aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-10linux-user: set minimum kernel version to 2.6.32Riku Voipio
Popular glibc based distributions[1] require minimum 2.6.32 as kernel version. For some targets 2.6.18 would be enough, but dropping so low would mean some suboptimal system calls could get used. Set the minimum kernel advertized to 2.6.32 for all architectures but aarch64 to ensure working qemu linux-user in case host kernel is older. [1] https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/921078 Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-03-10Merge remote-tracking branch ↵Peter Maydell
'remotes/juanquintela/tags/migration/20140308-1' into staging migration/next for 20140308 # gpg: Signature made Sat 08 Mar 2014 21:26:01 GMT using RSA key ID 5872D723 # gpg: Can't check signature: public key not found * remotes/juanquintela/tags/migration/20140308-1: migration: extend section_start/end traces vl: add system_wakeup_request tracepoint qemu_file: Fix mismerge of "use fwrite() correctly" XBZRLE: Fix qemu crash when resize the xbzrle cache Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-10ui/vnc: disable adaptive update calculations if not neededPeter Lieven
Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-10ui/vnc: optimize setting in vnc_dpy_update()Peter Lieven
Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-10ui/vnc: optimize clearing in find_and_clear_dirty_height()Peter Lieven
The following artifical test (just the bitmap operation part) running vnc_update_client 65536 times on a 2560x2048 surface illustrates the performance difference: All bits clean - vnc_update_client_new: 0.07 secs vnc_update_client_new2: 0.07 secs vnc_update_client_old: 10.98 secs All bits dirty - vnc_update_client_new: 11.26 secs - vnc_update_client_new2: 0.29 secs vnc_update_client_old: 20.19 secs Few bits dirty - vnc_update_client_new: 0.07 secs - vnc_update_client_new2: 0.07 secs vnc_update_client_old: 10.98 secs vnc_update_client_new2 shows the performance of vnc_update_client with this patch added. Comparing with the test run of the last patch the performance is at least unchanged while it is significantly improved for the all bits dirty case. Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-10ui/vnc: optimize dirty bitmap trackingPeter Lieven
vnc_update_client currently scans the dirty bitmap of each client bitwise which is a very costly operation if only few bits are dirty. vnc_refresh_server_surface does almost the same. this patch optimizes both by utilizing the heavily optimized function find_next_bit to find the offset of the next dirty bit in the dirty bitmaps. The following artifical test (just the bitmap operation part) running vnc_update_client 65536 times on a 2560x2048 surface illustrates the performance difference: All bits clean - vnc_update_client_new: 0.07 secs vnc_update_client_old: 10.98 secs All bits dirty - vnc_update_client_new: 11.26 secs vnc_update_client_old: 20.19 secs Few bits dirty - vnc_update_client_new: 0.08 secs vnc_update_client_old: 10.98 secs The case for all bits dirty is still rather slow, this is due to the implementation of find_and_clear_dirty_height. This will be addresses in a separate patch. Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-10ui/vnc: derive cmp_bytes from VNC_DIRTY_PIXELS_PER_BITPeter Lieven
this allows for setting VNC_DIRTY_PIXELS_PER_BIT to different values than 16 if desired. Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-10ui/vnc: introduce VNC_DIRTY_PIXELS_PER_BIT macroPeter Lieven
Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-10vnc: fix use-after-free in vnc_update_client_syncGerd Hoffmann
Spotted by Coverity: 876 static int vnc_update_client_sync(VncState *vs, int has_dirty) 877 { (1) Event freed_arg: "vnc_update_client(VncState *, int)" frees "vs". [details] Also see events: [deref_arg] 878 int ret = vnc_update_client(vs, has_dirty); (2) Event deref_arg: Calling "vnc_jobs_join(VncState *)" dereferences freed pointer "vs". [details] Also see events: [freed_arg] 879 vnc_jobs_join(vs); 880 return ret; 881 } Remove vnc_update_client_sync wrapper, replace it with an additional argument to vnc_update_client, so we can so the sync properly in vnc_update_client (i.e. skip it in case of a client disconnect). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2014-03-10vnc: Fix qemu crashed when vnc client disconnect suddenlyGonglei (Arei)
Hi, When I use RealVNC viewer client (http://www.realvnc.com/) to connect vnc server, the client disconnect suddenly, and I click reconnect button immediately, then the Qemu crashed. In the function vnc_worker_thread_loop, will call vnc_async_encoding_start to set the local vs->output buffer by global queue's buffer. Then send rectangles to the vnc client call function vnc_send_framebuffer_update. Finally, Under normal circumstances, call vnc_async_encoding_end to set the global queue'buffer by the local vs->output conversely. When the vnc client disconnect, the job->vs->csock will be set to -1. And the current prcoess logic will goto disconnected partion without call function vnc_async_encoding_end. But, the function vnc_send_framebuffer_update will call buffer_reserve, which maybe call g_realloc reset the local vs's buffer, meaning the global queue's buffer is modified also. If anyone use the original global queue's buffer memory will cause corruption and then crash qemu. This patch assure the function vnc_async_encoding_end being called even though the vnc client disconnect suddenly. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-10vnc: Fix tight_detect_smooth_image() for lossless caseMarkus Armbruster
