aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-11-01ipmi: Remove hotplug from IPMI BMCsCorey Minyard
No hotplug support, make sure it doesn't happen. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01pc: memhp: enable nvdimm device hotplugXiao Guangrong
_GPE.E04 is dedicated for nvdimm device hotplug Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01nvdimm acpi: introduce _FITXiao Guangrong
_FIT is required for hotplug support, guest will inquire the updated device info from it if a hotplug event is received As FIT buffer is not completely mapped into guest address space, so a new function, Read FIT whose UUID is UUID 648B9CF2-CDA1-4312-8AD9-49C4AF32BD62, handle 0x10000, function index is 0x1, is reserved by QEMU to read the piece of FIT buffer. The buffer is concatenated before _FIT return Refer to docs/specs/acpi-nvdimm.txt for detailed design Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01nvdimm acpi: introduce fit bufferXiao Guangrong
The buffer is used to save the FIT info for all the presented nvdimm devices which is updated after the nvdimm device is plugged or unplugged. In the later patch, it will be used to construct NVDIMM ACPI _FIT method which reflects the presented nvdimm devices after nvdimm hotplug As FIT buffer can not completely mapped into guest address space, OSPM will exit to QEMU multiple times, however, there is the race condition - FIT may be changed during these multiple exits, so that some rules are introduced: 1) the user should hold the @lock to access the buffer and 2) mark @dirty whenever the buffer is updated. @dirty is cleared for the first time OSPM gets fit buffer, if dirty is detected in the later access, OSPM will restart the access As fit should be updated after nvdimm device is successfully realized so that a new hotplug callback, post_hotplug, is introduced Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01nvdimm acpi: prebuild nvdimm devices for available slotsXiao Guangrong
For each NVDIMM present or intended to be supported by platform, platform firmware also exposes an ACPI Namespace Device under the root device So it builds nvdimm devices for all slots to support vNVDIMM hotplug Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01nvdimm acpi: use common macros instead of magic namesXiao Guangrong
There are some names repeatedly used in acpi code, define them as macros to refine the code Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01acpi nvdimm: rename result_size to dsm_out_buf_sizXiao Guangrong
Rename it as dsm_out_buf_siz is more descriptive Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01nvdimm acpi: compile nvdimm acpi code arch-independentlyXiao Guangrong
As the arch dependent info, TARGET_PAGE_SIZE, has been dropped from nvdimm acpi code, it can be compiled arch-independently Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01acpi nvdimm: fix Arg6 usageXiao Guangrong
As the function only has 5 args, we use local7 instead of it Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01acpi nvdimm: fix ARG3 conflictXiao Guangrong
As ARG3 is a reserved name, we rename it to FARG Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01acpi nvdimm: fix device physical address baseXiao Guangrong
According to ACPI 6.0 spec, "Memory Device Physical Address Region Base" in memdev is defined as "This field provides the Device Physical Address base of the region". This field should be zero in our case Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01acpi nvdimm: fix OperationRegion definitionXiao Guangrong
Based on ACPI spec: RegionOffset := TermArg => Integer However, Named object is not a TermArg. This patch moves OperationRegion to NCAL() and uses localX as its RegionOffset Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01acpi nvdimm: fix wrong buffer size returned by DSM methodXiao Guangrong
Currently, 'RLEN' is the totally buffer size written by QEMU and it is ACPI internally used only. The buffer size returned to guest should not include 'RLEN' itself Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01virtio-crypto: add myself as virtio-crypto and cryptodev backends maintainerGonglei
This patch includes two parts: Cryptodev Backends and virtio-crypto stuff. I can maintain cryptodev backends which introduced by myself. For virtio-crypto stuff, I can share the work with Michael (The whole virtio supporter). Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01virtio-crypto: using bh to handle dataq's requestsGonglei
Make crypto operations are executed asynchronously, so that other QEMU threads and monitor couldn't be blocked at the virtqueue handling context. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01cryptodev: introduce an unified wrapper for crypto operationGonglei
We use an opaque point to the VirtIOCryptoReq which can support different packets based on different algorithms. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01virtio-crypto: add data queue processing handlerGonglei
Introduces VirtIOCryptoReq structure to store crypto request so that we can easily support asynchronous crypto operation in the future. At present, we only support cipher and algorithm chaining. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01virtio-crypto: add control queue handlerGonglei
Realize the symmetric algorithm control queue handler, including plain cipher and chainning algorithms. Currently the control queue is used to create and close session for symmetric algorithm. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01virtio-crypto: set capacity of algorithms supportedGonglei
