aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-14pcie_host: expose address formatMichael S. Tsirkin
Callers pass in the address so it's helpful for them to be able to decode it. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14pcie_host: expose UNMAPPED macroMichael S. Tsirkin
Make it possible to test unmapped status through QMP. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14loader: support for unmapped ROM blobsMichael S. Tsirkin
Support ROM blobs not mapped into guest memory: same as ROM files really but use caller's buffer. Support invoking callback on access and return memory pointer making it easier for caller to update memory if necessary. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14fw_cfg: interface to trigger callback on readMichael S. Tsirkin
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14pci: fix up w64 size calculation helperMichael S. Tsirkin
BAR base was calculated incorrectly. Use existing pci_bar_address to get it right. Tested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14qom: add pointer to int property helpersMichael S. Tsirkin
Make it easy to add read-only helpers for simple integer properties in memory. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14qom: cleanup struct Error referencesMichael S. Tsirkin
now that a typedef for struct Error is available, use it in qom/object.h to match coding style rules. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14cleanup object.h: include error.h directlyIgor Mammedov
qapi/error.h is simple enough to be included in qom/object.h direcly and prepares qom/object.h to use Error typedef. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/pci: removed irq field from PCIDeviceMarcel Apfelbaum
Instead of exposing the the irq field, pci wrappers to qemu_set_irq or qemu_irq_* can be used. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/pcie: AER and hot-plug events must use device's interruptMarcel Apfelbaum
The fields hpev_intx and aer_intx were removed because both AER and hot-plug events must use device's interrupt. Assert/deassert interrupts using pci irq wrappers instead. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw: set interrupts using pci irq wrappersMarcel Apfelbaum
pci_set_irq and the other pci irq wrappers use PCI_INTERRUPT_PIN config register to compute device INTx pin to assert/deassert. An irq is allocated using pci_allocate_irq wrapper only if is needed by non pci devices. Removed irq related fields from state if not used anymore. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/vfio: set interrupts using pci irq wrappersMarcel Apfelbaum
pci_set_irq and the other pci irq wrappers use PCI_INTERRUPT_PIN config register to compute device INTx pin to assert/deassert. save INTX pin into the config register before calling pci_set_irq Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/vmxnet3: set interrupts using pci irq wrappersMarcel Apfelbaum
pci_set_irq uses PCI_INTERRUPT_PIN config register to compute device INTx pin to assert/deassert. An assert is used to ensure that intx received from the quest OS corresponds to PCI_INTERRUPT_PIN. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/pci-bridge: set PCI_INTERRUPT_PIN register before shpc initMarcel Apfelbaum
The PCI_INTERRUPT_PIN will be used by shpc init, so was moved before the call to shpc_init. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/pci: add pci wrappers for allocating and asserting irqsMarcel Apfelbaum
Interrupt pin is selected and saved into PCI_INTERRUPT_PIN register during device initialization. Devices should not call directly qemu_set_irq and specify the INTx pin on each call. Added pci_* wrappers to replace qemu_set_irq, qemu_irq_raise, qemu_irq_lower and qemu_irq_pulse, setting the irq based on PCI_INTERRUPT_PIN. Added pci_allocate_irq wrapper to be used by devices that still need PCIDevice infrastructure to assert irqs. Renamed a static method which was named already pci_set_irq. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/core: Add interface to allocate and free a single IRQMarcel Apfelbaum
qemu_allocate_irq returns a single qemu_irq. The interface allows to specify an interrupt number. qemu_free_irq frees it. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/pci: partially handle pci master abortMarcel Apfelbaum
A MemoryRegion with negative priority was created and it spans over all the pci address space. It "intercepts" the accesses to unassigned pci address space and will follow the pci spec: 1. returns -1 on read 2. does nothing on write Note: setting the RECEIVED MASTER ABORT bit in the STATUS register of the device that initiated the transaction will be implemented in another series Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14docs/memory: Explictly state that MemoryRegion priority is signedMarcel Apfelbaum
When memory regions overlap, priority can be used to specify which of them takes priority. By making the priority values signed rather than unsigned, we make it more convenient to implement a situation where one "background" region should appear only where no other region exists: rather than having to explicitly specify a high priority for all the other regions, we can let them take the default (zero) priority and specify a negative priority for the background region. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14memory: Change MemoryRegion priorities from unsigned to signedMarcel Apfelbaum
When memory regions overlap, priority can be used to specify which of them takes priority. By making the priority values signed rather than unsigned, we make it more convenient to implement a situation where one "background" region should appear only where no other region exists: rather than having to explicitly specify a high priority for all the other regions, we can let them take the default (zero) priority and specify a negative priority for the background region. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-12target-alpha: Convert to new ldst opcodesRichard Henderson
