aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-06tcg-mips: Support 64-bit opcodesJin Guojie
Bulk patch adding 64-bit opcodes into tcg_out_op. Note that mips64 is as yet neither complete nor enabled. Tested-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: James Hogan <james.hogan@imgtec.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jin Guojie <jinguojie@loongson.cn> Message-Id: <1483592275-4496-4-git-send-email-jinguojie@loongson.cn>
2017-01-06tcg-mips: Add mips64 opcodesJin Guojie
Since the mips manual tables are in octal, reorg all of the opcodes into that format for clarity. Note that the 64-bit opcodes are as yet unused. Tested-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: James Hogan <james.hogan@imgtec.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jin Guojie <jinguojie@loongson.cn> Message-Id: <1483592275-4496-3-git-send-email-jinguojie@loongson.cn>
2017-01-06tcg-mips: Move bswap code to a subroutineJin Guojie
Without the mips32r2 instructions to perform swapping, bswap is quite large, dominating the size of each reverse-endian qemu_ld/qemu_st operation. Create a subroutine in the prologue block. The subroutine requires extra reserved registers (TCG_TMP[2, 3]). Using these within qemu_ld means that we need not place additional restrictions on the qemu_ld outputs. Tested-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: James Hogan <james.hogan@imgtec.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jin Guojie <jinguojie@loongson.cn> Message-Id: <1483592275-4496-2-git-send-email-jinguojie@loongson.cn>
2017-01-06Merge remote-tracking branch 'remotes/gonglei/tags/cryptodev-next-20161224' ↵Peter Maydell
into staging cryptodev patches - add xts mode support - add 3DES algorithm support - other trivial fixes # gpg: Signature made Sat 24 Dec 2016 05:56:44 GMT # gpg: using RSA key 0x2ED7FDE9063C864D # gpg: Good signature from "Gonglei <arei.gonglei@huawei.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 3EF1 8E53 3459 E6D1 963A 3C05 2ED7 FDE9 063C 864D * remotes/gonglei/tags/cryptodev-next-20161224: cryptodev: add 3des-ede support cryptodev: remove single-DES support in cryptodev cryptodev: add xts(aes) support cryptodev: fix the check of aes algorithm Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-06Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Fri 06 Jan 2017 02:55:49 GMT # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: fsl_etsec: Fix Tx BD ring wrapping handling rtl8139: correctly handle PHY reset record/replay: add network support Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-06fsl_etsec: Fix Tx BD ring wrapping handlingAndrey Smirnov
Current code that handles Tx buffer desciprtor ring scanning employs the following algorithm: 1. Restore current buffer descriptor pointer from TBPTRn 2. Process current descriptor 3. If current descriptor has BD_WRAP flag set set current descriptor pointer to start of the descriptor ring 4. If current descriptor points to start of the ring exit the loop, otherwise increment current descriptor pointer and go to #2 5. Store current descriptor in TBPTRn The way the code is implemented results in buffer descriptor ring being scanned starting at offset/descriptor #0. While covering 99% of the cases, this algorithm becomes problematic for a number of edge cases. Consider the following scenario: guest OS driver initializes descriptor ring to N individual descriptors and starts sending data out. Depending on the volume of traffic and probably guest OS driver implementation it is possible that an edge case where a packet, spread across 2 descriptors is placed in descriptors N - 1 and 0 in that order(it is easy to imagine similar examples involving more than 2 descriptors). What happens then is aforementioned algorithm starts at descriptor 0, sees a descriptor marked as BD_LAST, which it happily sends out as a separate packet(very much malformed at this point) then the iteration continues and the first part of the original packet is tacked to the next transmission which ends up being bogus as well. This behvaiour can be pretty reliably observed when scp'ing data from a guest OS via TAP interface for files larger than 160K (every time for 700K+). This patch changes the scanning algorithm to do the following: 1. Restore "current" buffer descriptor pointer from TBPTRn 2. If "current" descriptor does not have BD_TX_READY set, goto #6 3. Process current descriptor 4. If "current" descriptor has BD_WRAP flag set "current" descriptor pointer to start of the descriptor ring otherwise set increment "current" by the size of one descriptor 5. Goto #1 6. Save "current" buffer descriptor in TBPTRn This way we preserve the information about which descriptor was processed last and always start where we left off avoiding the original problem. On top of that, judging by the following excerpt from MPC8548ERM (p. 14-48): "... When the end of the TxBD ring is reached, eTSEC initializes TBPTRn to the value in the corresponding TBASEn. The TBPTR register is internally written by the eTSEC’s DMA controller during transmission. The pointer increments by eight (bytes) each time a descriptor is closed successfully by the eTSEC..." revised algorithm might also a more correct way of emulating this aspect of eTSEC peripheral. Cc: Alexander Graf <agraf@suse.de> Cc: Scott Wood <scottwood@freescale.com> Cc: Jason Wang <jasowang@redhat.com> Cc: qemu-devel@nongnu.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-01-06rtl8139: correctly handle PHY resetHervé Poussineau