Expose the capacity of algorithms supported by virtio crypto device to the frontend driver using pci configuration space. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01virtio-crypto-pci: add virtio crypto pci supportGonglei
This patch adds virtio-crypto-pci, which is the pci proxy for the virtio crypto device. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01virtio-crypto: add virtio crypto device emulationGonglei
Introduce the virtio crypto realization, I'll finish the core code in the following patches. The thoughts came from virtio net realization. For more information see: http://qemu-project.org/Features/VirtioCrypto Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30cryptodev: introduce a new cryptodev backendGonglei
The new cryptodev backend named cryptodev-builtin, which realized by QEMU cipher APIs. These APIs can be backed by either nettle or gcrypt. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio-crypto: introduce virtio_crypto.hGonglei
Introduce the virtio_crypto.h which follows virtio-crypto specification. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30cryptodev: add symmetric algorithm operation stuffGonglei
This patch adds session operation and crypto operation stuff in the cryptodev backend, including function pointers and corresponding structures. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30cryptodev: introduce cryptodev backend interfaceGonglei
cryptodev backend interface is used to realize the active work for virtual crypto device. This patch only add the framework, doesn't include specific operations. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio: inline set_host_notifier_internalPaolo Bonzini
This is only called from virtio_bus_set_host_notifier. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio: inline virtio_queue_set_host_notifier_fd_handlerPaolo Bonzini
Of the three possible parameter combinations for virtio_queue_set_host_notifier_fd_handler: - assign=true/set_handler=true is only called from virtio_device_start_ioeventfd - assign=false/set_handler=false is called from set_host_notifier_internal but it only does something when reached from virtio_device_stop_ioeventfd_impl; otherwise there is no EventNotifier set on qemu_get_aio_context(). - assign=true/set_handler=false is called from set_host_notifier_internal, but it is not doing anything: with the new start_ioeventfd and stop_ioeventfd methods, there is never an EventNotifier set on qemu_get_aio_context() at this point. This is enforced by the assertion in virtio_bus_set_host_notifier. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio: use virtio_bus_set_host_notifier to start/stop ioeventfdPaolo Bonzini
ioeventfd_disabled was the only reason for the default implementation of virtio_device_start_ioeventfd not to use virtio_bus_set_host_notifier. This is now fixed, and the sole entry point to set up ioeventfd can be virtio_bus_set_host_notifier. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio: remove ioeventfd_disabled altogetherPaolo Bonzini
Now that there is not anymore a switch from the generic ioeventfd handler to the dataplane handler, virtio_bus_set_host_notifier(assign=true) is always called with !bus->ioeventfd_started, hence virtio_bus_stop_ioeventfd does nothing in this case. Move the invocation to vhost.c, which is the only place that needs it. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio: remove set_handler argument from set_host_notifier_internalPaolo Bonzini
Make virtio_device_start_ioeventfd_impl use the same logic as dataplane to set up the host notifier. This removes the need for the set_handler argument in set_host_notifier_internal. This is a first step towards using virtio_bus_set_host_notifier as the sole entry point to set up ioeventfds. At least now the functions have the same interface, but they still differ in that virtio_bus_set_host_notifier sets ioeventfd_disabled. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30Revert "virtio: Introduce virtio_add_queue_aio"Paolo Bonzini
This reverts commit 872dd82c83745a603d2e07a03d34313eb6467ae4. virtio_add_queue_aio is unused. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio-scsi: always use dataplane path if ioeventfd is activePaolo Bonzini
Override start_ioeventfd and stop_ioeventfd to start/stop the whole dataplane logic. This has some positive side effects: - no need anymore for virtio_add_queue_aio (i.e. a revert of commit 1c627137c10ee2dcf59e0383ade8a9abfa2d4355) - no need anymore to switch from generic ioeventfd handlers to dataplane It detects some errors better: $ qemu-system-x86_64 -object iothread,id=io \ -device virtio-scsi-pci,ioeventfd=off,iothread=io qemu-system-x86_64: -device virtio-scsi-pci,ioeventfd=off,iothread=io: ioeventfd is required for iothread while previously it would have started just fine. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio-blk: always use dataplane path if ioeventfd is activePaolo Bonzini