Or, partially. The fundamental primitives for the port are gen_load_mem and gen_store_mem, which take a callback to emit the memory operation. For that, we continue to use the original inline functions that forward to the new ops, rather than replicate the same thing privately. That said, all free-standing calls to tcg_gen_qemu_* have been converted. The 32-bit floating-point references now use _i32 opcodes, eliminating a truncate or extension. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-ppc64: Support new ldst opcodesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-ppc: Support new ldst opcodesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-ppc64: Convert to le/be ldst helpersRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-ppc: Convert to le/be ldst helpersRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-ppc64: Use TCGMemOp within qemu_ldst routinesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-ppc: Use TCGMemOp within qemu_ldst routinesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-arm: Improve GUEST_BASE qemu_ld/stRichard Henderson
If we pull the code to emit the actual load/store into a subroutine, we can share the reg+reg addressing mode code between softmmu and usermode. This lets us load GUEST_BASE into a temporary register rather than attempting to add it piece-wise to the address. Which lets us use movw+movt for armv7, rather than (up to) 4 adds. Code size for pre-armv7 stays the same. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-arm: Convert to new ldst opcodesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-arm: Tidy variable naming convention in qemu_ld/stRichard Henderson
s/addr_reg2/addrhi/ s/addr_reg/addrlo/ s/data_reg2/datahi/ s/data_reg/datalo/ Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-arm: Convert to le/be ldst helpersRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-arm: Use TCGMemOp within qemu_ldst routinesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-i386: Support new ldst opcodesRichard Henderson
No support for helpers with non-default endianness yet, but good enough to test the opcodes. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-i386: Remove "cb" output restriction from qemu_st8 for i386Richard Henderson
Once we form a combined qemu_st_i32 opcode, we won't be able to have separate constraints based on size. This one is fairly easy to work around, since eax is available as a scratch register. When storing variable data, this tends to merely exchange one mov for another. E.g. -: mov %esi,%ecx ... -: mov %cl,(%edx) +: mov %esi,%eax +: mov %al,(%edx) Where we do have a regression is when storing constant data, in which we may load the constant into edi, when only ecx/ebx ought to be used. The proper way to recover this regression is to allow constants as arguments to qemu_st_i32, so that we never load the constant data into a register at all, must less the wrong register. TBD. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-i386: Tidy softmmu routinesRichard Henderson
Pass two TCGReg to tcg_out_tlb_load, rather than idx+args. Move ldst_optimization routines just below tcg_out_tlb_load to avoid the need for forward declarations. Use TCGReg enum in preference to int where apprpriate. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-i386: Use TCGMemOp within qemu_ldst routinesRichard Henderson
Step one in the transition, with constants passed down from tcg_out_op. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg: Use TCGMemOp for TCGLabelQemuLdst.opcRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-11Merge remote-tracking branch 'mdroth/qga-pull-2013-10-10' into stagingAnthony Liguori
# By Mark Wu (2) and Tomoki Sekiyama (1) # Via Michael Roth * mdroth/qga-pull-2013-10-10: qemu-ga: Extend 'guest-info' command to expose flag 'success-response' qemu-ga: Add interface to traverse the qmp command list by QmpCommand qemu-ga: execute fsfreeze-freeze in reverse order of mounts Message-id: 1381435782-25524-1-git-send-email-mdroth@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-10-11Merge remote-tracking branch 'rth/tcg-pull' into stagingAnthony Liguori
# By Richard Henderson # Via Richard Henderson * rth/tcg-pull: exec: Add both big- and little-endian memory helpers tcg: Add qemu_ld_st_i32/64 tcg: Add TCGMemOp configure: Remove CONFIG_QEMU_LDST_OPTIMIZATION tcg: Add tcg-be-ldst.h tcg: Add tcg-be-null.h exec: Delete is_tcg_gen_code and GETRA_EXT tcg-aarch64: Update to helper_ret_*_mmu routines tcg: Merge tcg_register_helper into tcg_context_init tcg: Add tcg-runtime.c helpers to all_helpers tcg: Put target helper data into an array. tcg: Remove stray semi-colons from target-*/helper.h tcg: Move helper registration into tcg_context_init target-m68k: Rename helpers.h to helper.h tcg: Use a GHashTable for tcg_find_helper tcg: Delete tcg_helper_get_name declaration tcg-hppa: Remove tcg backend Message-id: 1381440525-6666-1-git-send-email-rth@twiddle.net Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-10-11qdev-monitor: Group "device_add help" and "info qdm" by categoryMarkus Armbruster
Output is a long, unsorted list. Not very helpful. Print one list per device category instead, with a header line identifying the category, plus a list of uncategorized devices. Print each list in case-insenitive alphabetical order. Devices with multiple categories are listed multiple times. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com> Message-id: 1381410021-1538-3-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-10-11Mostly revert "qemu-help: Sort devices by logical functionality"Markus Armbruster
