aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-10-20target-sparc: fix FMOVr instructionAurelien Jarno
Like the MOVr instruction, the FMOVr instruction has the condition encoded between bits 10 and 12. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20hw/pl031: Use LOG_GUEST_ERRORPeter Maydell
Use LOG_GUEST_ERROR rather than hw_error or direct fprintf. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20hw/pl022: Use LOG_UNIMP and LOG_GUEST_ERRORPeter Maydell
Use LOG_UNIMP and LOG_GUEST_ERROR where appropriate rather than hw_error(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20hw/pl011: Use LOG_UNIMP and LOG_GUEST_ERRORPeter Maydell
Use the new LOG_UNIMP and LOG_GUEST_ERROR logging types rather than hw_error(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20hw/pl190: Use LOG_GUEST_ERRORPeter Maydell
If the guest attempts an offset to a nonexistent register, just log this via LOG_GUEST_ERROR rather than killing QEMU with a hw_error. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20hw/pl041: Use LOG_UNIMPPeter Maydell
Use the new LOG_UNIMP tracing to report unimplemented features. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20hw/pl181: Use LOG_UNIMP and LOG_GUEST_ERRORPeter Maydell
Rather than a mix of direct printing to stderr and aborting via hw_error(), use LOG_UNIMP and LOG_GUEST_ERROR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20hw/hw.h: Add include of qemu-log.hPeter Maydell
Add an include of qemu-log.h to hw.h, so that device model code has access to these logging functions without the need to directly include qemu-log.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20qemu-log: Add new log category for guest bugsPeter Maydell
Add a new category for device models to log guest behaviour which is likely to be a guest bug of some kind (accessing nonexistent registers, reading 32 bit wide registers with a byte access, etc). Making this its own log category allows those who care (mostly guest OS authors) to see the complaints without bothering most users. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Remove cpu_tmp0 as a globalRichard Henderson
Subroutines do their own local temporary management. Within disas_sparc_insn we limit the existance of the variable to OP=2 insns, and delay initialization as late as is reasonable for the specific XOP. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Make cpu_dst local to OP=2 insnsRichard Henderson
And initialize it such that it (may) write directly to rd. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Only use cpu_dst for eventual writes to a gprRichard Henderson
Use cpu_tmp0 for other stuff, like Write Priv Register. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Remove last uses of cpu_tmp64Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Remove cpu_tmp64 use from softint insnsRichard Henderson
The use of "tl" functions and a tmp64 is logically incompatible. Use cpu_tmp0 instead. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Don't use a temporary for gen_dest_fpr_DRichard Henderson
In all cases we don't have write-before-read problems. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Remove usage of cpu_tmp64 from most helper functionsRichard Henderson
Use a locally allocated temporary instead. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Tidy ldfsr, stfsrRichard Henderson
Remove the last uses of cpu_tmp32. Unify the code between sparc64 and sparc32 by using the proper "tl" functions. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Avoid cpu_tmp32 in Write Priv RegisterRichard Henderson
No need to copy to a temporary to store 32 bits. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Avoid cpu_tmp32 in Read Priv RegisterRichard Henderson
We don't need another temporary here. Load directly into the register we want to set. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Use get_temp_i32 in gen_dest_fpr_FRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Split out get_temp_i32Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Make the cpu_addr variable local to load/store handlingRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Cleanup cpu_src[12] allocationRichard Henderson
Now that get_temp_tl is used for get_src[12], we don't need to pre-allocate these temporaries. Fallout from this is moving some assignments around cas/casx to avoid uninitialized variable warnings. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Finish conversion to gen_load_gprRichard Henderson
All users of gen_movl_{reg_TN,TN_reg} are removed. At the same time, make cpu_val a local variable for load/store disassembly. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Convert swap to gen_load/store_gprRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Convert asi helpers to gen_*_gprRichard Henderson
Push the DisasContext down so that we can use gen_load/store_gpr in sode gen_ldda_asi, gen_stda_ast, gen_cas_asi, gen_casx_asi. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Use gen_load_gpr in get_src[12]Richard Henderson
This means we can avoid the incoming temporary, though the cleanup of the existing temporaries is not performed in this patch. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Conversion to gen_*_gpr, part 1Richard Henderson
Only handle the easy cases directly within disas_sparc_insn. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20target-sparc: Add gen_load/store/dest_gprRichard Henderson
Infrastructure to be used to clean up handling of temporaries. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20exec: Make MIN_CODE_GEN_BUFFER_SIZE private to exec.cRichard Henderson
It is used nowhere else, and the corresponding MAX_CODE_GEN_BUFFER_SIZE also lives there. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20exec: Allocate code_gen_prologue from code_gen_bufferRichard Henderson
We had a hack for arm and sparc, allocating code_gen_prologue to a special section. Which, honestly does no good under certain cases. We've already got limits on code_gen_buffer_size to ensure that all TBs can use direct branches between themselves; reuse this limit to ensure the prologue is also reachable. As a bonus, we get to avoid marking a page of the main executable's data segment as executable. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20exec: Do not use absolute address hints for code_gen_buffer with -fpieRichard Henderson