VncTight member uint8_t quality is either (uint8_t)-1 for lossless or less than 10 for lossy. tight_detect_smooth_image() first promotes it to int, then compares with -1. Always unequal, so we always execute the lossy code. Reads beyond tight_conf[] and returns crap when quality is actually lossless. Compare to (uint8_t)-1 instead, like we do elsewhere. Spotted by Coverity. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-10Update OpenBIOS imagesMark Cave-Ayland
Update OpenBIOS images to SVN r1280 built from submodule. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2014-03-09loader: rename in_ram/has_mrMichael S. Tsirkin
we put copy of ROMs in MR for migration. but the name rom_in_ram makes one think we load it in guest RAM. Rename has_mr to make intent clearer. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-09qemu: x86: ignore ioapic polarityGabriel L. Somlo
Both QEMU and KVM have already accumulated a significant number of optimizations based on the hard-coded assumption that ioapic polarity will always use the ActiveHigh convention, where the logical and physical states of level-triggered irq lines always match (i.e., active(asserted) == high == 1, inactive == low == 0). QEMU guests are expected to follow directions given via ACPI and configure the ioapic with polarity 0 (ActiveHigh). However, even when misbehaving guests (e.g. OS X <= 10.9) set the ioapic polarity to 1 (ActiveLow), QEMU will still use the ActiveHigh signaling convention when interfacing with the emulated ioapic. This patch modifies the emulated ioapic to completely ignore polarity as set by the guest OS, enabling misbehaving guests to work alongside those which comply with the ActiveHigh polarity specified by QEMU's ACPI tables. Signed-off-by: Gabriel L. Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-09pckbd: return 'keyboard enabled' on read input port commandHervé Poussineau
Bit 7 of Input Port is the keyboard inhibit switch. 0 means keyboard inhibited, while 1 means keyboard enabled. Incidentaly, this also fixes an error encountered while booting an Award BIOS: "Keyboard is locked out - Unlock the key". Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-09pam: partly fix write-only modeHervé Poussineau
In write-only mode, writes are forwarded to RAM, while reads should not be handled (ie should return 0xff). Assume that in this mode, no read access is ever done, as they shouldn't give any sensible result. So, in write-only mode, alias PAM region to RAM, instead of PCI memory (which can even be mapped to some device!) This fixes Award BIOS, which use this mode to shadow system BIOS and video BIOS. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-09acpi-test: issue errors instead of warnings when possibleMarcel Apfelbaum
If the expected (offline) acpi tables loaded correctly, it is safe to assume the iasl installation is OK and issue an error if the actual tables failed to load. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-09acpi-test: retain both asl and aml files on failureMarcel Apfelbaum
Updated the error message while at it. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-09MAINTAINERS: drop an out of date addressMichael S. Tsirkin
Gleb's address seems to be out of date. Since it stayed like that for a while now, I'm guessing he's no longer interested in getting mail. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-09Add a 'name' parameter to qemu_thread_createDr. David Alan Gilbert
If enabled, set the thread name at creation (on GNU systems with pthread_set_np) Fix up all the callers with a thread name Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-03-09Add 'debug-threads' suboption to --nameDr. David Alan Gilbert
Add flag storage to qemu-thread-* to store the namethreads flag Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-03-09Rework --name to use QemuOptsDr. David Alan Gilbert
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-03-09PCIE: fix regression with coldplugged multifunction deviceIgor Mammedov
PCIE is causing asserts each time a multifunction device is added on command line (coldplug). This is caused by commit a66e657e18cd9b70e9f57ae5512c07faf2bc508f pci/pcie: convert PCIE hotplug to use hotplug-handler API QEMU abort is caused by misplaced assertion, which should be checked only when device is hotplugged. Reference to regression report: http://www.mail-archive.com/qemu-devel@nongnu.org/msg216226.html Fixes: a66e657e18cd9b70e9f57ae5512c07faf2bc508f Reported-By: Nigel Kukard <nkukard+qemu@lbsd.net> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-09memory_region_present: return false if address is not found in child ↵Igor Mammedov