According to datasheet: "[Bit 15 of Basic Mode Control Register] sets the status and control registers of the PHY (register 0062-0074) in a default state. This bit is self-clearing. 1 = software reset; 0 = normal operation." This fixes the netcard detection failure in Minoca OS. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-01-06record/replay: add network supportPavel Dovgalyuk
This patch adds support of recording and replaying network packets in irount rr mode. Record and replay for network interactions is performed with the network filter. Each backend must have its own instance of the replay filter as follows: -netdev user,id=net1 -device rtl8139,netdev=net1 -object filter-replay,id=replay,netdev=net1 Replay network filter is used to record and replay network packets. While recording the virtual machine this filter puts all packets coming from the outer world into the log. In replay mode packets from the log are injected into the network device. All interactions with network backend in replay mode are disabled. v5 changes: - using iov_to_buf function instead of loop Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-01-05Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Wed 04 Jan 2017 13:29:09 GMT # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: iothread: add poll-grow and poll-shrink parameters aio: self-tune polling time virtio: disable virtqueue notifications during polling aio: add .io_poll_begin/end() callbacks virtio: turn vq->notification into a nested counter virtio-scsi: suppress virtqueue kick during processing virtio-blk: suppress virtqueue kick during processing iothread: add polling parameters linux-aio: poll ring for completions virtio: poll virtqueues for new buffers aio: add polling mode to AioContext aio: add AioPollFn and io_poll() interface aio: add flag to skip fds to aio_dispatch() HACKING: document #include order Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-05Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into stagingPeter Maydell
- transport specific callbacks (for Xen) - fix crash (2.8 regression) - 9p functional tests # gpg: Signature made Tue 03 Jan 2017 17:30:58 GMT # gpg: using DSA key 0x02FC3AEB0101DBC2 # gpg: Good signature from "Greg Kurz <groug@kaod.org>" # gpg: aka "Greg Kurz <groug@free.fr>" # gpg: aka "Greg Kurz <gkurz@fr.ibm.com>" # gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>" # gpg: aka "Gregory Kurz (Groug) <groug@free.fr>" # gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>" # gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2 * remotes/gkurz/tags/for-upstream: tests: virtio-9p: ".." cannot be used to walk out of the shared directory tests: virtio-9p: no slash in path elements during walk tests: virtio-9p: add walk operation test tests: virtio-9p: add attach operation test tests: virtio-9p: add version operation test 9pfs: fix P9_NOTAG and P9_NOFID macros tests: virtio-9p: code refactoring tests: virtio-9p: rename PCI configuration test 9pfs: fix crash when fsdev is missing 9pfs: introduce init_out/in_iov_from_pdu 9pfs: call v9fs_init_qiov_from_pdu before v9fs_pack 9pfs: introduce transport specific callbacks 9pfs: move pdus to V9fsState Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-05Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20170103-1' into ↵Peter Maydell
staging virtio-gpu: misc bugfixes. # gpg: Signature made Tue 03 Jan 2017 14:48:04 GMT # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/pull-vga-20170103-1: virtio-gpu: fix memory leak in resource attach backing virtio-gpu-3d: fix memory leak in resource attach backing virtio-gpu: call cleanup mapping function in resource destroy virtio-gpu: track and limit host memory allocations display: virtio-gpu-3d: check virgl capabilities max_size Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-03iothread: add poll-grow and poll-shrink parametersStefan Hajnoczi
These parameters control the poll time self-tuning algorithm. They are optional and will default to sane values if omitted. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-14-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03aio: self-tune polling timeStefan Hajnoczi
