aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-08-07Remove unused is_softmmu parameter from cpu_handle_mmu_faultBlue Swirl
Parameter is_softmmu (and its evil mutant twin brother is_softmuu) is not used in cpu_*_handle_mmu_fault() functions, remove them and adjust callers. Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-06Fix handling of conditional branches in delay slot of a conditional branchArtyom Tarasenko
Check whether dc->npc is dynamic before using its value for branch. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-05Merge remote-tracking branch 'kiszka/queues/slirp' into stagingAnthony Liguori
2011-08-05when overriding default tool names don't add cross-prefixStuart Yoder
When overriding a tool name via a shell variable, don't tack on the cross-prefix. This specifically allows the pkg-config command to be overridden and work where it does not exist in some cross build environments. Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05Reorganize and fix monitor resume after migrationJan Kiszka
If migration failed in migrate_fd_put_buffer, the monitor may have been resumed not only in the error path of that function but also once again in migrate_fd_put_ready which is called unconditionally by migrate_fd_connect. Fix this by establishing a cleaner policy: the monitor shall be resumed when the migration file is closed, either via callback (migrate_fd_close) or in migrate_fd_cleanup if no file is open (i.e. no callback invoked). Reported-By: Michael Tokarev <mjt@tls.msk.ru> Tested-By: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05qdev: Eliminate duplicate resetIsaku Yamahata
qbus_reset_all_fn was registered twice, so a lot of device reset functions were also called twice when QEMU started. Which was introduced by 80376c3fc2c38fdd45354e4b0eb45031f35587ed This patch fixes it by making the main_system_bus creation not register reset handler. Cc: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Tested-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05Avoid allocating TCG resources in non-TCG modeJan Kiszka
Do not allocate TCG-only resources like the translation buffer when running over KVM or XEN. Saves a "few" bytes in the qemu address space and is also conceptually cleaner. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05memory: use signed arithmeticAvi Kivity
When trying to map an alias of a ram region, where the alias starts at address A and we map it into address B, and A > B, we had an arithmetic underflow. Because we use unsigned arithmetic, the underflow converted into a large number which failed addrrange_intersects() tests. The concrete example which triggered this was cirrus vga mapping the framebuffer at offsets 0xc0000-0xc7fff (relative to the start of the framebuffer) into offsets 0xa0000 (relative to system addres space start). With our favorite analogy of a windowing system, this is equivalent to dragging a subwindow off the left edge of the screen, and failing to clip it into its parent window which is on screen. Fix by switching to signed arithmetic. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05memory: synchronize dirty bitmap before unmapping a rangeAvi Kivity
When a range is being unmapped, ask accelerators (e.g. kvm) to synchronize the dirty bitmap to avoid losing information forever. Fixes grub2 screen update. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Refactor sdl_send_mouse_eventJan Kiszka
Replace width/height globals with the identical values from real_screen, refactor the function according to our coding style. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Factor out event handlers from sdl_refreshJan Kiszka
No functional changes. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Add zoom hot keysJan Kiszka
Allow to enlarge or shrink the screen via CTRL-ALT-+/-. In contrast to scaling the window, these controls always preserve the aspect ratio of the current console. CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Dynamically grab input in absolute mouse modeJan Kiszka
Not grabbing the input means that special keys like ALT+TAB are still handled by the host. Improve the usability by grabbing input once the mouse is inside the guest screen, provided the SDL window has the input focus. Release it again when the mouse is moved to any border. Also grab the input when we gain the input focus and the mouse is within the screen limits. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Fix cursor handling when switching consoles in absolute mouse modeJan Kiszka
Restore the cursor when switching from graphic to text console while the mouse is in absolute mode. Disable it again when returning. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Never release input while in full screen modeJan Kiszka
It's confusing to suddenly find two mice in full screen mode when switching consoles or accidentally hitting the grab hot keys. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Consistently avoid grabbing input for text consolesJan Kiszka
There were some preexisting bits that released the input when switching to text console. This patch spreads this logic consistently and also avoids grabbing the input while a text console is active. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Initialize gui_fullscreen earlier during setupJan Kiszka
This ensures that we actually enter full screen on startup when e.g. '-vga none -full-screen' was specified. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Drop bogus gui_fullscreen_initial_grabJan Kiszka
There must be no difference between initial -full-screen and switching to this mode via the hot key. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Restore scaling mode on return from full screenJan Kiszka
Save the scaling mode and its geometry when going full screen, restore it when returning to windowed mode. CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Fix full screen toggling from scaled modeJan Kiszka
When switching to full screen mode from a scaled window, we need to resize to DisplayState's dimension, not the scaled "real" screen size. Moreover, scaling mode may have manipulated the bpp. So we need to restore it from the DisplayState as well. CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Properly mark modifier+u as hotkeyJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Avoid redundant scaling deactivationJan Kiszka
Prevents screen flickering. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Do not make full screen mode resizableJan Kiszka
This prevents continuous resizing events and improper screen setups when going full screen. CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05sdl: Fix termination in -no-shutdown modeJan Kiszka
Just like the monitor does, we need to clear no_shutdown before calling qemu_system_shutdown_request on quit requests. Otherwise, QEMU just stops the VM. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05Check fread() results to avoid gcc 4.6 warningsDavid Gibson
