aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-04-19arm/realview: Fix mapping of PCI regionsPeter Maydell
Fix the mapping of the PCI regions for the realview board, which were all incorrect. (This was never noticed because the Linux kernel doesn't actually include a PCI driver for the realview boards.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-19versatile_pci: Implement the PCI controller's control registersPeter Maydell
The versatile_pci PCI controller has a set of control registers which handle the mapping between PCI and system address spaces. Implement these registers (though for now they have no effect since we don't implement mapping PCI space into system memory at all). The most natural order for our sysbus regions has the control registers at the start, so move all the others down one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-19versatile_pci: Implement the correct PCI IRQ mappingPeter Maydell
Implement the correct IRQ mapping for the Versatile PCI controller; it differs between realview and versatile boards, but the previous QEMU implementation was correct only for the first PCI card on a versatile board, since we weren't swizzling IRQs based on the slot number. Since this change would otherwise break any uses of PCI on Linux kernels which have an equivalent bug (since they have effectively only been tested against QEMU, not real hardware), we implement a mechanism for automatically detecting those broken kernels and switching back to the old mapping. This works by looking at the values the kernel writes to the PCI_INTERRUPT_LINE register in the config space, which is effectively the interrupt number the kernel expects the device to be using. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-04-19versatile_pci: Put the host bridge PCI device at slot 29Peter Maydell
On real hardware the host bridge appears as a PCI device in slot 29, so make QEMU put its host bridge in that slot too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-19versatile_pci: Use separate PCI I/O space rather than system I/O spacePeter Maydell
Rather than overloading the system I/O space (which doesn't even make any sense on ARM) for PCI I/O, create an memory region in the PCI controller and use that to represent the I/O space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-19versatile_pci: Change to subclassing TYPE_PCI_HOST_BRIDGEPeter Maydell
Change versatile_pci to subclass TYPE_PCI_HOST_BRIDGE and generally handle PCI in a more QOM-like fashion. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-19versatile_pci: Update to realize and instance init functionsPeter Maydell
Update the Versatile PCI controller to use a realize function rather than SysBusDevice::init. To reflect the fact that the 'realview_pci' class is taking most of its implementation from 'versatile_pci' (and to make the QOM casts work) we make 'realview_pci' a subclass of 'versatile_pci'. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-19versatile_pci: Expose PCI I/O region on Versatile PBPeter Maydell
Comments in the QEMU source code claim that the version of the PCI controller on the VersatilePB board doesn't support the PCI I/O region, but this is incorrect; expose that region, map it in the correct location, and drop the misleading comments. This change removes the only currently implemented difference between the realview-pci and versatile-pci models; however there are other differences in not-yet-implemented functionality, so we retain the distinction between the two device types. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-19versatile_pci: Fix hardcoded tabsPeter Maydell
There is just one line in this source file with a hardcoded tab indent, so just fix it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paul Brook <paul@codesourcery.com>
2013-04-19m25p80: Remove bogus include of devices.hPeter Crosthwaite
I think in the early revisions of this we had an instantiation helper for the device in devices.h. This was later removed and this header was left over. Removed Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-19ssh: Remove unnecessary use of strlen function.Richard W.M. Jones
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-19block/ssh: Add missing gcc format attributesStefan Weil
Now gcc will check whether format string and variable arguments match. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-19linux-user: change do_semop to return target errno when unsuccessfulPetar Jovanovic
do_semop() is called from two places, and one of these fails to convert return error to target errno when semop fails. This patch changes the function to always return target errno in case of an unsuccessful call. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-19w64: Fix compiler warnings (wrong format specifier)Stefan Weil
GetLastError() returns a DWORD value which is unsigned long, so the correct format specifier is %lu. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-19Remove unneeded type castsStefan Weil
cpu_physical_memory_read, cpu_physical_memory_write take any pointer as 2nd argument without needing a type cast. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-19virtio.h: drop unused function prototypesLuiz Capitulino
They are unused since commit 5c7d0962f60498c3f11d402e1c857cb9d5d8568d. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-19bswap: fix compiler warningAlexey Kardashevskiy
The bswap functions use memcpy but the bswap.h header itself does not seem to include it in some configuration such as cross compiling for powerpc64 on x86_64 machine. The patch explicitly includes string.h. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-19vhost: Add vhost_commit callback for SeaBIOS ROM region re-mappingNicholas Bellinger
This patch follows MST's recommendation to move checks for vhost_verify_ring_mappings() -> cpu_physical_memory_map() operations from MemoryListener->region_[add,del]() -> vhost_set_memory() into final MemoryListener->commit() -> vhost_commit() callback. It addresses the case where virtio-scsi vq ioport RAM re-mapping to read-only SeaBIOS ROM triggers a cpu_physical_memory_map() NIL MemoryRegionSection pointer failure. Also save vhost_dev->mem_changed_[start,end]_addr values in vhost_set_memory() for final ranges_overlap checks. (Thanks Paolo!) Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-19scsi: VMWare PVSCSI paravirtual device implementationDmitry Fleytman
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> [ Rename files to vmw_pvscsi, fix setting of hostStatus in pvscsi_request_cancelled - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-19scsi: avoid assertion failure on VERIFY commandPaolo Bonzini
A verify command is not an actual read (we do not implement compare mode) and thus does not have an AIOCB attached. Do not crash in scsi_dma_complete. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-19linux-user: fix setgroups/getgroups for non-UID16 archsAndreas Schwab
Don't assume target_id is a short. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-04-19linux-user: fix undefined shift in copy_to_user_fdsetAndreas Schwab