This patch is based on the algorithm for the kvm.ko halt_poll_ns parameter in Linux. The initial polling time is zero. If the event loop is woken up within the maximum polling time it means polling could be effective, so grow polling time. If the event loop is woken up beyond the maximum polling time it means polling is not effective, so shrink polling time. If the event loop makes progress within the current polling time then the sweet spot has been reached. This algorithm adjusts the polling time so it can adapt to variations in workloads. The goal is to reach the sweet spot while also recognizing when polling would hurt more than help. Two new trace events, poll_grow and poll_shrink, are added for observing polling time adjustment. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-13-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03virtio: disable virtqueue notifications during pollingStefan Hajnoczi
This is a performance optimization to eliminate vmexits during polling. It also avoids spurious ioeventfd processing after polling ends. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-12-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03aio: add .io_poll_begin/end() callbacksStefan Hajnoczi
The begin and end callbacks can be used to prepare for the polling loop and clean up when polling stops. Note that they may only be called once for multiple aio_poll() calls if polling continues to succeed. Once polling fails the end callback is invoked before aio_poll() resumes file descriptor monitoring. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-11-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03virtio: turn vq->notification into a nested counterStefan Hajnoczi
Polling should disable virtqueue notifications but that requires nested virtio_queue_set_notification() calls. Turn vq->notification into a counter so it is possible to do nesting. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-10-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03virtio-scsi: suppress virtqueue kick during processingStefan Hajnoczi
The guest does not need to kick the virtqueue while we are processing it. This reduces the number of vmexits during periods of heavy I/O. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-9-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03virtio-blk: suppress virtqueue kick during processingStefan Hajnoczi
The guest does not need to kick the virtqueue while we are processing it. This reduces the number of vmexits during periods of heavy I/O. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-8-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03iothread: add polling parametersStefan Hajnoczi
Poll mode can be configured with -object iothread,poll-max-ns=NUM. Polling is disabled with a value of 0 nanoseconds. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-7-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03linux-aio: poll ring for completionsStefan Hajnoczi
The Linux AIO userspace ABI includes a ring that is shared with the kernel. This allows userspace programs to process completions without system calls. Add an AioContext poll handler to check for completions in the ring. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-6-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03virtio: poll virtqueues for new buffersStefan Hajnoczi
Add an AioContext poll handler to detect new virtqueue buffers without waiting for a guest->host notification. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-5-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03aio: add polling mode to AioContextStefan Hajnoczi
The AioContext event loop uses ppoll(2) or epoll_wait(2) to monitor file descriptors or until a timer expires. In cases like virtqueues, Linux AIO, and ThreadPool it is technically possible to wait for events via polling (i.e. continuously checking for events without blocking). Polling can be faster than blocking syscalls because file descriptors, the process scheduler, and system calls are bypassed. The main disadvantage to polling is that it increases CPU utilization. In classic polling configuration a full host CPU thread might run at 100% to respond to events as quickly as possible. This patch implements a timeout so we fall back to blocking syscalls if polling detects no activity. After the timeout no CPU cycles are wasted on polling until the next event loop iteration. The run_poll_handlers_begin() and run_poll_handlers_end() trace events are added to aid performance analysis and troubleshooting. If you need to know whether polling mode is being used, trace these events to find out. Note that the AioContext is now re-acquired before disabling notify_me in the non-polling case. This makes the code cleaner since notify_me was enabled outside the non-polling AioContext release region. This change is correct since it's safe to keep notify_me enabled longer (disabling is an optimization) but potentially causes unnecessary event_notifer_set() calls. I think the chance of performance regression is small here. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-4-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03aio: add AioPollFn and io_poll() interfaceStefan Hajnoczi
The new AioPollFn io_poll() argument to aio_set_fd_handler() and aio_set_event_handler() is used in the next patch. Keep this code change separate due to the number of files it touches. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03aio: add flag to skip fds to aio_dispatch()Stefan Hajnoczi