MemoryRegion Windows XP shows COM2 port as non functional in "Device Manager" although no COM2 port backing device is present in QEMU. This regression is really due to 3bb28b7208b349e7a1b326e3c6ef9efac1d462bf? memory: Provide separate handling of unassigned io ports accesses That is caused by the fact that QEMU reports to OSPM that device is present by setting 5th bit in PII4XPM.pci_conf[0x67] register when COM2 doesn't exist. It happens due to memory_region_present(io_as, 0x2f8) returning false positive since 0x2f8 address eventually translates into catchall io_as address space. Fix memory_region_present(parent, addr) by returning true only if addr maps into a MemoryRegion within parent (excluding parent itself), to match its doc comment. While at it fix copy/paste error in memory_region_present() doc comment. Note: this is a temporary hack: we really need better handling for unassigned regions, we should avoid fallback regions since they are bad for performance (breaking radix tree assumption that the data structure is sparsely populated); for memory we need to fix this to implement PCI master abort properly, anyway. Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-09virtio-net: remove function calls from assertJoel Stanley
peer_{de,at}tach were called from inside assert(). We don't support building without NDEBUG but it's not tidy. Rearrange to attach peer outside assert calls. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-09acpi-test-data: update expected filesMichael S. Tsirkin
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-09acpi-build: append description for non-hotplugMichael S. Tsirkin
As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-08tcg-aarch64: Remove nop from qemu_st slow pathRichard Henderson
Commit 023261ef851b22a04f6c5d76da870051031757a6 failed to remove a nop that's no longer required. Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-03-08tcg-aarch64: Simplify tcg_out_ldst_9 encodingRichard Henderson
At first glance the code appears to be using 1's compliment encoding, a-la AArch32. Except that the constant is "off", creating a complicated split field 2's compliment encoding. Much clearer to just use a normal mask and shift. Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-03-08tcg-aarch64: Use intptr_t apropriatelyRichard Henderson
As opposed to tcg_target_long. Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-03-08tcg-aarch64: Remove the shift_imm parameter from tcg_out_cmpRichard Henderson
It was unused. Let's not overcomplicate things before we need them. Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-03-08tcg-aarch64: Hoist common argument loads in tcg_out_opRichard Henderson
This reduces the code size of the function significantly. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-03-08tcg-aarch64: Don't handle mov/movi in tcg_out_opRichard Henderson
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-03-08tcg-aarch64: Set ext based on TCG_OPF_64BITRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-03-08tcg-aarch64: Change all ext variables to TCGTypeRichard Henderson
We assert that the values for _I32 and _I64 are 0 and 1 respectively. This will make a couple of functions declared by tcg.c cleaner. Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-03-08tcg-aarch64: Remove redundant CPU_TLB_ENTRY_BITS checkRichard Henderson
Removed from other targets in 56bbc2f967ce185fa1c5c39e1aeb5b68b26242e9. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-03-08tcg-aarch64: Enable builtin disassemblerRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-03-08migration: extend section_start/end tracesAlexey Kardashevskiy
This adds @idstr to savevm_section_start and savevm_section_end tracepoints. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-03-08vl: add system_wakeup_request tracepointAlexey Kardashevskiy
It might be useful for tracing migration. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-03-08qemu_file: Fix mismerge of "use fwrite() correctly"Markus Armbruster
Reviewers accepted v2 of the patch, but what got committed was v1, with the R-bys for v2. This is the v1->v2 followup fix. [Amit: This fixes commit aded6539d983280212e08d09f14157b1cb4d58cc ] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-03-08XBZRLE: Fix qemu crash when resize the xbzrle cacheGonglei
Resizing the xbzrle cache during migration causes qemu-crash, because the main-thread and migration-thread modify the xbzrle cache size concurrently without lock-protection. Signed-off-by: ChenLiang <chenliang88@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-03-08Merge remote-tracking branch 'remotes/kvaneesh/for-upstream' into stagingPeter Maydell
* remotes/kvaneesh/for-upstream: hw/9pfs: Include virtio-9p-device.o in build hw/9pfs: use g_strdup_printf() instead of PATH_MAX limitation hw/9pfs/virtio-9p-local.c: use snprintf() instead of sprintf() hw/9pfs/virtio-9p-local.c: move v9fs_string_free() to below "err_out:" fsdev: Fix overrun after readlink() fills buffer completely Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-08Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block patches # gpg: Signature made Fri 07 Mar 2014 13:30:04 GMT using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: block: qemu-iotests 085 - live snapshots tests hw/ide/ahci.h: Avoid shifting left into sign bit block: Fix error path segfault in bdrv_open() qemu-iotests: Test a few blockdev-add error cases blockdev: Fix NULL pointer dereference in blockdev-add blockdev: Fail blockdev-add with encrypted images block/raw-win32: Strip "file:" prefix on creation block/raw-win32: Implement bdrv_parse_filename() block/raw-posix: Strip "file:" prefix on creation block/raw-posix: Implement bdrv_parse_filename() block: Keep "filename" option after parsing block: mirror - remove code cruft that has no function block: make bdrv_swap rebuild the bs graph node list field. block: Fix bs->request_alignment assertion for bs->sg=1 iscsi: Use bs->sg for everything else than disks qemu-iotests: Test progress output for conversion qemu-img convert: Fix progress output gluster: Remove unused defines and header include gluster: Change licence to GPLv2+ Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-08build: Fix installation of target-dependent filesLluís Vilanova