This reverts most of commit 3d1237fb2ab4edb926c717767bb5e31d6053a7c5. The commit claims to sort the output of "-device help" "by functionality rather than alphabetical". Issues: * The output was unsorted before, not alphabetically sorted. Misleading, but harmless enough. * The commit doesn't just sort the output of "-device help" as it claims, it adds categories to each line of "-device help", and it prints devices once per category. In particular, devices without a category aren't shown anymore. Maybe such devices should not exist, but they do. Regression. * Categories are also added to the output of "info qdm". Silent change, not nice. Output remains unsorted, unlike "-device help". I'm going to reimplement the feature we actually want, without the warts. Reverting the flawed commit first should make it easier to review. However, I can't revert it completely, since DeviceClass member categories has been put to use. So leave that part in. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com> Message-id: 1381410021-1538-2-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-10-11Use qemu-project.org domain nameStefan Hajnoczi
qemu.org is held by a third-party and no core community contributor has access to the DNS configuration. This leaves the website exposed to outages due to DNS issues or IP address changes. For example, if the web server IP address needs to change we cannot guarantee qemu.org will point to it! The newer qemu-project.org domain name is owned by Anthony Liguori <anthony@codemonkey.ws>. You can confirm this by querying the whois information. Also note that the #qemu IRC channel topic already references qemu-project.org. Short of having a dedicated legal entity to hold the domain name on behalf of the community, qemu-project.org seems like the safest bet. Let's replace references to qemu.org with qemu-project.org. Note that git-submodule(1) does not detect URL changes. The following commands clear out and re-initialize all submodules to ensure you are using the latest URLs: $ git submodule deinit . # you'll be warned if you have local changes $ rm -rf .git/modules # also clear cached .git/ directories $ git submodule update --init Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1381495958-8306-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-10-11Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
# By Max Reitz (30) and others # Via Kevin Wolf * kwolf/for-anthony: (61 commits) qemu-iotests: Add test for inactive L2 overlap qemu-io: Let "open" pass options to block driver vmdk: Fix vmdk_parse_extents blockdev: blockdev_init() error conversion blockdev: Don't disable COR automatically with blockdev-add blockdev: Remove 'media' parameter from blockdev_init() qemu-iotests: Check autodel behaviour for device_del blockdev: Remove IF_* check for read-only blockdev_init blockdev: Move virtio-blk device creation to drive_init blockdev: Move bus/unit/index processing to drive_init blockdev: Move parsing of 'boot' option to drive_init blockdev: Moving parsing of geometry options to drive_init blockdev: Move parsing of 'if' option to drive_init blockdev: Move parsing of 'media' option to drive_init blockdev: Pass QDict to blockdev_init() blockdev: Separate ID generation from DriveInfo creation blockdev: 'blockdev-add' QMP command blockdev: Introduce DriveInfo.enable_auto_del qapi-types/visit.py: Inheritance for structs qapi-types/visit.py: Pass whole expr dict for structs ... Message-id: 1381503951-27985-1-git-send-email-kwolf@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-10-11qemu-iotests: Add test for inactive L2 overlapMax Reitz
Extend 060 by a test which creates a corrupted image with an active L2 entry pointing to an inactive L2 table and writes to the corresponding guest offset. Also, use overlap-check=all for all tests in 060. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-11qemu-io: Let "open" pass options to block driverMax Reitz
Add an option to the open command to specify runtime options for the block driver used. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-11vmdk: Fix vmdk_parse_extentsFam Zheng
An extra 'p++' after while loop when *p == '\n' will move p to unknown data position, risking parsing junk data or memory access violation. Cc: qemu-stable@nongnu.org Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-11blockdev: blockdev_init() error conversionKevin Wolf
This gives us meaningful error messages for the blockdev-add QMP command. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11blockdev: Don't disable COR automatically with blockdev-addKevin Wolf
If a read-only device is configured with copy-on-read=on, the old code only prints a warning and automatically disables copy on read. Make it a real error for blockdev-add. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11blockdev: Remove 'media' parameter from blockdev_init()Kevin Wolf
The remaining users shouldn't be there with blockdev-add and are easy to move to drive_init(). Bonus bug fix: As a side effect, CD-ROM drives can now use block drivers on the read-only whitelist without explicitly specifying read-only=on, even if a format is explicitly specified. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11qemu-iotests: Check autodel behaviour for device_delKevin Wolf
Block devices creates with -drive and drive_add should automatically disappear if the guest device is unplugged. blockdev-add ones shouldn't. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11blockdev: Remove IF_* check for read-only blockdev_initKevin Wolf
IF_NONE allows read-only, which makes forbidding it in this place for other types pretty much pointless. Instead, make sure that all devices for which the check would have errored out check in their init function that they don't get a read-only BlockDriverState. This catches even cases where IF_NONE and -device is used. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>