Polling mode will not call ppoll(2)/epoll_wait(2). Therefore we know there are no fds ready and should avoid looping over fd handlers in aio_dispatch(). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-2-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03HACKING: document #include orderStefan Hajnoczi
It was not obvious to me why "qemu/osdep.h" must be the first #include. This documents the rationale and the overall #include order. Cc: Fam Zheng <famz@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1479307161-24658-1-git-send-email-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03tests: virtio-9p: ".." cannot be used to walk out of the shared directoryGreg Kurz
According to the 9P spec at http://man.cat-v.org/plan_9/5/intro, the parent directory of the root directory of a server's tree is itself. This test hence checks that the qid of the root directory as returned by attach is the same as the qid of ".." when walking from the root directory. Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-03tests: virtio-9p: no slash in path elements during walkGreg Kurz
The walk operation is expected to fail and to return ENOENT. Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-03tests: virtio-9p: add walk operation testGreg Kurz
The walk operation is used to traverse the directory tree and to associate paths to fids. A single walk can be used to traverse up to P9_MAXWELEM path elements at the same time. The test creates a path with P9_MAXWELEM elements on the backend (à la 'mkdir -p') and issues a walk operation. The walk is expected to succeed without error. Reference: http://man.cat-v.org/plan_9/5/walk Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-03tests: virtio-9p: add attach operation testGreg Kurz
The attach operation is used to establish a connection between the client and the server. After this, the client is able to access the underlying filesystem and do I/O. This test simply ensures the operation succeeds without error. Reference: http://man.cat-v.org/plan_9/5/attach Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-03tests: virtio-9p: add version operation testGreg Kurz
This patch lays the foundations to be able to test 9P operations and provides a test for the version operation as a first example. A 9P request is composed of a T-message sent by the client (guest) to the server (QEMU), and a R-message sent by the server back to the client. The following general calls are available to implement requests for any 9P operations: v9fs_req_init(): allocates the request structure and the guest memory for the T-message v9fs_req_send(): allocates the guest memory for the R-message and sends the T-message to QEMU v9fs_req_recv(): waits for QEMU to answer and does some sanity checks on the returned R-message header v9fs_req_free(): releases the guest memory and the request structure Helpers are provided, to be used by each specific 9P operation to copy data to/from the guest memory. The version operation is used to negotiate the 9P protocol version to be used and the maximum buffer size for exchanged data. It is necessarily the first message of a 9P session. For simplicity, the maximum buffer size is hardcoded to 4k, which should be enough for functional tests. The test simply advertises the "9P2000.L" version to QEMU and expects QEMU to answer it is supported. References: http://man.cat-v.org/plan_9/5/intro http://man.cat-v.org/plan_9/5/version Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-039pfs: fix P9_NOTAG and P9_NOFID macrosGreg Kurz
The u16 and u32 types don't exist in QEMU common headers. It never broke build because these two macros aren't use by the current code, but this is about to change with the future addition of functional tests for 9P. Also, these should have enclosing parenthesis to be usable in any syntactical situation. As suggested by Eric Blake, let's use UINT16_MAX and UINT32_MAX to address both issues. Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-03tests: virtio-9p: code refactoringGreg Kurz
This moves the test_share static and the QOSState into the QVirtIO9P structure, and put PCI related code in functions with a _pci_ name. This will avoid code duplication in future tests, and allow to add support for non-PCI platforms. Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-03tests: virtio-9p: rename PCI configuration testGreg Kurz
Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-039pfs: fix crash when fsdev is missingGreg Kurz
If the user passes -device virtio-9p without the corresponding -fsdev, QEMU dereferences a NULL pointer and crashes. This is a 2.8 regression introduced by commit 702dbcc274e2c. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Li Qiang <liq3ea@gmail.com>
2017-01-039pfs: introduce init_out/in_iov_from_pduStefano Stabellini