The hard-coded addresses inside alloc_code_gen_buffer only make sense if we're building an executable that will actually run at the address we've put into the linker scripts. When we're building with -fpie, the executable will run at some random location chosen by the kernel. We get better placement for the code_gen_buffer if we allow the kernel to place the memory, as it will tend to to place it near the executable, based on the PROT_EXEC bit. Since code_gen_prologue is always inside the executable, this effect is easily seen at the end of most TB, with the exit_tb opcode, and with any calls to helper functions. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20exec: Don't make DEFAULT_CODE_GEN_BUFFER_SIZE too largeRichard Henderson
For ARM we cap the buffer size to 16MB. Do not allocate 32MB in that case. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20exec: Split up and tidy code_gen_bufferRichard Henderson
It now consists of: A macro definition of MAX_CODE_GEN_BUFFER_SIZE with host-specific values, A function size_code_gen_buffer that applies most of the reasoning for choosing a buffer size, Three variations of a function alloc_code_gen_buffer that contain all of the logic for allocating executable memory via a given allocation mechanism. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20create struct for machine initialization argumentsEduardo Habkost
This should help us to: - More easily add or remove machine initialization arguments without having to change every single machine init function; - More easily make mechanical changes involving the machine init functions in the future; - Let machine initialization forward the init arguments to other functions more easily. This change was half-mechanical process: first the struct was added with the local ram_size, boot_device, kernel_*, initrd_*, and cpu_model local variable initialization to all functions. Then the compiler helped me locate the local variables that are unused, so they could be removed. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20vga: remove CONFIG_BOCHS_VBEGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20vga: add specs for standard vgaGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20vga: add mmio bar to standard vgaGerd Hoffmann
This patch adds a mmio bar to the qemu standard vga which allows to access the standard vga registers and bochs dispi interface registers via mmio. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20vga: fix indentionGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-19tests/tcg: fix buildCatalin Patulea
This broke when the tests were moved from tests/ to tests/tcg/. On x86_64 host/i386-linux-user non-kvm guest, test-i386 and test-mmap are broken, but at least they build. To build/run the tests: $ cd $BUILD_PATH/tests/tcg $ SRC_PATH=path/to/qemu make <target> Signed-off-by: Catalin Patulea <catalinp@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-19allow make {dist, }clean work w/out configureMike Frysinger
There's no reason to require configure to run before running a clean target, so check MAKECMDGOALS before. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-19tci: fix build breakage for target-sparcMichael Roth
commit c28ae41 introduced GETPC() usage for sparc, which is currently not defined when building with --enable-tcg-interpreter. Add sparc to the list of targets we selectively define GETPC() for. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-19MAINTAINERS: Update email address for Stefan HajnocziStefan Hajnoczi
Switch to my new work email address from which I am contributing. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-19configure: Fix CONFIG_QEMU_HELPERDIR generationJan Kiszka
We need to evaluate $libexecdir in configure, otherwise we literally end up with "${prefix}/libexec" instead of the absolute path as CONFIG_QEMU_HELPERDIR. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-19qemu-options.hx: Change from recommending '?' to 'help'Peter Maydell
Update the -help output and documentation so that it recommends 'help' rather than '?' for the various "list valid values for this option" cases. '?' is deprecated (as it can fail confusingly if not quoted), so it's better to steer users towards 'help'. ('?' still works, for backwards compatibility.) This is the -help option part of the change otherwise done in commit c8057f9, since we are now past release 1.2 and free to change our help text without worrying about breaking libvirt. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-19Merge branch 'linux-user-for-upstream' of ↵Aurelien Jarno
git://git.linaro.org/people/rikuvoipio/qemu * 'linux-user-for-upstream' of git://git.linaro.org/people/rikuvoipio/qemu: linux-user: register align p{read, write}64 linux-user: ppc: mark as long long aligned tcg: Remove TCG_TARGET_HAS_GUEST_BASE define configure: Remove unnecessary host_guest_base code linux-user: If loading fails, print error as string, not number linux-user: Fix siginfo handling alpha-linux-user: Fix sigaltstack structure definition linux-user: Implement gethostname linux-user: Perform more checks on iovec lists linux-user: fix multi-threaded /proc/self/maps linux-user: fix statfs
2012-10-19Merge branch 'trivial-patches' of git://github.com/stefanha/qemuAurelien Jarno
* 'trivial-patches' of git://github.com/stefanha/qemu: ui/vnc-jobs.c: Fix minor typos in comments net/tap-win32: Fix compiler warning caused by missing include statement configure: Remove unused parameters from main function target-arm/neon_helper: Remove obsolete FIXME comment targphys.h: Don't define target_phys_addr_t for user-mode emulators ui/vnc: Only report/use TIGHT_PNG encoding if enabled.
2012-10-19microblaze: Update PC before simulating syscallEdgar E. Iglesias
Fixes a clone() emulation bug were the new thread starts at the point of the syscall and thus clones in a loop. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-10-19microblaze: Support setting of TLS ptrEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-10-19ui/vnc-jobs.c: Fix minor typos in commentsPeter Maydell
Fix some minor typos/grammar errors in comments. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 18:42:08 +0000