qmp_query_mice to new coreGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: add input_mouse_mode tracepointGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: move mouse mode notifier to new coreGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input-legacy: remove kbd_mouse_eventGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input-legacy: remove kbd_mouse_is_absoluteGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input-legacy: remove kbd_mouse_has_absoluteGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input-legacy: remove kbd_put_keycodeGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: trace eventsGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: mouse: switch cocoa ui to new coreGerd Hoffmann
Build fixes by Peter Maydell. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: keyboard: switch cocoa ui to new coreGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: mouse: switch monitor to new coreGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: mouse: switch spice ui to new coreGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: mouse: switch vnc ui to new coreGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: mouse: switch sdl ui to new coreGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: mouse: switch gtk ui to new coreGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: mouse: switch legacy handlers to new coreGerd Hoffmann
legacy mouse event handlers are registered in the new core, so they receive events submitted to the new input core. legacy kbd_mouse_event() continues to use the old code paths. So new-core event handlers wouldn't see events submitted via kbd_mouse_event. This leads to the constrain that we we must transition all kbd_mouse_event() users first to keep things working. But that is easier to handle than translating legacy mouse events into new-core mouse events ;) Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: mouse: add qemu_input_is_absolute()Gerd Hoffmann
Same as kbd_mouse_is_absolute(), but using new input core. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: mouse: add graphic_rotate supportGerd Hoffmann
Transform absolute mouse events according to graphic_rotate. Legacy input code does it for both absolute and relative events, but the logic is broken for relative coordinates, so this is most likely not used anyway. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: mouse: add helpers functions to coreGerd Hoffmann
Likewise a bunch of helper functions to manage mouse button and movement events, again to make life easier for the ui code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: keyboard: switch curses ui to new coreGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: keyboard: switch spice ui to new coreGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: keyboard: switch vnc ui to new coreGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: keyboard: switch sdl ui to new coreGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: keyboard: switch gtk ui to new coreGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: keyboard: switch qmp_send_key() to new core.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: keyboard: switch legacy handlers to new coreGerd Hoffmann
legacy kbd event handlers are registered in the new core, so they receive events from the new input core code. keycode -> scancode translation needed here. legacy kbd_put_keycode() sends events to the new core. scancode -> keycode translation needed here. So with this patch the new input core is fully functional for keyboard events. New + legacy interfaces can be mixed in any way. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: keyboard: add helper functions to coreGerd Hoffmann
A bunch of helper functions to manage keyboard events, to make life simpler for the ui code when submitting keyboard events. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: add core bits of the new input layerGerd Hoffmann
Register and unregister handlers. Event dispatcher code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: qapi: add pause keyGerd Hoffmann
It's missing. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-03-05input: qapi: add unmapped keyGerd Hoffmann
Simplifies building something -> QkeyCode mapping tables. Uninitialized entries can easily identified then. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-03-05input: qapi: define event typesGerd Hoffmann
Define input event types, using qapi. So we get nicely autogenerated types for our input events. And when it comes to qmp support some day things will be a lot easier. Types are modeled after the linux input layer. There are separate event types for each value. There is a sync to indicate the end of a event group. Mouse events are split into motion events (one for each axis) and button events, which are grouped by sync. Keyboard events are using the existing KeyValue type. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-03-05input: rename file to legacyGerd Hoffmann
Rename ui/input.c to ui/input-legacy.c. We are going to replace it step by step. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05console: export QemuConsole index,width,heightGerd Hoffmann
Add functions to query QemuConsole properties. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05s390x/virtio-ccw: Adapter interrupt support.Cornelia Huck
Handle the new CCW_CMD_SET_IND_ADAPTER command enabling adapter interrupts on guest request. When active, host->guest notifications will be handled via global_indicator -> queue indicators instead of queue indicators + subchannel I/O interrupt. Indicators for virtqueues may be present at an offset. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-03-05target-ppc: spapr: e500: fix to use cpu_dt_idAlexey Kardashevskiy
This makes use of @cpu_dt_id and related API in: 1. emulated XICS hypercall handlers as they receive fixed CPU indexes; 2. XICS-KVM to enable in-kernel XICS on right CPU; 3. device-tree renderer. This removes @cpu_index fixup as @cpu_dt_id is used instead so QEMU monitor can accept command-line CPU indexes again. This changes kvm_arch_vcpu_id() to use ppc_get_vcpu_dt_id() as at the moment KVM CPU id and device tree ID are calculated using the same algorithm. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Mike Day <ncmike@ncultra.org> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 11:43:52 +0000