Override start_ioeventfd and stop_ioeventfd to start/stop the whole dataplane logic. This has some positive side effects: - no need anymore for virtio_add_queue_aio (i.e. a revert of commit 0ff841f6d138904d514efa1d885bcaf54583852d) - no need anymore to switch from generic ioeventfd handlers to dataplane It detects some errors better: $ qemu-system-x86_64 -object iothread,id=io \ -drive id=null,file=null-aio://,if=none,format=raw \ -device virtio-blk-pci,ioeventfd=off,iothread=io,drive=null qemu-system-x86_64: -device virtio-blk-pci,ioeventfd=off,iothread=io,drive=null: ioeventfd is required for iothread while previously it would have started just fine. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio: introduce virtio_device_ioeventfd_enabledPaolo Bonzini
This will be used to forbid iothread configuration when the proxy does not allow using ioeventfd. To simplify the implementation, change the direction of the ioeventfd_disabled callback too. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio: add start_ioeventfd and stop_ioeventfd to VirtioDeviceClassPaolo Bonzini
Allow customization of the start and stop of ioeventfd. This will allow direct start of dataplane without passing through the default ioeventfd handlers, which in turn allows using the dataplane logic instead of virtio_add_queue_aio. It will also enable some code simplification, because the sole entry point to ioeventfd setup will be virtio_bus_set_host_notifier. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio: move ioeventfd_started flag to VirtioBusStatePaolo Bonzini
This simplifies the code and removes the ioeventfd_started and ioeventfd_set_started callback. The only difference is in how virtio-ccw handles an error---it doesn't disable ioeventfd forever anymore. It was the only backend to do so, and if desired this behavior should be implemented in virtio-bus.c. Instead of ioeventfd_started, the ioeventfd_assign callback now determines whether the virtio bus supports host notifiers. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio: move ioeventfd_disabled flag to VirtioBusStatePaolo Bonzini
This simplifies the code and removes the ioeventfd_set_disabled callback. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio: disable ioeventfd as early as possiblePaolo Bonzini
Avoid "tricking" virtio-blk-dataplane into thinking that ioeventfd will be available when it is not. This bug has always been there, but it will break TCG+ioeventfd=on once the dataplane code will be always used when ioeventfd=on. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio/migration: Migrate balloon to VMStateDr. David Alan Gilbert
Replace the load/save with a vmsd. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio/migration: Add VMStateDescription to VirtioDeviceClassDr. David Alan Gilbert
Provide a vmsd pointer for VirtIO devices to use instead of the load/save methods. We'll eventually kill off the load/save methods. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-28Merge remote-tracking branch 'remotes/kraxel/tags/pull-ui-20161028-1' into ↵Peter Maydell
staging braille fixes and improvements. curses fix, switch to cursesw. gtk bugfixes. # gpg: Signature made Fri 28 Oct 2016 13:05:12 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/pull-ui-20161028-1: curses: Use cursesw instead of curses curses: fix left/right arrow translation ui/gtk: Fix non-working DELETE key gtk: fix compilation warning with gtk 3.22.2 Defer BrlAPI tty acquisition to when guest starts using device Add dots keypresses support to the baum braille device Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28Merge remote-tracking branch 'remotes/vivier/tags/m68k-part2-pull-request' ↵Peter Maydell
into staging # gpg: Signature made Fri 28 Oct 2016 09:44:23 BST # gpg: using RSA key 0xF30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" # gpg: aka "Laurent Vivier <laurent@vivier.eu>" # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/m68k-part2-pull-request: MAINTAINERS: update M68K entry target-m68k: immediate ops manage word and byte operands target-m68k: cmp manages word and bytes operands target-m68k: add/sub manage word and byte operands target-m68k: add addressing modes to neg target-m68k: introduce byte and word cc_ops target-m68k: some bit ops cleanup target-m68k: suba/adda can manage word operand target-m68k: and can manage word and byte operands target-m68k: or can manage word and byte operands target-m68k: eor can manage word and byte operands target-m68k: add addressing modes to not target-m68k: Inline addx, subx, negx target-m68k: add dbcc target-m68k: add addressing modes to scc target-m68k: add exg ops target-m68k: add linkl target-m68k: add bkpt instruction Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20161028' ↵Peter Maydell
into staging ppc patch queue 2016-10-28 This pull request supersedes and extends the one from 2016-10-26 (which had a build bug). Highlights: * SLOF (pseries guest firmware) update * Enable a number of extra testcases on ppc / pseries * Added the 'powernv' machine type - Almost enough to be minimally usable - But still missing necessary interrupt controller updates * Cleanup and consolidation of NVRAM handling on several platforms with related firmware * Substantial cleanup to device tree construction * Some more POWER9 instruction emulation * Cleanup to handling of pseries option vectors and CAS reboot handling (host/guest feature negotiation mechanism) * Significant cleanups to handling of PCI devices in test cases * New hotplug event infrastructure * Memory hot unplug support for pseries * Several bug fixes The NVRAM cleanup affects some Sun sparc platforms as well as ppc ones, but have been tested by the sparc maintainer (Mark Cave-Ayland). The test additions also