If TARGET_ABI_BITS is bigger than 32 we shift by more than the size of int. Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-04-19linux-user: change do_semop to return target errno when unsuccessfulPetar Jovanovic
do_semop() is called from two places, and one of these fails to convert return error to target errno when semop fails. This patch changes the function to always return target errno in case of an unsuccessful call. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-04-18configure: remove duplicate testPaolo Bonzini
We already had a test to add -march=i486 when needed. Make the existing test independent of vhost-net, so that it is also used under Win32. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: CONFIG_NO_XEN is duplicatedPaolo Bonzini
We already define it in Makefile.target. But we need to avoid a curious double negation in order to eliminate it. Tested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: eliminate target_libs_softmmuPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: move common libraries to config-host.makPaolo Bonzini
Move -lm to the end of the line, so that it can be picked up as a dependency by pixman in the static build case. Reviewed-by: Peter Maydell <peter.maydell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: move CONFIG_QEMU_LDST_OPTIMIZATION to config-host.makPaolo Bonzini
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: use abi_llong/ullong instead of target_llong/ullongPaolo Bonzini
The alignment is a characteristic of the ABI, not the CPU. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: only give abi_long/ulong the alignment specified by the targetPaolo Bonzini
Previously, this was done for target_long/ulong, and propagated to abi_long/ulong via a typedef. But target_long/ulong should not have any specific alignment, it is never used to access guest memory. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: use abi_int/uint instead of target_int/uintPaolo Bonzini
The alignment is a characteristic of the ABI, not the CPU. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: use abi_short/ushort instead of target_short/ushortPaolo Bonzini
The alignment is a characteristic of the ABI, not the CPU. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: use tswapreg consistently in elf_core_copy_regsPaolo Bonzini
Reviewed-by: Peter Maydell <peter.maydell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: fix size of registers for N32Paolo Bonzini
Registers are 64-bit in size for the MIPS n32 ABI. Define target_elf_greg_t accordingly, and use the correct function to do endian swaps. Reviewed-by: Peter Maydell <peter.maydell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18elfload: fix size of ABI-dependent fields in core dumpsPaolo Bonzini
Some fields in core dumps are 32-bit in 32-or-64 environments (ppc64abi32, sparc32plus). Use abi_long/ulong for those. Also, the fields of target_elf_siginfo are ints. Use tswap32 to convert them. Reviewed-by: Peter Maydell <peter.maydell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: QEMU_INCLUDES are the same for all subtargetsPaolo Bonzini
Reviewed-by: Peter Maydell <peter.maydell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure/Make: Build libfdt from submodule DTCPeter Crosthwaite
Configure to use the DTC submodule to build libfdt when no system libfdt is found. Prompt to install the DTC submodule if --enable-fdt is set but no DTC can be found. DTC has no out-of-tree build capability, so the configure will symlink the Makefile and scripts directory in the out of tree build directory and pass in all the needed DTC arguments to make out of tree build happen. Ideally we fix the DTC make to support out of tree, but did it this way to avoid commits to DTC. Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18dtc: add submodulePeter Crosthwaite
Add dtc submodule as a fallback for old distros. Picking version 1.3.0. as this is the most recently tagged stable version. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18configure: Put cross compile flags in EXTRA_CFLAGSPeter Crosthwaite
The cross compile CFLAGS are needed to properly build pixman (and any other submodules). Only the EXTRA_CFLAGS set is passed to submodules not QEMU_CFLAGS, so put the cross compile flags in EXTRA_CFLAGS instead. Signed-off-by: Peter Crosthwaite peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-17vmxcap: Update according to SDM of January 2013Jan Kiszka
This adds reporting of VMCS shadowing, #VE, IA32_SMBASE, unrestricted VMWRITE and fixes the range of the MSEG revision ID. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-17target-i386: kvm: save/restore steal time MSRMarcelo Tosatti
Read and write steal time MSR, so that reporting is functional across migration. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-17vmxcap: Report APIC register emulation and RDTSCP controlJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-17vmxcap: Augment reported informationJan Kiszka
Parse the Basic VMX Information MSR and add the bit for the new posted interrupts. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-17vmxcap: Open MSR file in unbuffered modeJan Kiszka
Python may otherwise decide to to read larger chunks, applying the seek only on the software buffer. This will return results from the wrong MSRs. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-17virtio-net: cleanup: init and exit function.KONRAD Frederic
This remove old init and exit function as they are no longer needed. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1365690602-22729-8-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17virtio-net: cleanup: use QOM cast.KONRAD Frederic
As the virtio-net-pci and virtio-net-s390 are switched to the new API, we can use QOM casts. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1365690602-22729-7-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17virtio-net-ccw: switch to the new API.KONRAD Frederic
Here the virtio-net-ccw is modified for the new API. The device virtio-net-ccw extends virtio-ccw-device as before. It creates and connects a virtio-net-device during the init. The properties are not modified. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1365690602-22729-6-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17virtio-net-s390: switch to the new API.KONRAD Frederic
Here the virtio-net-s390 is modified for the new API. The device virtio-net-s390 extends virtio-s390-device as before. It creates and connects a virtio-net-device during the init. The properties are not modified. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1365690602-22729-5-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17virtio-net-pci: switch to the new API.KONRAD Frederic
Here the virtio-net-pci is modified for the new API. The device virtio-net-pci extends virtio-pci. It creates and connects a virtio-net-device during the init. The properties are not changed. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1365690602-22729-4-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17virtio-net: add the virtio-net device.KONRAD Frederic
Create virtio-net-device which extends virtio-device, so it can be connected on virtio-bus. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1365690602-22729-3-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 10:53:55 +0000