Pass all the relevant sub-directory make variables. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20140120112153.5685.30949.stgit@fimbulvetr.bsc.es
2014-03-08xenfb: Fix graphic_console_init() build failureAndreas Färber
In commit 5643706a095044d75df1c0588aac553a595b972b (console: add head to index to qemu consoles.) graphic_console_init() was extended to take an additional argument, but xenfb was not updated accordingly. Fix it. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Don Slutz <dslutz@verizon.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1394228528-31625-1-git-send-email-afaerber@suse.de
2014-03-07Merge remote-tracking branch 'remotes/kraxel/tags/pull-input-4' into stagingPeter Maydell
Input handling rewrite. SDL2 support. # gpg: Signature made Wed 05 Mar 2014 11:16:08 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-input-4: (38 commits) ui/sdl2 : initial port to SDL 2.0 (v2.0) console: add QemuUIInfo console: add head to index to qemu consoles. input: remove index_from_keycode (no users) input: move do_mouse_set to new core input: move qmp_query_mice to new core input: add input_mouse_mode tracepoint input: move mouse mode notifier to new core input-legacy: remove kbd_mouse_event input-legacy: remove kbd_mouse_is_absolute input-legacy: remove kbd_mouse_has_absolute input-legacy: remove kbd_put_keycode input: trace events input: mouse: switch cocoa ui to new core input: keyboard: switch cocoa ui to new core input: mouse: switch monitor to new core input: mouse: switch spice ui to new core input: mouse: switch vnc ui to new core input: mouse: switch sdl ui to new core input: mouse: switch gtk ui to new core ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-07Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' ↵Peter Maydell
into staging Patch queue for ppc - 2014-03-05 This pull request includes: - VSX emulation support - book3s pr/hv selection - some bug fixes - qdev stable numbering - eTSEC emulation # gpg: Signature made Wed 05 Mar 2014 02:14:19 GMT using RSA key ID 03FEDC60 # gpg: Can't check signature: public key not found * remotes/agraf/tags/signed-ppc-for-upstream: (130 commits) target-ppc: spapr: e500: fix to use cpu_dt_id target-ppc: add PowerPCCPU::cpu_dt_id target-ppc: Introduce hypervisor call H_GET_TCE target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab target-ppc: Change the hpte store API target-ppc: Fix page table lookup with kvm enabled target-ppc: Fix htab_mask calculation target-ppc: Use Additional Temporary in stqcx Case target-ppc: Fix Compiler Warnings Due to 64-Bit Constants Declared as UL PPC: sPAPR: Only use getpagesize() when we run with kvm target-ppc/translate.c: Use ULL suffix for 64 bit constants spapr-vlan: flush queue whenever can_receive can go from false to true target-ppc: Altivec 2.07: Vector Permute and Exclusive OR target-ppc: Altivec 2.07: Vector SHA Sigma Instructions target-ppc: Altivec 2.07: AES Instructions target-ppc: Altivec 2.07: Binary Coded Decimal Instructions target-ppc: Altivec 2.07: Vector Polynomial Multiply Sum target-ppc: Altivec 2.07: Vector Gather Bits by Bytes target-ppc: Altivec 2.07: Doubleword Compares target-ppc: Altivec 2.07: vbpermq Instruction ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-07Merge remote-tracking branch 'remotes/cohuck/tags/virtio-ccw-20140305' into ↵Peter Maydell
staging One patch introducing support for adapter interrupts in virtio-ccw. This improves performance for those guests that issue the new CCW_CMD_SET_IND_ADAPTER channel command. # gpg: Signature made Wed 05 Mar 2014 08:48:18 GMT using RSA key ID C6F02FAF # gpg: Can't check signature: public key not found * remotes/cohuck/tags/virtio-ccw-20140305: s390x/virtio-ccw: Adapter interrupt support. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-07block: qemu-iotests 085 - live snapshots testsJeff Cody
This adds tests for live snapshots, both through the single snapshot command, and the transaction group snapshot command. The snapshots are done through the QMP interface, using the following commands for snapshots: Single snapshot: { 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'snapshot-file':'...', 'format': 'qcow2' } }" Group snapshot: { 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': '...' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': '...' } } ] } } Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-07hw/ide/ahci.h: Avoid shifting left into sign bitPeter Maydell
Add 'U' suffixes to avoid undefined behaviour shifting left into the signed bit of a signed integer type. Clang's sanitizer will warn about this: hw/ide/ahci.c:1210:27: runtime error: left shift of 1 by 31 places cannot be represented in type 'int' Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 10:55:33 +0000