| Age | Commit message (Collapse) | Author |
|---|
|
On an ARM host, the registers definitions from cpu.h clash
with /usr/include/sys/ucontext.h. As there are unused, just remove
them.
Cc: Jia Liu <proljc@gmail.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
The bswap16 TCG opcode assumes that the high bytes of the temp equal
to 0 before calling it. The ARM backend implementation takes this
assumption to slightly optimize the generated code.
The same implementation is called for implementing the cross-endian
qemu_st16 opcode, where this assumption is not true anymore. One way to
fix that would be to zero the high bytes before calling it. Given the
store instruction just ignore them, it is possible to provide a slightly
more optimized version. With ARMv6+ the rev16 instruction does the work
correctly. For lower ARM versions the patch provides a version which
behaves correctly with non-zero high bytes, but fill them with junk.
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
The TCG arm backend considers likely that the offset to the TLB
entries does not exceed 12 bits for mem_index = 0. In practice this is
not true for at least the MIPS target.
The current patch fixes that by loading the bits 23-12 with a separate
instruction, and using loads with address writeback, independently of
the value of mem_idx. In total this allow a 24-bit offset, which is a
lot more than needed.
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
The options no-kvm, no-kvm-pit, no-kvm-pit-reinjection, and no-kvm-irqchip
should be marked as having no argument.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Instead report them as successfully completed directly on submission, this
has 2 advantages:
1) This matches the timing of interrupt output packets on real hardware,
with the previous async handling, if an ep has an interval of say 500 ms,
then there would be 500+ ms between the submission and the guest seeing the
completion, as we wont do the write back until the qh gets polled again. And
in the mean time the guest may very well have timed out, as the guest can
reasonable expect a much quicker completion.
2) This fixes interrupt output packets potentially getting send twice
surrounding a migration. As we delay the writeback to guest memory until
the qh gets polled again, there is a window between completion and writeback
where migration can happen, in this case the destination will not know
about the completion, and it will execute the packet *again*
But it does also come with a disadvantage:
1) If the actual interrupt out to the real usb device fails, there is no
way to report this back to the guest.
This patch assumes however that interrupt outs in practice never fail, as
they are only used by specialized drivers, which are unlikely to issue illegal
requests (unlike general class drivers which often issue requests which some
devices don't implement). And that thus the advantages outway the disadvantage.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
No functional changes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
When we've no data to return from the interrupt endpoint, return NAK rather
then a 0 length packet.
CC: Alon Levy <alevy@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
I noticed this while making all devices with interrupt endpoints properly
do wakeup. While at it also add wakeup support.
Note that I've not tested this, but returning STALL for an interrupt ep
which has no data is cleary the wrong thing to do.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
uhci_async_cancel() already does a uhci_async_unlink().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
It is possible for device disconnect and the guest trying to reset the port
(because of USB xact errors prior to the disconnect getting signaled) to race,
when we hit this race, the guest will write the port-control register with its
pre-disconnect value + the reset bit set, after which we have a disconnected
device with its port-enabled bit set in its port-control register, which
is no good :)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Add a completions_only flag, and set this when running process_frame for async
completion handling, this fixes 2 issues in a single patch:
1) It makes sure async completed packets get written to guest mem immediately,
even if all the bandwidth for the frame was consumed from the timer run
process_frame. This is necessary as delaying their writeback to the next frame
can cause the completion to get lost on migration.
2) The calling of process_frame from a bh on async completion causes iso
tds to get server more often they should, messing up usb sound class device
timing. By only processing completed packets, the iso tds get skipped fixing
this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Otherwise qemu crashes with non-qxl graphics cards.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Commit c448e8552b0f6135dabddf944a7110f929c08320 (spice: tls
support) added options to the -spice command line. But there
is an inconsistency between the declaration of the option
'x509-dh-key-file' to -spice command line and its parameter
parsing 'x509-dh-file' in function qemu_spice_init.
https://bugs.launchpad.net/qemu/+bug/1035042
Reported-by: Alon Bar-Lev <alon.barlev@gmail.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
When failing a request because the length of the regions described by
the PRDT was too short for the requested number of sectors, the IDE
emulation forgot to update the status register, so that the device would
keep the BSY flag set indefinitely.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Without this, s->nsector can become negative and badness happens (trying
to malloc huge amount of memory and glib calls abort())
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
rbd / rados tends to return pretty often length of writes
or discarded blocks. These values might be bigger than int.
The steps to reproduce are:
mkfs.xfs -f a whole device bigger than int in bytes. mkfs.xfs sends
a discard. Important is that you use scsi-hd and set
discard_granularity=512. Otherwise rbd disabled discard support.
Signed-off-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
It's poor symbol hygiene to provide a global symbols that collide with a
common library like libuuid. If QEMU links against a shared library
that depends on uuid_generate() it can end up calling our stub version
of the function.
This exact scenario happened with GlusterFS libgfapi.so, which depends
on libglusterfs.so's uuid_generate().
Scope the uuid stubs for vdi.c only and avoid affecting other shared
objects.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
|
|
For hdev, floppy, and cdrom, the reopen() handlers are the same as
for the file reopen handler. For floppy and cdrom types, however,
we keep O_NONBLOCK, as in the _open function.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Having a qemu command line argument like "-vnc 127.0.0.1:0,to=99" is broken.