include substantial general changes to the test framework that aren't strictly ppc related. They don't seem to break tests on other platforms, they're for the benefit of enabling tests on ppc and there isn't a specific maintainer for them, so they're included in this tree. # gpg: Signature made Fri 28 Oct 2016 02:37:19 BST # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.8-20161028: (73 commits) ppc: allow certain HV interrupts to be delivered to guests spapr: Memory hot-unplug support spapr: use count+index for memory hotplug spapr: Add DRC count indexed hotplug identifier type spapr: add hotplug interrupt machine options spapr_events: add support for dedicated hotplug event source spapr: update spapr hotplug documentation target-ppc: Add xvcmpnesp, xvcmpnedp instructions target-ppc: add xscmp[eq,gt,ge,ne]dp instructions tests: Add pseries machine to the prom-env-test, too spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameter libqos: Change PCI accessors to take opaque BAR handle tests: Don't assume structure of PCI IO base in ahci-test tests: Use qpci_mem{read,write} in ivshmem-test libqos: Add 64-bit PCI IO accessors tests: Clean up IO handling in ide-test libqos: Implement mmio accessors in terms of mem{read,write} libqos: Add streaming accessors for PCI MMIO tests: Adjust tco-test to use qpci_legacy_iomap() libqos: Better handling of PCI legacy IO ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28Merge remote-tracking branch 'remotes/berrange/tags/pull-qio-2016-10-27-1' ↵Peter Maydell
into staging Merge qio 2016/10/27 v1 # gpg: Signature made Thu 27 Oct 2016 13:54:03 BST # gpg: using RSA key 0xBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/pull-qio-2016-10-27-1: main: set names for main loop sources created vnc: set name for all I/O channels created migration: set name for all I/O channels created char: set name for all I/O channels created nbd: set name for all I/O channels created io: add ability to set a name for IO channels io: Add a QIOChannelSocket cleanup test io: set LISTEN flag explicitly for listen sockets io: Introduce a qio_channel_set_feature() helper io: Use qio_channel_has_feature() where applicable io: Fix double shift usages on QIOChannel features Conflicts: qemu-char.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into stagingPeter Maydell
# gpg: Signature made Thu 27 Oct 2016 22:15:57 BST # gpg: using RSA key 0x7DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jnsnow/tags/ide-pull-request: qemu-iotests: Test creating floppy drives fdc: Move qdev properties to FloppyDrive fdc: Add a floppy drive qdev fdc: Add a floppy qbus macio: switch over to new byte-aligned DMA helpers dma-helpers: explicitly pass alignment into DMA helpers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches # gpg: Signature made Thu 27 Oct 2016 18:15:47 BST # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (23 commits) iotests: Add test for NBD's blockdev-add interface iotests: Add assert_json_filename_equal() method socket_scm_helper: Accept fd directly iotests.py: Allow concurrent qemu instances iotests.py: Add qemu_nbd function qapi: Allow blockdev-add for NBD block/nbd: Use SocketAddress options block/nbd: Accept SocketAddress block/nbd: Add nbd_has_filename_options_conflict() block/nbd: Use qdict_put() block/nbd: Default port in nbd_refresh_filename() block/nbd: Reject port parameter without host block/nbd: Drop trailing "." in error messages qemu-iotests: Fix typo for NFS with IMGOPTSSYNTAX block: Remove bdrv_aio_ioctl() raw: Implement .bdrv_co_ioctl instead of .bdrv_aio_ioctl block: Introduce .bdrv_co_ioctl() driver callback block: Remove bdrv_ioctl() raw-posix: Don't use bdrv_ioctl() block: Use blk_co_ioctl() for all BB level ioctls ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28Merge remote-tracking branch 'remotes/kraxel/tags/pull-seabios-20161027-2' ↵Peter Maydell
into staging seabios: update to 1.10.0 release. # gpg: Signature made Thu 27 Oct 2016 15:50:54 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/pull-seabios-20161027-2: seabios: update to 1.10.0 release. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28curses: Use cursesw instead of cursesSamuel Thibault
Use ncursesw package instead of curses on non-mingw, and check a few functions. Also take cflags from pkg-config, since cursesw headers may be in a separate, non-default directory. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Message-id: 20161015195308.20473-3-samuel.thibault@ens-lyon.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-28curses: fix left/right arrow translationSamuel Thibault
In default VGA font, left/right arrow are glyphs 0x1a and 0x1b, not 0x0a and 0x0b. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Message-id: 20161015195308.20473-2-samuel.thibault@ens-lyon.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-28ui/gtk: Fix non-working DELETE keyThomas Huth
GTK generates key events for the delete key with key->string[0] = 0x7f ... but this does not work right with the readline_handle_byte() function in util/readline.c, since this treats the keycode 127 as backspace. So let's add a special case for the GTK delete key to make this key behave right in the monitor interface of the GTK ui. Buglink: https://bugs.launchpad.net/qemu/+bug/1619438 Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1477570647-7100-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-27 15:35:10 +0000