Not all 9pfs transports share memory between request and response. For those who don't, it is necessary to know how much memory is required in the response. Split the existing init_iov_from_pdu function in two: init_out_iov_from_pdu (for writes) and init_in_iov_from_pdu (for reads). init_in_iov_from_pdu takes an additional size parameter to specify the memory required for the response message. Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-039pfs: call v9fs_init_qiov_from_pdu before v9fs_packStefano Stabellini
v9fs_xattr_read should not access VirtQueueElement elems directly. Move v9fs_init_qiov_from_pdu up in the file and call v9fs_init_qiov_from_pdu before v9fs_pack. Use v9fs_pack on the new iovec. Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-039pfs: introduce transport specific callbacksStefano Stabellini
Don't call virtio functions from 9pfs generic code, use generic function callbacks instead. Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-039pfs: move pdus to V9fsStateStefano Stabellini
pdus are initialized and used in 9pfs common code. Move the array from V9fsVirtioState to V9fsState. Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-03virtio-gpu: fix memory leak in resource attach backingLi Qiang
In the resource attach backing function, everytime it will allocate 'res->iov' thus can leading a memory leak. This patch avoid this. Signed-off-by: Li Qiang <liq3ea@gmail.com> Message-id: 1483003721-65360-1-git-send-email-liq3ea@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-01-03virtio-gpu-3d: fix memory leak in resource attach backingLi Qiang
If the virgl_renderer_resource_attach_iov function fails the 'res_iovs' will be leaked. Add check of the return value to free the 'res_iovs' when failing. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 1482999086-59795-1-git-send-email-liq3ea@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-01-03virtio-gpu: call cleanup mapping function in resource destroyLi Qiang
If the guest destroy the resource before detach banking, the 'iov' and 'addrs' field in resource is not freed thus leading memory leak issue. This patch avoid this. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 1480386565-10077-1-git-send-email-liq3ea@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-12-28Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-2.9-pull-request' ↵Peter Maydell
into staging # gpg: Signature made Tue 27 Dec 2016 17:52:12 GMT # gpg: using RSA key 0xF30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" # gpg: aka "Laurent Vivier <laurent@vivier.eu>" # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/m68k-for-2.9-pull-request: target-m68k: free TCG variables that are not target-m68k: add rol/ror/roxl/roxr instructions target-m68k: Inline shifts target-m68k: Do not cpu_abort on undefined insns target-m68k: Implement 680x0 movem target-m68k: add cas/cas2 ops target-m68k: add abcd/sbcd/nbcd target-m68k: add 680x0 divu/divs variants target-m68k: add 64bit mull target-m68k: add cmpm target-m68k: Split gen_lea and gen_ea target-m68k: Delay autoinc writeback Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27target-m68k: free TCG variables that are notLaurent Vivier
This is a cleanup patch. It adds call to tcg_temp_free() when it is missing. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-12-27target-m68k: add rol/ror/roxl/roxr instructionsLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-12-27target-m68k: Inline shiftsRichard Henderson
Also manage word and byte operands and fix the computation of overflow in the case of M68000 arithmetic shifts. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1478699171-10637-4-git-send-email-rth@twiddle.net>
2016-12-27target-m68k: Do not cpu_abort on undefined insnsRichard Henderson
Report this properly via exception and, importantly, allow the disassembler the chance to tell us what insn is not handled. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1478699171-10637-3-git-send-email-rth@twiddle.net> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2016-12-27target-m68k: Implement 680x0 movemLaurent Vivier
680x0 movem can load/store words and long words and can use more addressing modes. Coldfire can only use long words with (Ax) and (d16,Ax) addressing modes. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1478699171-10637-2-git-send-email-rth@twiddle.net>
2016-12-27target-m68k: add cas/cas2 opsLaurent Vivier
Implement CAS using cmpxchg. Implement CAS2 using helper and either cmpxchg when the 32bit addresses are consecutive, or with parallel_cpus+cpu_loop_exit_atomic() otherwise. Suggested-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-12-27target-m68k: add abcd/sbcd/nbcdLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-12-27target-m68k: add 680x0 divu/divs variantsLaurent Vivier
Update helper to set the throwing location in case of div-by-0. Cleanup divX.w and add quad word variants of divX.l. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twidle.net> [laurent: modified to clear Z on overflow, as found with risu]
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-07 03:21:13 +0000