This have been break with commit 879e45c72da1569e07fbbc6a1aa2a708ea796044.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
|
|
Signed-off-by: malc <av1474@comtv.ru>
|
|
For tap, we currently assume the vnet header size is 10
(the default value) but that might not be the case
if tap is persistent and has been used by qemu previously.
To fix, set host header size in tap device on open.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: malc <av1474@comtv.ru>
|
|
Signed-off-by: malc <av1474@comtv.ru>
|
|
Thanks to Alexander Graf for heads up.
Signed-off-by: malc <av1474@comtv.ru>
|
|
* kiszka/queues/slirp:
slirp: Add domain-search option to slirp's DHCP server
slirp: Don't crash on packets from 0.0.0.0/8.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
* bonzini/build-urgent:
Makefile: Add missing dependency (fix parallel builds)
tests: link in stubs
libcacard: link in stubs
libcacard: make unnesting rules available to Makefile.objs
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
* kwolf/for-anthony: (26 commits)
qemu-io: Use bdrv_drain_all instead of qemu_aio_flush
megasas: Use bdrv_drain_all instead of qemu_aio_flush
vmdk: Fix data corruption bug in WRITE and READ handling
fdc: remove last usage of FD_STATE_SEEK
fdc: fix typo in zero constant
fdc: remove double affectation of FD_MSR_CMDBUSY flag
fdc-tests: add tests for VERIFY command
fdc: implement VERIFY command
fdc-test: Check READ ID
fdc: fix false FD_SR0_SEEK
fdc: fix FD_SR0_SEEK for initial seek on DMA transfers
fdc: fix FD_SR0_SEEK for non-DMA transfers and multi sectors transfers
fdc: use status0 field instead of a local variable
fdc-test: add tests for non-DMA READ command
fdc-test: insert media before fuzzing registers
fdc-test: split test_media_change() test, so insert part can be reused
fdc: Remove status0 parameter from fdctrl_set_fifo()
aio: rename AIOPool to AIOCBInfo
aio: use g_slice_alloc() for AIOCB pooling
aio: switch aiocb_size type int -> size_t
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
* kraxel/usb.71:
usb-host: fix splitted transfers
usb-host: update tracing
usb-redir: Set default debug level to warning
usb-redir: Only add actually in flight packets to the in flight queue
ehci: handle dma errors
ehci: keep the frame timer running in case the guest asked for frame list rollover interrupts
ehci: Don't verify the next pointer for periodic qh-s and qtd-s
ehci: Better detection for qtd-s linked in circles
ehci: Fixup q->qtdaddr after cancelling an already completed packet
ehci: Don't access packet after freeing it
usb: host-linux: Ignore parsing errors of the device descriptors
usb-host: scan for usb devices when the vm starts
usb: Fix (another) bug in usb_packet_map() for IOMMU handling
fix live migration
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
* stefanha/tracing:
trace: Remove "info trace" from documents
trace: document '-' syntax for disabling events
trace: allow disabling events in events file
Avoid all systemtap reserved words
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
* amit/loadvm-irq-inj-fix:
virtio-serial-bus: post_load send_event when vm is running
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
* afaerber/qom-cpu:
target-i386: Add Haswell CPU model
target-i386/cpu: Add new Opteron CPU model
target-i386/cpu: Name new CPUID bits
qapi-types.h: Don't include qemu-common.h
osdep: Move qemu_{open,close}() prototypes
qemu-config.h: Include headers it needs
vnc-palette.h: Include <stdbool.h>
qemu-fsdev-dummy.c: Include module.h
qdev: Split up header so it can be used in cpu.h
Move qemu_irq typedef out of qemu-common.h
qemu-common.h: Comment about usage rules
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
* qemu-kvm/uq/master:
kvm: Actually remove software breakpoints from list on cleanup
acpi_piix4: fix migration of gpe fields
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
There is no /dev/random on win32.
Cc: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The executables in i386-softmmu, i386-linux-user, ...
depend on the recently added libqemustub.a.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The operations for INDEX_op_deposit_i32 and INDEX_op_deposit_i64
are now supported and enabled by default.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Commit 32761257c0b9fa7ee04d2871a6e48a41f119c469 enabled
qemu_ld/st optimization unconditionally for some hosts.
The TCG interpreter still does not support this kind of
optimization. Therefore builds with TCI fail with an
unresolved symbol tcg_out_tb_finalize. This is fixed here.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
commit 5f7319cd introduced GETPC() usage for MIPS, which is currently
not defined when building with --enable-tcg-interpreter. Add MIPS to
the list of targets we selectively define GETPC() for.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Weak symbols were a nice idea, but they turned out not to be a good one.
Toolchain support is just too sparse, in particular llvm-gcc is totally
broken.
This patch uses a surprisingly low-tech approach: a static library.
Symbols in a static library are always overridden by symbols in an
object file. Furthermore, if you place each function in a separate
source file, object files for unused functions will not be taken in.
This means that each function can use all the dependencies that it needs
(especially QAPI stuff such as error_setg).
Thus, all stubs are placed in separate object files and put together in
a static library. The library then is linked to all programs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Debian Wheezy has version 0.1.0 which is not compatible, avoid it.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
* 'vga.1' of git://git.kraxel.org/qemu:
vga: fix mmio vga register mapping
vga: fix bochs alignment issue
|
|
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