When compiling with gcc 4.6, some code in fw_cfg.c complains that fop_ret is assigned but not used (which is true). However, it looks like the meaningless assignments to fop_ret were done to suppress other gcc warnings due to the fact that fread() is labelled as warn_unused_result in glibc. This patch avoids both errors, by actually checking the fread() result code and dropping out with an error message if it fails. Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05MAINTAINERS: add entry for XenStefano Stabellini
Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05qcow2: Fix L1 table size after bdrv_snapshot_gotoKevin Wolf
When loading an internal snapshot whose L1 table is smaller than the current L1 table, the size of the current L1 would be shrunk to the snapshot's L1 size in memory, but not on disk. This lead to incorrect refcount updates and eventuelly to image corruption. Instead of writing the new L1 size to disk, this simply retains the bigger L1 size that is currently in use and makes sure that the unused part is zeroed. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Philipp Hahn <hahn@univention.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05slirp: Only start packet expiration for delayed onesJan Kiszka
The expiration timeout must only affect packets that are queued due to pending ARP resolutions. The old version broke ping e.g. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-08-05slirp: Read current time only once per if_start callJan Kiszka
No need to update the current time for each packet we send from the queue. Processing time is comparably short. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-08-05slirp: Fix types of IP address parametersJan Kiszka
Should be uint32_t for IPv4, not int. Also avoid in_addr_t without proper includes. Fixes build regression on mingw32. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-08-04Merge remote-tracking branch 'mst/for_anthony' into stagingAnthony Liguori
2011-08-04Merge remote-tracking branch 'alon/pull-libcacard.data' into stagingAnthony Liguori
2011-08-04Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
2011-08-04Merge remote-tracking branch 'spice/spice.v40' into stagingAnthony Liguori
2011-08-04Merge remote-tracking branch 'kiszka/queues/slirp' into stagingAnthony Liguori
2011-08-04Merge remote-tracking branch 'kraxel/usb.22' into stagingAnthony Liguori
2011-08-04Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
2011-08-04guest agent: add --enable-guest-agent config optionMichael Roth
QAPI will require glib/python, but for now the guest agent is the only user. For now, make these dependencies an explicit guest agent one, and give users the option to disable it if need be. Once QAPI is adopted in core QEMU code, we would basically revert this patch. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-04Add support for finding libpng via pkg-config.Brad
Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-04alpha-softmmu: Disable for the 0.15 release branch.Richard Henderson
The system emulation code was not merged before the branch. Let's leave that work for the next release. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-04configure: Fix bad shell expression for non-Linux hostsStefan Weil
With vhost_net="" (most non-Linux hosts), configure prints an error message: test: 2551: =: unexpected operator Fix this and similar code by adding the missing "". Cc: Wolfgang Mauerer <wolfgang.mauerer@siemens.com> Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-04virtio-balloon: Unregister savevm section on device unplugAmit Shah
Migrating after unplugging a virtio-balloon device resulted in an error message on the destination: Unknown savevm section or instance '0000:00:04.0/virtio-balloon' 0 load of migration failed Fix this by unregistering the section on device unplug. Signed-off-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2011-08-04virtio-balloon: Add exit handler, fix memleaksAmit Shah
Add an exit handler that will free up RAM after a virtio-balloon device is unplugged. Signed-off-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2011-08-04balloon: Reject negative balloon valuesAmit Shah
Negative balloon values don't make sense, reject them and throw a qerror with QERR_INVALID_PARAMETER_VALUE. Reported-by: Mike Cao <bcao@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2011-08-04virtio-balloon: Check if balloon registration failedAmit Shah
Multiple balloon registrations are not allowed; check if the registration with the qemu balloon api succeeded. If not, fail the device init. Signed-off-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2011-08-04balloon: Don't allow multiple balloon handler registrationsAmit Shah
Multiple balloon devices don't make sense; disallow more than one registration attempt to register handlers. Signed-off-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2011-08-04virtio-balloon: Fix header comment; add CopyrightAmit Shah
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-08-04balloon: Fix header comment; add CopyrightAmit Shah
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-08-04balloon: Separate out stat and balloon handlingAmit Shah
Passing on '0' as ballooning target to indicate retrieval of stats is bad API. It also makes 'balloon 0' in the monitor cause a segfault. Have two different functions handle the different functionality instead. Detailed explanation from Markus's review: 1. do_info_balloon() is an info_async() method. It receives a callback with argument, to be called exactly once (callback frees the argument). It passes the callback via qemu_balloon_status() and indirectly through qemu_balloon_event to virtio_balloon_to_target(). virtio_balloon_to_target() executes its balloon stats half. It stores the callback in the device state. If it can't send a stats request, it resets stats and calls the callback right away. Else, it sends a stats request. The device model runs the callback when it receives the answer. Works. 2. do_balloon() is a cmd_async() method. It receives a callback with argument, to be called when the command completes. do_balloon() calls it right before it succeeds. Odd, but should work. Nevertheless, it passes the callback on via qemu_ballon() and indirectly through qemu_balloon_event to virtio_balloon_to_target(). a. If the argument is non-zero, virtio_balloon_to_target() executes its balloon half, which doesn't use the callback in any way. Odd, but works. b. If the argument is zero, virtio_balloon_to_target() executes its balloon stats half, just like in 1. It either calls the callback right away, or arranges for it to be called later. Thus, the callback runs twice: use after free and double free. Test case: start with -S -device virtio-balloon, execute "balloon 0" in human monitor. Runs the callback first from virtio_balloon_to_target(), then again from do_balloon(). Reported-by: Mike Cao <bcao@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2011-08-04virtio-balloon: Separate status handling into separate functionAmit Shah
Separate out the code to retrieve balloon info from the code that sets balloon values. This will be used to separate the two callbacks from balloon.c and help cope with 'balloon 0' on the monitor. Currently, 'balloon 0' causes a segfault in monitor_resume(). Signed-off-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-28 19:03:37 +0000